Pegging Overview - base tables
Hi All,
I have a requirement where in i need to find the tables where data is stored for Pegging Overview :
transaction - /SAPAPO/RRP3 .
i know that there is ome thing called as live cache which helps populate data during run time.
But there has to be some place where the Purchase Requistions / Planned Orders/ Purchase Orders are saved for the function module like
/SAPAPO/OM_ORDER_GET_DATA --- one level of pegging relationship
/SAPAPO/EFPL_ORD_NET_GET --- pegging relationship across the entire strucuture
to get the data at run time.
Could any one please help out ???
Regards,
Vidya
Hi Vidya,
LiveCache not just helps populate data during run time but contains some tables itself for performance reasons. These are called anchor tables. As of SCM 5.0, we have 3 such tables.
The following are those 3 table.
/SAPAPO/ORDKEY information about orders in APO
/SAPAPO/ORDMAP information about orders in APO for the transfer between APO and R/3
SAPAPO/STOCKANC as of SCM 5.0: table contains stock anchors. Further details can be found in note 837744
I guess the first 2 tables should contain the data youa are looking for.
Similar Messages
-
Pegging overview for a product
Hello
In the transaction RRP3 I have a pegging overview for location product.
Is there any possibility to get an pegging overview for a product (like a table in the RRP3)?
When no? What function have I use for a z-program.
Thanks,
SvenHello Ramesh
I use the FM BAPI_MOSRVAPS_GETLIST2
If found the problem, but not the solution.
If i debug the BAPI_MOSRVAPS_GETLIST2:
In the FM APO_BAPI_SELECT_GET_ORDID the FM /SAPAPO/DM_PRODUCTS_GET_IDS have a problem to get the matlocids.
When i debug these FM, there is no problem.
When i run the FM normal, the FM lost the selection.
Thanks, Sven
DATA: product_tab TYPE TABLE OF BAPIPRODUCTRANGE,
product TYPE BAPIPRODUCTRANGE,
location_tab TYPE TABLE OF BAPILOCRANGE,
location TYPE BAPILOCRANGE,
orderhead TYPE TABLE OF BAPI10503ORDHEADOUT,
output_nodes TYPE TABLE OF BAPI10503ORDOUTPUTOUT,
pegging_output_nodes TYPE TABLE OF BAPI10503ORDOUTPUTPEGOUT,
return TYPE TABLE OF BAPIRET2.
product-low = '0000000000000000000000000000000008809500'.
product-option = 'EQ'.
product-sign = 'I'.
APPEND product TO product_tab.
location-low = 'DLZ1'.
location-option = 'EQ'.
location-sign = 'I'.
APPEND location to location_tab.
break leisve.
CALL FUNCTION 'BAPI_MOSRVAPS_GETLIST2'
EXPORTING
LOGICAL_SYSTEM = 'SC7CLNT100'
START_TIME = '20000101000000'
END_TIME = '20101231000000'
* EXCLUDE_EXPORT_FLAGS =
* MAX_NUMBER_OF_ORDERS =
* TRANSFER_MODE =
PLNG_VERSION = '000'
* IO_NODE_SELECTION = 'O'
* IMPORTING
* NUMBER_OF_ORDERS =
TABLES
PRODUCT_SELECTION = product_tab
LOCATION_SELECTION = location_tab
ORDER_HEADS = orderhead
OUTPUT_NODES = output_nodes
PEGGING_OUTPUT_NODES = pegging_output_nodes
RETURN = return
break leisve. -
How to stored data after clicking checkbox in data base table
REPORT ZT .
TYPE-pools: slis.
tables:mkpf,mseg,mard,COWB_COMP,ZTABLE.
Types:BEGIN OF tp_data,
mblnr LIKE mseg-mblnr,
matnr LIKE mseg-matnr,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
lgpbe LIKE mard-lgpbe,
charg LIKE mseg-charg,
bwart LIKE mseg-bwart,
budat LIKE mkpf-budat,
menge LIKE mseg-menge,
meins LIKE mseg-meins,
kostl LIKE mseg-kostl,
aufnr LIKE mseg-aufnr,
rsnum LIKE mseg-rsnum,
endkz like COWB_COMP-endkz,
END OF tp_data,
tp_tbl_data TYPE STANDARD TABLE OF tp_data.
MODIFIED*******************
DATA: WA TYPE TP_DATA.
MODIFIED*******************
*data: t_data like Y00_MM_ISSUE_DAT occurs 0 with header line.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
DATA: it_data TYPE STANDARD TABLE OF tp_data.
MODIFIED*******************
DATA : V_REPID LIKE SY-REPID.
MODIFIED*******************
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
*========================== Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
smatnr FOR mseg-matnr MODIF ID m2,
swerks FOR mard-werks MODIF ID m3,
slgort FOR mard-lgort MODIF ID m4,
slgpbe FOR mard-lgpbe MODIF ID m5,
scharg FOR mseg-charg MODIF ID m6,
sbwart FOR mseg-bwart MODIF ID m7,
skostl FOR mseg-kostl MODIF ID m8,
saufnr FOR mseg-aufnr MODIF ID m9,
srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
pse RADIOBUTTON GROUP radi,
bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
MODIFIED*******************
INITIALIZATION.
V_REPID = sy-repid.
MODIFIED*******************
*=========================== Event Blocks
AT selection-SCREEN.
start-OF-selection.
PERFORM get_data USING it_data.
END-OF-selection.
PERFORM build_alv USING it_data t_heading.
*=========================== Subroutines
*& Form get_data
Gets the information to be shown in the report.
FORM get_data USING t_data TYPE tp_tbl_data.
SELECT msegmblnr msegmatnr mardwerks mardlgort mard~lgpbe
msegcharg msegbwart mkpf~budat
msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM mseg
JOIN mard ON mardmatnr EQ msegmatnr
JOIN mkpf ON msegmblnr EQ mkpfmblnr
WHERE mseg~matnr IN smatnr.
ENDFORM. " get_data
*& Form build_alv
Builds and display the ALV Grid.
FORM build_alv USING t_data TYPE tp_tbl_data
t_heading TYPE slis_t_listheader.
ALV required data objects.
DATA: w_title TYPE lvc_title,
w_comm TYPE slis_formname,
w_status TYPE slis_formname,
x_layout TYPE slis_layout_alv,
t_event TYPE slis_t_event,
t_fieldcat TYPE slis_t_fieldcat_alv,
t_sort TYPE slis_t_sortinfo_alv.
REFRESH t_fieldcat.
REFRESH t_event.
REFRESH t_sort.
CLEAR x_layout.
CLEAR w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
2 'MATNR' 'MATNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
3 'WERKS' 'WERKS' 'MARD' space space space space space space
space space space space space space t_fieldcat,
4 'LGORT' 'LGORT' 'MARD' space space space space space space
space space space space space space t_fieldcat ,
5 'LGPBE' 'LGPBE' 'MARD' space space space space space space
space space space space space space t_fieldcat ,
6 'CHARG' 'CHARG' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
7 'BWART' 'BWART' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
8 'BUDAT' 'BUDAT' 'MKPF' space space space space space space
space space space space space space t_fieldcat,
9 'MENGE' 'MENGE' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
10 'MEINS' 'MEINS' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
11 'KOSTL' 'KOSTL' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
12 'AUFNR' 'AUFNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
13 'RSNUM' 'RSNUM' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
14 'ENDKZ' 'ENDKZ' 'COWB_COMP' space space 'select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
Layout
x_layout-zebra = 'X'.
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event.
Events
PERFORM set_events USING t_event.
GUI Status
w_status = ''.
User commands
w_comm = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
PERFORM set_order USING 'MBLNR' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = V_REPID
it_fieldcat = t_fieldcat
is_layout = x_layout
it_sort = t_sort
i_callback_pf_status_set = w_status
i_callback_user_command = w_comm
i_save = 'X'
it_events = t_event
i_grid_title = w_title
TABLES
t_outtab = t_data
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " build_alv.
*& Form set_top_page_heading
Creates the report headings.
FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
t_events TYPE slis_t_event.
DATA: x_heading TYPE slis_listheader,
x_event TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.
*& Form set_events
Sets the events for ALV.
The TOP_OF_PAGE event is alredy being registered in
the set_top_page_heading subroutine.
FORM set_events USING t_events TYPE slis_t_event.
DATA: x_event TYPE LINE OF slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
ENDFORM.
*& Form set_order
Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname = p_tabname.
x_sort-UP = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM. "set_order
*& Form set_fieldcat2
Adds an entry to the field catalog.
FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname
p_ref_tabname
p_outputlen p_noout
p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
p_hotspot p_showasicon p_checkbox p_edit
p_dosum
t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-HOTSPOT = p_hotspot.
wa_fieldcat-CHECKBOX = p_checkbox.
wa_fieldcat-ICON = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given is a data
*element.
If p_ref_tabname is given, the ref_fieldname given is a field of a
*table. In case ref_fieldname is not given, it is copied from the
*fieldname.
IF p_ref_tabname IS INITIAL.
wa_fieldcat-rollname = p_ref_fieldname.
ELSE.
wa_fieldcat-ref_tabname = p_ref_tabname.
IF p_ref_fieldname EQ space.
wa_fieldcat-ref_fieldname = wa_fieldcat-fieldname.
ELSE.
wa_fieldcat-ref_fieldname = p_ref_fieldname.
ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF NOT p_edit IS INITIAL.
wa_fieldcat-INPUT = 'X'.
wa_fieldcat-EDIT = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM. "set_fieldcat2
*& Form top_of_page
Called on top_of_page ALV event.
Prints the heading.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'TRVPICTURE04'
it_list_commentary = t_heading.
ENDFORM. " alv_top_of_page
*& Form user_command
Called on user_command ALV event.
Executes custom commands.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
case sy-ucomm.
WHEN '&DATA_SAVE'.
LOOP AT IT_DATA INTO WA WHERE ENDKZ = 'X'.
IF WA-ENDKZ = 'X'.
*******MODIFIED*********************************
U DELETE THIS CODE N USER UR INSERT CODE TO CHECK
SY-MSGV1 = WA-MBLNR. " U CAN DELETE
SY-MSGV2 = WA-MATNR. " U CAN DELETE
MESSAGE ID 'BC_BOR' TYPE 'I' NUMBER '888' " U CAN DELETE
WITH SY-MSGV1 SY-MSGV2. " U CAN DELETE
*******MODIFIED*********************************
INSERT ZTABLE.
ENDIF.
endloop.
ENDCASE.
ENDFORM. "user_command
this is my code, database will stored in fields only.data is empty,
how to slove that one,send any sugestion.Hi Lakshmi,
Can u explain briefly what is ur requirement. U mean to say that after clicking the checkbox in data base table or Screen?
Regards,
Jayaram... -
Data Not loaded from ap_invoice_lines_interface to the base table
Hi ,
Please I'm working on Interface which load invoices from Cobol system to oracle , anyway procedure is working on fine & all data is loaded to the interface as i'm inserting 4 attributes which is DFF on the invoice line level
Now when i ran the import program all data is loaded to the base table except one of the attributes isnot loaded .
will anyone tell me what is the reason or how can i trace that ..........
Thanks In AdvanceDear All ,,,,
Please i got it's a matter of size of the attribute1 segment i increased it ,,,,,,,,,but now the issue that data is saved in the base table but not showing in the screen
will you please help me in that
Edited by: miro_feps on May 21, 2012 1:01 AM -
How to stored data after clicking check box save in data base table
TABLES:mseg,mard,mkpf.
TYPE-POOLS:slis.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
smatnr FOR mseg-matnr MODIF ID m2,
swerks FOR mard-werks MODIF ID m3,
slgort FOR mard-lgort MODIF ID m4,
slgpbe FOR mard-lgpbe MODIF ID m5,
scharg FOR mseg-charg MODIF ID m6,
sbwart FOR mseg-bwart MODIF ID m7,
skostl FOR mseg-kostl MODIF ID m8,
saufnr FOR mseg-aufnr MODIF ID m9,
srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
pse RADIOBUTTON GROUP radi,
bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
DATA:BEGIN OF itab OCCURS 0,
mblnr LIKE mseg-mblnr,
matnr LIKE mseg-matnr,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
lgpbe LIKE mard-lgpbe,
charg LIKE mseg-charg,
bwart LIKE mseg-bwart,
budat LIKE mkpf-budat,
menge LIKE mseg-menge,
meins LIKE mseg-meins,
kostl LIKE mseg-kostl,
aufnr LIKE mseg-aufnr,
rsnum LIKE mseg-rsnum,
checkbox TYPE c,
END OF itab.
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv,
gw_fieldcat TYPE slis_fieldcat_alv,
gt_layout TYPE slis_layout_alv.
START-OF-SELECTION.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO TABLE itab FROM
mseg JOIN mard ON mardmatnr EQ msegmatnr
JOIN mkpf ON msegmblnr EQ mkpfmblnr
WHERE mseg~matnr IN smatnr.
IF sy-subrc EQ 0.
SORT itab BY matnr.
PERFORM display_alv_output.
ENDIF.
*& Form display_alv_output
text
--> p1 text
<-- p2 text
FORM display_alv_output.
REFRESH gt_fieldcat.
gw_fieldcat-fieldname = 'MBLNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 1.
gw_fieldcat-seltext_m = 'material document'.
gw_fieldcat-key = 'x'.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MATNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 2.
gw_fieldcat-seltext_m = 'material'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'WERKS'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 3.
gw_fieldcat-seltext_m = 'plant'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'LGORT'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 4.
gw_fieldcat-seltext_m = 'storage location'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'LGPBE'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 5.
gw_fieldcat-seltext_m = 'storage bin'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'CHARG'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 6.
gw_fieldcat-seltext_m = 'Batch number'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'BWART'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 7.
gw_fieldcat-seltext_m = 'Movement Type (Inventory Management)'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'BUDAT'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 8.
gw_fieldcat-seltext_m = 'Posting Date in the Document'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MENGE'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 9.
gw_fieldcat-seltext_m = 'QUANTITY'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MEINS'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 10.
gw_fieldcat-seltext_m = 'Basic unit of measure'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'KOSTL'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 11.
gw_fieldcat-seltext_m = 'Cost center'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'AUFNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 12.
gw_fieldcat-seltext_m = 'Order Number'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'RSNUM'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 13.
gw_fieldcat-seltext_m = 'Number of Reservation / Depe'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-col_pos = 14.
gw_fieldcat-fieldname = 'CHECKBOX'.
gw_fieldcat-seltext_m = 'Compltd'.
gw_fieldcat-checkbox = 'X'.
gw_fieldcat-edit = 'X'.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'ZREPORT'
IS_LAYOUT = gt_layout
IT_FIELDCAT = gt_fieldcat
TABLES
t_outtab = itab
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ENDFORM. " display_alv_output
this is mycode .
send me replay.Hi Lakshmi,
Can u explain briefly what is ur requirement. U mean to say that after clicking the checkbox in data base table or Screen?
Regards,
Jayaram... -
how do i knw the views base table...
i can view text from user_source
but i there any dictionary table which show view name and base table name..?Hmm , jsut a note to mention that you may use , v$fixed_view_definition also.
For example,
SQL> select view_definition
2 from v$fixed_view_definition where view_name=’V$LOG’;
VIEW_DEFINITION
select GROUP# , THREAD# , SEQUENCE# , BYTES , MEMBERS , ARCHIVED , STATUS , FI
RST_CHANGE# , FIRST_TIME from GV$LOG where inst_id = USERENV(’Instance’)
SQL> select view_definition
2 from v$fixed_view_definition where view_name=’GV$LOG’;
VIEW_DEFINITION
select le.inst_id, le.lenum, le.lethr, le.leseq, le.lesiz*le.lebsz, ledup, decod
e(bitand(le.leflg,1),0,’NO’,'YES’), decode(bitand(le.leflg,24), 8, ‘CURRENT’,
16,’CLEARING’, 24,’CLEARING_
CURRENT’, decode(sign(leseq),0,’UNUSED’, decode(sign((to_number(rt
.rtckp_scn)-to_number(le.lenxs))* bitand(rt.rtsta,2)),-1,’ACTIVE’,'INACTI
VE’))), to_number(le.lelos), to_date(le.lelot,’MM/DD/RR HH24:MI:SS’,'NLS_CALENDA
R=Gregorian’) from x$kccle le, x$kccrt rt where le.ledup!=0 and le.lethr=rt.rtnu
m and le.inst_id = rt.inst_id
SQL>HTH
Aman.... -
ORA-01776: cannot modify more than one base table through a join view
I have created EO based on a database view than consists of two tables, and only one is updateable.
When I try to update a row using EO, I got a following message: "ORA-01776-cannot modify more than one base table through a join view"
In Forms, this issue is resolved by setting "Query Only" property of non-updateable items to "True".
Is it possible to do something like that in ADF BC?
ThanksThanks for answer.
When I set "updateable" property to "Never", that attribute is protected from any change.
I'm sorry for incomplete usecase.
I have set up a list of value on that attribute, because it is a lookup field for another table and I need to get an ID from that table.
Basically, I need that attribute to be updateble for BC, but not for database.
Edited by: MarioK on Oct 13, 2011 9:28 AM -
Cannot modify more than one base table through a join view
hi guys, my current problem is that i have a datablock based on a view, now all the fields bar 1 are updateable, but this one field that is obtained through a join is displayed, the user can enter data in this field which then pupulates other fields which are required, but this specific field should not be updated. Is there an option to state this as i keep getting the error:
cannot modify more than one base table through a join view
Any help would be greatly appreciated, thanks.the user can enter data in this field which then pupulates other fields So, using the value of "this field" you then query the rest of the fields? Can you show us the code you use to populate the rest of the fields?
but this specific field should not be updatedHave you tried setting the "Query Only" property of the field to "Yes" and the other DML properties (Ins, Upd, Del) to No?
Also, what is your Forms version?
Thanks,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly. -
Create a materized view without primary key constraint on the base table?
Hi
I tried to create a materized view but I got this error:
SQL> CREATE MATERIALIZED VIEW TABLE1_MV REFRESH FAST
START WITH
to_date('04-25-2009 03:00:13','MM-dd-yyyy hh24:mi:ss')
NEXT
sysdate + 1
AS
select * from TABLE1@remote_db
SQL> /
CREATE MATERIALIZED VIEW TABLE1_MV REFRESH FAST
ERROR at line 1:
ORA-12014: table 'TABLE1' does not contain a primary key constraint.
TABLE1 in remote_db doesn't have a primary key constraint. Is there anyway that I can create a materized view on a base table which doesn't have a primary key constraint?
Thanks
LizHi,
Thanks for your helpful info. I created a materialized view in the source db with rowid:
SQL> CREATE MATERIALIZED VIEW log on TABLE1 with rowid;
Materialized view log created.
Then I created a MV on the target DB:
CREATE MATERIALIZED VIEW my_schema.TABLE1_MV
REFRESH FAST
with rowid
START WITH
to_date('04-25-2009 03:00:13','MM-dd-yyyy hh24:mi:ss')
NEXT
sysdate + 1
AS
select * from TABLE1@remote_db
SQL> /
CREATE MATERIALIZED VIEW my_schema.TABLE1_MV
ERROR at line 1:
ORA-12018: following error encountered during code generation for
"my_schema"."TABLE1_MV"
ORA-00942: table or view does not exist
TABLE1 exists in remote_db:
SQL> select count(*) from TABLE1@remote_db;
COUNT(*)
9034459
Any clue what is wrong?
Thanks
Liz -
Assigning a Value to a Base Table BLock Field
hi,
I have a form in which a block is a base table block . i need to change the value of a field. currently it shows the value of a field from the Table on which the block is based . I need to change the value of that field to display some other value of another table.
i have a written select statement like this
select name into vname from ws_emp where ecode = 101
then i have assigned to this base table field
:bt_person.ti_v_name := vname;
this i have created in the base table blocks Post query
but it is not assigning value
pls correct me and suggest me if there is any other better method to do this
SaravThat SHOULD work in the Post-Query trigger of the block, but doing that is never a good idea. By replacing a base-table field with any value, it causes Forms automatic processing to lock the row immediately, so no other person running your form can call up the same data. And it causes Forms to think you need to update the record, so the record's status is changed to 'CHANGED' from 'QUERY'.
It would be better to create a non-base-table field in the block, and put the name into that field. -
Hi
I am trying to create a view.
Chosing a sap table fo ex: likp
and a customized table activated which is having a customized field with curr reference field as waerk of vbak (reference table).
Now while i am activating the view i have an error : the customized table is not a base table
please le tme know what is a base table and how can i successfully create my view .
thanks in advance
points will be awarded
vgmnmHi,
Try to create a view on normal application tables , and dont include any customizable table as base table in view creation. because those customizatable table can be maintained through SPRO only. So it wont allow you to include that in the view creation.
Regards,
Naveen -
How to know who has created a particular record in the data base table
Hi All...
Can any one tell me how to track the information about who has entered the records in to the data base table....
Thanks in advance...You could check the Created By and Created On fields if your tables contains these fields.
OR
You could check the table DBTABLOG if table logging is enabled for the table
OR
You could check the Change document tables CDHDR and CDPOS.
-Kiran
Please mark useful answers -
Data is visible in base tables of BOM routing but not visible in front end
Hi,
Through BOM_RTG_PUB API I am populating routing data into base tables, it is successfull.. but that data is not visible in front end when i queried from front end..
i am getting error while i run API as......
An error occured while processing business object BOM_ITEM12 in organization MMO. Please check the data in this business object and re-run the import process.
Can any one help me in finding out what's wrong with this..
Thanks in advance..
Edited by: 875417 on Feb 6, 2012 10:49 PMYour obeservation is correct, and expected behavior.
This behavior is useful when you have inputs that you would like to set as defaults for the user.
Obviously, if there is a value to be saved, it will require some memory to store the value.
If the input is left empty by default, that memory is made available again.
It may not be easy to think of a good use for this for a graph, but think about for numeric or string controls.
What if the user isnt sure how they should input a certain parameter or value?
You could store a default value so they could see how they should input their value.
Message Edited by Cory K on 09-15-2009 11:12 AM
Cory K -
Creation of field in data base table
Hi,
I want to create a field in data base table , which holds the float values but i don't want to use the FLTP data type, why bcoz if i use this data type in selection screen of the table the the field is not appeqring, i dont want to go for the option QUAN bcoz there i need to define the ref table and ref field.
please explain what is the way to create this field.
regards
KrishnaUse NUMC
Awrd POints if useful
Bhupal -
Dear All,
I have created a materialized view which refreshes on commit.materialized view is enabled query rewrite.I have created a materialized view log on the base table also While inserting into the base table it takes lot of time................Can u please tell me why?Dear Rahul,
Here is my materialized view..........
create materialized view mv_test on prebuilt table refresh force on commit
enable query rewrite as
SELECT P.PID,
SUM(HH_REGD) AS HH_REGD,
SUM(INPRO_WORKS) AS INPRO_WORKS,
SUM(COMP_WORKS) AS COMP_WORKS,
SUM(SKILL_WAGE) AS SKILL_WAGE,
SUM(UN_SKILL_WAGE) AS UN_SKILL_WAGE,
SUM(WAGE_ADVANCE) AS WAGE_ADVANCE,
SUM(MAT_AMT) AS MAT_AMT,
SUM(DAYS) AS DAYS,
P.INYYYYMM,P.FIN_YEAR
FROM PROG_MONTHLY P
WHERE SUBSTR(PID,5,2)<>'PP'
GROUP BY PID,P.INYYYYMM,P.FIN_YEAR;
Please help me if query enable rewrite does any performance degradation......
Thanks & Regards
Kris
Maybe you are looking for
-
Tried to Sync my ipod classic through itunes 11.2 on my new vaio laptop
Haviing tried everything from restoring multiple times, to resetting to jumping on one leg and crossing my fingers nothing has worked I got a new laptop, tranferred all my music, got the latest version of itunes 11.2, restored my ipod so it would syn
-
How to find package owning a certain file?
Hi, I'm trying to download a source code from git and got the following error message gpg: error while loading shared libraries: libgcrypt.so.20: cannot open shared object file: No such file or directory Clearly it's not able to find the file "libgc
-
Cannot connect I-Pad to Router
I had to reset my I-pad and lost the router connection. I did not remember the password for my router, so I went in and changed it. When I go to Settings-Wi-Fi and see the network and type in that new password...it won't let me connect to the route
-
Need help changing the setting to preview entire file names
Using Leopard, I would like to to be able to read the entire name of a file. For example, my files might say (File 2.....609). What the file is named is File 2 Graphs 6209. How can I set up Leopard to allow me to read the entire file, so I don't have
-
WRT54GL New Installation Issues
I recently installed the WRT54GL. This a new installation. I currently have two problems. The first issue is the router is not allowing the local PC to connect to the internet even though the router is directly connected to the PC. How do I conn