Pen and Touch with Photoshop CC Syncronization Problem

So, I just recently bought a drawing tablet to use while painting in Photoshop. It works perfectly for everything except when it comes to Photoshop. The program knows that I want to paint with the paintbrush tool, it repsonds, and it even recognizes the pressure I put on the tablet, but it doesn't do it in sync with the cursor...Whenever I use the paintbrush tool, the "paint" doesn't come out of the cursor, but up and to the left of it.
For example, If I were to try and put a single dot in the middle of the page using the paintbrush tool, I would move the cursor in the direct middle, press down, and the dot would appear towards the top left of where I touched.
I am mostly sure that this is NOT a problem with my tablet because I already updated the driver and I tested it out on every other program. The only time the problem occurred was when I went to Photoshop CC and used the paintbrush tool...every other tool in perfectly in sync with the cursor.
Something that I noticed about the program, however, is that whenever I am not in the Photoshop window, the cursor is in the normal place that I am holding it, but right once I click on my Photoshop window, it moves the cursor down and to the right.
I am not sure if this is a problem with the brush settings or something of that matter, but I know that it has nothing to do with my computer or my tablet.
Tablet is a Huion (cheap, I know...but I'm a poor college student)
Photoshop CC is the latest version, and I already tried reinstalling it with no solution.
I would be highly grateful for some help.
Thanks

I have the complete and most up to date driver. I checked three times and it told me that I had the latest possible driver.
I am using Windows 8 64bit, i7 processor, 8gm ram.
I have just the screen on my laptop, no external monitors or projectors.
I don't know about the calibration, I just set the tablet's "touchpad" size that I was using relative to the size of where I wanted it position and with the resolution of my screen (but I tried this and still encountered the problem with default settings just to make sure the readjustment wasn't causing the problem)
If there is a way to calibrate this tablet, I have no idea how. (The instructions are in terrible broken English and they make close to no sense when I try to read them anyway)
If it is a driver problem, I really don't know what would be wrong or how to fix it.

Similar Messages

So, I'm trying to install my Photoshop Elements 7 that I got with my Bamboo Pen and touch.... Serial number, lost codes.

Yep, as the topic says, I need help. is there any way at all that I can get a code for my photoshop Elements 7 so I could use it again? I have the CD right here with me it came in a Bamboo Pen and Touch set a long time ago as part of a software package and I was younger then so I didn't exactly register up with adobe or anything.... Please any help would be great! I'd really like to start drawing again.

It isn't likely that much can be done since you appear to have no proof of ownership. In any case, you need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here is a link to a page with options to help make contact:
http://www.adobe.com/support/download-install/supportinfo/

Wacom Bamboo Pen and Touch killed my Photoshop

I have a new laptop with Win 7 64 bit and Photoshop has been working awesome for the past week and half since I got the computer. I installed a brand new Wacom Bamboo Pen and Touch tablet and now Photoshop won't open.
I get a message 'Adobe Photoshop has stopped working' before the program even loads. I downloaded the latest drivers from Wacom and installed those and no change.
Any ideas?

Im new here and this is the problem I searched for.... I have a new
CS5 and it killed my 10 yr ols Wacom so I bought a ba
mmboo and it killed THAT one too... My orig Wacom still works on my other
system XP and Photoshop 7 just fine . The BAamboo touch died in 4 hrs and the pen in 6hrs... Im talking with Wacom but they are ametures there, I think. SOMEONE a couple yrs ago had me change my XP Wacom driver because I was getting RF problems when I was too close to the screen.... Wish I could find THAT person. IDEAS?? ..sed

X201 pen and touch are kind of messed up since update

Hi guys,
few days ago i updated my system (x201 tablet w/ multitouch) with lenovo's update utility and installed all the normal windows7 updates. And a lot was messed up since then. most of it i could fix with google, or re-installing the drivers.. but here are two things i couln't fix, and I hope someone could help.
Note: I've got the latest drivers installed and re-installed them several times.
Before I start here are some changes I recognized.
In my Systempanel under the category "Hardware and Sound" there are two new things wich wasn't there before. One is called "Touch-Properties" and the otherone "Pen Tablet-Properties".
1.)
I am not able to re-calibrate my touchscreen. If I do it as I was used to following happens:
- I am opening "Tablet PC-Properties" from the system Panel -> Hardware and sound.
- pressing "calibration" for Touch
- I get the error Mesage: "A supportet touchscreen was not found on the system."
Multitouch is still working. but is a little off. So I wish i could calilbrate it.
2.)
My Pen behaves like a mouse. Wich means the eraser does not work. And the pen-button behaves differently. When I press the button while i am hovering over the screen. It produces a right click.
When I am pressing the pen down, no right click circle appears.
Anyway, when I want to calibrate my pen following happens:
- I am opening "Tablet PC-Properties" from the system Panel -> Hardware and sound.
- pressing "calibration" for pen
- the "Pen Tablet-Properties" program opens (same as the new one i mentioned before).
Now i can calibrate my Pen with this new software (which is Version 7.0.2-19 btw.)
In this Program I can change some settings, like:
-- Activate Eraser or how the right-click should behave (hovering or click&touch).
It doesn't matter what i enable or disable, my pen behavoir does not change.
It still behaves like a normal mouse. Which is PRETTY anoying when you use "Journal" or "OneNote".
does anyone has an idea how to fix it? I hope my problem description was kind of understandable and not too confusing :-)
I even tried to downgrade my divers, but i couldn't find any old ones.
best regards
Ben
EDIT:
I ALMOST fixed the pen-problem.
Read somewhere to download the "Tablet-PC" Drivers from WACOM Hompage (isd701-8_int.exe), which i did.
Now at least the pen works like a pen again (which means... eraser and right click now works like it supposed to. BUT:
I am still not able to re-calibrate pen and touch...still get: A supportet touchscreen was not found on the system.
And now "Pen Tablet Properties" is now shown as: "ISD Tablet Properties". And when i try to open it i get an error: "No Tablett driver found".
Solved!
Go to Solution.

Ok. I solved it.
for all who encouter the same stuff here is how I did it:
- deinstall drivers ONCE AGAIN!
(I went to: control panel, deinstall, ISD Tablett drivers, restart)
- Then I deleted the folder "C:\program files\Tablett" in there are the driver remainings which wasn't deleted through the deinstall.
- To be sure I went to Hardware-Manager. On the top there was an unknown device, wich is the just deinstalled Wacom multitouch device. I deinstalled it once again though the Hardware-Manager (which is probably useless... nevertheless this is what I did).
After another restart I installed the newest multitouch drivers (7.02-19) which i downloaded from lenovos homepage... DO NOT USE LENOVOS UPDATE TOOL.. It didn't work for me.
After the install, another quick restart and violá it worked. :-)
Pen and Touch works. I can calibrate everything and can open Touch and Pen preferences in control-panel.
bye

Tm2t. When using High GPU and in secondary landscape, pen and touch react like in landscape

So I just my tm2t and found this odd problem. When Im using the tablet with the High performance GPU and go to secondary landscape the pen and touch react like the screen is in normal landscape. I switch to Low power GPU and the touch and pen is OK. Im so confused and angry!!!
Denis

We uninstalled all the ATI software and disabled the driver/card last year because no matter what we did, this problem could not be resolved. We are mostly mobile and do not need high end graphics. The ATI card gets totally in the way of doing anything mobile and wanting us to exit our apps to switch on/off the GPU - are they crazy?

TouchSmart 1115dx Pen and Touch not working

VI, like many others over the past year or 2, have had significant issues with the "Pen and Touch" going MIA after the 8.1 update. Initially, all was well, but I have been fighting this for the past 2 months--or more. It is showing that there "is no Pen or Touch Device". I have restored, reimaged, re-everything, pulled new updates--found a BIG error in the Blue-tooth setting (wants to install to SW/Seup rather than SW/Setup folder). Even after changing the destination folder to the correct one, it is not working. My Bluetooth AVRCP Device and the HID Consumer Control device are both in the "hidden" category in the Device Manager and the error message in the properties says "not connected-code 45--reconnect to device". Further analysis shows that there are no problems indicated, but the Update Drivers message says "all drivers are up to date", while the Driver Details shows "no drivers required or loaded." Roll-back and disable buttons are unavailable. If this is a mechanical error, I would appreciate information on where it is located and how to access, as -- of course --my machine is no longer under warranty. PLEASE help ASAP! I have been on the phone with HP support, on chat, in the Windows store, etc--we need this fixed quickly as I teach school and love using the touch device in class!

Apple will exchange your iPod for a refurbished for this price:
Apple - Support - iPod - Repair pricing
You can make an appointment at the Genius Bar of an Apple store for this exchange
Apple Retail Store - Genius Bar
http://www.apple.com/retail/geniusbar/or you can sent it to them. For how to send it see:
Apple - Support - iPod - Service FAQ
A third-party place like the following may be less expensive. Google for more places.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Intuos pen and touch and Mavericks...I'm having an issue...

Hi,
I purchased a Mac mini three days ago to replace my trusty old iMac....I installed a brand new Intuos pen and touch, also known and Intuos manga wacom tablet...
I noticed that when the computer boots and ask for my login pass...the pen seems to work on that initial screen, ....as soon as I pass that login screen and the screens is all set up with the icons and everything, and I'm in ...the pen stop responding, and the pointer disappears...then I have to wait about fifteen seconds, I don't know I haven't counted properly. to it to show up again...
SO I wonder why does it become unresponsive for a while and then comes back??? Is there any known issues with this wacom tablet and mavericks?
So I'm wondering what issue I might be having?
Any ideas why this might be happening???
Monica

Check on the manufacturer's web site to see if you can find any information/contact their support.

Can't turn on pen and touch after windows 10 update

Recently updated my HP TouchSmart 320 1030 to Windows 10. Pen and touch isn't working. It does on the log on screen ONLY after the computer turns on, but not after Windows opens! I opened pen and touch in the control panel, it doesn't allow me to even select "Touch Action" to change any settings, only "Double-tap" and "Press and Hold". I went to "Tablet PC Settings" to "Calibrate the screen for pen and touch input", and attempted to "Setup" under CONFIGURE and "Calibrate" under DISPLAY, and in both cases nothing happened when I touched the screen. Basicaly once i'm logged on to Windows NOTHING touchscreen works. I know the touchscreen WORKS (since it works famously at the LOGIN SCREEN), but something with the software once Windows 10 opens? Please help.I did have pen and touch turned off when I was running Windows 7 and then I updated to windows 10 (maybe something to do with it?). Confused.I don't believe it's the updates fault I'm just frustrated it's not letting me turn it on or anything.

Welcome to the discussion area, Adrian!
It's unfortunate and confusing that Apple uses the same name for an internal wireless card on a Mac and a wireless router.
We answer questions on this forum about this AirPort Extreme.
You'll probably get a much faster and more informed response if you also post in the iMac Forum

My acer Aspire V7-481P touchscreen stopped working. I can no longer find the pen and touch settings on my computer, please help.

My acer Aspire V7-481P touchscreen stopped working. I can no longer find the pen and touch settings on my computer, please help, I have tried to download all the drivers on the acer website and it is still not working. The touchscreen previously worked before
but unexpectedly stopped.

touchscreen don't need driver
go to device manager, find Human Interface Device, find HID-compliant touchscreen (maybe under USB input device), try to enable it, click yes and restart PC
If not solved, try to perfrom system restore (back to condition when this PC working fine)
http://acer.custhelp.com/app/answers/detail/a_id/11564/related/1
for more details TS, i suggest contact Acer

Wacom Bamboo Pen and Touch repetitive error when installing

Hi there, I just got a pen and touch tablet. Every time I go to install the software it begins for a second then says there was an error installing and to try again. I've restarted, made sure no other programs were open, but it keeps giving me this every time I try. I sen wacom a message, was hoping to find some help here though. I run a power pc G5, I told myself it could've been the fact that my G5 is in fact outdated and a powerpc, but I'm using my tablet right now on a G5 Mac tower that's also a powerpc, so it's not my processor. Any help or suggestions?

Have you gone to Wacom's support web site to see if there is a more recent version of the driver software?

I have been using iPod touch and iTunes with Windows XP - no problems. I now have a new computer with Windows 7 Home Premium. When I try to sync the iPod with Windows 7 and iTunes it will not transfer all my photographs. What can I do?

When I tried to sync my iPod Touch with my new computer none of the photographs were synced. I use Adobe Photoshop Elements 10. When I did it the first time the photographs were all muddled up in their albums. When I tried to sync again the photographs were all removed. On the third try I received an error message something like 'Unable to sync photographs program cannot be found.' Can anyone help. (It may be to do with Windows 7 and Libraries??)

Did you already try to delete the photo cache? iTunes: Understanding the iPod Photo Cache folder

Had problem with PhotoShop Elements 7 and now with Photoshop 9.

When creating a slideshow the Organizer stops working and closes. What can I do to get back on track?

God knows what but stating your Operating System is a good start here.

Does illustrator cc2014 work with "bamboo pen and touch"?

its an older tablet and im wondering if that might be the issue causing my illustrator to crash at launch

vasiles,
You may have a look here (the requirements are both minimum and maximum):
http://helpx.adobe.com/illustrator/system-requirements.html

Using iPhoto and editing with Photoshop Elements 4

Hello
I am new to Macs after many years using PC and I am struggling to set up my photo workflow. I shoot in RAW format and input into iPhoto from iPhoto I double click on the photo and which opens the RAW editor in Photoshop Elements. After making changes I open the file in Photoshop and then save as a TIFF.
My problem is I do not see the changed and saved file in iPhoto and if I double click on the photo again it opens back up in the RAW editor not as a TIFF.
Can any one point me in the right direction to solve this or is what I am trying to do not possible
Thanks
Grant

Grant
Welcome to the Apple Discussions.
What you're trying to do is not possible.
When you save as a TIFF you create a whole new file that needs to be imported into iPhoto anew. iPhoto will track an edit as long as you stay with the same file - so, edit your jpeg in PSE and use the 'Save' command and the change is reflected in iPhoto. However, you cannot Save RAW files, it's always a Save As... and so the resulting file has to be imported.
Regards
TD

Pressure sensitivity on X230T and trouble with Photoshop

Would anyone know how many levels of pressure sensitivity there are on the X230T?
I ask this because I have just installed Photoshop CS6 and I seem to have many issues sketching. I will be drawwing a series of light lines and then suddenly a big fat line will appear, I will continue sketching and this will happen over and over again.
I am very frustrated since I bought this specifically for Photoshop. Does anyone know why this is happening? I already turned off the "hold pen down to right click" feature, but I continue to have this issue.
Any help would be greatly appreciated.

Maybe this could help:
http://www.howtomakeonline.org/EAiRjMoney7gb1yD/Lenovo-ThinkPad-X230T-Touch-And-Digitizer-Pen-Input....
In this 256 levels of pressure sensitivity are mentioned (which would make sense, because it would point to an 8bit ADC in the digitzer for pressure measurement).
If you don't trust this number (as I would do, because it is mentioned only in one occasion in the web (or google search ;-) )) then you could also check the Wacom site for their more low end products and their specs.
Using x230t (i5-3320M, 8GB RAM, 256GB SSD, 80GB mSata-SSD) and loving it!
"I may not own the world but I own my mind and therefore the world is at my feets." (me)

Pen and Touch with Photoshop CC Syncronization Problem

Similar Messages

Maybe you are looking for