Pegasus R4 Will Not Reset After Power Outage

I have a Pegasus R4 hard drive system connected by a Thunderbolt cable to an iMac. It has bee functioning flawlessly for several months. We had a power outage during the day and ever since the R4 has not been able to reset. Anyone have any advice out there on this issue.

Not trying to be a stick in the Mud here but you guys that are serious gamers need to always keep a close eye on the weather. If there is the possibility of a storm you must have an APC or Battery Backup. Just a Power Strip is sometimes not enough. Of course you have No Control over Power Companies cutting your Power and causing a Power Surge that fries your equipment. Please Please be aware of the weather I cannot tell you how many things I have cooked over the years by not taking this advise. It can save you thousands of dollars.

Similar Messages

Hyper-V manager will not start after power outage and memory corruption

We suffered a 2 hour power outage and upon power restoration I had a corrupted memory strip. replaced memory and cannot start Hyper-V manager due to lost mmc file or does not exist. virtual machines are running fine I just can't manage or create any additional.
This is on win server 2012.
Anybody....Please Help!!!@!@!

Try:
Add-WindowsFeature -Name Hyper-V-Tools
This installs the Hyper-V Manager GUI tool only.
If that does not repair it, try:
Remove-WindowsFeature -Name Hyper-V-Tools
Add-WindowsFeature -Name Hyper-V-Tools
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

Hyper-V Host displays error "Automatic Reapir Failed" and will not start after Power Outage

I have a single Dell PowerEdge configured as a Hyper-V host running Wink12 R2 Preview as a Native Boot VHD and hosting about a dozen VM's. We had a break in the power, just a lights on lights off, but it was enough to shut the machine down and trigger restart.
But the machine won't restart--instead it displays a message "Automatic repair Failed" and none of the Advanced repair options work to get the host back online.
Any assistance is greatly appreciated.
Michael J. Murphy

Hi MJMurphy,
Sorry for the delay , it seems likely a disk problem cause of unexpect interrupt .
Please boot the host from OS ISO and try to copy the VMs' VHD files and any important data to a safe place (such as external USB)via command prompt mode .
(perhaps you need to prepare raid driver if you have a raid controler )
Using diskpart --> list volume to check the status of disk partion or you can contact the hardware vendor to check it .
Hope this helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

My ipod will not reset after several attempts

I recently bought a new Iphone and have successfully transferred my apps/data from my Ipod Touch (4th generation). I am now trying to "erase all content and Settings" via the settings button. All I get when the screen goes black is the apple logo. NO progress bar whatsoever. I have tried this several times even leaving the device (plugged into a power source) on all night long and still nothing. It simply will not reset. Is there something else I need to do? I have deleted all apps and anything else from the Ipod in hopes that would work but still nothing. It just locks up in the reset mode. Then when I restore it to stop the process most of the deleted apps come back. HELP!!
P.S. There is no Apple store nearby to help me with this so I'm hoping this forum will.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

E4200 Mac will connect but not pc after power outage

We had a power outage. Wireless connection disrupted and did not correct itself as in the past.
A MAC and an android os phone will connect but not PC's with different operating systems.
Hardwired computers will connect and go on the internet but not when try wirelessly on windows PC's.
I have a comcast modem and a e4200 wireless router.
Tried repowering modem and router.
Tried disconnecting Cisco on computers and then reconnecting to wireless connection.
Sometimes laptops will discover the Cisco and show excellent strength of signal but will not connect.
Wireless is active on the laptops.
Not sure what has changed to cause this for the win PC's only. (IP?etc?)
Any help is appreciated.
Thanks.
Solved!
Go to Solution.

I read thru some article about the E4200
Reset
This button allows you to reset the router to its factory defaults. Press and hold the Reset button for approximately 10 seconds. This button is located between the USB and Power ports. As an alternative, you can restore the defaults from the Administration tab > Factory Defaults sub-tab in the router’s web-based setup page.
Title: Getting to know the Linksys E4200
Article ID: 22737
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=7824947fe4444ac3ad5ccb896007e9b8_Getting_to_Know_t...

External hard drive not recognized after power outage

After a power outage last night my WD external hard drive is not showing up. The power light is on on the drive, the DVR is working normally, except my external drive is not showing up. I unplugged power from the DVR and restarted it, but no change.

I have a 2G Samsung drive in Rosewell external encloser running for over a year. Two times have lost power and DVR would not recongize external drive. The procedure I used was to reboot twice via menu>settings>customer support>in home agent>reboot STB. Mine required two resets, the first reboot looks like DVR recongizes drive but does show as available but second reboot shows disc activity during last part boot up of box then external would show with all recordings and normal operation. I have not lost any recordings.

My iBook will not display after Power up Chime

Please I need Help.
My iBook (16VRAM) Does not display after the power up chime. so i have tried to reset the PRAM by holding down CMD, OPTION, P & R after the chime, But Nothing Happens, I dont hear a second chime (I dnt Knw how long am suppose to hold down the keys, But i held it for 2 mins and still nothing)
Please help.
Thanks.

Welcome to Apple Discussions Aaron
Force quit in the middle of an installation spells "trouble". Try starting the computer in Safe Mode. If successful, restart the computer and see if it fully boots. If not, you more than likely have directory damage that needs to be repaired. Disk Utility may be up to the task.
Post back

MacMini PPC not starting after power outage

MacMini PPC running Leopard - plugged into a UPS & power strip with a surge protector - it was running last night when the power went out in our area - this morning it won't boot up - get the chime the Apple logo & the spinning clock - can hear the usual startup sounds but a few seconds later it shuts down - inserted the install disk & held the option key - it showed the internal harddrive (with a blue X), the external harddrive with the SuperDuper backup (with a blue X), the install CD (with a blue X) & the Apple Hardware Test, although the mouse works the pointer remains a clock & after a few seconds it shuts down - any ideas or suggestions ? - the Mini acts as our wifi source so am off line except for the iPhone

I take it that the power outage was long enough to deplete the UPS and that the Mini therefore had its power pulled abruptly when the UPS ran out of juice?
Since you have a PPC Mini, you can try a PMU reset. (This is only PPC Minis; don't use it if you have an Intel Mini. Intels get the SMC reset.)
PMU reset:
http://support.apple.com/kb/HT2183

Toshiba C855-S5236 /P/N PSC72U-01S006 will not start after power is disconnected

Toshiba Satelite C855-S526 P/N PSC72U-01S006 laptop when power is disconnected either from wall or laptop the computer will not restart. Have to pull battery and hold power button down. Then plug in and play with pushing button until it boots up. Then can shut down replace battery and reboot and it works fine. Can restart over and over day in and day out, until the power is removed again. Any suggestions what is wrong. I have replace the DC Power Jack thinking that might be it. Still does the same thing.
Solved!
Go to Solution.

I figured it out, I think. I change the battery and it has worked every time booting up after it was unplugged from the power and plugged back in. Do not know why.

Why does airport extreme need hard reset after power outage

Airport extreme is unresponsive after interruptions in power and requires a hard reset to get working again. It will also freeze during heavy usage from multiple computers and then a hard reset is necessary to get it working again. It is becoming a chore.

The obvious answer is that if you are using firmware 7.5.2, downgrade to 7.4.2.
Otherwise if you can simulate a power fail by pulling the plug and still have the problem then
If you are still under warranty, take it back...
Jerry

[Solved] KDM will not open after power failure

Had a power failure and upon reboot, I get the following error:
cannot open theme file
/usr/share/apps/kdm/themes/archlinux-simplyblack
I cd'd to the above path but only 'circles' and 'oxygen' are in the themes folder.
I even ran pacman -S kde to reinstall all the kde packages, but no luck.
Any ideas on a fix?
Thanks!
Last edited by SkinnyJ (2009-05-05 02:15:53)

glad it works now, if you're using ext4 i hear power failures can corrupt some files; otherwise, i dunno.
anyway, please mark as [solved]. and thanks for the bit about my enemies .

HT1414 my ipod will not reset after forgetting password

my 15 year old forgot her password an now her ipod want do anything.It just has "ipod is disabled"

You'll need to connect it to the iTunes library you normally sync it with and restore it. If iTunes asks you for this passcode before it will let you proceed, connect the iPod to iTunes in recovery mode instead using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock

My phone keeps flashing the apple icon and going to a black screen. It will not reset. How do I fix this?

My phone keeps flashing the apple icon and going to a black screen. It will not reset. How do I fix this?

also have this problem. will not reset. checked power cord, it charges other phone.

IPod classic will not reset nor will it restore

My 2nd iPod classic (30GB) will not reset after numerous attempts.
Also when I try to restore it to original settings, given a message that "The iPod cannot be restored because it contains files that are in use by another application".
I have Windows 7 Enterprise Edition and this has never happened before. The only thing out of the ordinary was that this iPod was not used for about 4-5 months which drained the battery as it wasn't recharged.
Any assistance is appreciated.

Had this one myself ... while playing music there's a little loop icon on the left right below where it shows the current position in the song. Touch it once to turn repeat off.

My AppleTV stopped working after power outage. Light is on and I rebooted and reset w remote but it keeps giving me a pic of the Hdmi cord like it is not recognizing the hdmi as being plugged in. I've unplugged it several times.

My AppleTV stopped working after power outage. Light is on and I rebooted and reset w remote but it keeps giving me a pic of the Hdmi cord like it is not recognizing the hdmi as being plugged in. I've unplugged it several times.

It is in recovery mode. The picture is telling you to connect to iTunes via micro usb cable in order to restore.
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

Pegasus R4 Will Not Reset After Power Outage

Similar Messages

Maybe you are looking for