Pearl with memory card works until synch with desktop mgr

I have a Pearl 8130 and a 4gb MicroSD HC card. The card has been formatted and I used the Roxio software from desktop mgr to move stuff to the card. All was good. Now each time I connect the pearl and sync with the desktop software, once I disconnect from the laptop, the phone doesn't recognize the memory card. I have to "add" it each time and then it works fine. Any idea why my connecting to the desktop software would somehow make the phone no longer see the memory card? I searched in the support forums and nothing came up.
Desktop Mgr ver 4.3.0.17, smartphone v 4.3.0.97
Media card support On, Mass storage mode On, Auto enable Mass Storage Mode Yes, Total space 3.7GB, Free space 3.4GB
Thanks.

hi Sanj, you may try to delete everything form the memory card with a card reader under windows, or also may try to format the memory card to fat32, and then try use it again with your phone. I recommend to format the card with the phone after it started successfully.
Nokia N80 v4.0707.0.7

Similar Messages

HT201401 4s with latest software update will not power off, text will only vibrate, iPod only works with earphones. When I sync it with iTunes it works until power save mode starts, then back to not powering down, making text sounds, or playing iPod out l

4s with latest software update will not power off, text will only vibrate, iPod only works with earphones. When I sync it with iTunes it works until power save mode starts, then back to not powering down, making text sounds, or playing iPod out loud.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

Problem with memory card slot on nokia c5 03

Sir,
I have a Nokia C5 03 from the last 8 months.....
Working very well.
Recently, my memory card stopped working.
I thought that there might be a problem in the memory card and bought a new one.
Even though i inserted new card in my phone, i am getting the same error.
In file manager it is displaying as "Memory card Corrupted."
I have checked the new memory card by inserting in to another phone which was working normally.
There i have even formatted the new memory card and again inserted into my c5.
Then also i am getting the same error message........
Can any one suggest me what to do in this regard??????
Thanks in ADVANCE.
Solved!
Go to Solution.

Hi,
Welcome to the forum!
Have you also tried inserting the old memory card to another phone as well? What happened after inserting it to another phone? If it's working properly with another phone, the memory card slot of the C5-03 might have an issue so you should bring it to the repair facility to have it checked.
You can search for the nearest repair facility in your area from this link: http://www.nokia.com/in-en/care-point-finder/
Hope this helps.

Has anyone had a problem with memory cards switching the file from EOS to EKS?

My camera memory cards have suddenly switched from an EOS file to an EKS file and are no longer readable. I don't know if the problem is my computer, my card reader, my memory cards, or my camera. It doesn't seem probable that two cards would become corrupted or go bad at the same time. I have two large capacity cards and two new high capacity cards that I haven't tried yet, but I'm afraid to try to use any of my other cards until I know what is going on with these two. The camera I'm using a 5D Mark II. Can anyone please help! This is a serious problem for me!
Thank you to everyone for your help and assistance!
Best regards,
Windsails

Lightroom should recognize your camera (assume it's LR3 or later) automatically without pointing it to the DCIM directory. The files you are referring to is system file I think and not the photos; thus OS cannot read the file.
Do you have a card reader? For some reason, if you connect your camera into Lightroom directly, sometimes LR doesn't show the preview of your images. Instead you'll get ? next to a gray box. If you don't have a card reader, just plug your camera in, ignore the ? and the gray box (this is LR problem, not your camera), then import them anyway. You should see your test shot once it's done importing.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

Which memory cards can i use with my N95?

Hi!
I have just bought a new N95, and bought a memory sd card- transcend 2 GB, It works just fine to save music on it, but the camera doesn't work when the memorycard is in the slot..what is wrong? does it have to be a specific kind of memory card? How do I format it?

There are some wireless external hard drives that can be used with the iPad.
Best iPad External Hard Drive Storage Options
http://www.unlocktips.com/2012/11/best-ipad-mini-external-hard-drive-memory-stor age-options/
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
 Cheers, Tom

N73 with memory card

I have a few weeks a N73 with 2Gb of memory. Now it happens several times that the phone doesn't recognize the memory card anymore. Sometimes it will recognize it when I replace the card but sometimes I have to reboot the phone.
Does anyone have the same problem? What did you do with this?
I have also another problem. Sometimes during calling I hear suddenly a lot of noice and my caller cannot hear me anymore. It looks like a bug in the firmware. Does someone have the same problem? What did you do about it?
Kind regards,
Roland.

I dont know, but i bought a n73 and i also used it for a few weeks but now it doesnt recognize the memory card.
I cant find my Photos, music, and videos..
What should I do??
I hope theres someone that can help me...
3m

How can I transfer photos from a memory card to my compter with the hp 8600 ?

I can't transfer photos from my memory card to the computer. It only gives me the option to print them.

Do you have this printer connected through a network? (wireless or ethernet)
Is this computer you are using a Windows PC?
If so, try the steps in the thread located here.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

N81 8GB can there be another memory card working w...

....................................................i wanna know becuz i wanna buy a n81 8GB and thinking of putting another memory card? Is the 8GB hard drive or a memory card. And is there any Wi-Fi?And is the screen bigger than N72? And one of my friends is saying that there is a problem with the buttons(the numbers) like they are messed up and when he puts it in his pocket the button get pressed.
Nokia N72

the 8gig is internal memory (hard drive) and you don't have a slot for another memory card...only the new n96 has that accessibilty and it has 16 gig internal hard drive...the screen is quite big...and the keys are not a problem 4 me....

Is there a limit to size of SD card I can synch with a Mac?

Hi
I had a 2GB SD card that synched perfectly with desktop manager on my mac. I bought a 32GB card (having first checked my curve is compatible) but now my mac can't see an sd card (even though the phone can) - wondered if the Mac version of BB DM has a limit on size of SD cards it recognises?

I suggest you purchase a case and have a dedicated support engineer work with you directly:
http://www.sdn.sap.com/irj/boc/gettingstarted
Or
http://store.businessobjects.com/store/bobjects/Content/pbPage.CSC_map_countyselector/pgm.67024400?resid=jFmmLgoBAlcAAALO-iYAAAAP&rests=1278687224728
If this is a bug you'll get a refund, if not post your enhancement request in the Idea Place. Or the Rep will suggest a better way to create your report.

Could the MI client 7.1 work and synch with NW MI 7.0

if i have installed the MI client 7.1 on my windows mobile
can i synch this device with NW MI 7.0 or it is not compatible ????

Hi Ahmed,
no, this will not work. MI7.1 is a totally different architecture and protocoll then we had with MI7.0.
If you are in one version, you can sync against a newer release, lets say your client is MI7.0 SP 08 and your sever MI7.0 SP10, this works fine, but MI7.0 client with MI7.1 server or other way round will not work.
Sorry for that, but I hope it helps!
Regards,
Oliver

Do the SB X-FI cards work for anyone with Vista

I have one on the way and would like to know if I should return it and wait for a card that will work. My audigy 2 zs just wont make it. It seems I am hearing a lot of unhappy folks who have bought these cards. please advise.

Since this thread is hot right now maybe one of you can help me out with something that is slightly related. I just noticed this thread:http://forums.creative.com/creativel...essage.id=9273any of you have any experience with these "You-Pax" drivers? If so, do you know of any better download locations? This is not something I have to have, as I am happy with the current state of my X-FI functionality, but these modded drivers have me very curious.

How2 disable scrolling msg "you can insert memory card to print photos with no computer" on display

so a long time ago, I placed a call to hp and they told me how to disable the above message that kept scrolling across the printer display. a while back i had to restore printer to defaults and this message is back and hp can't tell me how to turn it off - all they want to do now is sell me a new printer. can anyone tell me how to disable the messsage??? TKS!!

Hello @W_T , and welcome to the HP Forums.
I have sent you a private message. If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Problem with LR5 Import on MAC, it always shows "file cannot be imported because it could not be read" This happens with file downloads from the memory card as well as with files from the hard drive. Happened out of the blue and I cannot figure out why. P

I need some instructions to solve this problem, has anyone had the same problems? We just got an imac and changed from windows to mac. At first LR worked perfectly, all of a sudden I cannot import pictures anymore. Please help!!

The destination directory, where Lightroom is trying to copy photos to, does not have WRITE permission. Change your permissions.

Union All with Linked Servers - Works until loaded on to the report server then fails.

Hi,
On our production server I have 2 linked servers. One that leads to ServiceNow via ODBC and one that leads to an HP Openview database.
Testing these linked servers works fine. I have a query that obtains info from each source and 'union all' together. When i run this query in SQL Server management studio it works fine and I get info from both data sources union-ed together perfectly.
I transfer this into Visual Studio and create a report, which again runs perfectly.
I upload this report to the report server and try to run it and get the error:
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'Dataset1'. (rsErrorExecutingCommand)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
When I rummage through the log files for the report server, I find very little helpful errors, basically this:
ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Query execution failed for dataset 'Dataset1'. ---> System.Data.SqlClient.SqlException: Cannot
execute the query.
I did a test where I created a copy of the report and ran only he Servicenow section of the report and it works, then ran only the HP section of the report and it works. It seems the UNION ALL is the problem somehow.
Anyone have any ideas??
Thanks
Kirsty

Hi Kirsty,
As you posted, this issue is caused by the security configuration of Linked Server.
Generally, in a domain environment, we can specify a domain account as the stored credentials for the report, and then configure the Linked Server to "Be made using the login’s current security context".
However,if we specify a SQL Server login as the stored credentials for the report, please set the Linked Server security to "By using this security context", and then providing the necessary credentials to authenticate at the linked server.
Please also add the Reporting Services Security role to the Linked Server Remote Server Login Mappings.
For more information about Creating Linked Servers, please refer to
http://msdn.microsoft.com/en-us/library/ff772782.aspx
About Security for Linked Servers, please refer to
http://msdn.microsoft.com/en-us/library/ms175537.aspx
Regards,
Swallow

HT1657 why do when i watch a movie with subtitles it doesn't synchs with what people in the movie are saying?

hi

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Pearl with memory card works until synch with desktop mgr

Similar Messages

Maybe you are looking for