Pearl: can't figure out how to set up email...
I purchased my Pearl about 2 wks ago, and haven't had any luck with email setup. I previously had a bb for work, but that was managed through a work account. I'm trying to view my local IP email via my bb, and not sure it can be done at this point. This is probably pretty basic, but it's confounding for me so far. Any help?
Follow the below procedure to integrate your mail IDs-
Click on the E-mail Settings icon. User will be prompted with BIS Terms and Condition
On click of E-mail Settings user will be prompted with BIS Terms and Conditions
User need to click Yes and also Agree on the mentioned Terms and Conditions
Upon agreeing the Terms and Conditions Email Account Setup prompt will appear. From this part user will be able to integrate his/her existing email accounts
For integrating existing email accounts type in the Email Address and Password as requested
Upon clicking the Next button you’ll receive a notification of successful integration of BlackBerry. Click OK to finish the integration
Right after successful Integration handheld will receive an email from Activation Server. This is an welcome notification for you
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit
Similar Messages
-
I can't figure out how to delete and email address for someone that is no longer valid.
I can't figure out how to delete an email address that is no longer valid.
Assuming that this is on your iOS device, then you can change a contact's details via the Contacts app. If it's not linked to one of your contacts then I get a blue 'i' to the right of the email address on the popup list :
Tapping on that gives me a second popup, at the bottom of which is : -
I'm trying to change my security questions because I forgot them. When I have them sent to me via email it's going to a diiferent email. I can't figure out how to change that email that the security questions are connected to. It's not the one that I can Edit on my Account.
You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(95621) -
I have tried to figure out how to set my history to only save 2 days. I am sure that in previous version of firefox that this option was available where as in this one I don't see that. So I am either blind that I can't find it in the history option or it doesn't exist. It seems the options are remember history no limit or always to remove when closed. I want the options of setting how many days not the other two. Is there a way to do that? Thank you.
No need to crop your clips. The mask does the cropping of the upper clip.
To use the image mask, you need an image to place into the drop zone in the inspector. In your case you'd want a simple black to white gradient as the image mask and choose Luminance in the Image Mask source luminance pop-up. I'm attaching a sample gradient. The original was 1280x720 to match a 720p movie but the forum shrinks it down. This gradient was created in Photoshop in less than 30 seconds.
You import this gradient file into your event. Click on the Mask Source in the Image Mask effect and then click on the gradient file in your event list and click Apply Clip. Change the Mask Source to Luminance. Change the offset mask parameters to move where the gradient lines up in your movie. -
Can't figure out how to set my midi controler to control the sampler!
I have a Korg Kontrol49 and I want to be able to control the sampler knobs and faders with the ones on my Korg. I have it connected threw USB. It works for the keys but I can not figure out how to program the rest of it. Any help would be great. I tried reading everything I could to get it to work but I cant. Please help!
Thanks
Mac Pro Mac OS X (10.4.8)Press Command-L. Touch the onscreen control. Twiddle your MIDI knob. Assignment learnt.
Then go read the manual on Controller Assignments... -
I can't figure out how to set a breakpoint in a SenTestingKit unit test
I'm learning Cocoa after decades of doing other languages. I'm trying to use SenTestingKit for unit tests. One of my unit tests doesn't work, and I want to set a breakpoint to figure out why. So far, I haven't figured out how to do this.
I found Chris Hanson's instructions for how to do this, but he apparently wrote them for an earlier version of Xcode, and I don't know enough to adapt them.
I am writing a tutorial document for writing a simple Cocoa App using Xcode 3.1, git, SenTestingKit, and OCMock. It's at http://xorandor.com/FirstCocoaApp. I've got it up to the point of trying to debug a unit test, and I'm stuck there.
I also couldn't figure out how to have Xcode run the unit tests while building the application. Again, Chris' instructions didn't quite do it, and I don't know enough to figure out the rest.
So, if you know how to do this, please give me some hints. I'll put those into my tutorial, so that the next people who need this can find it.
Thanks,
PatI figured out more of my problem, but I haven't solved it yet.
What happens is that, after I create a test case, I try to run it with a breakpoint. After I start the program, Xcode turns the breakpoint from blue (meaning active) to orange (meaning that it can't set the breakpoint).
Several people have said to turn off the Lazy symbol loading preference. I did that, and that didn't fix the problem.
I wrote up a detailed list of steps that I took at http://www.xorandor.com/DebugQuestion.txt
I also put a copy of the project file at http://xorandor.com/MyProject.tar
If anyone has any suggestions on what to try next, please let me know.
Thanks,
Pat -
The font on my 3gs suddenly went oversize, does not fit the screen, and I can figure out how to reduce the size. It is almost impossible to move around let alone type.
Try double tapping with three fingers.
Them go to Settings > General > Accessibility > Zoom OFF. -
Can't figure out how to set a frame width
Noob questions I suppose....our instructor has us creating a
site using only framesets. I realize this isn't the best way to go,
but we are leading our way up to CSS.
If you look at my navbar, it needs to be 125 to be able to
fit my buttons, but I can not for the life of me how to set the
width of that frame.
Also, how do I name the site on the index file from "untitled
document" to what I want. I know how to do it on individual
pages... or normal index pages, but here, it does not seem I can
pull up the index file alone without everything being loaded and no
way to edit the index file.
Edit: Forgot to provide the link:
http://www.webrevamps.com/assignment10/index2.html
And the pages should not scroll. Hopefully I did that right.
Thanks!Your instructor should be relieved of their duties. Nobody
should be
mentioning frames nowadays except to note that they are
antique and should
only be used on special occasions, and that their use will be
left up to the
reader to determine.
> If you look at my navbar, it needs to be 125 to be able
to fit my navbar,
> but
> I can not for the life of me how to set the width of
that frame.
You set the width of a frame the way you'd expect to - in the
frameset page
definition. When you create a framed site, you first create a
frameset page
that defines the width and height of every frame in the
frameset, e.g.,
<frameset rows="80,*" cols="*" frameborder="no" border="0"
framespacing="0">
<frame src="UntitledFrame-112" name="topFrame"
scrolling="No"
noresize="noresize" id="topFrame" />
<frameset cols="80,*" frameborder="no" border="0"
framespacing="0">
<frame src="UntitledFrame-113" name="leftFrame"
scrolling="No"
noresize="noresize" id="leftFrame" />
<frame src="UntitledFrame-114" name="mm_target"
id="mm_target" />
</frameset>
</frameset>
This defines a frameset containing two rows, one of which is
split into two
columns. The top row is 80px tall, and the bottom row is
whatever is needed
to fill the browser's viewport in height. The bottom row
contains two
columns, the leftmost of which is 80px wide, and the
rightmost is whatever
is needed to fill the browser's viewport.
As mentioned, if your instructor hasn't given you this
information they are
doing a double bad job.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"motleyscrewed" <[email protected]> wrote in
message
news:[email protected]...
> Noob questions I suppose....our instructor has us
creating a site using
> only
> framesets. I realize this isn't the best way to go, but
we are leading our
> way
> up to CSS.
>
> If you look at my navbar, it needs to be 125 to be able
to fit my navbar,
> but
> I can not for the life of me how to set the width of
that frame.
>
> Also, how do I name the site on the index file from
"untitled document" to
> what I want. I know how to do it on individual pages...
or normal index
> pages,
> but here, it does not seem I can pull up the index file
alone without
> everything being loaded and no way to edit the index
file.
>
> Thanks!
> -
[email protected]
Firefox has always opened a blank new tab, if it opened to anything else that would be caused by an add-on. Check your add-ons to see if any offer this feature, or if any were disabled when you updated to Firefox 4.
The NewTabURL add-on can be used to open a page of your choice in new tabs - https://addons.mozilla.org/firefox/addon/newtaburl -
Can't figure out how to change my email and password for the message board...
I did password recovery earlier and ended up with some short (insecure) temporary password. I've wasted WAY too much time looking for a place to update my username and password, but I just can't find it.
Solved!
Go to Solution.While there is no way to change your username, you can go here to edit your email and password.
http://homesupport.cisco.com/en-us/mysupport/editprofile
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router -
I am connecting my new iMac to my Buffalo router. I forgot my router password so I pushed the reset button and my computer was able to connect. The problem is, I can't figure out how to set my new password and lock the router. I went to the Buffalo website and downloaded the CD, as I can't find that either. I can't open any of it because it says it is Windows and can't open it. I am new to Apple!
kellyfromdanville wrote:
I am new to Apple!
Ah, new to routers too.
Perhaps it's best to have a local computer support person come set you up?
To explain everything would require writing a book here.
But this is what you want basically.
Router, new Wireless N, firmware updated.
1: Two accounts, one admin, one guest Internet access. Random +30 plus character lenght passwords each preferred.
(guest password to max password length of any iDevices)
2: Encryption: WPA2 AES. No Ping. No remote access. No MAC filtering. Visible.
3: Guest access on devices and computers only. Passwords written down and stored.
4: OpenDNS preferred but not mandatory.
If you get OpenDNS, you can log into their website for free and set parental controls on things like inappropriate sites for children. So whatever device is used on your network can't access a large portion of those sites (nothing is perfect) by most users who are not technical oriented.
What your doing now is running the bare bones unsecure router which can be used harmfully against you.
Even a Apple Airport router has to be very well secured. The defautl cd and out of the box setup is not a secure solution. -
I have deleted my browser app, and now I can't figure out how to set it so that when I press the web button, it will automatically use firefox instead if chrome
You can go to '''Tools''' >> '''Options''' >> '''Advanced''' >> '''General''' the last option if you check it, always that you start Firefox, it will check if it is the default browser :
*[https://support.mozilla.org/en-US/kb/how-make-web-links-open-firefox-default?esab=a&s=set+firefox+as+default&r=3&as=s How to make web links open in Firefox by default] -
On my i-phone, my contacts are backed up on i-cloud, That seemed to have happened automatically, but I can't figure out how to set up so that my calendar, notes & mail are also backed up.
Contacts, as well as calendar, notes, mail, are NOT included in an icloud backup. They reside in their own databases on icloud.
-
How do I use GarageBand as a amp/speaker to listen to my Electronic Drum set? I have a MIDI-USB cord already but I can't figure out how to listen to my set through the software using my computer speakers?
If you want to listen to the sounds of your drum set, you should use an audio cable and connect it to the computer's line-in, then create a real instrument track.
If you use a Midi/USB interface, you'll have to create a software instrument track and select one of GB's drumsets as the instrument. Hopefully your drumset's midi notes are mapped to the right sounds in GB. -
I can't sign on to icloud. It says I need an icloud account. I click the help option it send me back to the same page. I reinstall it nothing.
Download the iCloud Control Panel.
To enable iCloud on your Windows PC, first set up iCloud on your other devices, then install the iCloud Control Panel for Windows (Windows Vista with Service Pack 2 or Windows 7 required).
ok I can't seem to set up iCloud on any device I don't understand... Ive already installed it three times.
Turn on iCloud.
From the Windows Start menu, choose iCloud Control Panel.
Enter the Apple ID you used to create your iCloud account and select the iCloud services you’d like to enable.
For mail, contacts, and calendars, you can use iCloud.com or Outlook 2007 or later.
there is no iCloud control panel but I click on i cloud. Then entere the Apple ID you used to create your iCloud account - WHAT!!!!? where is this I keep trying to find out how to create and iCloud account but I keep getting these stupid directions!!!
Enable automatic downloads.
To enable automatic downloads for your music, apps, and books, open iTunes > Edit > Preferences > Store and select Music, Apps, and Books.* (Requires iTunes 10.5 or later.)
- This is the only step that makes sense and already did it...
Turn on iCloud for the rest of your devices.
To get the most out of iCloud, set it up everywhere.
This is soooo frustrating!!!!
Also I want to be able to look at duplicate songs on my itunes but after I downloaded the new version I can not figure out how to get that back. If the duplicate setting isn't in the new itunes I want the old version back.Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.
Maybe you are looking for
-
Print multiple copies in Crystal Report
Hi All, I have created layouts with Crystal 2008 . I need to print first copy as original , second as duplicate and the third as triplicate . I know it is possible using PLD but i need it in CR. Is there any work-around for this problem ? I am using
-
Can smart builds include other actions? Or can I copy a build?
I have a smart build with dissolves in and out. A few slides do need bullet builds. So far it seems that I'll just have to build the presentation slide by slide in order to incorporate the different builds. Any suggestions? Also, a possibly related q
-
Sql Transposing Column Name in Row
i am using Sql Server 2008 tbl_EmployeeProfile EmployeeId EmployeeName LeaveApplicable Active 1 Sam true true 2 Rahul false false 3 Sameer true true tbl_MasterLeave id LeaveCode Description active 1 PL Paid Leave true 2 CL Casual Leave true 3 SL Sick
-
I want ti know the receipt of payment that i purchased one year astrill program using so kindly give me the receipt of payment to give that to astrill support because i have the problem with them because i already paid around 70$ in apple store for t
-
Hi, I uploaded an external definition (WSDL file) into XI since I want to call a web service in my scenario. After uploading the file and opening it within XI I can see two different wsdl files depending on which tab (imported document <-> WSDL) I c