Pearl 8120 factory default

Hello, how to reset Pearl 8120 to the since I have some issues and I want to clear them.
thanks in advance
Solved!
Go to Solution.

Baccaraty wrote:
Thanks very much for you kind reply and help ...
wow 44 person and no reply ,
any way .. thanks to google for help me solve the problem
Hello and welcome,
Just a reminder that these forums are user to user help forums, so people volunteering their time and knowledge. Not everyone has the same level of knowledge, so the person who has the answer you need may not have logged in yet, so please be patient if an answer does not come along quickly, especially if you post late at night on a weekend and check back in the next morning when many people still may not be awake.
Now, for the answer to your question ...
From the user manual:
Delete all device data
Verify that you have a backup copy of your BlackBerry® device data.
CAUTION: If you have turned on content protection, the process for deleting all device data can take up to an hour to complete. You cannot stop the process after you start it. If you reset your device, the process continues after the device restarts.
1. In the device options, click Security Options.
2. Click General Settings.
3. Press the Menu key.
4. Click Wipe Handheld.
5. To delete all third-party applications from your device, select the Include third-party applications check box.
6. Click Continue.
7. Type blackberry.
Cheers!

Similar Messages

I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo

I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo on it. Sounds about right, right? But now, there is a processing circle on top of the logo, but the circle spins once, and stops at about halfway to the bottom. It just stays there, and about every half to one hour it becomes a white screen and starts all over again. (not the loading bar part, just the circle). I've tried holding the power and the home button, and it works, but it just goes back to the circle screen with the apple logo. HELP PLEASE?

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

How do I reset an iPad 2 to factory defaults when I can't recall the Restriction passcode?

I have tried all of the suggested reset methods and still cannot reset to factory defaults. Somehow I setup a restrictions passcode that I can't find or remember so I seem to bee stuck.
Does anyone have a solution?

The only option is to wipe the device clean and restore it to factory settings.
Follow the instructions in iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
 Cheers, Tom

I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer. Any ideas?

I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer, although they are in the iTunes library on the computer and will play. It's these songs that won't transfer to the iPod. I have deauthorized and re-authorized the computer but no joy. Any ideas?

Hello there DesertRat71,
I was thinking that some of the songs in your library may have been purchased under a different apple id. You have already done the first thing I would have done by de authorizing and re authorizing. To verify this, highlight one of the songs that will not sync over and use File>Get Info. Here is the help menu link for it if you need it help://bookmark='https://help.apple.com/itunes/mac/11.0/help/index.html?localePa th=English.lproj#itns2937'
In the Summary section there will be an Apple ID entry. If it shows something different than what you are currently using then I recommend signing into the Apple ID it shows and authorizing the computer for that one as well.
All the best,
Sterling

My ipod touch 4g does not show in Windows 7 or itunes. I've removed and reinstalled itunes, stopped and started apple mobile services and changed out cables. Ipod is charging when connected. I've also done a complete rollback to factory defaults.

My ipod touch 4g does not show in Windows 7 or itunes, I've removed and reinstalled Itunes. I've done a factory default, and I've changed out cables. The ipod shows connected but does not show.

Did you remove and reinstall all the Apple software by:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Run this to see if it helps determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if you have an iPod or computer problem'
Last, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

IOS8 is too slow on iPad3! Can I restore to my 7.1.2 backup without resetting to factory defaults?

IOS8 is too slow on iPad3! Can I restore to my 7.1.2 backup without having to reset to factory defaults? I have both iCloud and iTunes backups....

No.
Apple has no support or provision for reverting to a previous iOS version.
Try a reset of your iPad by holding down the power button and hone button simultaneously until your iPad screen goes black and the Apple Logo reappears on screen, then let go of the buttons.

C855-S5190 restored via recovery to factory defaults, ran the Toshiba updater, no Windows Update

I'm desperately searching for help! My elderly father has a C855-S5190 and after trying the update to Windows 8.1 from the store, the laptop doesn't boot all the way up - kept giving various errors. So, he dropped if off for me to try to fix. I couldn't get around it so I did the restore to factory defaults from the restore disks.
After that all finished, I tried the Toshiba service station and it gave me about 7 updates that I installed. After that, I rebooted and then wanted to see about doing the Windows 8.1 update. Went to Windows Store - it says I need to do Windows Updates. I went to search, and now there's no Windows Update showing anywhere. I checked settings, and everything is empty under there as well. What happened??
If someone could tell me how I can possibly do the Windows Updates. I tried this once before trying the service center, the updates either fail, or they install, then it reboots, can't configure them, and gets stuck in a loop of trying to roll things back. That caused me to have to do another restore to factory defaults - I've had to do it 4 times so far, and I just don't want to get stuck in that loop again. So, I need to know what happened to my Windows Update, how do I get it back, and how the heck do I get this thing updated to 8.1?
I booted a Linux live media before starting and was able to recover the files, etc., he had on it to a USB flash drive since I knew doing the restore would wipe that all out.
Any and all input is GREATLE appreciated!!
Dave

Here's the link to the Microsoft page, I had to do this to get Windows Update to run. The Windows 8.1 upgrade would not let me do the upgrade until Windows Update was run, and I kept getting this error. It takes a *long* time for this to straighten out if you've done a factory defaults restore - several reboots, etc..
http://support.microsoft.com/kb/949358

How do i edit the service book on my pearl 8120

I bought a sim free pearl 8120 from the carphone warehouse in the summer and put a virgin mobile sim card in it everything works fine but the picture messaging i have contacted virgin and they have sent me what i need to put into the service book but i dont seem to be able to change it
Any information please let me know
Or if you know how to directly contact RIM because i got annoyed with the sites navigation........

Greetings, and welcome to the BlackBerry.com Support Forums.
What did they send you? Can you post the file name?
You can't contact RIM directly without a per incident charge fee. Your carrier handles the initial support and warranty on the device, and you must go through the carrier. You can call them and ask to be bumped up to a RIM support level.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Itunes doesn't see my ipod shuffle and I want to reset it to factory default

I have a 1st gen ipod shuffle, iTunes does not see it but my computer does, I am running windows 7 and I just want to restore the shuffle to factory default

So, I found out how to fix this issue. In "My Computer" right click on the iPod and format it. I chose to format it using FAT and Default allocation size. After that, I opened iTunes and it recognized my iPod Shuffle. It said it wasn't formatted properly but gave me the option to restore it to factory defaults which fixed everything. Way to go Self. Thank you. You're Welcome

So I backed up my iPhone on iTunes and I need to erase everything and restart my phone to factory defaults. If i erase everything then click restore will that work?

SO I BACKED UP MY IPHONE ON ITUNES AND I NEED TO ERASE EVERYTHING AND RESTART IT TPO FACTORY DEFAULTS. IF I ERASE EVERYTHING ON MY PHONE THEN CLICK RESTORE BACKUP ON ITUNES WILL THAT WORK?

Thank you so much! I was really hesitant because I did not want to lose everything on my phone.

HT5622 I recently purchased a use 2nd generation iPad. I was told the Apple ID is locked. If I re-set the iPad back to factory defaults and erase all former info on the iPad. can I now use my Apple ID to install Apps and connect to my Apple Computer?

I recently purchased a used 2nd generation Apple iPad. I was told that the iPad is locked because of Apple ID. I plan on erasing everything on the iPad and setting it back to factory defaults. Can I now use my personal Apple ID via my iMac to start it as it originally came from Apple??

It is a brick! But I did somehow get into the iPhoto section and was able to find the Former owner that owned the iPad and was able to contact him VIA FaceTime. on my iMac. He was of little help because he was not the original owner, but he bought the iPad as I did from a huge supplier and i was able to contact that supplier who refused to give out any information about the previous owner. I had the iPad hooked up to my somehowiMac via the USB cable and went through the setup procedure to no avail. Then after pressing the Home button several times it somehow went to the iPhotos that were on the iPad? There were 2 pictures of the owners email address. I then copied them to my iMac and used iPhoto app to enlarge the photos. It worked.So there is a way,just takes time to somewhat hack into Find My iPad?Phone.
Personally, it is not Apple's responsibility to protect customers of their personal DATA. With such a high security application. Then of coarse it is a great idea. Then again it is the responsibility of the former owner to wipe and rest the iPad before reselling it. This being the case like those sold on eBay and elsewhere that are ID Locked should not be allowed to be sold. Personally the ID lock is much like a VIN number of a car. In most states one cannot sell a car without the VIN Numbers. Somewhat the same thing should be true of ID Locks

Does BB Pearl 8120 os work on the Pearl 8100?

Hi,
I have a t-mobile blackberry pearl 8100 os ver 4.2, I would like to upgrade it to a os 4.5 so I can take advantage of some of the blackberry apps but the only phone I found was a pearl 8120 os ver 4.5 that I downloaded from the t-mobile site will the 8120 os work in a 8100? If so, how do I do it?
You can email me directly at [removed personal information]
Thanks gbj

Nope, sorry. Only 8100 OS for the 8100.
Here's the link and instructions.
Do a complete backup first, using Desktop Manager.
http://www.blackberryforums.com/general-8100-series-discussion-pearl/212060-latest-os-8100-4-5-0-304...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to reset a ISE device to factory default?

Hello guys,
I just started learn Cisco ISE (TrustSec 2.0), i have my company device which that set on pre-configured configuration from my company meant configured database password.
So i want to ask that how can i reset ise device to factory default configuration.
Plz give me answer as well as possible, thanks in advance.

Sure...
application reset-config Resets the Cisco ISE configuration to factory defaults.
Sent from Cisco Technical Support iPhone App

Satellite L300-20D - Reset to factory default - How?

Hi,
My Laptop is Kind Of Messed Up At The Minute And I Am Looking To Reset To Factory Defaults.
Can Anyone Tell Me How To Do This?
Thanks.

Hey,
The exact procedure for HDD recovery is described here:
http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
But therefore the original OS from Toshiba (Vista) must be installed. If you have installed another OS you have to use the Toshiba recovery disk that you created.
The installation from Toshiba recovery disk you can start if you boot from CD/DVD drive. Then follow the screen instructions to install Windows.
Its very easy because all drivers and tools will be installed automatically.
Please send some feedback if it worked or not. ;)

How do I set an ICIM in a Prisma 2 chassis back to a factory default?

How do I set an ICIM in a Prisma 2 chassis back to a factory default?

You need to read the documentation carefully:
The Deploy Agents install package is created using a Configure Automatic Account Creation wizard. The wizard copies agent settings from an existing machine ID or machine ID template and generates an install package called
KcsSetup.All settings and pending agent procedures from the machine ID you copy from—except the machine ID, group ID, and organization ID—are applied to every new machine ID created with the package.
Including Credentials in Agent Install Packages
If necessary, an agent install package can be created that includes an administrator
credentialto access a customer network. Credentials are only necessary if users are installing
packages on machines and do not have administrator access to their network. The administrator credential is encrypted, never available in clear text form, and bound to the install package.
¯\_(ツ)_/¯

Pearl 8120 factory default

Similar Messages

Maybe you are looking for