Peak point at Curved Line Graph

I am using Oracle Graphics to make graph and then call it in oracle report. that all is doing well.
I am using 'Curved Line with Symbols' graph from Oracle Graphics, and i want to draw a line at the maximum peak point of the curve line at run time .
Reference Line is one option available in Oracle Graphics but it only can use horizontlly and I want vertically also and also we cannot set its value at run time.
I hope you got my problem.
A.B.

Tim,
Are you looking for something like this?
This is a Scatter Chart with two series - one for the data and one for the limit.
Jerry

Similar Messages

Data Point Symbol in Line Graph - can you change the size?

I would like to change the Data Point Symbols in line graphs - if not the actual symbol it would be wonderful to be able to change the size of the symbols provided.
At present, if there is a lot of data in the graph, the symbols are too big and crowd one another.
I know that one can reduce the line size but that doesn't change the symbol size.
Help please.

If I understand your question, this from the Pages online help may give the answer:
To mark line, area, and scatter charts with data point symbols:
Select the entire chart. You can also select the chart series (the line or area shape) that you want to mark with data point symbols.
Click Inspector in the toolbar, and then click the Chart Inspector button.
Click Series (except for scatter charts).
Choose a symbol from the Data Point Symbol pop-up menu.
Choose one of the following options from the Symbol Fill pop-up menu:
To fill the symbol with the same color as its outline, choose Use Stroke Color.
To fill the symbol with a solid color, choose Color Fill, click the Fill color well, and pick a color.
To fill the symbol with a gradient, choose Gradient Fill and use the gradient controls to set the colors and change the angle of the gradient.
To fill the symbol with an image, choose Image Fill and select the image you want. You can also resize the image by choosing an option from the pop-up menu above the Choose button.
To fill the symbol with a tinted image, choose Tinted Image Fill and select the image you want. Click the color well to the right of the Choose button to change the tint color. You can also resize the image by choosing an option from the pop-up menu above the Choose button.

Represent NULL point in Line Graph.

Hi;
      I am using Simple series to supply data to Graph type Line. I have a requirement to represent null data point in Line graph, where marker point for the NULL data point shouldn't be present, instead a straight line should come in between the valid points. Currently if the Data value is null, marker point is coming to 0.
How can i solve this problem using Simple Series?
I am using NW7.0; SP 9
vinod.

Please refer:
http://www.sapdesignguild.org/resources/diagram_guidelines/index.html
Reference Point:
     Chart Type Line Graph
         Do not Use it if the X axis has non-numeric values..
vinod.

Different shapes for symbols in line graph

I can't figure out how to change the default square data points in a line graph. When I try to got to Object>Graph>Marker it is greyed out. When I click on a circle symbol and then try to go to Object>Graph>Design, it is greyed out. I am so frustrated trying to do the simplest things in this program. The online tutorials on how to make graphs do not seem to explain the simplest of tasks, only the difficult. Thanks for any help!

Do can do, see API..... You will need to create your own custom control by displaying a graphic with the rounded image. Search forum for displaying an image.

Multiple symbols for line graph in illustrator

I can't figure out how to change the default square data points in a line graph. When I try to got to Object>Graph>Marker it is greyed out. When I click on a circle symbol and then try to go to Object>Graph>Design, it is greyed out. I am so frustrated trying to do the simplest things in this program. The online tutorials on how to make graphs do not seem to explain the simplest of tasks, only the difficult. Thanks for any help!

Skeptic,
Yes, it's cumbesome, but it's described in Online Help (at least in CS3 and prior):
Draw whatever you want to use for the marker. (It can be a Symbol; doesn't matter.)
Draw a rectangle and send it behind the marker artwork. For a marker on a line chart, the size of the rectangle relative to the marker art defines the scale.So the rectangle can be smaller than the artwork to make the artwork larger, as shown above. The rectangle can be unstroked, unfilled so it doesn't show.
Select both the artwork and the rectangle. Group. Leave it selected.
Object>Graph>Design. In the dialog, click New Design. Click OK.
Black pointer: Select the graph. Object>Graph>Marker. In the dialog, select the Design you just created. Or...
White pointer: AltClick a single marker in the Graph. AltClick it again to "select up" (Illustrator's upside-down selection scheme) to the parent group. AltClick again to include the legend marker. Object>Graph>Marker. In the dialog, select the Design. This way, you can assign different markers to the various lines in the line graph if you want.
JET

ADF Line Graph

Hello,
I have a graph which i bind to backing bean private List<Object[]> graphTabularData. I am able to get the points from the adf line graph on clickListener only for the data that exist in the private List<Object[]> graphTabularData.
Is it possible to get the x-axis and y-axis values on the line graph where a data point doesn't exist in the private List<Object[]> graphTabularData; so then I can use those points to insert it in the
private List<Object[]> graphTabularData; to create a new point ?
Thanks a lot.
Regards,
Valon

Hi Frank,
I agree with that statement. However, I am not trying to edit data.
I just need to know if it's possible to create a new point in the line graph by clicking on the line where no data points (mapping) exist ?
Thanks.
Edited by: Valon on Oct 31, 2012 5:57 AM

3D Line Graph.vi not displaying line connecting data points.

I'm having trouble getting 3D Line Graph.vi to display the line connecting my data points. I'm collecting latitude, longitude, and depth data from a binary file, loading this data into arrays with a while loop, and sending those arrays to 3D Line Graph.vi. When I tried doing it with arrays created by random number generators, the line is displayed, but when I use it with my actual data, no lines are displayed. I can only see where the data points are when rotating the 3D graph. Any ideas on this would be appreciated.
Thanks,
Morgan
Attachments:
Plot Depth.PNG ‏61 KB

Karunya,
Thanks for the info on the 3-D Curve VI. I tried it and it works. I think I was able to find the problem with 3D Line Graph.vi. It has something to do with plotting very close points away from the origin and scaling the axes to view the line. I have attached an example of where the vi breaks down. In this example, you can see that part of the line is drawn, but when you rotate the graph, you can see that the line is not drawn through all of the points. If you change the scale of the axes, then you eventually get the line to go through all of the points, but then the graph is not very "readable" at that point. It's when you try to zoom in really close to the plotted points.
Thanks!
Morgan
Attachments:
3d Line Graph Error.vi ‏16 KB

Transparency fill in line graph data points does not copy over to Pages

I have created some line graphs in Numbers, and they look beautiful. Since some of my data overlap and I want users to be able to easily see where all data is on the graph, I have made the data points transparent on the foremost line. This allows the other line (which data points are filled in with another color) visible "through" the foremost line.
However, when I attempt to copy the graphs into Pages, the data points of the foremost line are no longer transparent - they are filled with white. Obviously, this defeats the entire purpose of using a transparency fill!
What can I do to make this work?
Thank you,
G. Pasarescu

Hi Yvan,
Thank you for the tip. Unfortunately, I need to embed several of these charts into the Pages document, and cannot use Numbers instead of Pages for the document.
Interestingly, if I copy the chart from Numbers and paste it into some graphics programs (like Pixen and Pixelator), the transparency is preserved. However, pasting the same copy into other graphics programs (such as Seashore or Photoshop) somehow flattens the image, removing the transparency, and I'm back to square one.
Using a graphics program as the bridge between Numbers and Pages reduces the quality of the chart - that's why I'd like to try to make this work in Numbers / Pages.
Thanks,
Geoff

Sloping the line graph curves

The line graph has curves.
I was requested to had some sloping mode, which will present the curve in more 'circle' way.
Is there any way to do so?

The graph is rendered by a third party charting engine called Corda charts. It is not possible to customize the rendering of the graphs if thats what you are looking for.

Line Graph repeats the starting data point at the end also

Hi,
We have a Line Graph as below. This graph is used to show the Salary changes of a person, over time.
But this graph shows an additional non existing data point. Basically it shows the starting data point once again at the end of the other data points.
The model VO for this graph, does not contain this additional data point record. But the graph repeats the starting data point at the end also.
In the screen-shot you can see that, the graph has three data points. But the table has only two. The first data point in the graph is repeated as the last data point.
Is this a Bug..?
Or an issue with the usage of the DVT tags?
The code is given below.
Please advice.
12 <dvt:graph id="lineGraph1" value="#{bindings.SalaryHistory.graphModel}"
13 graphType="LINE_VERT_ABS"
14 shortDesc="#{HcmEmploymentTopGenBundle}"
15 markerDisplayed="true"
16 continuousTimeAxisInterval="CTAI_DAY"
17 contentDelivery="immediate" animationOnDisplay="AUTO"
18 imageFormat="FLASH" stylePath="April"
19 timeSelectorListener="#{backingBeanScope.AssignmentChangesAndSalaryBean.changeTime}"
20 timeAxisType="TAT_MIXED_FREQUENCY" dynamicResize="DYNAMIC_SIZE"
21 inlineStyle="height:40em;"
22 binding="#{backingBeanScope.AssignmentChangesAndSalaryBean.asgSalaryGraph}">
23 <dvt:background>
24 <dvt:specialEffects/>
25 </dvt:background>
26 <dvt:graphPlotArea/>
27 <dvt:seriesSet>
28 <dvt:series/>
29 </dvt:seriesSet>
30
31 <dvt:o1Axis scrolling="asNeeded"/>
32 <dvt:y1Axis/>
33 
34 
42 <dvt:o1MajorTick/>
43 <dvt:o1TickLabel/>
44 <dvt:o1Title id="o1Title1">
45 <dvt:graphFont id="graphFont1"/>
46 </dvt:o1Title>
47
48 <dvt:attributeFormat id="af1" name="DateFrom">
49 <af:convertDateTime pattern="#{applCorePrefs.dateFormatPattern}" />
50 </dvt:attributeFormat>
51
52 <dvt:markerText>
53 <dvt:y1Format>
54 <af:convertNumber pattern="#{applCorePrefs.numberFormatPattern}"/>
55 </dvt:y1Format>
56 </dvt:markerText>
57
58
59 </dvt:graph>

If I understand your question, this from the Pages online help may give the answer:
To mark line, area, and scatter charts with data point symbols:
Select the entire chart. You can also select the chart series (the line or area shape) that you want to mark with data point symbols.
Click Inspector in the toolbar, and then click the Chart Inspector button.
Click Series (except for scatter charts).
Choose a symbol from the Data Point Symbol pop-up menu.
Choose one of the following options from the Symbol Fill pop-up menu:
To fill the symbol with the same color as its outline, choose Use Stroke Color.
To fill the symbol with a solid color, choose Color Fill, click the Fill color well, and pick a color.
To fill the symbol with a gradient, choose Gradient Fill and use the gradient controls to set the colors and change the angle of the gradient.
To fill the symbol with an image, choose Image Fill and select the image you want. You can also resize the image by choosing an option from the pop-up menu above the Choose button.
To fill the symbol with a tinted image, choose Tinted Image Fill and select the image you want. Click the color well to the right of the Choose button to change the tint color. You can also resize the image by choosing an option from the pop-up menu above the Choose button.

Is it possible for a line chart to display curved lines between points?

We have an interesting request to build a line chart in OBIEE, where the chart points are connected by curved lines instead of the normal straight lines. The best way to describe it would be "snakelike." I've seen this in a Cognos report, but I'm not sure if OBIEE can do this. Maybe a setting within line.pcxml? Any ideas?

We currently do not provide such a chart. The two options you have for connecting the points in a line chart are either via a straight line or via a step curve. A curved line would basically be a form of a spline curve, with appropriate curve-fitting algorithms.
Rgds,
Abhinav
BI Product Management

Multiple Line Graph

First off, thanks to kglad for the line graph function I
started with, it has been a huge help. Now the step I'm trying to
take is 2 fold.
First, I'd like to graph more than one line segment on the
graph. Right now I am graphing functions f1 and f2, but f2
currently overwrites f1. I want them to coincide so f1 goes from
x=1 to x=15, f2 goes from x=15 to x=25, f3 goes from x=25 to x=10
at a different y (these are all curves), and finally f4 goes from
x=10 to x=1 creating a closed shape. Also, I want the x values and
the y values to be variable based on the temperature. I'm using
PV=nRT and n, R, and T are all known. so I have something like
P=nRT/V where P is y, V is X and the nRT can be calculated for two
steps of the 4. The other two steps are adiabatic, so Q=0, I don't
know yet how to fit the lines but i do know that y = a / (x^(5/3))
is a formula that works, I just need to find the proper a values
for steps 2 and 4.
Part two of this issue is that currently the graph is drawing
as the whole canvas, which is fine for testing until i get the
multiple line part worked out; however I only want this to be 1/4
of the viewing area as I have other movie clips and such to put on
this. A conceptual drawing of what I plan on making can be found
at:
http://www.students.bucknell.edu/gbement/Steps.html
I'm a novice to Actionscript and movie clips, I previously
did everything with motion tweens and nothing was dynamic. I plan
on creating the piston and molecule simulation in another movie
clip, then I can vary the play speed relative to the hot and cold
temperatures by looping the movieclip and having it play faster for
a high T and slower for a low T.
Any help on any of my many issues would be greatly
appreciated and the user will be recognized for their assistance in
my research presentation :)

Hi Arun, thanks again for the help but upon closer inspection
(along with only a basic knowledge of java and actionscript), I
think your script would need editing to work for me (editing i'm
unsure of how to do). What I'm looking for is a graph that will
create a line based on a function. Much like y=(a*b*c)/x or
y=(a*b*c)/(x^1.66) The a*b*c would be complicated also, but here's
what i've thought up on paper that I have to move to script, I hope
this is useful:
Step 1: Calculate the a*b*c
The original function is PV=nRT , nRT being the a*b*c ,
however the Thot and Tcold terms are input boxes that the user
types in before hitting the "go" button.
So I have to do this much:
tcold = Number(tcold_num.text);
thot = Number(thot_num.text);
var n:Number = 1;
var R:Number = 0.0825;
var a:Number;
var b:Number;
var c:Number;
var d:Number;
a = n*R*thot // Step 1 constant
b = // Step 2 constant (formula to be finished :-/) Looks to
be a formula using ((b) / (Math.pow(x, 1.666)))
c = n*R*tcold // Step 3 constant
d = // Step 4 constant (formula to be finished :-/)
Then I need to find a way to initialize axis to line the
graph, I can label the P and V axis using static text boxes later I
suppose.
The problem I have with yours that I don't understand is that
I could add the function into the y part of the addLine() function,
however it's noted as inity= y1 (requires a number), and the
function definition has y1:Number.
Now the issue i'm tackling below is just a newbie's lack of
understanding (i hope), but the script kglad wrote (snipped below)
will graph one line, and i can't figure out for the life of me how
to write this up to graph more than one instance without
overwritting the previous line. Again, Thanks for the help so far,
it has helped me find the points where I lacked direction and solid
ideas before.

Connecting only wanted points in analysing xy graph

hello NI thanks in advance for the team support
firstly i am getting a force velocity characteristic on an xy plot and from this graph iam geeting peaks plots on another graph. Now problem is i want to store only these peaks points in an file another file. and to import these peak data from stored file And main thing to do is during the analysis of this imported data i want to draw line between these points. ( not all points but only those which iam interested in)
hope my explation is clear.
Attachments:
graph.png ‏18 KB

Attachments:
ni useDAMPER TEST RIG.vi ‏1854 KB

How can I connect dots across missing data points in a line chart?

Hi all!
I have a table in Numbers that I update every few days with a new value for the current date (in this case body metrics like weight, etc.), which looks something like this:
Column 1              Column 2      Column 3
Aug 16, 2011         87.1             15.4
Aug 17, 2011         86.6
Aug 18, 2011         86.1
Aug 19, 2011
Aug 20, 2011         85.7             14.6
Aug 21, 2011         85.3
Every once in a while there will be a missing value for a given date (because I didn't take a reading on that day). When I plot each column against the date on a line chart, there is a gap where there are missing data points. The line does not connect "across" missing data points. Is there a way to make the line connect across missing data points?
Thanks for any help. This thing has been driving me nuts!

Leave your nuts in peace.
Don't use line charts but scatter charts.
These ones are able to do the trick.
Of course to do that you must study a bit of Numbers User Guide.
In column D of the Main table, the formula is :
=IF(ISBLANK($B),99999,ROW())
In column E of the Main table, the formula is :
=IF(ISBLANK($C),99999,ROW())
Now I describe the table charter.
In column A, the formula is :
=IFERROR(DAY(OFFSET(Main :: $A$1,SMALL(Main :: $D,ROW())-1,0)),"")
In column B,the formula is :
=IFERROR(OFFSET(Main :: $A$1,SMALL(Main :: $D,ROW())-1,1),"")
In column C, the formula is :
=IFERROR(DAY(OFFSET(Main :: $A$1,SMALL(Main :: $E,ROW())-1,0)),"")
In column D, the formula is :
=IFERROR(OFFSET(Main :: $A$1,SMALL(Main :: $E,ROW())-1,2),"")
In this table, select the range A1 … D5
and ask for a Scatter chart.
You will get what you need.
I asked that points are joined by curves
I just edited the parameters of Xaxis and Yaxis to get a cleaner look.
I repeat one more time that knowing what is written in the User Guides is useful to be able to solve problems with no obvious answer.
Yvan KOENIG (VALLAURIS, France) samedi 27 août 2011 15:59:20
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Multiple arrows on a single curved line

Is there a way to put multiple arrows on a single curved line?

kjh,
Depending on the curvature, you may get away with a Scatter Brush in the form of the arrowhead shape:
1) Create the path with its normal Stroke Weight, and create a copy on top of it;
2) Create the arrowhead shape and Brush>New Brush with a suitable Spacing;
3) Apply the Scatter Brush from 2) to the copy path from 1).
Or you may try a Blend, between two identical arrowheads:
1) Create the path with its normal Stroke Weight, and create a copy on top of it;
2) You probably need to Object>Path>Add Anchor Points a sufficient number of times (to get an even distribution);
3) Create the Blend, with the desired number of steps/intermediate arrowheads;
4) Select the Blend and the copy path and Object>Blend>Replace Spine.
Ultimately, you may need to do it manually.

Peak point at Curved Line Graph

Similar Messages

Maybe you are looking for