Pear 9105 RED Light and the Empty Battery Chargin Sign

THe last call i disconneted happened to be the last call.
THe phone refuese to start.
When connected to the BB charger the red light comes on steady for about 10 seconds and off
After about 5 seconds the battery charging sign comes on remains...
I tried to reinstall the OS
But the desktop fails to reconnect to the JVM after the up date and then en error on the desktops says failed to reconnect at this time the phone still shows the Battery charging sign
One interesting observation here would be that when i open the Apploader or even the device manager for that matter my BB pin is listed there..
THe device is 2 years old and this is the first ever issue.
I tried the usual deep charging.... battery removal and stuff.....
Any help would be appriciated

OK...please try this on a PC (you cannot do this on MAC):
1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below. (moot in your situation)
2) Uninstall, from your PC, any BB OS packages
3) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/software/desktop.html
4) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
Now try again these tricks (I gave you all 3 before, but you only mentioned that you tried one of them). If any of these instructions state to use an Update Website or something, please substitute the Desktop Software, as installed above, and/or LOADER.EXE as applicable to the method:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Do of course be aware that if there is some sort of hardware fault, then no amount of information we can give you can help...by continuing to try different things, you can rule in/out various software/OS level causes, but there is no way to truly diagnose a hardware problem. Only an in-hand evaluation by a qualified hardware technician can give you that type of diagnosis.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

My speakers on my macbook receiently quit working after I had been using some headphones. My headphones still work whenever I plug them in with both increase and decrease in volume. I have also noticed a red light on the inside of the headphone jack.

My speakers on my macbook pro quit working the other day after using my headphones. when I try to adjust the speakers my screen indicator sayes that it is at full volume on the bar but also muted(circle with line through it). I also noticed a red light inside my headphone jack. My headphones still work including volume. Any quick fix?

Hopefully one of these steps should solve the problem.
1. System Preference > Sound > Output > Internal Speakers
    Make sure Mute is not enabled.
2. Remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

I have a MacBook Pro. My mac can detect wifi. But will not connect. I did get connected vis TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest.

I have a MacBook Pro. My mac can detect wifi. But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest. (Network settings, ISP, Internet and server.)

Hello NotAppleSavy,
Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
Thanks for using Apple Support Communities.
Have a nice day,
Mario

I've got a mac pro problem with the starting up, but also a red light on the logic board solidly on. Its not among the diagnostic led. It's located near the BT adapter and the front fans. Also the fans run loud also. any solutions?

Hi
I've got a mac pro late 2006, and i am having problem with it for quite a while now. the problem i am facing is the start up process, and the red light on the logic board. Earlier I've got the two led on the diagnostic leds 5 and 6 turned on without the diagnostic button being pressed, and i think those are related to the processors overtemp. I've managed to solve that by, removing the processors and re applying the thermal compound on the heatsink. what i have left now with is the red light on the logic board at the time i plugged in the power. At the same time when this light come on, the power indicator at the front panel come on as well. i am not sure what is this light relates to. We've replace the power supply too, and gone through the SMC reset but seems no help.
Any idea on the problem? I am desperate about it, and i will be greatful if anyone can help..
thanks and hope for your best solutions
Kari

I can't help directly with your problem but you might check here http://tim.id.au/laptops/apple/macpro/ for a service manual which could answer your question.

No sound on my mac book and a red light in the headphone jack

as in the title,
The sound controls dont work and I have a constant red light out of the earphone jack, with the earphones in all is okay but without ....silence

The red light is the digital in light, that is how it reads the headphone jack. The reason the sound doesn't work is because a switch to turn the speakers back on is stuck (note that if you boot the computer, you will hear the startup tone).
There are several ways to fix this...
Some have found that putting the headphone plug in and out several times (maybe twisting it a little) will work.
Others have used a toothpick to adjust the switch (I don't advise this because the toothpick may break).
Instead of a toothpick, many have used a paperclip (probably best to use an insulated one). I couldn't get this to work, but I would suggest straightening, folding in half, then twisting the paperclip and moving it around in the port.
You can also use a sewing pen/needle.
I have seen all of these methods online, but they didn't work for me. I took a que from this instrucable and cleaned my jack with a dry q-tip. I then cut off most of the end and turned it around inside the port. This worked, but after I put the headphones back in the same problem came up, I just did the same procedure again and it worked again (even after I plugged the headphones back in and took them out).
PS: I woud suggest putting some q-tips and possibly some scissors in your MacBook bag in case the problem arises on the move.

My phone 5 died and now it wont turn back on or seem to charge at all. I've tried several different charger cords and outlets. And all the phone will do is show the empty battery symbol. please help! Any suggestions are apprecaited!?! thanks

My phone 5 died and now it wont turn back on or seem to charge at all. I've tried several different charger cords and outlets. And all the phone will do is show the empty battery symbol. please help! Any suggestions are apprecaited!?! thanks

Hello Cooper,
Thank you for the details of the issue you are experiencing with your iPhone 5. I would be concerned too if my iPhone was not powering on. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M.

Red light and won't charge

I got my bb 9300 a couple of weeks ago. my problem is that it suddenly shuts off and the led would turn to red light. it won't turn on. I thought it was just battery empty or something so I charge my phone, it them keeps on having red light and then keeps on having this image of no battery or something. It did turn on one time then vibrates hard and then turns off again. After that it won't turn on. just red light, no battery. Please help.

If you tried a wall charger (that previously worked with your shuffle) and computer ports, the most likely cause is a problem on the iPod. At seven months, it may not be the battery (although it sounds like you use it a lot every day), but it sounds like the battery is unable to charge.
Does the iPod still appear in iTunes when you connect it? If it does, you can try doing a Restore using iTunes.
Restoring iPod to factory settings - Apple Support
If the wall charger is something you did not previously try, it's possible that the computer's USB port is not supplying enough power. As a test, shut down (power off) your computer and disconnect all USB devices (including any hubs). You can leave standard keyboard/mouse connected, if used. If the computer is a laptop, connect its power adapter so that it's not running on battery power. Put the shuffle power switch in the OFF position. Start up computer, run iTunes, and connect iPod to a direct USB port on the computer.
At seven months, it is still under warranty.

Iphone 4 dead, red light above the speaker

hey, my iphone suddenly died yesterday. i was texting, browsing normally and couple of minutes later it was dead (battery was almost full). i tried hard reseting it, connecting it to my mba and nothing, itunes doesnt even recognize it. couple of hours later i saw this red light above the speaker and after some googleing i found this discussion
https://discussions.apple.com/message/16706124#16706124
where it says that the red light means my iphone was damaged by water. the only thing i dont get here is HOW since i havent dropped it, nor used it outside in the rain haha. i am kind of confused because i dont know if its dead or not. right now it's resting in a zip bag full of rice but i dont get it. could someone help me? thanx
i mean, its an iphone 4, ive been using it for years and this is the first time this happens, battery works great, phone works great i dont wanna change it. the only good thing is that it's helping with my addiction to internet hahhaa, first 20hours were baaaaad. thank you

Hey there lildl110,
Let's get that iPhone 4 to cool down. It sounds like the phone overheated and needed a bit of a rest. Is it still too hot to touch? If you've given it some time to cool down please try the restart method,http://vz.to/1ciOvXw.
Keep us updated with results.
NicholasB_VZW
Follow us on Twitter @VZWSupport

Red lights behind the power button

In reading through some posts last night I got the impression that I should be paying more attention to the lights inside the box, behind the power button, when booting (or I should say attempting to boot) my dual-core G5 PowerMac.
My observations this morning are that I see a big red light when the machine is first powered up from cold, and also when it is restarted. That goes off. A few seconds later, before the chime, I see a brief, much smaller red light flash in that same area. Almost a pinpoint.
Is that normal, or is it diagnostically significant?
(As noted in my earlier post today, I'm launching a final effort to fix this sick puppy before I give up and take it down to the Apple Store, but it needs to be a campaign of controlled baby steps.)
TIA,
Kathi

Hmm, on second thought I'm not so sure... but I don't have time to open the thing up right now and figure out exactly where each of those LEDs is. The drawings in that article and in my manual aren't terribly helpful.

Red light to the left of the receiver of the iPhone 5

I had my iPhone 5 replaced at the weekend for a speaker issue, but I noticed today when using the replacement in a dark room, I can see a glowing red light to the left of the receiver. I did a search, of course, which brought up results concerning the iPhone 4 and that it's the proximity sensor and not something to worry about. But I also saw this "eHow" article that says it's because the phone's been exposed to water:
http://www.ehow.com/info_8704998_red-light-iphone-mean.html
Earlier today I was using the phone when it started raining, so I quickly wiped it against my sweater and put it in my inside jacket pocket. I didn't think that would be enough to cause any damage to the phone and the phone is working fine, but now I'm a bit worried, having not noticed the light before.
Is the eHow article wrong or do I have a reason to be worried?
Thanks in advance for any help.

That's one of the most absurd things I've ever read...the light is part of the proximity sensor. The sensor is an infrared light that can appear red when viewed through the front glass in a very specific way in the dark (the glass distorts the infrared light enough to make it very weakly visible). This is totally normal and nothing to worry about. The water sensors are round white stickers in certain locations on and in the iPhone. When they get wet they turn red and do NOT turn back. The sensors wouldn't be very useful if they changed back when the phone dried...

Getting red light on the audio port

Hi, im not able to get sound on my macbook, ive tried using a headphone, and it works fine, but as soon as i plug out the audio jack, i see a red light on the audio port, and the sound icon is grayed out...
I've read similar problems on the forum, but could not get a resolution, can someone help me out with the correct resolution of this problem????

the toggle switch inside the audio jack it flipped the wrong way, so your mac still thinks your headphones are still plugged in. Try to rapidly insert and remove the headphone jack in and out of the port to toggle the switch back.

On my ipod touch 5 i can see clearly a red light insode the screen on a dark background but on a light background i can faintly see yhe red light what is the light i don't know

On my ipod touch 5 i can see clearly a red light inside the screen on a dark background and i can faintly see the red light on a dark background what is the light, i don't know help me!

You did not answer my question in my reply to your other post
https://discussions.apple.com/message/25834405#25834405
Did you try the suggestions in my other reply?
It is very rude and counterproductive to make a new post and not acknowledge replies to another post you made.

I tried down loading mozilla firefox to use as a web browser. It was downloaded 100% then when prompted to "run" the error message comes up with a red cross and the message'This file is corrupted" and won't let me proceed. What do I do now?

I tried down loading mozilla firefox to use as a web browser. It was downloaded 100% then when prompted to "run" An error message comes up with a red cross and the message'This file is corrupted" and won't let me proceed. What do I do now?

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.<br />
You can try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See http://kb.mozillazine.org/Unable_to_save_or_download_files

Hello , please am having a problem with my iphone 5 , the battery runs out quickly , also if i turn on 3G it will run faster , 15 minutes and the iphone battery will be out , and my final problem is that is "no service " appears a lot can you help ?

Hello , please am having a problem with my iphone 5 , the battery runs out quickly ,another problem also if i turn on 3G it will run faster , 15 minutes and the iphone battery will be out . My final problem is that "no service " appears a lot especially when opening wifi or 3G , can you help ?

Your battery is running quickly because your cellular data connection is weak.
Is your phone carrier a supported carrier: Wireless carrier support and features for iPhone in the United States and Canada - Apple Support
For your no service issues: If you see No Service in the status bar of your iPhone or iPad - Apple Support

After the publication on the hosting page does not open, and the empty html. What's the problem?

After the publication on the hosting page does not open, and the empty html. What's the problem?

NO - not correct. Even if you are still using iWeb 08, you can still publish to another host and not MobileMe. You do this by selecting the option 'Publish to a local folder" and this will publish the site to your desktop and you can then use an ftp programme such as Cyberduck to upload your site to your host.
MobileMe will not be here after the end of June, so you will have to find alternative hosting. They are not taking any new subscriptions.
On new Macs, iLife 11 is pre-installed, but only iPhoto, iMovie and GarageBand are included, not iWeb and iDVD. The Apple Online store is not selling the boxed version of iLife 11 any longer, so if you want to upgrade to iLife, then you'll have to look online at Amazon.com or Amazon.co.uk for a boxed set of either iLife 09 or iLife 11. Both contains iWeb 09, which is what you would want.

Pear 9105 RED Light and the Empty Battery Chargin Sign

Similar Messages

Maybe you are looking for