PE9 Drops video during import of mt2s with VC-1 codec

You can see in the first screenshot that the mt2s files shows up in Premiere Elements as only an audio clip. You can see in the second screenshot the video and audio codes (VC-1 and A52) which are supposed to be supported in PE9 per link below. What am I doing wrong?
http://kb2.adobe.com/cps/862/cpsid_86248.html
Thanks,
http://www.t1shopper.com/

Steve: Sorry, I was posting the same time as you and so missed your post!
Can you at least confirm you've properly set up your project for this video format.
I didn't! So I chagned it to the below (see screenshot) and tried it again but still getting the same result, no video, only audio.
How did you get it into your computer?
This file is off of a Bluray disk that was already encoded as a Bluray movie, so of course those files are in the D:\BDMV\STREAM directory.
Usually, when you use Premiere Elements' Get Media tool to bring in video from an AVCHD camcorder, the video is M2T or MTs format.
Agreed, but that's not the case here.
...ensure that you have the latest version of Quicktime
Yes, I do.
please give us some details from your workflow...
Sure!
Open PE9
Open project with above settings
Click on the Organize -> Get Media tab.
Open the 00001.mt2s file on the Bluray disk
PE9 confirms the file
I preview the file and it's only audio.
Thanks!
PS. Here's what PE9 says the properties of the file are. Note it saysit's an "MPEG Movie."

Similar Messages

Occasionally Freezing Video During Import...Again.

(please excuse me if this has been discussed, but i couldn't find anything about it in a search)
a few OS updates ago, there was a problem with FCP caused by Spotlight where imported video has momentary "freezes" every 30 seconds or so. during these "freezes," the audio continued, but the video locked in a still frame for a few seconds. this problem was fixed by disabling Spotlight in the Preferences window. then an OS update fixed the problem for good.
i'm experiencing the problem again with 10.4.11, is anyone else? i just noticed it, and i haven't yet tried disabling Spotlight, because i use Spotlight and i didn't want to do that...

A simple search of the forum will turn up many posts.
If QT 7.3 is the root of the issue and you do not have a cloned drive to use to restore your bonked system, a full erase and reinstall is in your future.
Some reading for those slack times during the reinstall.
Cheers,
x

Colorized video during import - Appears to be a bad video signal

I went to import about 15 minutes of new footage today and the clips being import are all distorted. It's hard to explain, but it looks as though they're colorized or cartoon looking. Not at all real color tones. And there are horizontal lines through the video.
I've imported previous footage fine before. The only thing new is the new OS, 10.5. Prior to this I've been able to import perfect video and had no problems. I'm using a HDTV camcorder (Canon HV20).
Has anyone experienced this or know what is causing it?
Thanks, Brien

The problem was I was using the previous version of iMovie (5.0.2) and not the latest 6.0.4. Apparently when I download the newer version the installer created a folder called previous version but put the newer version in that folder. So I thought I was using the latest version only to come to find out it was launching the previous version loose in my Applications folder. Obviously a technical glich from Apple that will probably effect a lot of other people over time until they realize this.

Adobe premier cc stopped importing avi files with PCM audio codec, unsupported audio format

We were working just fine using Adobe premier pro cc, we captured videos in avi format video codec MJPEC audio codec PCM. Suddenly, I think after updating using cc, premier stopped importing any file giving the following Error message: The file contains an unsupported Audio format. We have captured more than 4000 hr from our library, and we are still capturing, our work is completlty freezed, we can not export to any format since we can not import in the first place. Our rivals in the market are taking our client and they are using old premier cs6 cracked version, this is ridiculous!! I installed adobe cs6 trial and it is working fine, this is very frustrating.
I tried to insert an image of what gspot is giving me but for a certain reason it is not uploaded. Please help.

What MJPEG codec do you have installed?
MJPEG http://forums.adobe.com/thread/730396
- problems with Samsung codec http://forums.adobe.com/thread/699493
- and Fuji http://forums.adobe.com/thread/1015922

Re:Error during import of Videos from SD card

Holiday Footage taken with an Olympus u Tough 3000, onto a ' 2Gb SD memory card', and then put through a Kingston Card reader Straight into iMovie (Ver: 7.1.4 ),
Starts to load OK, But after taking the prompted steps to import, (and it tells me that it is importing ), A window flags up saying "Error occurred during import, please REVIEW the imported movies CAREFULLY" ! So i click on "OK" the window disappears, and i am left wondering how the **** am i supposed to do that ? .
But whats more, is My videos show as a new file in iMovies and i can see all the clips as thumbnails, but when the reader is ejected, and the card removed, Although a window shows My New 'Camera imports' file, i can niether see nor access the films in any way to do anything with them.
I am a Novice to this area of Mac, So please, be gentle with me ! Can someone Exlpain ( Clearly !) whats happening, and what i need to do ?
There are also photos on the same SD card that i will later want to put into ' Image Capture' So hope your replys will, if neccesssary deal with that too should the problem arise.
Thanks in advance: Saligram.

Holiday Footage taken with an Olympus u Tough 3000, onto a ' 2Gb SD memory card', and then put through a Kingston Card reader Straight into iMovie (Ver: 7.1.4 ),
Starts to load OK, But after taking the prompted steps to import, (and it tells me that it is importing ), A window flags up saying "Error occurred during import, please REVIEW the imported movies CAREFULLY" ! So i click on "OK" the window disappears, and i am left wondering how the **** am i supposed to do that ? .
But whats more, is My videos show as a new file in iMovies and i can see all the clips as thumbnails, but when the reader is ejected, and the card removed, Although a window shows My New 'Camera imports' file, i can niether see nor access the films in any way to do anything with them.
I am a Novice to this area of Mac, So please, be gentle with me ! Can someone Exlpain ( Clearly !) whats happening, and what i need to do ?
There are also photos on the same SD card that i will later want to put into ' Image Capture' So hope your replys will, if neccesssary deal with that too should the problem arise.
Thanks in advance: Saligram.

Video Freezes Momentarily During Import

I am capturing video from my Canon GL2 into my MacBook Pro with Final Cut Express v.1.0.1. During import, video will freeze for a second or 2, but I can still hear audio. If you playback the clip once it is imported, it plays back just the same, with the video freezing and the audio uneffected. This happens almost every time I import. Any idea what I can do for this?
MacBook Pro Mac OS X (10.4.8)
MacBook Pro Mac OS X (10.4.8)

Hey Al,
I changed the Easy Setup to 48khz and it still freezes between 30 and 50 seconds into every import I do. Could this have something to do with my camera heads? Or is it a RAM issue on the MacBook Pro? I am also having problems when I try to batch capture into Final Cut Pro 4.5. It will capture the first clip, but then when it goes to capture the second clip, it gives me the error message "TAPE STILL TRYING TO THREAD". So I am guessing that the problem is most likely with the Canon GL2. Any other suggestions?
Thanks.
Jason

Why are my HD videos all importing with different resolutions?

Hi, I tried looking through like 10 pages of discussions on here and didn't see anybody else having this problem.
I have a Canon Vixia HF200, I keep the settings on MXP (highest quality 1920 x 1080). Every time I log and transfer my videos they import at different resolutions (everything from the same day will be the same), some of them come in as 1440 x 1080, 720 x 480, etc, when they should all be 1920 x 1080.
So, since some of them ended up being a completely different aspect ratio, I went into Motion>Distort and changed them all to 1920 x 1080, and I thought it was fine, but now I'm noticing that some of the videos look really out of focus (it seems like they get more out of focus every time I open it), so I'm thinking I probably shouldn't have stretched them....
I checked the original videos in the browser and they all say 1920 x 1080 now, when I watch them in the viewer, they actually look like good HD videos, but in the canvas they're out of focus...
I'm also working with multiple sequences, and when I copy videos from one sequence to another, it changes the resolution/aspect ratio/scale again, and becomes more blurry when I try to fix it.
So basically, I have a huge mess. I'm working on editing a documentary that I'm making and now most of the video looks bad and I'm not sure how to change it back. I even tried starting a new project and importing the original videos, but they don't seem to have the original quality.
Anybody know how I can either fix this or somehow replace the clips in the sequence with the originals in the browser to at least get some quality back?
Also, a lot of the time when I render, I come back to the computer and it says something like "Error: Illegal (something) render failed" and completely loses the rendering that it spent a long time doing.
I appreciate any help.
Lisa

Hi Lisa,
Your 1920x1080 clips most likely import at their normal frame size, and then you placed them in the wrong sequence. Make sure your +File > Easy Setup+ is set to *Apple Intermediate Codec 1920x1080i60* before you create a new sequence.

I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compresso

I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compressor/decompressor (codec) installed" Where has it gone? Where do I get a new one? I am getting REALLY REALLY fed up with trying to find an answer!!!!!!!!

Try to disable hardware acceleration in Firefox.
*Firefox > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Nikon D3300 NEF files not importing into iPhoto with Yosemite. Videos import, photos come in black

I'm having issues importing NEF (Raw) photos since I upgraded to Yosemite. I also updated iPhoto to the most current version. The videos will import, but the photos are coming in black. I can see them in the Nikon photo viewer on the Mac with no issues.

There are a series of posts on the forum right now detailing issues with Raw support. By no means all folks have them - I don't for instance - but many seem to.
Try the fix in this thread
RAW files suddenly show up as "not supported" (Aperture 3.5.1, OS X 10.10)
which basically trashes the Raw support and reinstalls it on your Mac.
As always, back up first,

Premiere Pro CC v7.0 - MP3s corrupted during import with "Write XMP ID to Files on Import"

Premiere Pro CC v7.0 - original MP3s corrupted during import with default "Write XMP ID to Files on Import" option
I have just started using a Trial version of Premiere.
I have a folder full of corrupted MP3 files after attempting to import them into Premiere.
After searching these forums I found that some other people have had corruption issues during import of media and it was related to the Preferences->Media->"Write XMP ID to Files on Import" option.
I attempted to import additional MP3s (this time making backups first) with and without the Write XMP ID option, and have found that this is where the issue is.
While the MP3 files still fail to be imported, the files are not corrupted in the process when the Write XMP ID option is unchecked.
Writing to files that are being imported seems to me like unexpected behaviour for any software.
Adobe please advise!
Is there any way to recover my original MP3 collection?

What exactly is wrong with them?

RAW files look corrupted with color streaking during import

During import in Lightroom about 25% of my files look corrupted (with color streaks, etc.). The RAW images upload perfectly in iPhoto on the same computer but for some reason will become corrupted in Lightroom. I am able to delete the corrupted images in the LR Library and reload them with about a 50% success rate. I've tried different memory cards, cf importers, etc. Only an issue in LR. Sometimes they export with the streaking and other times they export perfectly fine. Even if they export fine it makes it impossible to edit in LR. Below is an example of how the image appears. Any answers?

Raw files have a camera-embedded JPG.
I would guess the files are corrupt, LR is showing you this corruption, while other programs are only interpreting the JPG and hiding the corruption.
Can you upload one of these photos that iPhoto shows as ok, while LR shows corruption? Upload one to www.dropbox.com <http://www.dropbox.com> and post a public download link, here.

Import swf file with drag & drop action

Hello!
I created a flash animation with drag & drop.
I imported the swf into Captivate 3, but when I publish the
project, the animation don't work.
Can you suggest me some workaround to understand the problem?
Best regards

Hi kpurple and welcome to our community
When you published the project, did you ensure to copy all
the associated files? Normally the added .SWF files exist as
external files that need to exist in the same folder as your
Captivate files.
Cheers... Rick

Transpot Request with return code 4 during Importing

HI All,
During importing the transport request It gave warning with 4.
IIt is with Flat File that is giving
No mapping defined for source system XMFile which ismy flat file ss.
CAn any body help me on that...
Regards,
MAdhu

Hi dear,
Yes, actually there is no need to worry, it i sjust a warning for your import ...
Nevertheless, if you see that your datasource is not connected, check that your falt file source system exists in your target system, and go to RSA1 -> Tools -> Conversion of Logical System Names, to convert the source system ...
Kind regards
Mickael

Drag-drop video into iphone not working

All my music and video all of a sudden disappeared off my iphone (the video podcast still were there though). I was updating and poking around, but I really don't think I delete them accidentally. I've always just dragged and dropped videos from the finder directly onto the iPhone via iTunes and never had problems before. Now after the mysterious missing music and video, I can't drag and drop any more. These are h.264 video files that have worked in the past. If I re-compress the videos in QT pro using Export>Movie to iPhone I can drag and drop. If I choose Export>movie to Quicktime Movie I can't (even though it's worked before and the settings fall within spec... h.264, etc ). ARRRG!
The only thing I haven't done yet is restore the iPhone. I was worried that my camera roll would disappear. Any thoughts? Help!

Copied from my previous post.
Photos in your iPhone's Camera Roll are included with your iPhone's backup, which is updated if needed as the first step during the sync process - if any of the data on your iPhone that is included with the backup has changed since the last sync. But you shouldn't depend on your iPhone's backup alone for these photos. These photos should be imported by an app on your computer as with any other digital camera.
If you use iPhoto on your Mac for photo storage, you can use iPhoto for the import. If not, you can use the Image Capture app located in your Applications folder.
Assuming you are syncing your iPhone with iTunes for other content, your iPhone's backup should be updated as the first step during the sync process if any of the data included with your iPhone's backup has changed since the last sync - which is usually 100% of the time.
If you restore your iPhone from your iPhone's backup, any photos that were in your iPhone's Camera Roll should be restored with your iPhone's backup, but as already provided, you shouldn't depend on your iPhone's backup alone for these photos. Photos in your iPhone's Camera Roll should be imported by an application on your computer as with any other digital camera. If you use iPhoto for photo storage on your Mac, you can use iPhoto for this. If you don't use iPhoto, you can use the Image Capture application for this.
I do download the photos to iTunes, so there is that backup as well.
You don't download any photos to iTunes - not from your iPhone or from anywhere else for that matter. iTunes does not handle the import of photos from the iPhone's Camera Roll or from any digital camera. This must be done with a separate application such as with iPhoto or the Image Capture application on a Mac.
You can transfer photos from your computer to your iPhone via the iTunes sync process - selected under the Photos tab for your iPhone sync preferences, but iTunes does not have anything to do with photos in your iPhone's Camera Roll except for including these photos along with other data for your iPhone's backup.

Error During Import: File Could Not Be Imported

I am trying to load some .AVI movies from my digital camera into iMovie; most of them will, but 1 or 2 for some reason will not. I have played some of these videos on my old G3, which I replaced with this new computer; most loaded in OK.
The clips that won't load look smaller than the others when playing (don't know why). I played the movies and converted them to Quicktime again in MPEG Streamclip and they played fine (also in VLC PLayer, FWIW).
I am getting this error message: Error during Import: File Could Not Be Imported.
Also, I am trying to change the orientation of one clip that I inadvertently shot sideways; I did this in Bitlist but it won't load now into iMovie. Is there away to change the orientation in Quicktime (I'm not buying QT pro) or another free converter that will work?
Thanks in advance...

try to ...
* open the avi/mpegs in Streamclip
* choose 'DV stream' as export option
* in the 'DV stream' dialog, you're offered the option 'turn'.. rotate in the wanted direction and choose '75%' size to get all into the video...

PE9 Drops video during import of mt2s with VC-1 codec

Similar Messages

Maybe you are looking for