Pedalboard - no way to save settings

Whenever I try out something new, I always check to see if there's a way to save settings once I've been fiddling around and find something I like.
I have been looking at Pedalboard and read about Import mode, where one can load settings for stompboxes.
But.... (*BIG BUT.....*)...I don't see any way to SAVE settings for individual stompboxes. Sure - you can save and load settings for the entire board, but what if you find a great setting for Heavenly Chorus and want to bring that into an existing Pedalboard setup? No way that I can see....
There also doesn't seem to be a way to even load settings for a specific stompbox. You can only load settings from categories (eg Fuzz/Reverb) which then load a stompbox with that setting.
Please tell me if I'm missing something. If not, this goes straight to Feature Requests...

Okay, I got some great advice from Orren and Per at Logic Users Group:
+Think of it this way:+
+Everything inside Pedalboard is one plug-in. It's not multiple plug-ins inside one plug-in shell. So what looks like "saving one stompbox" would really be like "saving just the pre-delay parameter" in a chorus.+
+This is where Import mode comes in. You can save settings for the Pedalboard plug-in, and with Import, you can Import the settings for a single plug-in at a time. So if you're playing around with a pedalboard and find a great setting for Heavenly Chorus, save the setting as "Heavenly Chorus" and then you can use Import mode to import just the Heavenly Chorus settings into another Pedalboard.+
and
+Do a Save As just as with any other Logic plug-in. Your unique Heavenly Chorus stompbox setting will be part of the saved plug-in setting. So from any other Pedalboard preset, that includes Heavenly Chorus, you may import that specific Heavenly Chorus setting.+
Great advice - problem solved....

Similar Messages

After updating to Yosemite, my screen saver settings are not maintained. The screen saver reverts to some Apple default. There is no way to get my setting to be maintained.

After updating to Yosemite, my screen saver settings are not maintained. The screen saver reverts to some Apple default. There is no way to get my setting to be maintained.

Hi ..
Might be corrupted preferences.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.screensaver.plist
Click Go then move the com.apple.screensaver.plist file to the Trash.
Restart your Mac then reset your screen saver.

Is there a way to save Publish Settings?

I had a machine crash. My data files and LRCAT are stored on a separate drive so after reloading all the software I just pointed to my current LRCat. I found out that the publish settings are not stored in the catalog (seems like a smart place to keep them).
Is there any way to save these settings? Or other settings like import/export user settings and the like?
Thanks

Publish settings are stored in preferences (.agprefs file).
Export presets are stored in .lrtemplate files.
Both are in subfolders of Lightroom "app data" folder.
Consider running Aux Backup for a complete list of all auxiliary Lr files (includes all critical data files except catalog and photos).
Rob

Our workspace settings disappeared last week on several of our workstatations (Mac) - is there a way to save them locally?

Our workspace settings disappeared last week on several of our workstatations (Mac) - is there a way to save them locally?
Thanks,
Tolbert

I'm not sure what you mean by "the import doesn't work." If you're trying to use File>Import, that's for importing content or FCP XML; it definitely will not work for something like a workspace XML.
If there's a way to import a workspace, like there is for export presets, I'm not aware of it. I can think of two options, however:
manually copy the workspace XMLs to the folder I cited above (or, if your Documents folder redirects elsewhere, then in the Layouts folder at that location)
in Workspace submenu under Window, make sure the option "Import Workspace from Projects" is enabled, and then load a project that uses a workspace that you want to share.

No way to save Audio Track Mixer or Audio Plugin Settings?!

Am I stupid, or is there really no way to save my Audio Track Mixer setup, NOR a way to create my own presets for Audio Track Effects???
I spent a lot of time setting up the Track Mixer, with submix tracks, lots of effects on different tracks, etc.
The ONLY way I've found to use this setup again is to duplicate the sequence. Which is a PITA when it's a new project, and I have to dig it up from an old project with the (annoyingly slow) Media Browser ... or create a "template" project.
And what about settings for plugins??? Like the "Mastering" plugin ... the built in presets are pretty useless ... is there no way to copy the settings from one sequence to another? Or create my own presets?

Am I stupid?
Heavens, no.
...is there really no way to save my Audio Track Mixer setup, NOR a way to create my own presets for Audio Track Effects???
Nope.
I do what you do... duplicate Sequences.
You can file a feature request here:
http://www.adobe.com/go/wish

Logviewer settings: is there a way to save?

Hello,
We have a NW04 installation on a server we use for development. We use the logviewer and admin tool locally (and connect with them to the remote server).
As there are many of us developing on the server, we find it very helpful to filter the logs (we have several filters - I have about 5 defined).
The question is:
Is there any way to save the defined filters? (so that every time I start the logviewer I have the previously defined filters available).
Thank you,
Silviu Lipovan Oanca.
p.s. please let me know if I am in the wrong place with this topic. I did not know exactly where to post it.

Silviu,
I have the same question. Did you ever get an answer or figure out how to do this?
Thanks!

I purchased some movies off iTunes from my account from my fathers IPad as a gift but didn't realize can not view if not logged with my account. Is there any way to save directly to the IPad (regardless of account)? Or transfer to him so he can view have?

I purchased some movies off iTunes from my account (but from my father IPad) to download as a gift,
but didn't realize he can not view if not logged in with my account.
Is there any way to save directly to the IPad (regardless of account) so he can view?
Or transfer to his account?
Or is any was to cancel the recent purchase if can not transfer as I will not watch these myself?

sure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde

I usually have 3-4 tabs open which I am saving to read later. But I loose them all the time when firefox crashes or when another appliaction opens firefox to download. Is there a way to save my tabs ?

I usually have 3-4 tabs open which I am saving to read later. But I loose them all the time when firefox crashes or when another appliaction opens firefox to download something and it will discard all my tabs. This is incredibly annoying, is there a way to save my tabs ? or get them back when there is no "restore session" button ?

In Firefox Options / Privacy be sure "Remember download history" is checked. To see all of the options on that panel, "Firefox will" must be set to "Use custom settings for history".
To find your OS information, on your Windows desktop, right-click the My Computer icon, choose Properties, under System on that small window is info about your OS.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Adobe Camera Raw Save Settings and Lens Profile Corrections Help

I have been fooling around with Adobe Camera Raw’s (ACR) ability to save settings so that I can apply them to other images. I’m able to set things such as clarity, vibrance, camera profile etc. What I want to do is enable Lens Profile Corrections and have it automatically detect the lens information for future images, apply no distortion corrections and apply vignetting and chromatic aberration corrections. However, when I try this, the Lens profile sticks on “Canon EF 24-105mm f/4 L IS USM” (which is what I used for creating the settings to be saved) regardless of the lens used for the image that I am applying the settings to. Is there a way do this?
I’m using Photoshop CS6 and ACR current version.
Thanks,
Mike

You should see an Adobe Standard profile and perhaps an ACR x.x profile for your camera, but Adobe does not make Camera-centric profiles (landscape, portrait, camera neutral, etc) for most cameras unless they are Canon DSLRs, Nikon DSLRs, one Leica and a few Pentax cameras.
On a Vista/Win7 system you can verify what models of cameras are supported by Adobe by looking for profiles in:
C:\ProgramData\Adobe\CameraRaw\CameraProfiles
The lens profiles are in:
C:\ProgramData\Adobe\CameraRaw\LensProfiles
There are comparable directories on Win XP.

What's the best way to save an 8.5 x 11 image for use as a page background in a PDF?

What's the best way to save an 8.5 x 11 image for use as a page background in a PDF? My goal is to have a relatively small final .pdf file size that includes numerous pages with full 8.5 x 11 images as backgrounds in the document. If I save at 8.5 x 11 and 72dpi (example), the image is not 8.5 x 11, and the quality is not good enough. I need help with size, dpi, and file format to save as before I place it in InDesign and then save as a .pdf.
Thanks,
Jim

Do exactly what I said then. Create the InDesign document of the required dimension, and chose whether it will be high quality print, or Interactive PDF. It really doesn't mater what format you bring the image into that document. It can be JPG, PNG, but I usually use native Photoshop PSD. The image does have to be of high enough resolution, but it can be many times bigger than iis required for the final export. (InDesign does not import the image, but rather references it on your hard drive.)
When you have placed your text and finished your page, then export it to PDF, but go through the tabs chosing suitable settings. If the image needs to be downsized, InDesign will do that at this stage while building the PDF.
If you can tell us how this presentation will be made (Projector, overhead projector, printed page etc. or just emailed to the end users) we can help you more with the final output settings.

Is there a way to make text bigger on text messages or is there a way to save messages on my computer so i can print them on my iPhone 3

is there a way to make text bigger on text messages or is there a way to save messages on my computer so i can print them on my iPhone 3

Zoom will enlarge anything on the screen, simply double tap with three fingers.
To turn Zoom on/off go to Settings > General > Accessibility > Zoom.
Large text may also work for you.
Settings > General > Accessibility > Large text. Select the font size that works best for you.
Printing or accessing text messages via the computer is not support. Google it and you will find options.
You can also copy and past the content into an email to send to yourself. Then that email could be printed out.

"Desktop & Screen Saver" settings not saving upon reboot.

"Desktop & Screen Saver" settings not saving upon reboot. Settings are always set back to factory default upon computer startup. Need help! Please!

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. You can demote it back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’renot going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

How to export/save settings for Authentication?

Hello all,
what is the best way to export/save settings for Authentication and 'core settings' of authentication using ssoadm?
I want to save all settings from:
(Top Level Realm) -> Authentication [ in web gui console].
Also all settings from 'All Core Settings'. Is there a way to do that from command line?
Thank you

Does the backed up copy of the iPhone's settings include the voicemail information? I'm wanting to do a "restore" on the iPhone, but want to find a way to keep the voicemails and not lose them

Energy Saver settings not controlling shutdown

I've reset the SMU and PRAM and my problem continues to return. The computer shuts down in about 30 minutes regardless of what settings I put into Energy Saver. The only way I can prevent it is to open an image in Photoshop and then open an edit screen in a NIK plug-in. It still tries to shutdown but this stops it. I've noticed if Lightroom is running as well that it gets shutdown (even if playing a slideshow) and then the computer tries to quit but Photoshop stops it.
This has been going on for several months. I posted previously here and only response was to reset the above, which I do periodically. Any other suggestions? Is this a software or hardware problem?
I just want control back of my Energy Saver settings. It's almost impossible to download anything that is of any size - say an Apple 150Mb update.

Hi Mel
Set Computer sleep to Never, Display Sleep to say 10 minutes and uncheck the box "Put the hard disk(s) to sleep when possible"
Then click the Schedule... button and make sure that the boxes for Startup, Wake, Sleep, Restart, Shutdown are unchecked and click OK.
Dennis

Is there any way to save a wifi network so that you don't have to join every time you open your mac?

I was wondering if there was a way to save a wifi network to your macbook so that when I open it everytime I dont have to connect it everytime.

It should remember your networks by default, but in case that option is turned off, go to System Preferences - Network - click Wifi on the left - click Advanced - and tick "Remember networks this computer has joined".
If that is already ticked, your network settings may be corrupt and it may help to create a new location - in the Location menu at the top of the Networks screen, click Edit Locations, add a new named location and try again with the wifi connection.
Matt

Pedalboard - no way to save settings

Similar Messages

Maybe you are looking for