PEMInputStream with thin client

I am trying to get around using the weblogic.jar for my Weblogic client. I would
like to use the
wljmsclient.jar and wlclient.jar in order to make my client carry less weight.
However, I need to
use the PEMInputStream in order to perform my 2 way SSL. The only place that
I've seen this
PEMInputStream class is in the big, bulky jar. Does anyone have any suggestions?
Thanks in advance,
Joel

"Joel" <[email protected]> wrote in message
news:3edbc4c6$[email protected]..
>
I am trying to get around using the weblogic.jar for my Weblogic client.I would
like to use the
wljmsclient.jar and wlclient.jar in order to make my client carry lessweight.
However, I need to
use the PEMInputStream in order to perform my 2 way SSL. The only placethat
I've seen this
PEMInputStream class is in the big, bulky jar. Does anyone have anysuggestions?
>
I believe 8.1 has an iiop thin client that can use sun jsse.

Similar Messages

9iFSRe2 + API + connect with thin-Client

Hi,
I progam the iFS-APi to connect the iFS.
But under Windows i must install about 100MB.
Under Linux the size of libs i need to connet
about 10MB.
My Question is can i connect the iFS with
thin-Client dll?
thanks for Answer
bye

Place some debugging code and see if URL is null. Also, although it is nice practice, you don't need to catch every type of exception. Try (no pun intended):
catch (Exception e) {
System.err.println(e.getClass().getName() + ":" + e.getMessage());
- Saish
"My karma ran over your dogma." - Anon

Mac Pro with thin clients

Hello,
I am looking for a configuration of a Mac Pro server with thin clients so that software and data is centralized on one location.
Is that possible with Mac OS X ? And does Apple have thin clients ?
Hubert

I have the same question. I am about to buy a Mac Mini with Leopard server, if I can connect thin clients to it. I have good old PCs with Win and Linux, I want to use them as thin clients

Cx_Oracle dosen't work with Thin Client

Is there an alternative to the Fat- & Thin-Client installation to get cx_Oracle running.
I would like to tell my custommersomething like "install Addon XY in addition to the Thin-Client akording to the Oracle Vresion you are using."
I Know of the possibility to enhance a Thin-Clinet installation by copying certain files and folders from the server.
But our Application should work for manny custommers, with different Oracle-Versions. And we just can't expect a DBA
to let him do all needed Steps to get cx_oracle running.
Anny Idea?
Thanks

AFAIK with the same cx_Oracle's source code you can build versions for different oracle's clients (at least in my experience it always asked me my $ORACLE_HOME and $LD_LIBRARY_PATH and the setup.py handles different oracle's version). It might work with 9i, 10g and 11g (I wouldn't risk to talk about 8i).
Besides that Oracle instant client is free to distribute (see here) so you can bundle it with your code. I can imagine it would be pretty easy to build it in *unix although I'm not sure bout Windows -for lack of experience with that particular OS-.

HPDM using WOL with thin clients using WES8

When using HPDM 4.6 with t620 clients using WES8, the Wake on LAN option does not work.It makes it impossible to do settings and deployments outside office hours.How can this be fixed?

Hi,
Thin clients normally have a low memory allocation on the video card (8mb to 16MB) so this can be a problem. Check to see if you can change this in the BIOS on the WYSE. If not connect at 256 Colours to reduce this. If you have pictures linked to products then their resolution will not be good but for SAP itself the difference is small. Also rename the SAPSS.AVI to .old if you have not already done so so that the splash screen does not come up when logging in.
In my multimedia testing on thin clients, unrelated to SBO, I found that both memory and processor power made a huge difference, which is contrary to thin client manufacturer claims. As an example I used a 200MHz/64MB TC for a flash application and sound was about 3 seconds behind the image and the image update would skip 3 to 5 frames when updating. Moving to a 800Mhz/128MB TC The frame refresh rate was almost perfect and the sound was only about 0.5 seconds behind. I would therefore test on a more powerful thin client to see if it improves performance.
The S30 is a 400MHz (rated @ 533 on performance by AMD). Try a 1GHz TC with the maximum Video memory you can find.
We are currently using VXL Itona 800Mhz/128MB and do not experience too much rolling but we are using 256 colours.
Hope this helps.

Problem in Using Oracle with Thin Clients(Image) Technology

I am running Oracle on Server and mine clients are thin clients.I have image on Oracle Server from where I am booting thin clients.The Problem I am facing is when I use single Thin client then everything works but as I starts using more than one thin client mine I got the error rwrun60 and it gives the that close or ignore message.I am using run_product for running reports.Then I tried to use run_report_object but how can I pass paramater using run_report_objects

i m not getting much from what you are saying.... but i found something.i created a windows application and then was able to create a dataset from ODAC connection to oracle. then dragging the dataset on windows form... i was able to create a data grid containing the data. hittin F5 the app was running successfull. however when tryin to do same in asp.net...when configuring the data source using sql datasource it gave me following error ...
ORA-00942: table or view does not exist
help help

Make a test with thin client

Hi all,
I'm facing a strange boring problem. I've a tomcat runs a webapp that using thin client connects to a remote DB.
From about a week is not able to connect anymore. Java hangs and report this error:
java.sql.SQLException: Io exception: Connection reset
So I've no firewall and listener is correctly working. Telnet to listener is working.
Does anyone has a simple java class to run to make a connection test?
Thanks
Stefano

Use preparedStatement either like this
String query = update tableName set datefield= TO_DATE(?, 'YYYY-MM-DD HH24:MI') where id= ? ";
and setString(1, string);
or
String query = "update tableName set datefield= ? where id= ?";
and setTimestamp() or setDate () depends what you need in your date field .
Bets regads Alexey.

Which would be the best NAC approach with thin clients up today?

Hello guys,
Which would be the best NAC approach using CAM/CAS infrastructure for thin clients? I guess nac agent is still not supported on thin clients/virtual desktops right?
Would mac address authentication be the best option?
Regards,
Emilio

Hello guys,
Which would be the best NAC approach using CAM/CAS infrastructure for thin clients? I guess nac agent is still not supported on thin clients/virtual desktops right?
Would mac address authentication be the best option?
Regards,
Emilio

Having trouble with thin client

Hello all,
First of all, I appologize if I post in the wrong section. So please, just move it where suitable.
I have HP T5000 Thin Client and I would like to connect it to a desktop computer that runs Windows Multipoint Server 2012. My problem is that it doesn't accept IP address sent by router. If I enter parameters manualy, it still can't see other computers in network. Does this mean that something failed or that I have to setup something else.
Also, would you be so kind as to suggest what would be the best option for this device - which server to connect it to and in what way?
Thank you very much in advance.
Isidora

Ugljesic, welcome to the forum.
I believe that you will get more responses if you start a thread here. They are the members who know more about your Thin Client.'
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

ACS + VMWare thin clients with dynamic vlans

Good afternoon,
I need to deploy a solution with thin clients and dynamic vlans (802.1x). All switches are catalyst 3560 and superior
Can I do this using only de ACS? Will it work?
Thank you

Hi,
Dynamic Vlan assignment can be configure on the ACS.
Please see the configuration example on the link below, this configuration example is for WLC but the ACS configuration is the same.
http://tinyurl.com/2oxg32
If you have any doubts do not hesitate to contact me

Trouble running MSS reports on thin clients

Does anyone know if it is a known issue that Running reports in EP 6 might not work in thin clients?

This had nothing to do with thin clients it was a trusted sites issue.

Thin Client and Mac Server OS

Where would I go to see if it is possbile to run an os server like an application server with thin clients loggin on to different profile.

Using a GUI? no.
Mac OS X supports multiple users logged into a server, but only one active GUI session - the others are limited to shell-based logins.
I recall something about some company doing something along these lines via some kind of VNC interface, but I don't recall the specifics.

Database connection encryption and integrity with ColdFusion and Oracle thin client

As ColdFusion datasource we are using the Oracle thin client to connect with the database. So, basically we are using a JDBC URL such as jdbc:oracle:thin:@... and as Driver Class oracle.jdbc.OracleDriver. This works successfully however we would like to set encryption and integrity parameters as well. In Java this is done similarly by setting a Properties object prior to getting a connection as follows:
Properties prop = new Properties();
prop.put("oracle.net.encryption_client", "REQUIRED");
prop.put("oracle.net.encryption_types_client", "( DES40 )");
prop.put("oracle.net.crypto_checksum_client", "REQUESTED");
prop.put("oracle.net.crypto_checksum_types_client", "( MD5 )");
OracleDataSource ods = new OracleDataSource();
ods.setProperties(prop);
ods.setURL("jdbc:oracle:thin:@localhost:1521:main");
Connection conn = ods.getConnection();
Is there a way that I can pass these parameters to the ColdFusion datasource. Ideally, I would love to do this centrally in such way that a change to all the cfquery or cfstoredproc is not needed.
I also know that in application servers such as Oracle AS there is an option when creating a datasource which says "Add Properties". In there you can add such properties. So, I was thinking of maybe creating a JNDI DS in the app. server and then magically connecting to it but this may have some impacts on the app.
Besides this I was also thinking of communicating with the CF datasource through the CF admin API (cfide.adminapi.administrator) and also the option of extending the Oracle driver so that when CF connects with it these params are already set.
I would love to have your professional opinion and suggestions on this.

I believe the thin driver actually needs the IP address (not the DNS name). Also, is "java" the name of the Oracle instance to which you are trying to connect?
Try the following:String driver = "jdbc:oracle:thin";
String dbIP = "W2RZ1NXG01's IP address";
String dbPort = "1530";
String dbSid = "java";
String dbUser = "Admin";
String dbPswd = "apassword";
String cnctStr = driver + ":@" + dbIP + ":" + port + ":" + dbSid;
try
    Class.forName("oracle.jdbc.driver.OracleDriver");
    con = DriverManager.getConnection( cnctStr, dbUser, dbPswd );
    stmt = con.createStatement();
    stmt.executeUpdate(createString);
    stmt.close();
    con.close();
catch(SQLException ex)
    System.err.println( "The following SQLException occurred: " + ex );
    System.err.println( "Message: " + ex.getMessage() );

Issue with non-english application in thin client - virtual directory issue

Hi,
I have just completed Siebel 8 installation on solaris machine along with SunOne Web server 6.1.
I have installed both ENU and ARA language packs for Siebe Enterprise, Sweapps.
The issue is after installation and repository installation for both ENU and ARA, I am able to open only ENU applications in thin client.
When I try to open the ARa applications the browser gives "Page not found" error.
I have verified first, whether the Siebel components running or not. Confirmed that for example for Callcenter SCCObjMgr_ara component is active and online.
But what I observed is, in SUNOne web server instance's config folder, there is a file obj.conf.
In this file there are entries for only enu applications like,
NameTrans fn="pfx2dir" from="/callcenter_enu" dir="/siebelapp/sweapp/public/enu"
There are no links for ARA applications.
I think this could be the reason for issue.
But while installing and configuring sweapps, I have selected the logical profile location as "/siebelapp/gtwysrvr/admin/Webserver".
So this should create such links in obj.conf for ARA as it created for ENU apps. But it didn't happend.
Please advise, how to get the ARA applications.
Thanks
Vamshi
Edited by: user4619223 on Mar 23, 2010 11:36 AM

I see some message about a proxy. Have you checked that you can use the proxy from you network?
If not you should turn the proxy off.
Timo

ASO - checksum fail with JDBC thin client on Windows

I'm trying to configure Oracle Advanced Security for SQL Developer. I'm using SQL Developer 1.5.1 (downloaded with the included JDK). When configuring the connection I select Connection Type: Advanced. My JDBC URL is:
jdbc:oracle:thin:@(description=(address=(protocol=tcp)(host=hostname.com)(port=1234))(connect_data=(service_name=DVLP)(SQLNET.ENCRYPTION_CLIENT=REQUESTED)(SQLNET.ENCRYPTION_TYPES_CLIENT=AES256)(SQLNET.CRYPTO_CHECKSUM_CLIENT=REQUESTED)(SQLNET.CRYPTO_CHECKSUM_TYPES_CLIENT=MD5)))
This works great in Linux. But on a fully patched Windows XP machine when I try to connect I get "Io exception: Checksum fail Vendor code 17002"
Note that this is only a problem with the thin client. If I use the OCI client (jdbc:oracle:oci:@....) it works fine.
Also note that the db to which I'm trying to connect is a 10g database with these sqlnet.ora parameters:
#ASO Encryption
sqlnet.encryption_server=required
sqlnet.encryption_client=required
sqlnet.encryption_types_server=(AES256,3DES168,3DES112)
sqlnet.encryption_types_client=(AES256,3DES168,3DES112)
#ASO Checksum
sqlnet.crypto_checksum_server=requested
sqlnet.crypto_checksum_client=requested
sqlnet.crypto_checksum_types_server = (MD5)
sqlnet.crypto_checksum_types_client = (MD5)
SQLNET.INBOUND_CONNECT_TIMEOUT_LSNR1251=120
# Require clients to be Oracle 10g or higher
SQLNET.ALLOWED_LOGON_VERSION = 10
Has anyone else seen this?
Thanks for your help!

As a test I created a simple Java program to connect to the db. I used the same ojdbc5.jar that is shipped with sql developer. My test program ran fine. So it would seem the problem is SQL Developer specific.
The class:
import java.sql.*;
public class testJDBC_ASO {
public static void main(String[] args) throws SQLException {
DriverManager.registerDriver (new oracle.jdbc.OracleDriver());
Connection conn = DriverManager.getConnection
("jdbc:oracle:thin:@(description=(address=(protocol=tcp)(host=hostname.com)(port=1234))(connect_data=(service_name=DVLP)(SQLNET.ENCRYPTION_CLIENT=REQUESTED)(SQLNET.ENCRYPTION_TYPES_CLIENT=AES256)(SQLNET.CRYPTO_CHECKSUM_CLIENT=REQUESTED)(SQLNET.CRYPTO_CHECKSUM_TYPES_CLIENT=MD5)))",
"username", "password");
Statement stmt = conn.createStatement();
ResultSet rset = stmt.executeQuery("select BANNER from SYS.V_$VERSION");
while (rset.next())
System.out.println (rset.getString(1)); /
stmt.close();
The output:
C:>java -cp ojdbc5.jar;. testJDBC_ASO
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for Solaris: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
Edited by: RichardJQ on Oct 31, 2008 1:52 PM

PEMInputStream with thin client

Similar Messages

Maybe you are looking for