Peer to peer WIFI

I have a windows (XP) computer and a MAC G5 both equiped with working WIF cards. Can I use peer to peer between these comuters without the need for some sort of WIFI router? If so, how do I seet it up?

Tried many different combinations of the WIFI card settings on the ThinkPad, but no joy. It's as though the iPhone 4 is too noisy on the network and causes the other devices to fail to comunticate on the network.
When a 3GS is connected on its own (or with other 3GSs), I can ping it. But as soon as I connect an iPhone 4, I can no longer ping the 3GS. What is happening?
The actual card in the ThinkPad is an Intel WiFi Link 5100 AGN.

Similar Messages

Ad-hoc/peer-to-peer WIFI problems

There definitely seems to be a problem with WIFI on the iPhone 4.
At my work, I have been using a peer-to-peer/ad-hoc wireless connection setup on my laptop with internet connection sharing. I've been using this for over a year, first with my iPhone 2G and then my 3GS. Five of my colleagues have also been using the connection fine.
However, two of us have now upgraded to iPhone 4s and, although they work fine on our home WIFI networks, neither of them work on our work ad-hoc network. They connect to the network, but it takes ages before the WIFI symbol appears and, when it finally does, you cannot access the internet.
Also, if one of our iPhone 4s connects to the network, all other 3Gs and 3GSs can’t access the internet! It’s amazing to watch. Surf from web page to web page on a 3GS fine, connect an iPhone 4 and, bang, 3GS stops loading pages. Turn off WIFI on the iPhone 4 and 3GS starts loading pages again. Weird!
Before anyone asks, there are no ip address conflicts on the network and we have checked the settings on all of the phones numerous times; they’re fine.
We’ve also tried this on three different laptops although, I have to admit, they are all the same model; IBM ThinkPad Lenovo R400.
I’m suspecting it’s a frequency issue and I can probably resolve it by adjusting the WIFI card settings on the laptop, but so far I’ve had no joy.
Any ideas?

Tried many different combinations of the WIFI card settings on the ThinkPad, but no joy. It's as though the iPhone 4 is too noisy on the network and causes the other devices to fail to comunticate on the network.
When a 3GS is connected on its own (or with other 3GSs), I can ping it. But as soon as I connect an iPhone 4, I can no longer ping the 3GS. What is happening?
The actual card in the ThinkPad is an Intel WiFi Link 5100 AGN.

How do i set a peer to peer network between my iMac and windows machines?

I want to set up a peer to peer network between my iMac and Windows based computers in my house. I also want it to a wireless set up. Mostly being done to share videos, pictures, and music. Any insight would be appreciated.

I'm trying to connect my MacBook Pro to Wifi using internet sharing
Why?
Just connect the MacBook to the same internet as your iMac.
MacBook > Wi-Fi router > Internet.
You are connected to the internet with your iMac.
iMac > Wi-Fi router > Internet
Why do you want to go MacBook (via Wi-Fi) > iMac > Wi-Fi router > Internet?

HT204289 Apple tv a1469 7.1 to macbook pro retina late 2013 yosemite 10.10.2 peer to peer airplay connection probem..?

Macbook pro retina late 2013 yosemite 10.10.2 wifi bluetooth both turned on same thing for apple tv a1469 and there isn't any network or internet connection. Macbook pro can see apple tv as a mirroring device but cannot connect to apple tv a1469. There is a connection failed or the screen code is wrong message appears but no peer to peer airplay between macbook pro retina and apple tv a1469. On the ios side everything just works except sometimes there is no audio problem (when switching between different apps) between ios and apple tv but on the screen mirroring side everything looks ok. Please help me to connect apple tv a1469 to macbook pro, thanks.
Airplay peer-to-peer

Macbook pro retina late 2013 yosemite 10.10.2 wifi bluetooth both turned on same thing for apple tv a1469 and there isn't any network or internet connection. Macbook pro can see apple tv as a mirroring device but cannot connect to apple tv a1469. There is a connection failed or the screen code is wrong message appears but no peer to peer airplay between macbook pro retina and apple tv a1469. On the ios side everything just works except sometimes there is no audio problem (when switching between different apps) between ios and apple tv but on the screen mirroring side everything looks ok. Please help me to connect apple tv a1469 to macbook pro, thanks.
Airplay peer-to-peer

Peer to Peer Airplay w Apple TV and iPhone?

I want to do peer to peer screen sharing from my iphone 5 (ios 8.1) to my new Apple TV (model A1469, 7.0.1 (6912) software). We don't have WIFI in the office and that's why I want to do peer to peer. I can't get my phone to find the Apple TV when I click on Airplay. It only shows my phone as a device.
I have rebooted my phone and the Apple TV. Airplay is ON. Security option is "password". I installed the new OS on my phone and also did the updates for the Apple TV. I've read all the instructions on apple.com for doing this, which is really just a couple of sentences (Use AirPlay to wirelessly stream content from your iPhone, iPad, or iPod touch). Still no luck. I'd love some help! thanks.

HI man,
same problem here, latest iOS, latest ATV update, not a single device works over peer to peer...
I have two ATV's, macbook air, iPad mini, iPad Air, iPhone 5s, not a single device after this update can get AirPlay... so disappointed with Apple...

Peer to peer airplay

hi
I'm using yosemite on an mid 2012 macbook pro and an apple tv rev a with os7.0.
i can't figure out how to use peer to peer airplay.
my wifi router is a very weak, so the peer to peer would help me a lot.
the wifi is turned on in the screenshot, but not logged into a network.
greetings michael

iPad 3rd generation doesn't support Peer-to-Peer Airplay. Apple quietly said it was for iOS devices introduced in LATE 2012. Like for Handoff; certain devices with the latest Wi-Fi specifications can get this feature. The iPad 3 was introduced in EARLY 2012. I tried, but it didn't work. Here is what I found in the Apple TV Section.
AirPlay requires an Apple TV (2nd generation or later) with an iOS device running iOS 4.3 or later or a Mac with iTunes 10.2 or later. Some features require the latest software.
Peer-to-peer AirPlay requires a Mac (2012 or later) with OS X Yosemite or an iOS device (late 2012 or later) with iOS 8; and an Apple TV (3rd generation rev A, model A1469 or later) with Apple TV software 7.0 or later.
AirPlay Mirroring is available with iPhone 4s or later; iPad 2 or later; iPad mini; iPod touch (5th generation); and iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), MacBook Pro (Early 2011 or newer), and Mac Pro (Late 2013) with OS X Mountain Lion or later.
Dual-screen capability is available with iPhone 4s or later, iPad 2 or later, iPad mini, and iPod touch (5th generation).

Multiple COM Ports after installing to peer to peer Brother Laser Printers.

My particular situation is one Iv'e never encountered in thirty years of working on micro-computers. I have a peer to peer LAN hooked through a Gateway (4-Port \ WIFI (Frontier=Telco) ADSL\MODEM\Router made by Net Gear. I have 4 Wireless ip's and 3 cat 6
wired ip presences on the LAN. All the network is MS WIN 7 64 bit software and all the computers are 64 bit hardware, I have the home Group numbers matched up and everything shared on the LAN side of the Gateway. The problem on one of the clients (Dell
Notebook, 2 years old) is that when I installed the two cd's with the Brother suite of software (HL-2270 DW Monochrome laser printer and a (MFC-9130 CW Color Laser all in one Printer\scanner\fax\copier everything was fine for a while until the two printers
began to jump their dynamic assigned IP's. So, I statically assigned on the two printers with the ip address they worked on after rein stalling both software cd's ; uninstalled the old software first of course. I am hunting for a fix, something in the OS or
Registry short of a clean reload of the whole Dell notebook to bring the ports back to 3 LP and 4 com ports! They read 4 lpt ports and 24 COM ports presently.
Thanks For You Time,
Jamie Skinner
[email protected]

Have you gone into Devices and Printers, right clicked on one of the printers and selected "Printer properties" and then the
Ports tab and tried deleting the unwanted Com ports there?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Peer to peer AirPlay setup

I have just purchased a 3rd generation AppleTV with the aim of using peer-to-peer Airplay to mirror what is on my iPad (iPad Air running IOS8). I was assured by the staff at the Apple store that this works well when you cannot access a WiFi network. However after 3 hours of trying I am at a loss as to how to get this to work, any ideas would be greatly received.

Hello Sandclimber,
I'm sorry to hear you are having issues with your Apple TV and your iPad Air. If you are having difficulties connecting via peer-to-peer AirPlay, you may want to double check that Bluetooth is enabled on both devices, as noted in the following article:
Peer-to-peer AirPlay
With peer-to-peer AirPlay, your iOS device and Apple TV don't need to be on the same Wi-Fi network. If you have one of these products, you can use peer-to-peer AirPlay:
* iPhone 5 or later, iPad (4th generation or later), iPad mini, or iPod touch (5th generation) using iOS 8 or later.
* Apple TV (3rd generation rev A, model A1469 or later) with Apple TV software 7.0 or later. Find out which Apple TV model you have.
To use peer-to-peer AirPlay, your iOS device needs to have both Wi-Fi and Bluetooth turned on.
You'll need an Internet connection to stream iTunes content.
Use AirPlay to wirelessly stream content from your iPhone, iPad, or iPod touch - Apple Support
Sincerely,
- Brenden

Peer to peer speeds

I am using a gmae online called IRacing, when i use this site my connection speed drops. Can anyone tell me if BT are thinking this is a peer to peer connection so are supressing my speed. If this is the case BT needs to update their system to stop the restriction. Any help would be appriciated

It is a P2P online racing sim, that is why your speed is being throttled.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Peer to Peer Myrio

Being new with NI techology I am currently experimenting with different way's to use the myrio.
Is their anyway to connect the myrio to a Peer to Peer to network with a labtop? I will soon be doing a project in which I will be planting a myrio on a rocket to control various mechanicms. It seems like their will be shortage of room for a USB cable, so I am wondering is their anyway to create a PEER-to-PEER network with my labtop and if so where can I find more information about this.
Thank you
Dougie

Yup, you should use WebDAV to transfer files to and from the myRIO and it should work fine via ad-hoc wifi network.
Is that what you meant? If you're just asking about the path you may need to use the myRIO IP address rather than the host name to connect to it when you're on an ad-hoc network.
-Sam K
LabVIEW Hacker
Join / Follow the LabVIEW Hacker Group on google+

Cisco 5505 VPN assistance - Resending P1 and Peer to Peer List No match

Hello and thanks in advance to anyone that can help me with the IPSec connection. the VPN were working when i first created them but now they wont connect. Here is the error on the primary (local) firewall: (yes i know the time isnt set yet on the firewall)
4|May 17 2007|13:51:55|713903|||||IP = X.X.X.X, Error: Unable to remove PeerTblEntry
3|May 17 2007|13:51:55|713902|||||IP = X.X.X.X, Removing peer from peer table failed, no match!
6|May 17 2007|13:51:55|713905|||||IP = X.X.X.X, P1 Retransmit msg dispatched to MM FSM
5|May 17 2007|13:51:55|713201|||||IP = X.X.X.X, Duplicate Phase 1 packet detected. Retransmitting last packet.
6|May 17 2007|13:51:47|713905|||||IP = X.X.X.X, P1 Retransmit msg dispatched to MM FSM
5|May 17 2007|13:51:47|713201|||||IP = X.X.X.X, Duplicate Phase 1 packet detected. Retransmitting last packet.
The local firewall has one VPN configured and the remote has 2 (1 working and the other not): Local Firewall is Base licensing with 3DES. As far as I can tell they have the same VPN parameters but maybe the remote has pfs1 turned on? Ive played with various settings and cant seem to get it to work. The cryptomap has the same firewall rules in it (obviously reversed on remote). Any help much appreciated! I Have a third site doing exactly the same thing (once again also works on another site to site but not this one). It's weird because I used the IPSec wizard and got it to work and rebooted the ASA and tunnel came up yet again but now my debug log is just full of this info and tunnels never come up.....the only time it was up was for a few hours then wont come up anymore...odd..
Local Fire Wall:
hostname ciscoasa
names
name 172.25.42.0 MASALan
name 172.25.7.0 FHR
name 172.25.43.0 MR
interface Vlan1
nameif inside
security-level 100
ip address 172.25.6.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 10.10.10.30 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
switchport access vlan 2
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
boot system disk0:/asa821-k8.bin
ftp mode passive
dns server-group DefaultDNS
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object-group network inside-network
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object ip
protocol-object icmp
protocol-object igmp
protocol-object gre
object-group protocol DM_INLINE_PROTOCOL_2
protocol-object ip
protocol-object icmp
protocol-object igmp
protocol-object gre
object-group network DM_INLINE_NETWORK_4
network-object MASALan 255.255.255.0
network-object MR 255.255.255.0
object-group network DM_INLINE_NETWORK_6
network-object 172.25.6.0 255.255.255.0
network-object FHR 255.255.255.0
object-group protocol DM_INLINE_PROTOCOL_3
protocol-object ip
protocol-object icmp
protocol-object igmp
protocol-object gre
object-group network DM_INLINE_NETWORK_3
network-object 172.25.6.0 255.255.255.0
network-object FHR 255.255.255.0
object-group network DM_INLINE_NETWORK_5
network-object MASALan 255.255.255.0
network-object MR 255.255.255.0
access-list outside_2_cryptomap extended permit ip 172.25.6.0 255.255.255.0 MASALan 255.255.255.0
access-list NONAT extended permit ip any 172.25.4.0 255.255.255.0
access-list NONAT extended permit ip 172.25.6.0 255.255.255.0 MASALan 255.255.255.0
access-list NONAT extended permit ip FHR 255.255.255.0 MR 255.255.255.0
access-list NONAT extended permit ip object-group DM_INLINE_NETWORK_3 object-group DM_INLINE_NETWORK_5
access-list outside_access_in extended permit object-group DM_INLINE_PROTOCOL_3 object-group DM_INLINE_NETWORK_4 object-group DM_INLINE_NETWORK_6
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool RemotePool 172.25.4.1-172.25.4.2 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-621.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list NONAT
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 10.10.10.1 1
route inside 172.25.1.0 255.255.255.0 172.25.6.2 1
route inside 172.25.2.0 255.255.255.0 172.25.6.2 1
route inside 172.25.8.0 255.255.255.0 172.25.6.4 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
http server enable
http 172.25.0.0 255.255.0.0 outside
http 172.25.0.0 255.255.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map outside_map 2 match address outside_2_cryptomap
crypto map outside_map 2 set peer 216.183.157.158
crypto map outside_map 2 set transform-set ESP-AES-128-SHA
crypto map outside_map 2 set security-association lifetime kilobytes 4608000
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 1
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
no crypto isakmp nat-traversal
telnet timeout 5
ssh 172.25.0.0 255.255.0.0 inside
ssh 172.25.6.0 255.255.255.0 inside
ssh 172.25.0.0 255.255.0.0 outside
ssh timeout 60
console timeout 0
management-access inside
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol IPSec
group-policy GroupPolicy1 internal
group-policy GroupPolicy1 attributes
vpn-filter none
vpn-tunnel-protocol IPSec
tunnel-group osfdremote ipsec-attributes
pre-shared-key *
tunnel-group X.X.X.X type ipsec-l2l
tunnel-group X.X.X.X general-attributes
default-group-policy GroupPolicy1
tunnel-group X.X.X.X ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
REMOTE FIREWALL
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group CHN
ip address pppoe setroute
ftp mode passive
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object-group network DM_INLINE_NETWORK_1
network-object 172.25.42.0 255.255.255.0
network-object RFN 255.255.255.0
object-group network DM_INLINE_NETWORK_2
network-object RHQASAnet 255.255.255.0
network-object RHQNet 255.255.255.0
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object ip
protocol-object gre
protocol-object tcp
object-group network DM_INLINE_NETWORK_3
network-object 172.25.42.0 255.255.255.0
network-object RFN 255.255.255.0
object-group network DM_INLINE_NETWORK_4
network-object FHData 255.255.255.0
network-object FHR 255.255.255.0
object-group protocol DM_INLINE_PROTOCOL_2
protocol-object ip
protocol-object gre
protocol-object tcp
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended permit tcp any any eq www
access-list outside_cryptomap extended permit ip object-group DM_INLINE_NETWORK_1 RHQASAnet 255.255.255.0
access-list inside_nat0_outbound extended permit ip RFN 255.255.255.0 RHQNet 255.255.255.0
access-list inside_nat0_outbound extended permit ip 172.25.42.0 255.255.255.0 RHQASAnet 255.255.255.0
access-list inside_nat0_outbound extended permit ip any 192.168.5.0 255.255.255.240
access-list inside_nat0_outbound extended permit ip 172.25.42.0 255.255.255.0 FHData 255.255.255.0
access-list inside_nat0_outbound extended permit ip RFN 255.255.255.0 FHR 255.255.255.0
access-list inside_access_in extended permit object-group DM_INLINE_PROTOCOL_1 any object-group DM_INLINE_NETWORK_2
access-list inside_access_in extended permit object-group DM_INLINE_PROTOCOL_2 any object-group DM_INLINE_NETWORK_4
access-list outside_cryptomap_1 extended permit ip object-group DM_INLINE_NETWORK_3 FHData 255.255.255.0
no pager
logging enable
logging asdm debugging
mtu inside 1500
mtu outside 1500
ip local pool 192.168.5.1 192.168.5.1-192.168.5.10 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 101 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 101 0.0.0.0 0.0.0.0
access-group inside_access_in in interface inside
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 10.110.10.1 1
route inside RFN 255.255.255.0 172.25.42.2 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 172.25.0.0 255.255.0.0 inside
http 10.7.72.0 255.255.255.0 inside
http 192.168.5.0 255.255.255.0 inside
http 192.168.5.0 255.255.255.0 outside
http RHQNet 255.255.255.0 inside
http RHQASAnet 255.255.255.0 inside
http RHQASAnet 255.255.255.0 outside
http RHQNet 255.255.255.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map0 2 match address outside_cryptomap_1
crypto map outside_map0 2 set peer Y.Y.Y.Y
crypto map outside_map0 2 set transform-set ESP-AES-128-SHA
crypto map outside_map0 2 set security-association lifetime seconds 28800
crypto map outside_map0 2 set security-association lifetime kilobytes 4608000
crypto map outside_map0 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map0 interface outside
crypto isakmp enable outside
crypto isakmp policy 5
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 0.0.0.0 0.0.255.255 inside
telnet 172.25.0.0 255.255.0.0 inside
telnet 192.168.5.0 255.255.255.0 inside
telnet 192.168.5.0 255.255.255.0 outside
telnet timeout 5
ssh 192.168.5.0 255.255.255.0 inside
ssh 192.168.5.0 255.255.255.0 outside
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy GroupPolicy1 internal
group-policy GroupPolicy1 attributes
vpn-tunnel-protocol IPSec
group-policy remotevpn internal
group-policy remotevpn attributes
vpn-tunnel-protocol IPSec
vpn-group-policy remotevpn
tunnel-group Y.Y.Y.Y type ipsec-l2l
tunnel-group Y.Y.Y.Y general-attributes
default-group-policy GroupPolicy1
tunnel-group Y.Y.Y.Y ipsec-attributes
pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
policy-map global-policy
class inspection_default
inspect pptp
service-policy global_policy global
prompt hostname context

May 18 08:13:03 [IKEv1 DEBUG]: IP = X.X.X.X, IKE MM Responder FSM error hi                                                                                        story (struct &0xd578cda0) , : MM_DONE, EV_ERROR-->MM_WAIT_MSG3,                                                                                         EV_RESEND_MSG-->MM_WAIT_MSG3, NullEvent-->MM_SND_MSG2, EV_SND_MSG-->MM_SND_MSG2                                                                                        , EV_START_TMR-->MM_SND_MSG2, EV_RESEND_MSG-->MM_WAIT_MSG3, EV_RESEND_MSG-->MM_W                                                                                        AIT_MSG3, NullEvent
May 18 08:13:03 [IKEv1 DEBUG]: IP = X.X.X.X, IKE SA MM:8e338e16 terminatin                                                                                        g: flags 0x01000002, refcnt 0, tuncnt 0
May 18 08:13:03 [IKEv1 DEBUG]: IP = X.X.X.X, sending delete/delete with re                                                                                        ason message
May 18 08:13:03 [IKEv1]: IP = X.X.X.X, Removing peer from peer table faile                                                                                        d, no match!
May 18 08:13:03 [IKEv1]: IP = X.X.X.X, Error: Unable to remove PeerTblEntr
Is the result and then it repeats =)

SAP Business One 8.8 running on a server with Peer to Peer

Can SAP Business One 8.8 be install and run in a server with a Peer to Peer Operative system?

You have more than one Oracle Release on the Server. hence more than one ORACLE_HOME.
Check which is your default ORACLE_HOME on the server and check which of the homes PERL5LIB environment variable is pointing from both command prompt and in Windows.
That could explain the funny bahaviour. If you change ORACLE_HOME, that could help.

How to make a peer to peer connection in a network using sockets

My Project is about a multi agent meeting scheduling system.. I've kept the DB in the server and I only use the server to retrieve data from the database. I have used sockets to communicate with the server.
Each peer in the network is an agent for a perticular user and these agents will be communicating with each other for negotiation purposes..
The problem I have is that, I couldnt communicate wit other peers using sockets.. I couldnt find any sample java code of sockets to overcum this problem.f sumone has a sample code plz send me.
And if there is a more efficient and easy way I can connect these peers except sockets, plz tell me and if u have a sample java code plz be kind enough to send.
This is my final year project in the University
Thank you
Sajini De Silva ([email protected])

Hi Sajinidesilva,
I think you'll find more support in the [JXTA Community|https://jxta.dev.java.net/] for your project. Also, there's an interesting article to start with : [Introduction to the Peer-to-Peer Sockets Project|http://www.onjava.com/pub/a/onjava/2003/12/03/p2psockets.html].

I want to set up my router for Peer To Peer connection.

I recently started playing a new game that requires Peer to Peer connection, and I lag a lot when I log in, so I was wonder what options I would have to check, How to enable/disable options to optimize my gaming connection.
What kind of router I have is MI424-WR Rev. E Actiontec. Or something along that line.. I was researching what to do and it had a lot to do with DMZ, Ports, and firewall. But any help would be appreciated.
Im off for tonight so I wont be able to check the post until like 9 hours from now. Goodnight
Oh if you need to know what game it is for some odd reason its Dungeon Fighters Online, or http://dungeonfighter.nexon.net/
I like arcade style games.
Oh and my brother connects to this router to and i want him to keep internet so none of the options can interfear with his internet connection.

I took a quick look at the www site for the game, but did not see anything definite from the vendor on what port(s) the game uses.
You would need to set up you gaming machine with a Static TCP/IP Address and configure the Verizon Router with Port Forwarding of the ports used by the game. I would ONLY set it up in the DMZ if all else fails.
Note that the Verizon Router has a small NAT Table which may effect your ability to play a P2P game for extended periods of time.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.
If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Windows 7 Home Premium Peer-to-peer network over a switch

Sorry for asking such a basic question here. I am trying to setup a small office network. There are 5 computers all running Windows 7 Home Premium. Using a switch I want to connect all 5 together. I have a software package running on PC1, which will contain
a database. The other four computers, (PC2, PC3, PC4, PC5), will have a client running on them that will be able to access the database on PC1. I also have two printers and a router for internet access.
I have pulled the cables, managed to cap them correctly (tested them with a cable tester), and have connected the PC's to the switch via the cables.
I have looked on the internet for how connect the PC's together but I am getting confused, between all the videos and websites mixing XP with Windows 7 and Vista and wireless to cross-over and and and.....
Could someone please let me know what I need to do next?

Hi,
In a peer-to-peer setup, every computer are both client and server. each computer communicates directly with others in the network. It's much more common in the home.
You need have a router (possibly with wireless capability) and the necessary Ethernet cords to run the router to the modem and from the router to all of your computers.
Then add them in the same workgroup or HomeGroup.
Here is a detailed guide, please follow that step by step:
Peer-To-Peer Network Setup
http://www.functionx.com/networking/Lesson04.htm
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Karen Hu
TechNet Community Support

Peer to peer WIFI

Similar Messages

Maybe you are looking for