PEAP works with Windows zero but not with CSSC

I got PEAP to work using the windows zero config but I cannot get PEAP to work when usin CSSC on the same laptop.
When using CSSC I get asked for the password and authentication fails. ACS is reporting PEAP authentication failed due to unknown CA certificate during SSL handshake.
Any suggestions?
Seth

Look at this ....
Server Validation
–The Personal stores are not used for server validation.
–When the configuration specifies validateChainWithAnyCaFromOs, the certificate must be installed in the Local Computer\Trusted Root store.
–Any Root CA certificate included in the configuration is ignored and the configuration is translated to validateChainWithAnyCaFromOs. The Root CA certification must be installed by some other means.
–The certificate store is limited to Local Computer during machine authentication and user authentications when the connection is attempted before Windows logon.
http://www.cisco.com/en/US/docs/wireless/wlan_adapter/secure_client/5.1.1/administration/guide/C2_SetupSSC.html

Similar Messages

Attempting to use certreq -enroll to enroll to a client authentication certificate works with Windows 8, but not with Windows 7...

This has been an issue for a while now. Trying to use certreq -enroll -machine [Template Name] on Windows 7 machines fails with not implemented. When I run this command with the -q flag I see that the certificate I want is unavailable and displays:
A valid certification authority (CA) configured to issue certificates based on this template cannot be located, or the CA does not support this operation, or the CA is not trusted.
When I go into the properties of this certificate and goto the Certification Authority tab and check the "Show all enrollment servers" it shows my server greyed out with this message:
The system could not determine if you can access this certificate. Not implemented.
The template sits on a enterprise 2003 server CA and this process works with Windows 8.1 machines. Which means that the template has the correct permissions and is issued correctly.
Is this a known issue with Windows 7 or am I missing something in the config? Help is greatly appreciated.
Thanks,

Hi
I have done some tests on a Windows 7 Enterprise machine and a Windows 8.1 Enterprise machine, it turns out that I have the same issue with you.
On the Windows 7 machines, I cannot use Certreq.exe to request machine certificates, but I can successfully request user certificates, and there is no issue with the Windows 8.1 machine.
Best Regards,
Amy
Interesting. From what I can tell, there are no patches that fix this issue either...

Using SharePoint Open with File Exployer - works with Windows 7 but not with 8.1

I am using a SharePoint site. There is an option to open the site in File Explorer [Open in Explorer] that I can use with Windows 7 computers with no problems. However, when I try to use in Windows 8.1, I receive an error message telling me to add
the SharePoint site to my trusted sites even though the site is already a trusted site. I can use this SharePoint command on multiple Windows 7 computers with no problems. I set the Windows 7 computer next to the Windows 8.1 and used the same
I/E 11 with the same security settings. Works for 7 and not for 8.1.

Hi，
For your issue, try to do the following:
Click Start > Run->Enter "services.msc" ->Find the WebClient service and select Restart.
In Internet Explorer go to Tools > Internet Options > Security->Local intranet->make sure the AcitveX control is enabled.
Enable Basic authentication on the client computer, by setting the BasicAuthLevel registry entry of the following key:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters
For detailed steps, refer to the KB:http://support.microsoft.com/en-us/kb/841215
Also, here are some troubleshooting articles, you can use as a reference:
http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
https://support.office.com/en-au/article/Fix-problems-opening-documents-in-SharePoint-libraries-31329fa1-4ad0-47fc-95d8-bb0c5b12a536
Besides, here is a similar post, you can use as a reference:
https://social.technet.microsoft.com/Forums/office/en-US/9f03bdb1-d087-4c8e-8cde-8a2e1471e0cf/file-explorer-not-opening?forum=sharepointadmin
Best Regards，
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Macbook pro boots with windows 7 but not with osx lion.

I have bought macbook pro 1year ago. it has dual boot, its booting with windows 7 perfectly fine but its not booting up OSX lion shows grey screen and wheel just keep moving.

I have bought macbook pro 1year ago. it has dual boot, its booting with windows 7 perfectly fine but its not booting up OSX lion shows grey screen and wheel just keep moving.

I can see my wi-fi with windows computer, but NOT with any of my apple devices

I cannot see my wi-fi with any Apple device, but AM able to use my non-Apple comupter

That is a reversal of note.. normally people are struggling to get their windoze boxes to work.
Reset the Airport to factory and start over.
Use all short names, no spaces and pure alphanumeric.
Leave off the wireless security until you confirm it works... then add wpa2 personal security with a 10-20 character pure alphanumeric password.
You can also try fixing wireless channels.. test 11, 6, 1 for 2.4ghz in that order.

My firewire port works with ext hd but not with audio interface

2010 Imac 21.5 running 10.8.5. My firewire port works with ext hd but not with audio interface. The local authorized Apple tech said that I need a new motherboard, but my firewire ext drive works perfectly. I don't understand. Thanks.

You must go to the website of the audio interface manufacturer and look for, download and install updated drivers for the audio device you are using.
This is not, neccessarily, an Apple issue.

My iPhone does not synced with windows 7 but synced with windows Xp

My iPhone does not synced with windows 7 but synced with windows Xp

Just today evening I have replaced a brand new iPhone 5 with Apple store, so I came at home & try to restore my iPhone but it is not synced (mean my iPhone does not shown in iTunes,) & at the same time I m restart my PC with windows Xp , now my iPhone connected with iTunes. So what is the problem of my windows 7 ,

Using iCloud my iCloud calendar is syncing with my iPhone but not with the Outlook calendar on my PC (Windows 7)

Using iCloud, my iCloud calenda is syncing with my iPhone but not with the Outlook calendar on my PC (Windows 7)

smurfanda wrote:
I agree. What I see is that it is creating an icloud calendar in Outlook but I want it to sync to Outook itself.
That is what it does. There is no sync, you have a new calendar.

Have Sony reader 505, ADE doesn't recognize when attached to mac OX 10.6.8. works with reader library but not with ADE

Have Sony reader 505, ADE doesn't recognize when attached to mac OX 10.6.8. works with reader library but not with ADE

YEAY!
I just got the solution (that worked for me, anyway) from a Sony support rep. No PC or VMWare needed.
OK, you've installed Sony eBook Library v3, and Adobe Digital editions, you've set up your acocunts and authorized your computer on both of them, and you've authorized your Reader with the Sony Library application.
You go to the public library ebook download page, either through the Sony Library or just through a bookmark.
You check out a book, and open it in Adobe Digital Editions, which still won't recognize your Reader.
BUT, in the Sony Library app, you can now click "File, Import.." and go find the pdf you downloaded with the Adobe app.
On my Mac, it was in ~/Documents/Digital Editions
Import it, and drag it to your Reader.
The first time you do this, it will ask you to authorize the Reader with your Adobe ID.
Worked like a charm.

ITunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible

I have my iTunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible

You can't connect directly to the external drive, but should be able to use iTunes Home Sharing via the laptop.
http://support.apple.com/kb/PH1453

My Printer (samsung clx-3185fw) says it connects to my network but I can't seem to print wirelessly. I could with my netgear but not with my airport extreme, any ideas?

My Printer (samsung clx-3185fw) says it connects to my network but I can't seem to print wirelessly. I could with my netgear but not with my airport extreme, any ideas?
I have restarted all units, disconnected and reconnected

Hi ryanfromstockbridge,
I apologize, I'm a bit unclear on exactly what you are seeing when you try to add the printer or print to the printer. If you continue to have issues printing to this wireless printer, you may find the information and troubleshooting steps outlined in the following articles helpful:
OS X Yosemite: Printing troubleshooting
Troubleshooting printer issues in OS X - Apple Support
OS X Yosemite: Add or remove a printer
Sincerely,
- Brenden

Windows 8.1 64bit. Webcam works with "Camera" app but not with Skype.

I've spent a few hours googling and trying out various things - all listed below. I give up - any ideas??? OS: Windows 8.1 64bitMemory: 32GBWebCam: Microsoft VX-7000. As per subject - the webcam works with the "Camera" app but not with Skype for desktop or for Modern UI (or the Microsoft Lifecam software for that matter). Already attempted: 1) Uninstall webcam drivers - download latest from microsoft (Windows 7) and install in Windows 7 compatibility mode.2) Close (from taskmgr) anything that looks like it might use Webcam. 3) Run Skype for Desktop in Windows 7 and 8 compatibility modes None of the above work. In Skype for Modern UI the webcam doesn't appear in the drop down in Settings - so I can't even select it. In Skype for desktops (version 6.11.32.102) the webcam is found but instead of image I get "Can't start video. Try closing other programs that might be using your webcam". I see from a bit of googling that various people seem to have the same issue (i.e. Webcam works with Camera app but not Skype) - so I'm hopeful someone has found a workaround / fix to this issue and I've just not had the googling skills to find it Thanks, - Matt Symes

OK - I appear to have resolved the issue. I restricted my google terms to [vx-7000 site:microsoft.com "windows 8.1"] Which uncovered this article: http://support.microsoft.com/kb/933311 I noticed there were a couple of Windows 7 x64 specific registry settings that were mentioned so I checked these and they weren't as per the article. In fact - one of the Registry Keys was already used by other software "AI Charger+" which is some ValueAdd software that came with my motherboard. I uninstalled AI Charger+, uninstalled LifeCam driver. Reinstalled LifeCam driver in Windows 7 compatibility mode. Still not working. I returned to the registry and noticed the settings still differed from the above article. I corrected them (which involved not just amending Data but having to add new Values). I then disabled and reenabled the LifeCam from dvcmgmt.msc I was then able to get video from the webcam in the Skype for Desktop preview screen.

ESR,ID working with 8000 port but not with 50000

Hi experts,
I am working with PI 7.1. I am working with SOAP to ABAP SERVER Proxy scenario. I have downloaded the WSDL from ID and using XMLSPY sent a SOAP request to PI server and I got an error in SXMB_MONI under the Call Adapter step saying CLIENT_RECEIVE_FAILED.
We cross checked the services in SMICM transaction, and we missed the HTTP port 8000 for the parameter icm/servr/port_xx.
Then basis team changed the port 8000 in SMICM for the same parameter and restarted the Java stack.we checked the icm/HTTP/j2ee parameter which is having 50000 port.
Now ESR,ID,SLD,RWB... etc are working with ABAP port 8000 but not with 50000 java port and also I am getting an error in SXI_ CACHE while doing my delta refresh if_http_client receive http_communication_failure : http_communication_failure:ICM_HTTP_CONNECTION_FAILED. Kindly suggest me to resolve this error.
Naveen

Hi,
Re: Architecture of PI 7.1
NW PI 7.1 - ICM is not binding to port 5$$00
from the above two threads it is very clear that from PI 7.1 both the ABAP and J2EE ports are same.
Now we maintained both the ICM and j2ee port as 50000. Now ESR,ID,SLD are working with port 50000.
But in my SOAP to Proxy scenario I am getting the same error. When I try to send request to XI server using Altova xmlspy I am getting following error in SXMB_MONI under Call Adapter
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
When i click that HTML error It shows
404 Resource not found
I am getting the following error in CC monitoring .
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIServer:CLIENT_RECEIVE_FAILED
My reciever communication channel is in green status CC monitoring.
I tested my server proxy in my end system which is successfully fetching data.
I am using the following URL format for generating the WSDL from Integration directory.
http://host:port /XISOAPAdapter/MessageServlet?channel=p:s:c
Do we need to maintain the Fully qualified host name in the above URL?
I tried with a test scenario which is an asynchronous communication with the above mentioned URL format. I got a success message in SXMB_MONI.
Since I am using PI 7.1 I tried the following URL also but i this case,the XML spy itself throws error. I couldnt see any messages in SXMB_MONI.
http://host:port/XISOAPAdapter/MessageServlet?senderParty=&sender
Service=FS&interface=IF&receiverParty=&receiverService=TS&interfa
ceNamespace=IFNamespace
I have seen many threads in SDN for this same error but I didn't get an answer for my scenario.
Lakshman and Manjusha
Thanks for the quick responses.
Regards
Naveen
Edited by: naveen perumal on Jul 24, 2009 8:00 PM

Wireless video link example works with antenna only but not with SMA to SMA cable

I am trying to run wireless video link example https://decibel.ni.com/content/docs/DOC-22728 . It works fine if I use install antennas on my Tx and Rx USRPs. But it does not work if I use SMA to SMA cable to connect Tx and Rx USRPs. Can somebody guide me what is the reason why it is only workng with antennas but not with SMA to SMA cable.
Thanks
JK

I connect the 30 dB attenuator at RF input port of Rx USRP. But it does not work completely.
Without connecting attenuator i was not able to receive any thing on my Rx VI although it shows waveform. But after connecting attenuator receiver some times receive text messages and some times not. Also it does not work at all for images and for video it works partially but gives some error related to memory full after few mins.
I want to know why this example works completely without any problem if I use antennas, and why it does not work perfectly if i use sma to sma cable for connecting transmit and receive usrps.
Please guide
Thanks
JK

Wifi works on Windows laptop but not macbook - help please!!

Hi! I'm a new customer to Verizon having just moved to the US from the UK. We have the DSL service with the 7500 Westell router. I've set up the wireless and it works fine on my husband's laptop (IBM thinkpad with Windows XP) but my MacBook just will not connect properly. I can see our network in the list, and it will connect, but either it drops the connection immediately after connecting, or stays connected and the internet doesn't work. The ethernet connection works absolutely fine. Any advice gratefully received!
thanks in advance,
Kate

Quick quote from the FIOS area..
http://forums.verizon.com/t5/FiOS-Internet/Ipod-Touch-quot-Unable-to-connect-quot/m-p/12508#M1968
remember that all apple products use lower-case letters in the passcode (WEP KEY), and use zero's ( 0 ), not capital O. Then you may need to, instead of just trying to connect to your network, go to 'create a new network' and enter all info there to build the new connection, remembering that you are using dhcp. Or you may be able to, after clicking on your network, find out how to enter your security code (WEP KEY) (passcode).
If you disable your passcode then anybody can use your wireless network
While you are not on FIOS, I hope this helps...
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

PEAP works with Windows zero but not with CSSC

Similar Messages

Maybe you are looking for