Peculiar SLD
Hi SAP Community
I recently installed one of many BI NW2004s with ABAP + JAVA stacks, have an issue with SLD. The system is on SP 9. Perhaps I have overlooked something ?
Configured the SLD to its fullest, leaving no stone unturned, indeed SLDCHECK is showing all green, data bridges are actively sending information (both ABAP and JAVA) to the SLD, SLD is in running state. Can manually log into SLD no problem and can access SLD from PI.
However when I login into the Web Content Administrator, the Create JCo connection buttons are inactive, only Check SLD button is active, when I press this and then press test the SLD connection, it gives a red error line a the bottom of the page, can't remember the exact wording but somewhere along the lines of 'Connection to SLD could not be established'.
Further tested the CIM Client via VA using service DEPLOY, I get an error there aswell. Although all relevant Application Services are running in VA.
Have done trouble shooting following the SAP published magic flowchart, no luck there as everything is YES.
Any fresh thought you can offer ?
Cheers, Zapp
Zapp,
I think there is a problem in your SLD config
Also, check the post installation steps as below
There is a Post Installation guide for SLD. That will be available in the Help section of the SLD. You can use that as a reference.
However there are certain standard steps that you need to follow for configuring the SLD.
1. Make the object server settings in the SLD Administration. Start the server.
2. Import the content. There are two files that need to be imported those are CIM.zip and CR_Content.zip. This is using the Import link in the SLD Administration.
4. Create a technical system in SLD. This is under Home -> Technical Landscape -> New Technical system.
3. Log in to Visual Administrator. Under Server Services SLD Data Supplier click on the CIM Client Settings and give the server name user and password there.
Then you can go ahead and create the JCO Connections.
Also, check the following PDF Guide
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/sap%20system%20landscape%20directory%20on%20sap%20web%20as%20java%206.40.pdf
regards
krishna
Similar Messages
-
Setup NWA for XI landscape - error in CIM on SLD.
I am currently setting up the Netweaver Administrator (NWA)and have noticed a "peculiarity" between systems in the CIM landscape.
My landscape is made up of dev, qas and Prod (XI 3.0, oracle 9.2.0.6 windows 2003 cluster) . I have an app server and db server making up the cluster.
In the landscape, my Dev and prod systems point to app server, yet the test system points to the db server.
I have tried removing the entries and regenerating them, but they re-appear pointing to the db server.
The NWA reads and monitors java systems (from SLD), but it can't read my test server as it's not pointing the correct url....
Has anyone else come accross this? Or can anyone point me in the right direction???Hello Maddy
Check the links below. You need to complete the required configuration.
Configuring the CCMS Alert Monitor
http://help.sap.com/saphelp_nwpi71/helpdata/EN/e5/5d1741b393f26fe10000000a1550b0/content.htm
Adding a Monitored System to the NWA
http://help.sap.com/saphelp_nwpi71/helpdata/EN/45/4ff80607a945ace10000000a155369/content.htm
Regards
Mark -
WEB-AS JAVA type TS not removable from SLD
Hi Experts,
I have a peculiar issue where In I have a ECC 6.0 ( SID :- RD1) added in my SLD of PI 7.0 as WEB-AS ABAP Type Technical System.
I was able to work with the corresponding Business System in my ID( configuration). But two days back when I logged in to view my SLD , I could see that in my Technical System category there are two instances of RD1 one WEB-AS ABAP and other WEB-AS JAVA . Now I suppose WEB-AS JAVA type TS for RD1 was created by mistake. But now when I am removing it from the TS category and also removing the instances created under BCSystem and SAP JAVA cluster in content maintainence. I see the WEB-AS JAVA type TS appearing again in the TS after some time. I repeated the same several times and also start/stop the SLD server but then after sometime again the WEB-AS JAVA type TS for RD1( ECC 6.0 - not required) appearing in the list of TS.
I am unable to understand this absurd behaviour. I have carefully removed all the instances from the content maintainence but still it appears after sometime.
Are there any other possible places where there can be instance created for the WEB-AS JAVA type TS in SLD server where from I am supposed to remove it ???
Regards
NishantHi Nishant,
You question is little confusing
Case1. Are you saying : You made TS (Say XYZ) for ABAP part of an SAPECC system and next day you found a TS with the same name (XYZ) for the same SAPECC system, but the component was JAVA In short you have two TS one for each ABAP & Java Part of the same systems.
Case2 :1. Are you saying : You made TS (Say XYZ) for ABAP part of an SAPECC system and next day you found a TS with the some other name (ABC) for the same SAPECC system, but the component was JAVA In short you have a TS for each ABAP & Java Part of the same system. If this is the case then, how is this possible both cannot have same name
Regards
Suraj -
IR, RWB,SLD - Opening in English & ID in German
Dear all,
The XI Server which we are using has a peculiar problem.
IR, RWB, SLD and all other applications open in English, where as Integration Directory (ID) opens up in German.
What could be the problem here? Can anyone guide me with the step by step procedure to resolve this issue.
Thanks in advance,
YounusHi,
concact your basis admin people they will change the exchange profiler or do this thing
Go to xi home page->Administration->ExchangeProfile->IntegrationBuilder->IntegrationBuilder.Directory
Check the parameter com.sap.aii.directory.serviceuser.language.
regards,
Surya -
A Doubt in Creation of Tech. System for a BW Server in SLD
Hi Experts,
I want to access BI Queries in a BW System in VC 7.1.
When I am trying to create a New Technical System in SLD of CE 7.1 Server, it is giving me the options, to Select the System Types as
1. AS ABAP
2. AS Java
3. Standalone
4. Third Party
So, Whether we need to Select the System AS ABAP or we need to Install anyother thing to get a Systems Option as ABAP.
Also, I read in a SAP Note, That we have to define the System as AS SAP_BW.
Note: BI Kit is installed in my CE 7.1 Server
Please help me to solve this issue.
Thanks in Advance.
Regards,
PalaniHi Palani,
you don't need an SLD for configuring Bi connections. Please have a look at
http://help.sap.com/saphelp_nwce10/helpdata/en/7e/6dbcea3700452195e3bddaa47c5906/frameset.htm
how to define a BI connection for Visual Composer 7.1
Best regards
Hartmut -
Experts,
I have created a track to transport the XI content.
We have two SLD servers in the landscape. The first is used by XI and contains all the required XI business systems and the second is used only by NWDI and contains only the SC definitions.
My question-
DOes the SLD for NWDI need XI system details???? According to my understanding, NWDI needs only the component information from the SLD.
Bascially, do i need to import the business system data into the SLD that is being used by NWDI???
thanks,
VineethDid a little research and found that the SC information is sufficient for NWDI.
-
Logical system name in business system (SLD)
Hi,
While creating business system in SLD what should give for the logical system name?
Should the logical system name exists in ABAP stack or the new one?
Thanks.Hi,
If you are creating the BS for SAP R/3 in SLD means we have to give the LS name which we had in SAP R/3( goto SALE and take the LS from there)
Goto Assign LS-----take the client which you are using for SAP R/3 and take the LS name assigned to that Client
Regards
Seshagiri -
Problem with business systems in SLD
Hey guys
i m doing a IDOC to file scenario and m creating two business systems in SLD
the first one uses the logical system name of the R/3 server and has been configured as WAS ABAP.
when i try to create the second one as a third party using the logical system name i defined in BD54(on R/3 server),i get the error sayin that a business system already exist with the logical system name.
i do have one businees system which is using the same logical system but that has been configured as WAS ABAP.
cant i assign two different business names to same logical systems?
thanx
ahmad
Message was edited by:
AhmadHey
thanx ,now when i try to use the same business system name for the R/3 server in the second scenaario,i dont see the business system in ID,i did cache refresh,
also just want to make sure
i have configured my SLD as under for the first scenario
created two business system,first one is using the logical system name of the R/3 server configured as WAS ABAP and the second one is configured as third paarty and using the logical system name created in BD54.
do these setting looks good to u?
now can i use both these business system in my second IDOC to File scenariio?
thanx
ahmad -
How to create Business Services in SLD
Hi Experts,
I'm working on SAP background and wanted to learn SAP-XI.
I'm interesting to work in XI and for this need your support.
I installed XI in my PC and wanted to start learning.
But there are no Business Services (or) Systems configured in the SLD.
I want to start with a simple FILE to FILE scenario.
Could anyone please tell me how to create services in SLD and carry on from there.
Thanks,
PrajwalHi,
please look at the bleow links
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/4013f6bb-7ec3-2b10-62b5-e5be01e498f7
Blogs
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i - Step by Step Guide: XML File 2 XML File Scenario: Part I
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-ii - Step by Step Guide: XML File 2 XML File Scenario: Part 2
Regards,
Pradeep A.
Edited by: Pradeep Amisagadda on Apr 16, 2010 9:39 AM -
Setting Business Systems in SLD
Hi,
In our SLD, we have two different Business Systems associated with the same ABAP Technical System and same client too. One BS is related to one Integration Server (XI) -this BS was imported in SLD- whereas another BS is related to another one (PI).
When we run a soap interface in XI, we see the request reaches the correct BS (XI BS). However, the response is sent by the PI BS through the XI interface, getting an error.
We need to have both Business Systems due to we are using the same SLD for XI and PI.
Any idea?
Thanks in advance,
Samantha.Hi Luqman,
Their names are different. Each BS is related to a different Integration Server, but their ABAP TS and client are equal.
XI interfaces should use the XI BS, whereas PI interfaces should the PI BS, but this is not so.
Is there any option that selects by default a particular BS in SLD when both BS using the same TS?
Thanks,
Samantha. -
PI 7.11 Post Installation - Template initial SLD configuration ERROR
Hi All,
I was installed SAP PI 7.11 on Widows2003 with Max DB and when i am trying to run the initial SLD confuguration Template we are getting error at 70% as below. An the same ii have tried in different Browsers lke IE8.0, IE6.0 and Firefox
During the configuration Step: SAP BASIS Product and component.
ERROR: CIM_ERR_FAILED: HTTP Response Code: 400 Bad Request.
And i am posting the default trace log.
"Severity","Date","Time","Message","Category","Location","Application",
"Error","2010-12-08","16:43:45:296","Warning: validation was turned on but an org.xml.sax.ErrorHandler was not set, which is probably not what is desired. Parser will use a default ErrorHandler to print the first 10 errors. Please call the setErrorHandler method to fix this.","System.err","System.err","sap.com/tclmitsamuimainframe~wd",
"Error","2010-12-08","16:43:45:296","Error: URI = 'null', Line = '2', : Document is invalid: no grammar found.","System.err","System.err","sap.com/tclmitsamuimainframe~wd",
"Error","2010-12-08","16:43:45:296","Error: URI = 'null', Line = '2', : Document root element 'wsdl:definitions', must match DOCTYPE root 'null'.","System.err","System.err","sap.com/tclmitsamuimainframe~wd",
"Error","2010-12-08","16:43:45:625","Unexpected exception catched and will be rethrown:","com.sap.ctc.util.pi.services.SystemLandscapeSetup","com.sap.ctc.util.pi.services.SystemLandscapeSetup.maintainInstalledProduct(String productName, String productVersionName, String vendor, String version, String[] componentNames, String componentVersion, String hostName, String systemName)","sap.com/tclmitsamuimainframe~wd",
"","","","com.sap.sld.api.wbem.exception.CIMCommunicationException: CIM_ERR_FAILED: HTTP response code: 400 Bad Request","","","",
"","","","[EXCEPTION]","","","",
"","","","com.sap.sld.api.wbem.exception.CIMCommunicationException: CIM_ERR_FAILED: HTTP response code: 400 Bad Request","","","",
"","","","at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.newCommunicationException(WBEMHttpRequestSender.java:511)","","","",
"","","","at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.processResponse(WBEMHttpRequestSender.java:400)","","","",
"","","","at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.sendImpl(WBEMHttpRequestSender.java:206)","","","",
"","","","at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.retryOnUnsupportedMediaType(WBEMHttpRequestSender.java:585)","","","",
"","","","at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.processResponse(WBEMHttpRequestSender.java:396)","","","",
"","","","at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.sendImpl(WBEMHttpRequestSender.java:206)","","","",
"","","","at com.sap.sld.api.wbem.client.WBEMRequestSender.send(WBEMRequestSender.java:205)","","","",
"","","","at com.sap.sld.api.wbem.client.WBEMRequestSender.send(WBEMRequestSender.java:175)","","","",
"","","","at com.sap.sld.api.wbem.client.WBEMRequestSender.send(WBEMRequestSender.java:238)","","","",
"","","","at com.sap.sld.api.wbem.client.WBEMRequestSender.send(WBEMRequestSender.java:268)","","","",
"","","","at com.sap.sld.api.wbem.client.WBEMRemoteClient.sendAndCast(WBEMRemoteClient.java:936)","","","",
"","","","at com.sap.sld.api.wbem.client.WBEMRemoteClient.enumerateInstanceNamesImpl(WBEMRemoteClient.java:463)","","","",
"","","","at com.sap.sld.api.wbem.client.WBEMAbstractClient.enumerateInstanceNames(WBEMAbstractClient.java:480)","","","",
"","","","at com.sap.sld.api.std.impl.BaseSystem.getAllInstances(BaseSystem.java:312)","","","",
"","","","at com.sap.sld.api.std.tech.SLD_ABAPSystem.getABAPSystem(SLD_ABAPSystem.java:661)","","","",
"","","","at com.sap.ctc.util.pi.services.SystemLandscapeSetup.maintainInstalledProduct(SystemLandscapeSetup.java:280)","","","",
"","","","at com.sap.ctc.util.pi.services.SystemLandscapeSetup.maintainInstalledProduct(SystemLandscapeSetup.java:1479)","","","",
"","","","at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)","","","",
"","","","at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)","","","",
"","","","at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)","","","",
"","","","at java.lang.reflect.Method.invoke(Method.java:585)","","","",
"","","","at com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaMethodExecuter.invoke(JavaMethodExecuter.java:221)","","","",
"","","","at com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceExecuter.executeService(JavaServiceExecuter.java:98)","","","",
"","","","at com.sap.tc.lm.ctc.cul.broker.BrokerServiceExecuter.executeService(BrokerServiceExecuter.java:54)","","","",
"","","","at com.sap.tc.lm.ctc.cul.serviceimpl.executor.CULServiceExecutor.executeService(CULServiceExecutor.java:51)","","","",
"","","","at com.sap.tc.lm.ctc.cul.serviceimpl.process.InvokeServiceControllerDefault.execute(InvokeServiceControllerDefault.java:170)","","","",
"","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
"","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
"","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
"","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
"","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
"","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
"","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
"","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessExecuter.run(ProcessExecuter.java:158)","","","",
"","","","at java.lang.Thread.run(Thread.java:725)","","","",
"Error","2010-12-
"Error","2010-12-08","16:43:45:625","","com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaMethodExecuter","com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaMethodExecuter","sap.com/tclmitsamuimainframe~wd",
"Error","2010-12-08","16:43:45:625","Service execution error. Invocation target error when call method maintainInstalledProduct in class com.sap.ctc.util.pi.services.SystemLandscapeSetup of component sap.com/com.sap.xi.ctc.app (error message = CIM_ERR_FAILED: HTTP response code: 400 Bad Request)","com.sap.tc.lm.ctc.cul.serviceimpl.process.InvokeServiceControllerDefault","com.sap.tc.lm.ctc.cul.serviceimpl.process.InvokeServiceControllerDefault","sap.com/tclmitsamuimainframe~wd",
"","","","[EXCEPTION]","","","",
"","","","com.sap.tc.lm.ctc.cul.api.CULServiceException: Service execution error. Invocation target error when call method maintainInstalledProduct in class com.sap.ctc.util.pi.services.SystemLandscapeSetup of component sap.com/com.sap.xi.ctc.app (error message = CIM_ERR_FAILED: HTTP response code: 400 Bad Request)","","","",
"","","","at com.sap.tc.lm.ctc.cul.broker.BrokerServiceExecuter.executeService(BrokerServiceExecuter.java:56)","","","",
"","","","at com.sap.tc.lm.ctc.cul.serviceimpl.executor.CULServiceExecutor.executeService(CULServiceExecutor.java:51)","","","",
"","","","at com.sap.tc.lm.ctc.cul.serviceimpl.process.InvokeServiceControllerDefault.execute(InvokeServiceControllerDefault.java:170)","","","",
"","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
"","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
"","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
"","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
"","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
"","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
"","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
"","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessExecuter.run(ProcessExecuter.java:158)","","","",
"","","","at java.lang.Thread.run(Thread.java:725)","","","",
"","","","Caused by: com.sap.tc.lm.ctc.provider.javaServiceProvider.exceptions.CPIServiceExecutionException: Service execution error. Invocation target error when call method maintainInstalledProduct in class com.sap.ctc.util.pi.services.SystemLandscapeSetup of component sap.com/com.sap.xi.ctc.app (error message = CIM_ERR_FAILED: HTTP response code: 400 Bad Request)","","","",
"","","","at com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaMethodExecuter.invoke(JavaMethodExecuter.java:255)","","","",
"","","","at com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceExecuter.executeService(JavaServiceExecuter.java:98)","","","",
"","","","at com.sap.tc.lm.ctc.cul.broker.BrokerServiceExecuter.executeService(BrokerServiceExecuter.java:54)","","","",
"","","","... 11 more","","","",
"","","","Caused by: java.lang.reflect.InvocationTargetException","","","",
"","","","at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)","","","",
"","","","at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)","","","",
"","","","at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)","","","",
"","","","at java.lang.reflect.Method.invoke(Method.java:585)","","","",
"","","","at com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaMethodExecuter.invoke(JavaMethodExecuter.java:221)","","","",
"","","","... 13 more","","","",
"","","","Caused by: com.sap.sld.api.wbem.exception.CIMCommunicationException: CIM_ERR_FAILED: HTTP response code: 400 Bad Request","","","",
"","","","at com.sap.ctc.util.infra.BaseConfig.dispatchException(BaseConfig.java:242)","","","",
"","","","at com.sap.ctc.util.pi.services.SystemLandscapeSetup.maintainInstalledProduct(SystemLandscapeSetup.java:361)","","","",
"","","","at com.sap.ctc.util.pi.services.SystemLandscapeSetup.maintainInstalledProduct(SystemLandscapeSetup.java:1479)","","","",
"","","","... 18 more","","","",
"","","","Caused by: com.sap.sld.api.wbem.exception.CIMCommunicationException: CIM_ERR_FAILED: HTTP response code: 400 Bad Request","","","",
"","","","at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.newCommunicationException(WBEMHttpRequestSender.java:511)","","","",
"","","","at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.processResponse(WBEMHttpRequestSender.java:400)","","","",
"","","","at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.sendImpl(WBEMHttpRequestSender.java:206)","","","",
"","","","at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.retryOnUnsupportedMediaType(WBEMHttpRequestSender.java:585)","","","",
"","","","at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.processResponse(WBEMHttpRequestSender.java:396)","","","",
"","","","at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.sendImpl(WBEMHttpRequestSender.java:206)","","","",
"","","","at com.sap.sld.api.wbem.client.WBEMRequestSender.send(WBEMRequestSender.java:205)","","","",
"","","","at com.sap.sld.api.wbem.client.WBEMRequestSender.send(WBEMRequestSender.java:175)","","","",
"","","","at com.sap.sld.api.wbem.client.WBEMRequestSender.send(WBEMRequestSender.java:238)","","","",
"","","","at com.sap.sld.api.wbem.client.WBEMRequestSender.send(WBEMRequestSender.java:268)","","","",
"","","","at com.sap.sld.api.wbem.client.WBEMRemoteClient.sendAndCast(WBEMRemoteClient.java:936)","","","",
"","","","at com.sap.sld.api.wbem.client.WBEMRemoteClient.enumerateInstanceNamesImpl(WBEMRemoteClient.java:463)","","","",
"","","","at com.sap.sld.api.wbem.client.WBEMAbstractClient.enumerateInstanceNames(WBEMAbstractClient.java:480)","","","",
"","","","at com.sap.sld.api.std.impl.BaseSystem.getAllInstances(BaseSystem.java:312)","","","",
"","","","at com.sap.sld.api.std.tech.SLD_ABAPSystem.getABAPSystem(SLD_ABAPSystem.java:661)","","","",
"","","","at com.sap.ctc.util.pi.services.SystemLandscapeSetup.maintainInstalledProduct(SystemLandscapeSetup.java:280)","","","",
"","","","... 19 more","","","",
"Error","2010-12-08","16:43:45:625","","com.sap.tc.lm.ctc.cul.serviceimpl.process.InvokeServiceControllerDefault","com.sap.tc.lm.ctc.cul.serviceimpl.process.InvokeServiceControllerDefault","sap.com/tclmitsamuimainframe~wd",
Thanks & Regards,
Sreekanthwe have installed PI7.11 agian
thanks -
PI 7.11 sp5 post install steps - SLD update hangs in IE browser
Hello gurus,
This is my first shot at installing PI ever. We decided to go with PI 7.1 EHP1 and SP5. I think the latest may be SP6.
At any rate, we're doing this on AIX 6.1 and Oracle 10.2.0.4.
I followed the install Guide exactly. Did the sapinst, oracle and patch. Next, I manually updated the KERNEL, IGS , JVM, Then I updated SPAM, SAP_BASIS, then all the other abap components. Then did JSPM and all those components. Everything matches SP5 for PI 7.11
https://websmp204.sap-ag.de/maintenanceNWPI71
SAP_ABA 711 0005 SAPKA71105
SAP_BASIS 711 0005 SAPKB71105
PI_BASIS 711 0005 SAPK-71105INPIBASIS
ST-PI 2008_1_710 0003 SAPKITLRE3
SAP_BW 711 0005 SAPKW71105
ST-A/PI 01M_BCO710 0001 SAPKITAB8F
Now I'm doing the post install steps that are in the instguide. THere are tons of steps, but let me go over the big ones and where I'm having a problem:
READ ALL THESE NOTES:
Note 1309239 - Configuration Wizard: PI NetWeaver initial setup
Note 1286149 - Configuration Wizard: PI Self Test for NetWeaver
Note 1107808 - Collective Note: Configuration Wizard 7.1
Note 1286428 - Configuration Wizard: PI Wizard Templates overview
Note 1115280 - PI CTC: Running SAP NW for PI in a different client
At this point, based on being at PI 7.11 and SP5, I did the client copy. from 000 SAP_UCUS to my new 400 client. Then I did 001 SAP_USER to my new 400 client.
Then I followed the steps to link the java UME from 001 to 400. No problem after restarted SAP, it goes to 400.
Now, the next step as I see it is to run the initial config wizard out of NWA. I did that, no errors.
My problem is when I get to updating the SLD. I started at cimsap 1.5.42 and CRDelta 5.0....
I updated cimsap to the cimsap51509_1-20005942.zip which took me to 1.6.9
Next, I tried to import CRDelta51509_1-20005942.ZIP. I "browse" to find it during the import, but when I click the "IMPORT" button, my browser hangs...
I don't even get to the next page where it would be one more "warning/info" before I could really start the import.
I didn't find anything in the work directory or the cluster/server0/log directory.
I search all through SDN/OSS but could not find anyone who had this problem.
Where did I mess up? Are there other config wizards I should have run before I tried to update the SLD?
--NICKHey Caio,
Thanks for the response but it doesn't actually answer my question. But to that point, for a "basic" PI post install, which of the NWA config tasks would you run other than the "initial config" ? And would you run them BEFORE you updated the SLD content (cimsap/CRDelta) ?
NW: PI - AS ABAP (Basic Configuration for Idoc, Proxy): Maintain
PI Adapter Engine in JPR Mode
PI Demo Client
PI Full Qualified Host Name
PI Self Test for NetWeaver
PI SLD Self Registration
Specifically, I did the SAPINST - ABAP/JAVA patches - Client copy - and THEN the initial config wizard (Setup a new local SLD, ). Also, during the initial config, I clicked the box marked "This SLD will be used as a name server for development" and my PI server hostname was already in the box marked "object server name". This config took about 30 minutes. I didn't see any errors or warnings. although I didn't view the log. I did go into Java JEE services and Filter for Services with name "XPI". All were green.
THEN I tried to update the SLD content.
any thoughts appreciated.
NICK -
How to push System-Data to the SLD ? NWA 7.11
How can i push the data from a J2EE-system to the SLD that is connected/configured in the NWA (Destinations) ?
In older versions of NWA there's being a 'collect and send'-button...
best regards
Christoph
Edited by: Christoph Bastian on Aug 17, 2011 3:46 PMHi,
Perhaps this link could help:
http://help.sap.com/saphelp_nwce711/helpdata/en/48/b6847d96655295e10000000a42189b/frameset.htm
The SLD_DataSupplier and SLD_Client destinations should be set in NWA -> Configuration Management -> Security Management -> Destinations
Next under Configuration Management -> Infrastructure Management -> SLD Data Supplier Configuration. Collect and Send exists to send the data to SLD.
Regards,
Srikishan -
<b>CIM_ERR_ALREADY_EXISTS: Instance already exists: SAP_BCSystem.CreationClassName="SAP_BCSystem",Name="BRP.SystemNumber.0020270914.SystemHome.sapprddb"</b>
Before I defined R/3 system in XI SLD wrongly, after that I delete from Business and technical , after that I start new definition.And It gave me error above.
I think some data must be deleted related with the previous definition.
How can I correct this error?
ThanksThere was a BRP system in Class: BC System. I removed it.
And I tryed to add BRP system (technical landscape). It gave me error belowe:
<b>500 Internal Server Error</b>
Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
<b>java.lang.IllegalArgumentException: The node, node element, and attribute info MUST NOT be null</b> -
My SLD is configured in SOLMAN sys, How can I connect it with SAP PI system
Dear Friends
My Basis has configured SLD in Solman, Now I cant use SXMB_IFR tcode in my PI that suggest me some error. saying "error in connection cant read secure connection config" or something like that. Plus SLDCHECK tcode is also not happy. it suggest that RFC connections are missing.
It is clear that My SLD is not linked with PI system. something is missing in technical system part and its not even bridged. but since I am not a BASIS guy I dont know How can I configure it. Not even my BASIS guy understands that I need to bring SOLMAN SLD to PI.
Can anyone suggests me How can I bring my SOLMAN SLD to PI system so I can run SXMB_IFR tcode ? I need to create some rfc connection like LCRSAPRFC and SAPSLDAPI but dont know the connection type like t, or something else. Please englight me by suggesting How can I bring my SOLMAN SLD to PI.
One intresting observation is when I try to run my SLD over url using PI system as host it comes but says SLD is not configured properly and when I did the same practice with SOLMAN host it works fine and I didnt receive any error.
Please reply me. your any help will be appreciated greatly.
Regards
NaeemHi,
Preferebly PI should have it's own SLD. And SOLMAN could use PI's SLD.
Please check Installation guide and SLD Administration Guide from Service Market place before finalizing SLD architecture in your System landscape.
I guess SOLMAN will have only one Instance in system landscape. (Not three system landscape like Dev, Qa, Prod).
If you want to go ahead with your current SLD plan, then Change your SLD hostname in Exchange Profile of PI, to SOLMAN Host name.
Regards
Praveen K
Edited by: Praveen Kurni on Jul 7, 2011 6:12 PM
Maybe you are looking for
-
ORA-06502: PL/SQL: numeric or value error: character string buffer too smal
Hi Guys I am getting error ORA-06502: PL/SQL: numeric or value error: character string buffer too small as it said i thought it would be issue with length of feild but i tried to change is nothihg work i am posing code here if any one can please help
-
Creation of flat data in Adapter Module
Hello, I'm writing an Adapter Module that supposed to convert XML source to a flat output (similar to StrictXml2PlainBean). But I'm not sure how to set the new flat content to the Message object that I'm getting from ModuleData supplied to process me
-
Can Powerbook connect to sony LCD flat panel fo simultaneous display?
I want to buy the Sony KDL-52XBR2 LCD flat panel and connect my Powerbook G4 using an HDMI or HD-15 Pin cable for simultaneous display. While the TV specs say it will allow a PC to connect and display, I have had trouble in the past with Mac/tv conne
-
Problem re installing printhead after cleaning
-
Harman Kardon Drive+Play iPod controller Installation
Here is the full series for the Drive+Play iPod installation: FirstLook: http://www.rainydaymagazine.com/RDM2005/Workshops/Garage/RDG_DriveNPlayFirstLook .htm BenchTest: http://www.rainydaymagazine.com/RDM2005/Workshops/Garage/RDG_DriveNPlayTestPlace