Peculiar error from WLC and LWAP locking out iPhone 6+

WiFi LAN:
WLC Cisco 2504 Software Version 8.0.100.6
LWAP's Cisco 1702i's Software Version IOS 15.3 Mini IOS 8.0.72.236
Single WLAN using WPA2 (AuthPSK)
Apple iPhone 6+ Software Version 8.1.2
The error being reported in the 2504 WLC Message Log is:
"*sntpReceiveTask: Jan 21 10:59:27.457: #LWAPP -3-DUP_IP:spam_Irad.c:39857 The system has added client a8:8e:24:60:a0:52 to exclusion list due to IP Address conflict of AP 192.168.10.10, this is a duplicate of IP on another machine (MAC a8:8e:24:60:a0:52)"
In the error above:
a8:8e:24:60:a0:52  - Is the Smart Phone being locked out of the LAN.
192.168.10.10 - Is the IP address of the LWAP where the problem started yesterday.
To troubleshoot, I took the smartphone to another LWAP 100 meters away and the above error still gets reported to the 2504 WLC.
My questions to the support community:
1) I have looked everywhere for this "Exclusion List" on the 2504 WLC GUI and cannot fine it. Does it exist on the 2504 GUI? CLI?
2) If not, is it on the LWAP?
My thinking is to clear this list to see if this smartphone can then join the LAN.  THX

Thanks for that Scott. I will do the updates when a window opens up. I performed the opened SSID as you suggested and the smartphone would not join on the first attempt. On the second attempt I manually entered network settings and it finally joined and has held for over an hour now. I have 2 iPhone 6 smartphones with this problem now and 45 mixed iPhone 6's/Droids running flawlessly with WPA2/AES Security. I will attach a couple screenshots of the security setup to this post. 
On another note, I had originally though that this was an Apple IOS 8 issue as I found a recent thread on the Apple Support Communities mentioning the same issue of continuous re-logging in.
https://discussions.apple.com/thread/6536955

Similar Messages

  • Upgraded to ML from L and am locked out, will not accept password

    just upgraded to ML form L and am locked out, won't accept my password....i cant use my laptop now, what can i do?

    I haven't tried this process in ML but I don't think it's changed from L.
    http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/

  • Preview - crop error after saving, and field lock-out

    Filling out PDF's of my taxes, I get two consistent errors:
    1. When I try to save my work, it crops the page, leaving white space to the left and below, and cutting off the page to the right and above
    2. I loose the pre-set fields, and can no longer fill in the form.
    Is there any way to avoid this in preview, or do I just need to use another program (Illustrator, or Acrobat...and if Acrobat, is reader adequate, or do I need the full program?)

    Welcome to Discussions!
    You should use Adobe Acrobat Reader. For this type of .pdf, Reader is sufficient.
    I tried out a 1040EZ and got the same result as you in Preview.
    PDF forms aren't as portable as they pretend to be. Sometimes they don't play nice with Preview.

  • I purchased a book from itunes and cannot figure out how to get it on my ipod nano 7.  I cannot find an answer that works.

    I purchased an audio book from itunes and cannot figure out how to get it on my nano 7.  I have tried everything. 

    Have you double checked to make sure these Audiobooks are configured to sync to your iPod from under the iPod's Books configuration tab in iTunes?  This is assuming that the audiobooks are already stored in your iTunes library and appear under the Books category.
    To access this configuration tab, plug in your iPod and select it from under the Devices section in the left hand pane of iTunes to bring yourself to the iPod's Summary tab. Now locate the Books tab across the top in the main iTunes window and select it. Here you can configure what and how audiobooks are synced to the device.
    If you make any changes to this tab, make sure to hit the Apply button on in the lower right hand corner. This will sync the updated changes to your device.
    B-rock

  • Help! My new iPhone is asking for a password but I never set one and am locked out - what can I do?!?!

    help!!! My new phone is asking for a password but I never set one and am locked out - what can I do?!?!

    Is it asking for your Apple ID password or the passcode to unlock the phone?
    If it's asking for your passode, use the steps in this article: http://support.apple.com/kb/ht1212

  • Trying to publish to my BC from Muse and it times out.

    I've been tryng to publish a simple page to BC from muse and it times out, the manage BC under file is greyed out. 
    Don't know what else to do???

    Can we reopen this issue please.
    I've been getting the same message. Applied the above instructions but still get same messaging.
    Here are the screenshots  (NOTE - T & C for Trial Software)
    I've also deleted Muse from the computer and reloaded it through my Creative Cloud account.
    Thanks for your help.

  • IPv6 for management and control plane on WLCs and LWAPs

    Good morning, everybody!
    I am trying to find answer to a question that has been previously asked by people but never successfully answered
    The question is about IPv6 support on Cisco Wireless LAN Controllers and access points... Does Cisco have a roadmap to include support for IPv6 used in CAPWAP, control plane and management? There are couple of posts on this topic that do not unfortunately provide any answer to this point.
    https://supportforums.cisco.com/message/3018843
    https://supportforums.cisco.com/docs/DOC-15667
    Infamous "Cisco IPv6 Solution" at http://www.cisco.com/en/US/partner/technologies/collateral/tk648/tk872/tk373/technologies_white_paper_09186a00802219bc_ps6553_Products_White_Paper.html briefly states "Wireless Solutions... In future, IPv6 control plane features may get added to those components."
    Has anyone heard of any more specific roadmap for IPv6 support for CAPWAP, control plane and management on WLCs and LWAPs?

    Full ipv6 support will never be available on the Wism and 440x controllers because they have a NPU to forward traffic and it was not designed with ipv6 in mind.
    The 5508 and Wism2 and all new controllers all have CPU based forwarding and ipv6 is coming in next releases.
    WLC 8.0 is only for december 2011/2012 and I have to say I don't know if it will support native ipv6.
    my 2 cents

  • I forgot my lock on my ipod touch 3rd generation and im locked out.

    I dont remember my combination for the lock and im locked out. What do i do?

    There should be "This helped me" and "This solved my question" buttons at the bottom of each post in this thread. If you don't see these, perhaps this thread was marked as a discussion rather than a question. No need to worry about points

  • My iPhone is from Israel and was locked to Orange.  Now I'm in the UK and Orange here tell me it's locked exclusively to Orange in Israel.  Can an iPhone be unlocked from a country without getting re-locked each time an update is downloaded?

    My iPhone is from Israel and was locked to Orange.  Now I'm in the UK and Orange here tell me it's locked exclusively to Orange in Israel.  Can an iPhone be unlocked from a country without getting re-locked each time an update is downloaded?

    If the iphone is locked to Orange in Israel then only Orange in Israel can authorise Apple to release the lock .No one else
    However if you look here Orange in Israel appear not to lock iPhones they sell
    http://support.apple.com/kb/ht1937
    Poses several questions you might like to ponder ??

  • HT1688 i updated to iosv6 and got locked out help

    i updated to iosv6 and got locked out help

    HT1414 ipod touch is locked forgot password
    See if this helps. This helps for iPhone.

  • HT1212 I have an ipod 4 touch with a broken power button and Im locked out of the ipod. How can I reset the ipod? Please help!

    I have an ipod 4 touch with a broken power button and Im locked out of the ipod. How can I reset the ipod? Please help!
    I also don't know the operating system.

    See the method in my reply in this discussion for how to place the iPod in Recovery mode w/o buttons
    Turn on without Home/Power Button

  • How to let AP1262 download from WLC and been managed.

    Hi Friends,
    Some days ago, I download standard IOS image for 1262 and installed, now this 1262 AP can start up without WLC. but I don't know how to recovery this AP image, and let's startup / download the image from WLC and has been managed...
    Is that ONLY remove the existence image ? and it's will be auto find WLC ?
    Thanks.

    Okay... here are the steps:
    1. Install an external TFTP tool such as tftpd32 tool from http://tftpd32.jounin.net/
    2. Assign IP address in the range 10.0.0.2 - .254 ( Ex : 10.0.0.2) to the tftp server (your laptop or pc).
    3. Download the IOS to lwapp image onto the tftp's root directory. Use http://www.cisco.com
    The filename that you need to rename will show up when you are consoled into the AP
    4. Rename ap3g1-rcvk9w8-tar.124-23c.JA3.tar to ap3g1-rcvk9w8-tar.default
    5. Make sure you set the IP address on the BVI interface of the AP if not set. Set it in the 10.0.0.x range. Default is 10.0.0.1.
    6. Connect the Ethernet port on AP to your TFTP Server ( Laptop ) DISABLE YOUR FIREWALL
    7. Hold the mode button and power off the AP.
    8. Power back the AP while continually holding the mode button for 20
    seconds.

  • I was updating software i06 and plugged in my iphone to computer but then a error came up and I unplugged my iphone know it wont leave the the itunes and USB plug in on my iphone

    I was updating my iphone 5 for know software and when I plugged in my iphone everything was fine. Then a error came up and I unplugged my iphone. Know my phone froze with the screen showing itunes plug in with USB cord. I cant get it off that image and I don't know what to do

    Hello there Stmalo23,
    I would recommend reseting the iPhone using this procedure.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting http://support.apple.com/kb/ht1430
    When the reset is done the phone will return to recovery mode. Here is some info about recovery mode:
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808.
    All the very best,
    Sterling

  • I am from Brazil, and i have an iphone 5. Since it was purchased the 3G/4G data signal doesn't work. I made contact with people in Apple from Brazil and they told me I had to ask for your support to unlock the 3G/4G data signal.

    I am from Brazil, and i have an iphone 5. Since it was purchased the 3G/4G data signal doesn't work. I made contact with people in Apple from Brazil and they told me I had to ask for your support to unlock the 3G/4G data signal. How do I have to proceed to unlock this feature in my iphone?
    I would appreciate if you can help me.
    Thanks!

    Greetings alex.bonifacio! I'm very sorry that you're having connection problems with your iPhone 5. While would love to help in any way I can, the device must at least be on an active line of service with Verizon Wireless in order for me to be able to make any changes. I must therefore urge you to contact your local wireless carrier for your equipment options. Good luck and thanks!
    DionM_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • I am using iphone 4 and planning to visit india for few months. can i buy local sim card from india and use in my iphone? i have alrady unlock my iphone.

    I am using iphone 4 and planning to visit india for few months. can i buy local sim card from india and use in my iphone? i have alrady unlock my iphone.

    Of course

Maybe you are looking for

  • What is the best all-in-one printer out there today

    I have a home office.  I have been running either Canon or Epson printers for years.  My Canon MP830 is dying - I am getting a blac stripe down the middle of every paper.  I need a new all-in-one printer.  I want it to work wirelessly and the ink sho

  • Authenticating 1300 Bridges to WLSE Express

    I'm curious how I can authenticate my 1300 bridges as a client to a WLSE Express.. The WLSE Express does have a built in AAA server and i've created the usernames, but, i'm not sure where in the 1300 I can assign it to authenticate to the WLSE.. My q

  • .swf file in html page with WebLogic Server in Netscape

    I am not able to embed .swf (flash) files in html page when accessed thru' Weblogic server in Netscape Ver. 5 and below but supported in Netscape6.0 and IE. When run as html page without WebLogic server, it is working well. Please suggest a solution

  • Learn ABAP for HANA

    Hi I am interested in knowing more and learning about SAP HANA and ABAP for HANA. I found a few links on SDN, but am not sure where to start from. Is there any link where I can start learning about it from basics? Thanks

  • I would like to trial Lightroom6, but the standalone version, not CC. I cannot find this version to trial.

    Hi all, I would like to trial Lightroom6, but the standalone version, not CC. I cannot find this version to trial. For that matter, I cannot find the standalone upgrade version to buy! Please point me in the right sirection - thanks