Pearl 8100 audio problem

i cant hear anything in my bb. i cant  even with the headset. this problem start when i was listening music with my headset. the audio gone in my headset and my bb. i cant hear anymore. i tryied turning off the cellphone, changing from loud to silence. this problem doesnt fix. 
please help

Hello Bifocals! Thank you so much for your reply and the useful information. Guess what? The phone audio is back  I did the basic troubleshooting battery pull (I was so stressed out that I never thought of this before).
By open edges, I mean that the headphone insertion point or hole isn't all round. There is small gap through which the back light is visible. I actually never noticed before if headphone jacks have gaps or not. Since my baby was trying to insert the headphone in the jack, I thought it might have broken.
Anyways, thank you so much for the headphone jack size and also for the repair website.
On a side note, I have been wondering if it is possible to transfer the messages from BB to computer or another cellphone.
Thanks, once again, for your reply. I really appreciate it. 
TWyPGn

Similar Messages

  • Pearl 8100 headphones problem

    Hi,
    Have just tried to play music through the headphone socket of my Pearl 8100. Instead of muting the speakerphone and routing the audio through the headphone socket, it just continues to play through the speakerphone and nothing comes out of the headphones. The headphones are recognised as it comes up with the "voice dialling" screen when I plug them in.
    I think the OS was upgraded to the latest one available for this, maybe 4.5?
    Any ideas?
    Thanks
    Tom

    I managed to fix it, I took the battery out and put it back in.

  • Pearl 8100 volume button problems w/ headset and speakerphone

    Thanks in advance for help on this weird problem. This is slightly long .. but hang with me :-) 
    My Pearl 8100 volume automaticallygoes down slightly below halfway when I plug in a wired headset (or Bluetoothheadset) or activate the speaker phone. The volume + up button will not work. The– volume down button works fine and when I push the + up and it clicks but doesnothing. When I’m in headset mode the volume will stay at 100% via calllog<options<general options<default call volume commands… but if push the volume – down in handset mode and try to push the volume back+up …it will not work.
    This problem seemed to start around the time when I upgradedto v4.5.0.110. Hard reset does not solve, so I wiped and re-installedv4.5.0.110 but had the same problem. Next wiped and installed an earlier versionv4.2.1.154 but had the same results. Finally, I wiped v4.2.1.154 andre-installed the latest v4.5.0.110 ... again.
    So I’m back at where I started ;-(  
    Thanks again for any help 

    CORRECTION:  I meant to say ... "When I'm in in HANDSET mode the volume will stay at 100% ... "
    Thanks in advance for help on this weird problem. This is slightly long .. but hang with me :-) 
    My Pearl 8100 volume automatically goes down slightly below halfway when I plug in a wired headset (or Bluetoothheadset) or activate the speaker phone. The volume + up button will not work. The– volume down button works fine and when I push the + up and it clicks but does nothing. When I’m in HANDSET mode the volume will stay at 100% via call log<options<general options<default call volume commands… but if push the volume – down in handset mode and try to push the volume back+up …it will not work.
    This problem seemed to start around the time when I upgradedto v4.5.0.110. Hard reset does not solve, so I wiped and re-installed v4.5.0.110 but had the same problem. Next wiped and installed an earlier version v4.2.1.154 but had the same results. Finally, I wiped v4.2.1.154 and re-installed the latest v4.5.0.110 ... again.
    So I’m back at where I started ;-(  
    Thanks again for any help  

  • Pearl 8100 Media Manager

    BB Pearl 8100 Media Manager won't play song on my laptop. Unless on the song list, right click and down a list. I can play only with Edit Audio Tags.
     Beginning when I click on the the Desktop Manager Icon, window pop up with Disconnected - Blackberry Desktop Manager.
    I intalls the software from CD three times and the problem is still there.

    perhaps these music files are protected by DRM (Digital Rights Management System)

  • Can't Import Outlook Express address book to Pearl 8100

    A friend just gave me an AT&T BB Pearl 8100 and I am using it as a phone only with no data plan (it's a company cell phone but they won't pay for a data plan -- I just put my SIM card in the BB).  I am trying to connect to my personal PC with the USB cable and import my OE address book.  I am using Desktop Manager 4.7, and when I try to synch it a window flashes that says "Synchronization Progress - Processing" for about one second, then that disappears and my phone doesn't get updated. Can someone help me?  I searched for this problem prior to posting but can't find this situation.  I dread having to type them one by one -- any help would be appreciated.  Thank you!
    Mike

    For importing the dbx files, see this page:
    http://thunderbirdtweaks.blogspot.ca/2011/07/outlook-express.html

  • Pearl 8100 Battery Issues

    My BB Pearl 8100 is always losing battery charge.  Anybody else having this issue and how can I fix it?  I charge my BB at least 3 times a day.  Once in the morning plugged into the outlet, once during the day at work through a USB port on my computer, sometimes I have to use the car charger to hold me over until I get home to plug it back into the outlet.  I'm extremely frustrated and would have never bought this phone had I known I was dealing with this problem.  And by the way, I only bought this BB (first one), sometime in July.  PLEASE HELP!  Thanks

    I just got my BB 8120 yesterday and I was told (after the fact) that its good practice to let your new phone charge for 24 hours.  Of course I wasn't told this by my Wireless company... I was told this by a friend of mine that was told this by a rep at a store location....
    I just got off the phone with my Wireless Tech Support, and they said that it doesn't hurt to let it charge, so that the battery learns to build it's charge as it goes along.  I was told that in essence, you should be able to get at least 4 days of use out of the phone.
    So... we will see.  I will post back and let you guys know if it worked.  If not I will be returning the phone for replacement in a week

  • Help: Calendar entries disappear on Pearl 8100

    I have a BB Pearl 8100 and have the problem that calendar entries disappear from the device. Entries as recent as those from the previous week all of a sudden disappear. I have re-synchronized several times (I use Outlook 2003 for calendar and contacts), and the entries stay in the device for a few days but after a week or so, all past appointments, except the recurring ones, just disappear. I don't have a problem with contacts, and I don't synchronize emails, so the issue is only Calendar.
    I have the Options set in my device to keep appointment forever, so that does not seem to be the problem.
    Does anyone know how to fix this? 
    Thanks a lot in advance. 

    Metroberry:
    I don't have ringtones, music or videos in the BB. However, I have 30,600 bytes "File Free", out of 64mm "File Total". I guess this would qualify as very little memory left. Doesn't make sense though, since the only things I have in the device are my contacts and the calendar. What could be using up the memory?
    Thanks for your help. 
    Claudia 

  • Blackberry pearl 8100

    when power on red status light gives 3 flashes pause then one more,  have to remove battery to stop
    what may be the fault

    am using blackberry pearl 8100
    software version  V4.2.1.107
    pin 23F8CF41
    i have been getting problems when browsing due to the operating system.
    its very old. i using the desktop software V6  to upgrade and it said that
    there are no updates. please i really need help on how and where to upgrade my smartphone.

  • Pearl 8100 not turning on seing led light twice?

    hello,
    i got a really terrible problem i  dont know the solution for my pearl 8100
    yesterday i want to unlock my bb with (the unlock software)but it was aborted and after that the bb just show's led light twice and doesn't turn on and also my pc doesn't recognize the bb either desktop manager ??
    please help me im not so good in this but any solutions.

    Hi mister-n,
    Welcome to BlackBerry Support Community Forums.
    Try the following steps to reload your device software when the device is not being detected by the computer.
    1. Verify that the BlackBerry Desktop Manager and BlackBerry Device Software are installed on the computer.
    2. Remove the battery from the BlackBerry. Do not re-insert.
    3. Connect the BlackBerry to the computer.
    4. On the BlackBerry Desktop Manager main screen, click Application Loader.
    5. Click Start.
    6. Click Options to add or remove applications.
    7. Click Next.
    8. Click Next.
    9. Click Finish.
    10. Immediately after clicking Finish, insert the battery into the BlackBerry smartphone.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • BB Pearl - 8100 Bluetooth: "Unable to locate Object Push Server..."

    I just purchased a New 2009 Audi A4 that has Bluetooth, however my Blackberry Pearl (8100) does not correctly transfer the Phonebook.  Based on what I've read on various message boards, I should be happy it at least functions to make & receive calls, however when I try to sync the phonebook, I receive an Error:  "Unable to locate Object Push Server..." 
    My BB Pearl has the following OS Version - 4.2.1.96 (Platform 2.3.0.78).   
    Based on the Official Audi Documentation, Research In Motion (RIM), Blackberry 8100 (Pearl), GSM, 4.2.0.51 was certified to work with the car.  I assume (maybe incorrectly) since I'm at a higher version, I should be ok.  I reviewed and have tried several options below, however have not been successful. 
    1.  Turn on Car & Pair, disconnect Phone, then Reconnect and manually "Transfer Contacts"
    2.  Move Contacts into a Specific Category, then in the Bluetooth Menu just sync that particular category...manually " Transfer Contacts"
    3.  Disable Encryption & manually "Transfer Contacts" In my Bluetooth menu, it says the following Bluetooth Options are available: 
    Discoverable: Yes
    Allow Outgoing Calls: Always
    Address Book Transfer:  All Entries
    Led Indicator:  On
    Services
    - Headset
    - Handsfree
    - Dial-Up Networking 
    Any ideas?
    Thanks,- Nick

    I too have a 2009 A4 Avant Audi - initially the BB and car paired beautifully, but after two weeks the phonebook would no longer transfer.  I managed to solve the problem by deleting the call log.  the BB keeps a lot of history and it seems as if over time, the memory get clogged, preventing the transfer of the telephone book.  On trying to doing it manually, you then get the unable to locate object push server.  Try it, it worked for me

  • Blackberry Pearl 8100 as a modem

    I have a Blackberry Pearl (8100) with AT&T and am using AT&T as my ISP. How do I use the phone as a Bluetooth modem with my MacBook? The salesperson at the apple store said I needed an External USB Modem. I can pair the phone with the MacBook, no problem, but it doesn't seem to connect to my ISP.

    Find the 1st occurence of "Blackberry" on this page...
    http://www.fibble.org/archives/000508.html
    Basically, get this Modem Script...
    http://www.fibble.org/BlackBerry%208100
    Then fill in the rest from that page.

  • Stereo Bluetooth for Pearl 8100??????

    Is there anyone out there who has found a bluetooth that will stream music through it from the Pearl 8100?  To my knowledge the phone doesn't support the A2DP Profile and that's why music doesn't stream through to a stereo bluetooth.  But is there a software for this phone that will enable that function.  I would really like a solution to this problem.  Can anyone HELP?

    Till now rumor is like that. No one is confirming the exact features of new os. We'll have wait till the new release.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • Poketmac Crashes 4.1.25 with Pearl 8100

    Hi!
    I have problems to sync my bb pearl 8100 with my macbook pro (Intel, Leopard 10.5.5).
    I installed PocketMac, restart, opened the programm.
    The i want to change the settings "Advanve Pref" of AdressBook etc.
    After i click on the "Pref" Button, my mac says for example "Prgramm ABRimContacts crashes"...ignore, report, start new.
    I hope u understand my main problem.
    Please help me!
    Chris 

    This shouldn't happen! There is no reason that one device (8800) will work and other (8100) will not. Please confirm the OS version on both of the handheld. Are you getting any sort or error messages?
    Message Edited by tanzim on 04-15-2008 12:18 AM
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • Computer with Vista not recognizin​g my Pearl 8100 through USB

    Hi my computer will not recognize my Pearl 8100 through USB connection and my computer is a little older so it doesn't have Bluetooth to try that. I've read some of the info from others having similar problems and I have checked my cable which is fine and have tried using a USB slot on the back of my computer rather than a USB hub to no avail. Any other ideas?

    Hi and Welcome to the Forums!
    Here is the list of troubleshooting KB's...hopefully something will be useful:
    KB02640 Troubleshooting USB connections
    KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
    KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
    KB00019 No PIN displayed in BlackBerry Desktop Redirector
    Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
    Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these.
    Hopefully something there is helpful!
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Blackberry pearl 8100 as a tethered modem - once worked fine but not anymore

    For about a year upto late Sept 2008 I had been using my bb pearl 8100 as a tethered modem.  Although it was slow I was able to access the internet from my desktop pc.  But for some unknown reason in late Sept 2008 that all changed - i.e. I can longer access the internet from my desktop pc via the pearl - and neither I nor my ISP can work out what why. 
    I have uninstalled and reinstalled bb desktop manager (three different versions, the latest being 4.2.2.6), I have updated my device software, I have updated the modem drivers, I have installed the desktop software on 2 other computers and connected the pearl but I continue to experience the same problem, that being that although I am able to establish a phone connection little or no data is being transmitted.  The best I have been able to acheive is sending about 35k of data and receiving about 2.5k over a 3 hour period.  On most other occassions no data is exchanged at all although a connection is established.  Has anyone else ever experienced anything like this?  If so, how (if you did) did you  resolve it?  I'd also welcome any suggestions from others who think they have a solution.  Thanks. J.

    in windows XP you can try:
    1. Select Start> Settings> Network Connections.
    2. Double-click the New Connection Wizard. New Connection Wizard will open.
    3. Click Next.
    4. Select the option Connect to the Internet. Click Next.
    5. Select Setup my connection manually. Click Next.
    6. Select Connect using a dial-up modem. Click Next.
    7. If the Select a Device screen appears, select the Modem - Standard Modem check box. Click Next.
    8. In the ISP Name field, type a name for your connection. Click Next.
    9. In the Phone number field, type * 99 #. Click Next.
    10. Indicate which users will have access to the connection. Click Next.
    11. Enter your user name and password provided by your service provider. Click Next.
    12. Click Finish.
    13. In the Connect window, click Properties.
    14. In the Properties window, verify that Modem - Standard Modem appears beneath the Connect using heading, then click Configure.
    15. In the Modem Configuration window, clear the Enable hardware flow control check box and make sure all of the other boxes are not checked above. Click OK.
    16. In the Properties window, click OK
    in Ubuntu, I can not try it but I've tried in XP and succeeded.... good luck

Maybe you are looking for

  • Word 2008 doc saves into multiple docs instead of one PDF

    I have installed Acrobat 9 Pro and am trying to print a Word 2008 doc to a PDF. Instead of creating and saving as one document it splits it into several whenever the page set up changes from profile to landsacape or vice versa. This happens whether I

  • How do I un-delete a purchased app?

    I accidentally clicked the "x" button next an app in the Purchased screen. Now, I can't get the app to appear in my Purchased screen again. Is there anyway to get this back? Also, what does the "x" do? I clicked it because I thought it would temporar

  • Self Registration Error

    Hi All I am getting an error in the Self Registration using OIM 11.1.1.3. and heere is the exception . Any idea what wernt wrong . it seems that oiminternal does not have access to create the request but I checked the oiminternal user roles and he ha

  • Creating Check Boxes

    I created a 30 page Form in Microsoft Word with 20 to 30 check boxes on each page using the Zapf Dingbats Font. When I used Acrobat XI Pro to automatically convert the form it fails to create usable check boxes. It worked properly about 3 times on te

  • Backup Mail Procedure: Best Practices

    We are a mixed-environment company, 5 Windows & 4 Apple servers. We have a dedicated backup server (Windows 2003) where we run Symantec Backup Exec to go out and back up data across our network during the night. I would like to incorporate our new Ma