"Peak 5.2" won't run under Mavericks

I've just upgraded to Mavericks and discovered that my pro audio editor Peak LE 5.2 by Bias (company is out of business!) no longer works. On opening, it gives a dialog box saying "Another copy of this application is already running on this machine. Peak must now quit." There's nothing to do but click the "OK" button, and indeed it does quit.
I looked for other running apps that might be in conflict, tried rebooting, and I deleted my Java runtime in case that was it - No luck.
Any ideas?

Just found out from another post that if you disconnect from the internet, it will work.
I tried it, and that solved the problem!

Similar Messages

Hi. My iMac hard drive is running Mavericks. I have an old version of Quark Xpress (3.32) which won't run in Mavericks. Can I partition my hard drive and run an older system on one partition, so I can access my Quark? Is that possible?

Hi. My iMac hard drive is running Mavericks. I have an old version of Quark Xpress (3.32) which won't run in Mavericks. Can I partition my hard drive and run an older system on one partition, so I can access my Quark? Is that possible?

Hi ancelau,
QuarkXPress 3 is a Classic Mac OS application, so you need a version of OS X that still supports Classic. I believe 10.4 was the last one.
So if you have an iMac that boots with 10.4, then yes that is possible. I doubt though that newer Macs boot with OS X 10.4.
So why don't you upgrade QuarkXPress 3 to a newer version? I am not just asking that because I want you to spend money with us.
Typically using software that was released almost 20 years ago is just feasible when you keep an environment that was current at the time of release or a few years after, so an older Mac with a operating system present at that time. 20 years in IT is a lot.
So my opinion is that on a new Mac with a brand new operating system you need to use something a bit more current.
How about QuarkXPress 9 (released 3 years ago) or QuarkXPress 10? You are better off with v9, as QuarkXPress 10 only opens v7 and higher (whereas QuarkXPress 9 opens v3.1 and higher).
Or - I am even happy to make an exception - upgrade to 9 and we give you 10 for free? Let me know please.
Thanks
Matthias

Will iTunes 10.7 run under Mavericks?

Hi,
I just can't get used to iTunes 11, and I don't yet have any IOS 7 devices which would require that I do so.
I want to downgrade to iTunes 10.7, but will it run under Mavericks? I do want to upgrade to that.

OK I HAVE TRIED THIS. i updated to mavericks without even thinking about itunes 11, unfortunately it wiped my 10,7 but i got rid of 11 and did the pacifist way and got 10.7 again only to find it completely ****** my system, all of a sudden songs are stopping at random points, process ituneslibrary.blahblah keeps self quiting and popping up annoying warning messsages, also NOTHING could be updated or redownloaded off the app store while 10.7 was installed.
i attempted to fix permissions, this only made my itunes entirely inaccesible, now i have bitten the bullet and gone to 11, be smart and don't fall for it, if its too good to be true (ie free os) theres often some catch related to self interest brewing behind the scenes. theres such a headache involved with downgrading an os so really don't jump in, osx 11 is right around the corner, the new features are easy to overlook, my pc does run cooler but i lost the last version of itunes i enjoy operating and the piece of mind that it was my computer to do with it what a choose. like come on you got rid of front row and coverflow, weren't they the two big things innovated for osx in recent times that really made the mac feel less like a computer and more like a personal experience? oh thats right, money to be made. excuse me but when innovation was a regular thing for your company the focus was never on "what features can we steal from the next osx to make our customers buy more activity specific products?" before you are the sinking ship merely being pointed in the right direction realise what made you great and don't stop, not the weight or the thinness, it's the usability and the personification

How can I get Juice 2.2 to run under Mavericks?

Trying to install/use Juice 2.2 on a 2012 MacBook Pro w/16GB RAM and a Micron 980GB SSD. Juice runs perfectly on my 2010 Mac Mini running Snow Leopard, but on Mavericks it appears to install but won't run. Anyone out there have a solution?

That should be OSX Lion 10.7.5

Does Adobe Illustrator 10 run under Mavericks or Yosemite?

I've put off upgrading from OS 10.6.8 because I do a lot of work in Adobe Illustrator 10. I can't really justify the expense of upgrading to any of Adobe's Creative Suite packages because the Illustrator work I do doesn't bring in any revenue. Increasingly, other software I need will no longer run under 10.6. I'm kind of between a rock and a hard place on this. So, is anybody out there able to run Illustrator 10 under Mavericks or Yosemite, or even OS10.8? Thanks.

Upgrading an OS does not have to be an all-or-nothing proposition. You can simply have two operating systems installed, if you want to preserve Snow Leopard and Illustrator 10, and also use a later OS for other apps. You can add an external HD for the newer OS and apps for way, way less than the cost of Illustrator 5.5. You can also use your new drive/OS to safely explore the workability of running Snow Leopard Server in a VM (virtual machine) using Parallels or VMware Fusion on a 10.8 or later system. It would cost a very modest amount to try the combination of VMware Fusion and Snow Leopard Server. Server is available from Apple for $20 (but only by calling them). I don't remember what Fusion costs, but it works well and the license allows you to install it on more than one machine, which the Parallels' license doesn't.

After effects - doesn't run under Mavericks

Today I installed after effects under Mac Mavericks. But: When I try to start after effects, following message is on my screen:
"after effects cc is not running under this os X".
So I can't work with after effects!!!
Nice.
When will Adobe bring updates to solve this problem?
By the way, today there are updates from Adobe - for example Illustrator cc, but the same mistake comes:
when I close Illustator: the crash report runs...so nice also...
All users of the cloud of adobe paying monthly a lot and now we have to work with older systems...nice!!!

A week ago, we released After Effects CC (12.0.1) for Mac OS X v10.9 (Mavericks):
http://adobe.ly/AE_CC_1201_Mavericks
IMPORTANT: The After Effects CC (12.0.1) update fixes a crash on Mac OS X (v10.9). There is no need to install this update on any other operating system. After Effects CC (12.1) is coming soon for all operating systems and includes this same fix plus many more features and bug fixes.
Be sure that you are signed in and have activated the software—i.e., ensure that you are not running After Effects in free trial mode. The update will not work if you are running the application in trial mode.
This update is only available as a manual download (not through the Creative Cloud automatic update mechanism) to prevent users on versions of Mac OS X other than v10.9 (Mavericks) from installing it unnecessarily.
Adobe After Effects CS6 (11.0.3) was released a little while ago with this fix, plus fixes for many other crashes and bugs. Details: http://adobe.ly/AE_CS6_1103

Many of my applications won't run under Lion.

I used to run Tiger on a G4 Powerbook and a G4 Quicksilver. Now I have a new iMac running Lion but it does not support my PowerPC apps such as Toast or Popcorn. Also the drivers for many devices such as my printer, scanners and external LaCie HD aren't supported. Replacing everything is going to be expensive - any suggestions for workarounds? I'd also like to hear of any good DVD burning/copying applications that will run under Lion other than Roxio's.

You mentioned LaCie external hard drives - there is no driver needed for an external HD. Plug it in. If it is formatted correctly (which means it needs to be Mac OS extended (Journaled) and GUID Partition scheme (under Options) in order to be bootable on an Intel), there is nothing else you need. You may need to reformat to GUID if you're coming from a PPC. Note: back up your data first because the drive will be wiped,
I've used Toast and updated it - they usually have special update offers if you're coming from an earlier version. As for your printer and other hardware - if it is old but still works, you could keep using it with your old Mac (transfer whatever you want to print over to the old Mac and print from there) or start upgrading.

Some current apps won't run under IOS 4?

Just got this from RunKeeper
We wanted to reach out and warn you that the RunKeeper Free and RunKeeper Pro apps that you currently have on your phones are not iOS 4 compatible. New versions that are iOS 4 compatible are in the queue awaiting Apple's approval. We don't know if they will get approved before tomorrow (we hope they do), but if not, it should be any day now. In the meantime, if you wish to continue using RunKeeper while you are waiting, hold off on downloading iOS 4 until our next app version gets approved.
Is this going to be a general problem with older apps?

dlcrouch wrote:
Is this going to be a general problem with older apps?
I suspect there are three categories:
1. Apps which will not run under OS4
2. Apps which will run under OS4 but not support multitasking
3. Apps which will run under OS4 and support multitasking
I understand Navigon has a new version in the wings in Cat 3.
Hopefully the iTunes app store will identify those which will not work in OS4. But I suspect we may learn about some the hard way, starting tomorrow.
Phil

Server 3.2.2 won't run under Yosemite - how do I administrate my Mavericks servers?

Subject says it all.
I (stupidly) upgraded my primary development system to Yosemite, and now my Server app (3.2.2) won't launch so I can't remotely manage any of my Mavericks servers (which I simply don't have the time upgrade at this time).
Any suggestions?

You need OS X Server 4 on your Mac with Yosemite. With that you should be able to manage the other servers with that and WGM 10.8
I have not read about another way, and that is how we had to do it as well for the servers still on older versions of OS X.

HT3421 Battery Update 1.4 won't run under 10.6.8?

Getting the 'Service Battery' warning under the battery menu, noticed some have mentioned the need to run Battery Update 1.4 but when I try to I get an error that I need Leopard 10.5.6 or better. Guess SL 10.6.8 doesn't qualify as 'better'?
FWIW: CoconutBattery reports: "MacBook 4,1 43 months old w/ 263 loadcycles with max 22% capacity"

I also updated to SnowLeopard directly when it came out, and shortly afterwards lost my power adapter so didn't use my Mac for two weeks.
Today found the power adapter again (thank god, 'cause those things are expensive) and now my Macbook won't charge! I found the Battery Update 1.4 might help me but that one isn't working on systems running SnowLeopard...
What to do? I know since recently (There was a critical story in my local newspaper about failing Macbook batteries) that a lot of batteries of the late 2008 series plastic Macbook are failing on people and that you can only charge one about 300 times. That sounds so weird to me because that would mean I'll have to spend €139,- every year on a new battery!!! That would make my Macbook cost a grand total of more than €1500,- if i'd use it for about 4 years.. Now that *****! (excuse my language but I'm truly shocked!)

I downloaded Mavericks while I had an Age of Empires disk inserted; before installing, I saw a notice that Age of Empires won't run with Mavericks so I did not install, but now, using every trick I know the disk will not eject. Advice?t

Why won't Age of Empires disk not eject after downloading but not installin Mavericks?

here is pretty much every option:
Force eject a stuck cd/dvd
First try the normal methods to remove the disc. Drag its icon to the Trash can in the Dock or select 'Eject' from the File menu.
If you are running a virtual machine, e.g. VMFusion, ensure that the CD is disconnected from the virtual machine. This will sometimes allow the CD to now show up in Mac OS X.
Shut down the computer and start up whilst holding down the mouse button. This may take some time, but keep your finger on the mouse button right up until the disc comes out or the log-in screen has appeared.
If you have Toast Titanium installed on your computer, choose EJECT DISC from the menubar.
Sometimes you can successfully use the eject disc button in iTunes even if the disc is not visible to the Finder
Open Disc utility and choose the disc you wish to eject in the left-hand pane, then click on the Eject button.
Some Macintoshes have a paperclip hole that you can insert a straightened paperclip into, manually triggering the eject mechanism.
Open Terminal and type "drutil tray eject" to eject the disc/tray, and "drutil tray close" to close the tray.
If your computer has an eject button on the keyboard, restart the computer holding down the Option key. When the startup disk selection screen appears, let go of the option key and press the keyboard's eject button.
Source: http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD

ZEN touch won´t run under vista,also problem with firmware upda

i tried to connect my zen touch 20gb with my vista ultimate pc but it didnt work so i tried it by setting up a virtual machine (with xp on it running) and it recoknized it. then i tried to update the firmware and now i ended up with version 0.0. and can't put on another one....could someone explain to me how i can update the firmware (on xp or vista, nevermind) so i can use it again ?
tia,
chris?

I set up a fmware workstation virtual machine running winXP, after doing so it suddenly recognized the player also under vista (after selfinstall under the virtual xp-station!!!) , it was available as a virtual dri've and as a zen touch. i tried to update the firmware then under the xp sys but it had winMediaplayer on it which didn?t work with the zen touch as far as i know.On the VIsta machine? i tried to updade(get it to run) for hours, then tried to do everything new and started to remove every software and folders with creative parts in it, tried again etc but it wouldn?t work. the zen gave me a) the screen "syncroising" (for ever) or b)format, update firmware etc as options which didn?t work
?under _which_ system do i have to install _which_ firmware, software and what can the media player cause on problems please ?
i?m a music-junkie and i really NEEEEEEEEEED this machine !!!
thx in advance *bow*
chris?

Labview 7.1 won't run under Windows 7

Hello -
I recently upgraded my system to Windows 7 (Ultimate, x64). Unfortunately, when I now attempt to run Labview 7.1 on this machine I get an error saying the following:
The requested feature is unavailable on "localhost".
I am not sure of where to go from here. The built in compatibility mode (running it as if it were XP SP3, for example) produces the same result. Searching on this forum I found someone with the same message after installation errors (dealing with registry privileges) but I saw no such errors during what was an uneventful, clean install. One thing I am wondering about (although it does not seem to be an issue with any other program that I have) is I happened to notice that Windows 7 seemingly makes all subdirectories under "Program Files" (Program Files (x86) in this case) read-only. I turned this off for the National Instruments subdirectory and all of its subdirectories, with no change. I also attempted the "fix" for registry privileges (in the aforementioned post on here) with no luck.
Has anyone else seen this? It'd be nice if it gave me a more detailed message but this seems to be all of the information available with this error.
Thanks,
Brett

Hmm, you've just about stumped me. If this is on a laptop, please try disabling the WIFI card so only one network adapter is present (there are activation issues in later versions related to this). Are you using the default LabVIEW.INI file or are you migrating your settings from a previous install?
Also, do you have any drivers installed? If so, from what Driver CD are you installing them from (month/year)?
The system I tested LV 7.1 on is a virtual machine with Windows 7 Professional x64. I'm not sure I know many more "tricks" to try in order to get this to work, but I am not sure this is even an issue related to Windows 7. The other thread documents this issue on a Windows 2000 system. Once engaged by one of the NI Applications Engineers, you might try installing LabVIEW 7.1 from another copy of the distribution/installer.
-Bob
Message Edited by B O B on 11-10-2009 04:44 PM
Message Edited by B O B on 11-10-2009 04:45 PM
-Bob

Servlet won't run under JRun 4.0

Problem> when I attempt to run a successfully compiled servlet in IE, IE
could not locate the page. IE displays "Oops! We couldn't find your
document.", or a window with caption/title "HTTP 500 Internal server
error" and message "The page cannot be displayed. There is a problem
with the page you are trying to reach and it cannot be displayed."
The servlet is stored in C:\JRun4\servers\default\default-ear\default-
war\WEB-INF\classes\Servlet_Class1.class. The 'default' server was
running (via jrun -start default).
The following are the URLs I used in an attempt to run the servlet:
http://localhost:8100/Servlet_Class1
http://localhost:8100/servlet/Servlet_Class1
http://localhost:8100/default/servlet/Servlet_Class1
http://localhost:8100/classes/Servlet_Class1
http://localhost:8100/default/classes/Servlet_Class1
I entered the following servlet definition in
C:\JRun4\servers\default\default-ear\default-war\WEB-INF\web.xml:
     <servlet>
          <servlet-name>Servlet_Class1</servlet-name>
          <servlet-class>Servlet_Class1</servlet-class>
     </servlet>
I defined url pattern in web.xml:
     <servlet-mapping>
          <servlet-name>Servlet_Class1</servlet-name>
          <url-pattern>/</url-pattern>
     </servlet-mapping>
Here is a portion of the servlet I'm attempting to run:
     import javax.servlet.*;
     import javax.servlet.http.*;
     import java.io.*;
     /* The servlet extends the HttpServlet class and overrides the doPost
     method. The doPost method is called when a client makes a POST request
     (<FORM name=... METHOD=post ...>), and results in the simple HTML page
     being returned to the client. */
     class Servlet_Class1 extends HttpServlet {
     /* not sure if main() method is necessary for servlets? */
          public static void main(String[] args) {
               System.out.println("inside Servlet_Class1");
          }     // main() method
          public void doPost(HttpServletRequest request,
               HttpServletResponse response)
               throws ServletException, IOException
               ... the usual
I successfully ran/accessed the following:
     http://localhost:8100/index.jsp     <-- worked; JRun installation default
     http://localhost:8100/zhome2.jsp <-- worked; a simple JSP page I wrote
http://localhost:8100/ returns the standard IE page with the
caption/title "HTTP 500 Internal server error" and message
"The page cannot be displayed. There is a problem with the page you are
trying to reach and it cannot be displayed." index.jsp does exist under
C:\JRun4\servers\default\default-ear\default-war.
I successfully ran some servlets from the 'techniques' sample directly
by entering their URLs:
http://localhost:8200/techniques/servlet/ContextInfo     <-- worked
     http://localhost:8200/techniques/servlet/InitInfo     <-- worked
I installed JRun as an "application", NOT as a "service".
My PC configuration:
     java version "1.4.0_01"
     Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.0_01-b03)
     Java HotSpot(TM) Client VM (build 1.4.0_01-b03, mixed mode)
     JRun 4 (Build 47304)
     WinNT 4.0 SP5
     IE 5.50
     CLASSPATH=.;D:\jakarta-tomcat-3.3.1\lib\common\servlet.jar;C:\JRun4\servers\defa
     ult\default-ear\default-war\WEB-INF\classes
     JAVA_HOME=C:\j2sdk1.4.0_01
     Path=C:\j2sdk1.4.0_01\bin;C:\WINNT\system32;C:\WINNT;C:\Program Files\Network As
     sociates\PGPNT;C:\Program Files\MTS;d:\MSSQL7\BINN
I previously installed Tomcat but gave up on it. But I am using it's
servlet.jar to cleanly compile servlets.

still no success. I also tried entering a dot-qualified servlet name
     http://localhost:8100/servlet/zservlets.Servlet_Class1
     http://localhost:8100/zservlets.Servlet_Class1
My default-event.log contained:
08/22 18:33:19 info No JDBC data sources have been configured for this
server (see jrun-resources.xml)
08/22 18:52:03 user ServletInvoker: init
08/22 19:49:16 info Servlet_Class1
08/22 19:49:16 info Servlet_Class1
08/22 19:49:17 info Servlet_Class1
08/22 19:49:17 error Requested resource null not found
08/22 19:49:33 info zservlets
08/22 19:49:33 info zservlets
08/22 19:49:33 error Requested resource null not found
08/22 19:49:35 info zservlets
08/22 19:49:35 error Requested resource null not found
08/22 19:51:46 info Deployer Service is undeploying watched URL
file:/C:/JRun4/servers/default/default-ear/
08/22 19:51:47 user ServletInvoker: destroy
08/22 19:51:47 info 3 session(s) persisted
08/22 19:51:47 info Removing web application service from servlet engine
service: default-ear#default-war
08/22 19:51:47 info Unregistering enterprise application:
file__C__JRun4_servers_default_default-ear_#default-ear
08/22 21:41:16 error Servlet_Class1
[1]java.lang.IllegalAccessException: Class
jrun.servlet.WebApplicationService can not access a member of class
zservlets.Servlet_Class1 with modifiers ""
     at sun.reflect.Reflection.ensureMemberAccess(Reflection.java:57)
     at java.lang.Class.newInstance0(Class.java:290)
08/22 21:41:25 user FileServlet: init
08/22 21:41:25 error Requested resource /Servlet_Class1 not found
08/22 21:41:27 error Requested resource /Servlet_Class1 not found

DAQ program compiled under Win2k won't run under Win 95.

When I compile a LabView 5.1.1 vi program that uses lvdaq.dll on my Windows 2000 workstation, that same program will not run on a Windows 95 notebook computer. Error code 21 (external subroutine could not be found) is reported for all standard DAQ vi's calling functions within lvdaq.dll even though the dll can be found in the program directory, the system directory, the vi.lib\daq directory, and via the system path. The same program compiled on a Windows 95 workstation runs on the Windows 95 notebook computer just fine. Why is lvdaq.dll not found when the program is compiled under Windows 2000? Do I need the same version of NI-DAQ on both computers?

Larry;
If you are doing NI-DAQ function calls on your VI you need to match the NI-DAQ version on both machines, otherwise, depending on what functions you are calling and what are the NI-DAQ versions, you might get some errors. Just for future reference, this procedure is good for NI-VISA (if you are using VISA VIs) and NI-488.2 (if you are using GPIB boards) as well.
Regards
Filipe Altoe
Application Engineer
National Instruments

"Peak 5.2" won't run under Mavericks

Similar Messages

Maybe you are looking for