[PE9] How do I apply a transition effect to a PIP?

Hi,
I am trying to apply the "dip to white" transition to a PIP clip, however it applies it to the whole screen. Any ideas?
Thanks

You are correct. Transitions, like Cross-Dissolve will "appear" to affect the PiP. Actually, they are still "over" the background, but flow seamlessly. When one does one of the Dip To Transitions, the color that they dip to will still be over the background Video.
To do something visually similar, one could Keyframe The Brightness & Contrast of one PiP Clip to what appears to be almost white, then do the opposite for the next PiP Clip. What I cannot remember is which Effects, like Brightness & Contrast, can be Keyframed in PrE. Some Effects can be Keyframed, but some cannot. [In PrPro, I can Keyframe Brightness & Contrast, but have to do a lot more work with Levels, just because of the way that the Effects work. In PrE, some are similar, but others are not. Just cannot remember, what all the differences are.]
I am still trying to figure out exactly what I would want to see, in lieu of a real Dip to White.
Good luck, and maybe Steve G. has a great idea, from his Tips & Tricks book.
Hunt

Similar Messages

How can I apply drop shadow effects to graphics and pictures? It was very easy in previous versions and I can't find it. Thanks

How can I apply drop shadow effects to graphics and pictures? It was very easy in previous versions of Final Cut and I can’t find it. Thanks

Try this one, works marvelous:
http://www.rippletraining.com/using-the-rt-drop-shadow-in-final-cut-pro-x.html
Regards
Nolan

How can i apply this glowing effect in logo with illustrator?

How can i apply this glowing effect in logo | ThemeForest Community Forums

I would make several copies of the original artwork. On each copy, section the individual areas to be gradients. It looks like you have at least four gradients, both linear and radial. It's just a matter of building each section and then reassembling each. Not too complex, yet nice piece of artwork.

How do I apply a transition to a group of clips?

Hi,
I want to apply a transition to a group of clips. I know how to select a group of clips, but I have not found how to apply the same transition on all of them. Can this be done in FCE?

let:s say I want to apply the default transition to the group, how do I do it?
Place the playhead at the start point in the Timeline.
Select a group of clips that are contiguous.
Drag them to the Canvas Overlay, Overwrite with Transition.
Note: Media Handles must be available or you will get a warning message.
And do I understand wright that I could also do it with a unique transition that I would place it in my >Favorites Bin? How would I do that?
A Favorite works differently. There's no way to alter the Default transition in FCE. The Default is always a one second dissolve.
To make a Favorite you can open an existing transition in the Timeline by double clicking it or just open a transition into the Viewer directly from the Browser. Existing is best as you can setup to see any changes in the Canvas.
It opens in the Viewer with the controls showing.
Placing the Playhead over the transition in the Timeline will give you immediate feedback of the changes in the Canvas.
Make any adjustments like timing, angle, color etc.
Look for a small hand icon at the top right of the Viewer.
Click and drag this to the Favorites Bin.
You will now see the new transition available for use with any new values.
This Favorite can now be used as a transition in the usual way.
There is no way to add the Favorite to more than one clip at a time.
Al

How do I apply a negative effect to my photo?

How the heck do I apply a negative effect to my photo? I scanned one of my shirts and I want to put it into a negative effect! I have NOOOOO idea how to do this and I need to do it really fast!!! PLEASE, SOMEONE HELP ME!!!!!

I REALLY REALLY REALLY REALLY REALLY REALLY REALLY REALLY REALLY REALLY NEED TO KNOW HOW!!! PLEASE help me!!!!

How do you apply a transition to multiple clips? NOT using default transition.

Using CS6
I have videos on one track and titles on another track. I want to apply dissolve to black for the videos and gradient wipe to the titles.
Right now I have to assign dip as the default transition, select all the video, and apply default transition. Then find the gradient wipe, change *that* to the new default transition, select all the titles, and apply default transitions. Then I have to go back and reset my default transition to gradient wipe since that's my "main" default transition.
Uhhhh... why can't we just select a bunch of clips and drag ANY transition to the selection and have it apply just like regular effects? Why force us to do this complicated singular default transition dance?

Hi D. Vivian,
d. vivan wrote:
What you need to do is to select the clips and enable trim (some red brackets will appear at the beginning or end of the clips).
I just marquee drag with the Roll tool to select the edit points.
d. vivan wrote:
Then, right click and Apply default transition.
Or use the keyboard shortcut: Ctrl + D (Windows) or CMD + D (Mac).
Thanks,
Kevin

How do I apply the same effect to all frames in CS5 animation?

I need to add lens flare to all frames at once - but it needs to be applied to the flattened image. I don't want to have to flatten, click lens flare for each of the 70 frames seperately.
Here is the gif and photos illustrating what happens if I select frame one - unflattened and flattened. The spinning globe of course is the animation that is inserted into the surrounding jpeg: http://bobwoolcock.com/images/300_Jiminy-Glick.gif

Could this filter not be applied to a separate black Layer, that sez to Blend Mode Screen and extended in the Animation Panel in Timeline Animation instead of Frame Animation?

How do I apply the Letterbox effect to the whole of my video?

... without exporting it? I would also like to put some colouring fx to the final product as well... is it possible without an export then importing it back in?

If you want a different aspect ratio than 16:9 in a 16:9 project, or 4:3 in a 4:3 project, you could select your whole timeline and turn it into a compound clip and add the Widescreen effect to the compound clip. You can also use the Color Board to modify the colours throughout the video at the same time.
I've made a widescreen title generator effect with many more aspect ratios that is a free download from my blog.
You attach it to a clip in your timeline, and change the start and end point to match the duration of your project. It adds the widescreen matte to every storyline below it in the timeline.
Alex4D

How do I apply a fade to the end of an audio track?

I'm using Captivate 7, and have added one of the Gallery sounds to a slide in my software simulation. I want the track to fade at the end of slide, so I guess I need to apply an effect. All the help refers to "clicking the triangle next to the audio track name" to expand the track for editing, then goes on to talk about keyframes. I don't see a triangle next to the track name, or next to anything related to the track. I am in the Effects workspace. Also, on the EFFECTS tab, all the selections are grayed out.
I also tried adding a fade by using the settings on the PROPERTIES tab, but it doesn't affect the playback.
How do I apply a fade effect?

Effects have no relation whatsoever with audio clips, I don't understand why you were looking there.
You can edit audio, and to get into the editor there are several ways. If this is slide audio, the clip is visible on the timeline and right-click menu has an option Edit. Another way is to find the clip in the Library, and the right-click menu on its name has more options, not only Edit in Captivate, but you can also use another application which I would recommend. The audio editor in Captivate is pretty limited, I'm using Audition, but Audacity is free to use.
For an easy way to have a fade out (you can time it, not the way of fading like in a real audio editor), you don't even need the audio editor in Captivate. Look in the Properties panel, part Audio and you'll have Fade in and Fade out.

How to get cross square pattern effect in AI?

Hi Guys,
Please see the following screen shot. This effect how I can get in Illustrator CS4? Since there is no direction I am drawing lines manually.
FYI: I tried to create swatch for this. But not giving right results.
So, I just want to know whether is there any way to get this effect easily or this is the only way what I have now?
Please share your opinions.
Thanks in advance.
Regards
HARI

Hi Jacob Bugge
Thanks for your reply. You mean that I did not create the swatch correctly?
FYI: I crated swatch like, how Mike Gondek told.
   1. To make a pattern of this draw a square with no fill or stroke on top of your lines.
   2. Cut the square, select the lines, and use paste in back
   3. Select the lines and the square and drag this to your swatches palette, you will get a icon for a pattern swatch
The empty square defines the bounding box for your pattern, and must be the backmost element in your selection.
Hi Mike Gondek
Could you please explain clearly, how I can use the Transform Effect. Because I do have different type of objects like following screen shot. If you see the marked red color area, for that how I can apply this transform effect.
Regards
HARI

Transition effects between the states..?

Hi, There.
How I can set the "Transition effects" between the states please?. When I add the different photos to the several states, I want to set the transition effects like "Fade". Help me anyone please.
Thanks

Try to make a few more transitional states in between with varying levels of opacity for each picture (and play with the State Delay time). Other than that, i don't think Fireworks has transitional effects for slideshows (i may be wrong).

APPLY A BENDING EFFECT

hello everybody!
how could I apply a bending effect to a frame? (turn a rectangular frame into an arch shape, as it could be applied to writing)

Go to the Custom shape tool and look for "Banners & Awards" library. In that there is a flag shape.
Drag out the shape, and simplify the shape layer
CTRL+left click the layer thumbnail in order to load the shape
Open a blank layer layer at the top, go to Edit>Stroke (outline) selection. Place the stroke inside, width to suit (try 20px)
Turn off visibility of Shape 1 layer, or delete it

Slideshow Transition Effect

Hi! could someone name, or tell me how to generate, the
specific Transition Effect on this site:
brettco.us ?
If there is a 3rd party program such as JetPhoto or
FlashGallery Generator that will create this effect, please let me
know -- I'd love to minimize complexity and use such a program.
Thanks!

I don't know that there's any readily available gallery for
this, but there may be one like it for sale online if you search
around.
In looking at it closely, it appears to be a case of using an
animated mask (two mask pieces moving/expanding) over an image that
is being tweened from dark to light. So it probably involves
sequential placement of movieclips one atop another, where each
movieclip contains what I just described.

Clapboard Transition Effect

Hi all,
I'm relatively new to FinalCut Express and am wondering if anybody has any ideas on how to create a clapboard transition effect ....
Any help would be appreciated.
Thanks,
Blue

I haven't seen anything like that since the Toaster days<<</div>
Thank goodness! I'd almost forgotten the infamous Toaster Sheep transition until I saw your mention of this one ... now I'll have to start trying to clear my head again!

Photoshop CS6 Video - how to Apply Many Transitions Efficiently ?

Hello, i edit lots of software video tutorials inside Photoshop CS6 and overlay the videos with lots of red circles and keyboard keys. All these overlays need a short fade-in and fade-out. How can i apply these fade-ins and fade-outs more efficiently?
So far i only can do like this:
- If have to drag every single fade-in and every single fade-out to every single object, these are two actions per object. I believe there is no keyboard command for this and also i cannot create my own keyboard command here.
- Often i *copy* an object with Ctrl-J which already *has* the fade-in and fade-out. But the newly *copied object* does *not* sport the fade-in and fade-out; so i have to apply those manually again.
Is there any way to speed up the procedure of applying transitions? (Bulk-apply transitions? Keyboard ways?)
I already tried to activate the special time-frame keyboard commands. But i believe it doesn't help with the task i described (applying transitions). What's more, with special time-frame keyboard commands active, the arrow keys get new tasks then; but i need the arrow keys for *regular* keyboard commands in connection with the move tool (to precisely move the overlay objects to their desired position).
Any hints would be great!
More generally:
If you know any *advanced* tutorials on video in Photoshop CS6 (written or video), i would be interested. I am very familiar with general Photoshop including general video there. I don't need any introduction.
I have also tried to do my tasks in Premiere Pro CS6, but found it a bit overwhelming and went back to edit the video tuts in Photoshop. Even though after some getting-used-to-it, Premiere might be better for me. I *do* have to import lots of smart-objects and vector-objects with transparency from Photoshop all the time, and Photoshop is my natural habitat.
Thanks for all suggestions!

The long and short answer is that you are using the wrong tool, but since you already tried Premiere and were "overwhelmed", well, I guess that settles that. Seems to me you have locked yourself into a corner by habitually using PS for everything, no matter how awkward. It would really be easy to export all your graphics to separate files, import them in Premiere, build a prototype project and then save everything as presets. The same would be true for After Effects. In fact you could probably create a lot of stuff even natively in both programs using the titler tool or effects... Also what you describe is exactly what tools like Camtasia Studio also do automatically based on the mouse and keyboard data recorded during the session. I know it's not what you wanna hear, but it seems to me you are really using the wrong set of tools... As for solutions in PS - perhaps there's a way to get the edit points with scripting and then apply transitions automatically, but that's most likely as good as it gets...
Mylenium

[PE9] How do I apply a transition effect to a PIP?

Similar Messages

Maybe you are looking for