Peer RSA key changes when the machine is rebooted

I have a network of 4 systems. 1 system is the peer that is usually online 24/7 & then 3 cliants connected to it. Now when first joined no problems happen at all. But when the peer system gets rebooted for whatever reason & when it connects back to hamachi, the cliants block the connection because the RSA keys don't match. However if they click Update it resolves the issue. But this should be done automatically shouldn't it or why is it happening in the first place? I have tried re installing countless times & even installed the cliants using the deployment feature which verified it was installed. Its annoying the hell out of me & causing me issue's!

Rightclick the connection with the yellow triangle or which has the problem & click on details. Where it says Authentication it will have an error or some notification to the right of it. Mouse over & click the pop up message box & it will allow you to update or dont update.

Similar Messages

When the machine is rebooted the "ntConsoleJava.exe" starts and uses cpu 97%

Hi,
I have coldfusion installed on a windows server2003 machine. When I rebooted the server the "ntConsoleJava.exe" process starts and uses the 97% of the cpu until you go in and kill it (there is something wrong here) also if it is rebooted the “coldfusion9 server service” is set to auto start but does not, this has to be started through the Administrator, services planel.
Can someone please help me out in this?
--Rev

Thanks Bernard,
It works fine with JInitiator but not working with
the JPI. For JPI what settings I need to do ??hi TKARIM and Bernard, i am having similar problem even with the Bernard's recommended setup. could you post the webutiljini.htm (i presume you are using config=test) ?
i am actually using jinitiator 1.3.1.28 with Oracle HTTP Server of OAS 10gR2) calling Forms Server 6i (f60cgi). After setting up according to Bernard's recommended setup steps, the java console showed that it loaded the icon jar file when it could not read the form, but it skipped the loading of the icon jar file once it read and started the form. How do we specify in the form to pick up the icon from the jar file instead from a directory ? Or do we need to specify ? Any ideas ?
Thx and Regards
dkklau

I did an auto software update on my iMac, which included a restart. When the machine restarted it's stuck with an Apple logo and spinning wheel. I've tried all of the key strokes that are supposed to work, but nothing has. Any suggestions? Thanks!

I did an auto software update on my iMac, which included a restart. When the machine restarted it's stuck with an Apple logo and spinning wheel. I've tried all of the key strokes that are supposed to work, but nothing has. Any suggestions?

Gray screen could be any number of things, bad third party at boot kext file, a bad Apple one, a bad install/upgrade of OS X, drive corruption etc.
Run through this list of fixes
Step by Step to fix your Mac

How to Delete the node from cluster when the machine crashed?

In an three nodes Rac of 11g r2,How to delete the node from cluster when the machine crashed?
There is now way to repair the machine and have to add a new one.
What is step to follow up?

hi
IF YOU WANT TO DELETE RAC1 NODE
check $./olsnodes
1) delete the instance using dbca from any active nodes
crs_stat -t
srvctl stop asm -n rac1
2) delete listener
3) delete oracle_home from oracle user
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<db_home> "CLUSTER_NODES={RAC1}
4)delete asm home
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<asm_home> "CLUSTER_NODES={RAC1}
5) update cluster node
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<db_home> "CLUSTER_NODES={active nodes like rac2,rac3}
6) update ASm home
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<asm_home> "CLUSTER_NODES={active nodes like rac2,rac3}
cd $ORA_CRS_HOME
cd crs/opmn/conf
check for
$cat ons.config
remoteport=6200
cd crs_home/bin
$./racgons remove_config rac1:6200
$ go to crs home
and $ORA_CRS_HOME/crs/install/rootdelete.sh
$ORA_CRS_HOME/crs/install/rootdeletenode.sh
check for ./olsnodes

Does the iphone cpu frequency change when the cpu load is different?

Does the iphone cpu frequency change when the cpu load is different, or it does not change, stay a fixed frequency? if it changes, how can i get the realtime cpu frequency?if anyone knows,please tell me, thank you so much!!!

As a general, historical statement Tonefox is correct. For certain particular cpus woodmeister is correct. Cpus have historically been single frequency units, though over-clocking has been done for several years. Doing so pushes the cpu beyond its guaranteed speed, but has tended to work since most cpus from quality vendors will actually operate at higher speeds. The manufacturer just does not guarantee the results...remember the Pentium fiasco in the early years of that chip? Today manufacturers are ceertifying particular product lines for over-clocking on a periodic basis. And that is what dynamic clocking really is, over-clocking but not at a constant clock speed as has been done in the past.
Much of the silicon on the market will function at higher clock rates, the only question is does the maker guarantee the accuracy and performance at those clock rates.

SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012

Hi,
Please help me with the below issue, iam trying to deploy Service pack 1 on Windows 7 , 32 Bit OS
SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012 , it does gets installed of installed manually, by remoting into the machine
also it gets installed through sccm when the machine is set to english language,
Thank you
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

Hi Friends,
we are deploying the SP1 via SCCM 2012 , and the success rate is around 50 %, its a Light touch installation where user will initiate the installation via Software Center ( Web based )
i was able to gather few errors , and this are the errors which failed during SP1 Installation 0x800f0828,
some errors which sccm reports display are
11171
10008
10021-
17031 -
1602 - User Cancelled installation
113 - No more internal file identifiers available
10070 - File handle reference is no longer available
10050 - A socket operation encountered a dead network
11170 - The task sequence manager could not successfully complete execution of the task sequence
i could not find the reason for some of the errors, also i am looking for a fix/woraround if any
Also i have noticed that in few computers the task seq failed at a place where after the sp1 installation a reboot happens and then PGP BYPASS utility is uninstalled, it did not start the PGP bypass uninstall after reboot
is there a way to cut short the Task seq and keep it simple ?
right now its like this
1. checking for prerequisite : checks for OS Name and OS version
2. installs PGP Bootgaurd Bypass
3. System Restart
4. Installing Windows 7 Service Pack 1
5. Final Restart
6. uninstall PGP Bootgaurd Bypass
Regards
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

CS6 Illustrator and InDesign colours are changed when the PDF is saved.

CS6 Illustrator and InDesign colours are changing when the saved PDFs are displayed on some different computers and for digital print output. I have ensured that the colours are all CMYK and tried different adjustments like preserving the numbers and the like but nothing is working. It prints properly on my inkjet and has displayed properly on different computers.

You need to read up on color management, color profiles and all that....
Mylenium

I have a laptop with Windows 7, and when the machine is turned off it loses all the user names

I have a Gateway Laptop with Windows 7, 64 bit. When the machine is turned off, and then
back on it loses all it's user names that have been remembered.

Do you mean names and passwords in the Password Manager or do you mean that you are no longer logged on to (remembered by) websites after closing and restarting Firefox?
There is a difference between remembering the name and password in the Password Manager and a "remember me" check box on a web page to log you in automatically.<br />
The latter usually involves the creation of a special "remember me" cookie that is stored on your computer and that is send to the server.<br />
If that "remember me" cookie is removed or gets corrupted or is not send to the server then the server won't remember you anymore and you need to sign in once again.
In case you are using "Clear history when Firefox closes":
*do not clear the Cookies
*do not clear the Site Preferences
*do not clear the Saved Passwords
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
Clearing cookies will remove all specified (selected) cookies including cookies with an allow exception.

CRS process does not startup automatically when the system is rebooted

Hi. all.
SOME TIMES(not always), CRS process ( exactly OracleCRService on
windows2003) does not startup automatically when the windows2003 is
rebooted.
O/S is windows2003 server.
DB is 10.2.0.2.0 RAC database that has 2 nodes.
I am testing a RAC database configuration, and thus rebooting one node
intentionally by turn.
I have tested about 20 times, and 17 times is OK. All required process is up
and all instance is up.
However, 3 times, OracleCRService services does not start, and concequently
database instance does not start automatically.
Here is the log of "crsd.log" file on the active node.
2007-05-31 17:43:13.281: [ CRSEVT][1720]32Processing RecoveryDone
2007-05-31 17:46:51.968: [ CRSRES][3876]32StopResource: setting CLI values
2007-05-31 17:46:52.437: [ OCRMAS][2368]th_rcfg_con: pudata retval [12]. Member [2] might have gone down
2007-05-31 17:46:52.437: [ OCRMAS][2368]proath_master: Node [2] came up/down 1/0 [1]. Problem retrieving pubdata. Should get down reconfig soon
2007-05-31 17:48:26.890: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.000: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.109: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.218: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.328: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.437: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.546: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.656: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.750: [ COMMCRS][2668]clsc_send_msg: (028BA8A0) NS err (12571, 12560), transport (533, 57, 0)
2007-05-31 17:48:27.750: [ CRSCOMM][2852]32CLSC connect failed tonmsp109ret = 9
2007-05-31 17:48:27.859: [ CRSEVT][2852]32invokepeer ret 200
2007-05-31 17:48:27.859: [ CRSRES][2852]32Remote start never sent to nmsp109: X_E2E_NotSent : Failed to connect to node: nmsp109
(File: caa_CmdRTI.cpp, line: 492
2007-05-31 17:48:27.859: [ CRSRES][2852][ALERT]32Remote start for `ora.nmsp109.gsd` failed on member `nmsp109`
Is there anyone who can help me?
Thanks in advance.
Best Regards.
Message was edited by:
user507290

oops- wrong forum!
Please try the RAC forum.

Help - cannot shutdown the machine, always reboot

Hi I has used archlinux for a year. Since kernel 2.6.29, I cannot properly shut down the machine. Every time I run "sudo halt " in terminal, the shutdown process starts normally, all services are stopped, the hard drive stops normally. But then it reboots itself
More than that, if I run halt command at grub, the machine will reboot too. But after I run halt command at grub for the second time or or the third time, the machine shuts down eventually
This happens in my machine for kernel 29 and 30
Do you guys experience the same problem? Thanks

I always use 'sudo init 0' to turn off my PC and 'sudo init 6' to reboot it.
3 and 5 I use for turning off/on X.

How to fix OS X Yosemite installation Problem? When the unit is rebooting the apple logo shows up then it is replaced by a cancel symbol? please help what to do?

How to fix OS X Yosemite installation Problem?
When the unit is rebooting the apple logo shows up then it is replaced by a cancel symbol?
Please help what to do?

Do you mean a circle with a slash through it?
If so, the drive doesn’t have or can’t find the necessary startup files.
Boot into Recovery and reinstall.

Peer's RSA keys change after reboot - workaround

Looks like a couple of builds back - you messed up the peer key renegotiation/update when using the RSA keys authentication method. Every time a network member reboots, the key changes, and each of it's peers have to update their key manually. The workaround, for all others who are afflicted with this problem, is to change the Authentication method to Password, and then setup a shared password for all peers in the mesh. This is less than desirable, of course, I'm hoping Hamachi fixes this soon ...

Hi,
Actually the problem is fixed in yesterday's 2.2.0.385 release.
The build is available from the website.
You will need to accept keys one more time after updating, but they will not be lost after a restart anymore.
Regards,

Typing order in Grid changes when the CPU in maximum usage

Hi,
We are using JDK1.4.2_15. when our CPU runs in maximum usage, when we enter the value in textboxs inside grid, The order of the key value changes. It means that if we type fast 24 in the cell, the number displayed is 42 instead of 24. If the CPU utilization is not the maximum, It works as expected.
Kindly suggest me what I can do for this.
Regards,
SelvaKumar S

Kanna143 wrote:
Hi,
We are using JDK1.4.2_15. when our CPU runs in maximum usage, when we enter the value in textboxs inside grid, The order of the key value changes. It means that if we type fast 24 in the cell, the number displayed is 42 instead of 24. If the CPU utilization is not the maximum, It works as expected.
Kindly suggest me what I can do for this.
Regards,
SelvaKumar SYou should reconsider the hardware you are running on if your CPU is at maximum usage. I connot speak for everyone, but I know when I hit 99+ % CPU untilization, then almost nothing on the user input side is going to go smoothly, if at all, and usually results in some type of error. At that point who knows what is blocking what and what has been delayed to be spawned or what is asleep and etc. That is true even if I'm just trying to type into the console, application, or some program that I have written. True on the new big server machines we have and also the oldest desktops I've ever used.
I do not think this is a Java specific problem in your case; you are just asking the machine to do something is was never intended to do.

Capturing Key press when the focus is not on VI. (event is not working).

I have a VI, and found similar in Forums. I need to catch key down event, when the focus is not on VI.
I attached the VI found in forum. Try to click on other window, for example on block diagram of VI, when VI is running and check if it works. The answer is no, it doesn't work. When you press any key, the led button must change it's state, but it does only when the focus is on VI's front panel. The question is how to control key press, when VI is minimized or inactive. Is it possible to catch key down or any similar event, when the focus is on any other application, not on VI?
Solved!
Go to Solution.
Attachments:
simulatekeyevent.vi ‏16 KB

Have a look at the "Connectivity...input devices..." menu.
For an example, open the example finder and look for "basic input demo". It should give you some ideas. Good luck!
LabVIEW Champion . Do more with less code and in less time .

Why does planning indicators change when the safety stock change?

Hai All,
I created a BOM for a finished material (FM1)and entered another finished material(FM2) in item list.
Now in MRP, I did single item multi level planning for the FM1. I checked the planning file entry through MD21 and it has NECH and NECPL marked. I checked for FM2. None of the indicators are set. Then I have been to material master for FM2 and in MRP2 screen and changed the safety stock to 950. Then I checked the plannig file again and I see the indicators NECH and NETPL are checked. I then made the safety stock 0 and checked the planning file. There is no change.
My question is why were the indicators NETCH and NETPL checked when I increased my safety stock for material FM2 from 0 to 950?
I understand that NETCH is the planning for Net changes and NETPL is for planning for changes in a horizon.
Are these indicators set because I made a change to the material? or is there any other reason?
Thank you.

Visu
The planning indicators change when there is an amendment to the planning situation that requires MRP to replan a material. Essentially, by upping your safety stock from 0 to 950 you are requesting that the MRP system replans that material to ensure that there is sufficient safety stock available.
Hope this helps
Ian

Peer RSA key changes when the machine is rebooted

Similar Messages

Maybe you are looking for