Pen Pressure works.. but not in Cs3? Please help

Hi there
I'm having a problem with the pen pressure dynamics on CS3. They can't be changed.
If I change it to 'pen pressure' I get a little yellow marker next to it which I assume means its not registering or recognizing.
http://i571.photobucket.com/albums/ss154/Peardan/Yellow_error.jpg
The tablet I use is Wacom Intuos (I think its the original) http://i602.photobucket.com/albums/tt110/thedeekin/forsale/Intuos1.jpg
I know for a fact that the pen pressure works because I have a program that tests it.
http://i571.photobucket.com/albums/ss154/Peardan/Stupidthingdunwork.jpg
That blue bar goes up the harder I press so I know its working..
Every method of fixing has been tested:
Driver in the box, Latest drivers, Every driver that was available for download,
Unplug and plug,
Ctrl+Alt+Shift.
10million pc restarts.
It has always worked fine on my old computers which where xp, no problems but I got a new computer with 64bit Windows7.
As far as I can tell its photoshop thats not letting it work. CS3 is fully updated and works great aside from this problem which is stopping everything.
Thanks for the help.
I want to draw..

Ok its fixed! Thanks guys!
Exactly what I did for those who want to know:
Opened photoshop with Ctrl+Alt+Shift and hit the pop up button
I then made the brush settings to normal and not pen pressure and closed it down.
Start -> Control Panel -> Programs/Uninstall a program -> Uninstalled Wacom tablet file
Went onto that link provided http://www.wacom.com/downloads/drivers.php
Selected Intuos GD and Windows 7.
I then downloaded the oldest driver down the bottom (Which apparently was the first one compatable with windows 7)
Installed and accepted the restart notification.
Before I checked Photoshop I opened Paint and tested the pen pressure on various brushes and kept it open
Then opened photoshop and put the settings on pen pressure again and it worked!
Doing it exactly like that was what seemed to get it working propperly.
Thank you again!

Similar Messages

Hi, i just updated my iphone 3gs to iso5 now it will not activate ive ''try again'' alot but not getting anywere please help!!

hi, i just updated my iphone 3gs to iso5 now it will not activate ive pressed ''try again'' alot but not getting anywere please help! i need my phone for work not had it too long and really annoyed lol thanks,

Sorry, but Apple does not provide a downgrade path for iOS.
Because downgrading is unsupported by Apple we cannot discuss it on these forums, but you can use Google to find information on how to install an older version of iOS on any device.
Note that you will void the warranty and loose official support by Apple.
Feel free to let Apple know at http://www.apple.com/feedback
Anyway, give a try resetting all your settings:
Settings > General > Reset > Reset All Settings

My macbook won't start up i have used the option command p r while holding down power button but not done.. please help guys

my macbook won't start up i have used the option command p r while holding down power button but not done.. please help guys

It not polite to repost asking fro more help three minutes after initial post.
Recovery mode is Command & R keys after depressing and releasing the Power button for a normal startup.
OS X: About OS X Recovery - Apple Support
That only works for Lion and later.
What exactly happens when your try to boot to Recovery?
Try starting in Safe Mode resetting the SMC and NVRAM/PRAM
OS X: What is Safe Boot, Safe Mode?
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
What model MacBook Pro and what OSX version was on the Mac?
Have you tried booting from an OSX install DVD?
When you try to start doe the Power light light?
This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

I have purchased adobe pdf pack so i can delete some text from my converted files, this will only let me add text but not delete any, please help

i have purchased adobe pdf pack so i can delete some text from my converted files, this will only let me add text but not delete any, please help

I tyhink that you need ExportPDF, Adobe ExportPDF (read only). In any case, thius may help: Cancel your membership or subscription | Acrobat.com online services

After stopping FF when I restart it , I get a pop up displaying Firefox already running but not responding. Please Help?

After stopping FF when I restart it , I get a pop up displaying Firefox already running but not responding. Please Help?

There are several possible causes, see [[Firefox is already running but is not responding]].

IPod recognised by computer but not by iTunes, Please Help!!

When i connect my iPod to my computer, the 'do not disconnect' screen appears , and my ipod is shown in 'my computer', but not on iTunes please can anyone help and give suggestions. All replies are gratefully appreciated.
Kayleigh xxxxxxx

Peter,
Peter. I had the same problem (only after installing 5.0.1). The only solution I found to work was to uninstall 5.0.1 and install the previous version that came on the packaged disk.
Something I noticed, however, is that you can still download and successfully run the most recent iPod updater software. The 9/23/05 iPod updater release works just fine with iTunes 4.7., but it would not recognize the iPod when running 5.0.1 (iPod service error). There is clearly a commong problem with many Windows users with the 5.0.1 release. Don't know if it's a bad iPod service script or what...but it doesn't work for a lot of users (although I, too, had access to the iPod as an external drive in explorer). Haven't seen anything from Apple on it, though.
Would like to see this fixed, soon!

Same Conect By query workds fine in 9i but not in 10g - Please help

We recently moved our project from 9i to 10g. A connect by query works fine in 9i environment but same not working in 10g environment. Please help.
While trying with a sample table, that also behaves samem way. Please find the query and help on how to solve.
create table test_connect_by (
parent number,
child number,
constraint uq_tcb unique (child)
insert into test_connect_by values ( 5, 2);
insert into test_connect_by values ( 5, 3);
insert into test_connect_by values (18,11);
insert into test_connect_by values (18, 7);
insert into test_connect_by values (17, 9);
insert into test_connect_by values (17, 8);
insert into test_connect_by values (26,13);
insert into test_connect_by values (26, 1);
insert into test_connect_by values (26,12);
insert into test_connect_by values (15,10);
insert into test_connect_by values (15, 5);
insert into test_connect_by values (38,15);
insert into test_connect_by values (38,17);
insert into test_connect_by values (38, 6);
insert into test_connect_by values (null, 38);
insert into test_connect_by values (null, 26);
insert into test_connect_by values (null, 18);
COMMIT;
In Oracle 10g:
SQL> select level, lpad(' ',2*(level-1)) || to_char(child) s
2 from test_connect_by
3 start with level = 1
4 connect by prior child = parent;
no rows selected
In Oracle 9i:
SQL> select level, lpad(' ',2*(level-1)) || to_char(child) s
2 from test_connect_by
3 start with level = 1
4 connect by prior child = parent;
LEVEL S
1 2
1 3
1 10
1 5
2 2
2 3
1 9
1 8
1 11
1 7
1 13
1 1
1 12
1 15
2 10
2 5
3 2
3 3
1 17
2 9
2 8
1 6
1 38
2 15
3 10
3 5
4 2
4 3
2 17
3 9
3 8
2 6
1 26
2 13
2 1
2 12
1 18
2 11
2 7
39 rows selected.

Hi,
user10739895 wrote:
It works fine and gives result without the "START WITH LEVEL = 1".
However, in 9i, we get the result with the clause "START WITH LEVEL = 1" and after migrating, now in 10g, we are not getting the result. Is it like in 10g, if it is Level 1, we should not specify?
Also, please clarify, is it like, if we don't specify the default is Level 1? Conceptually, LEVEL is assigned when rows enter the result set. Rows that enter because of the START WITH clause, by definition, have LEVEL=1. Rows that enter because of CONNECT BY have the LEVEL of the row to which they are connected, plus 1.
"START WITH LEVEL = 1" returns no rows when I try it in Oracle 11.1.0.
I suggest not using it.
If you don't have a START WITH clause, you'll START WITH every row in the table. That seems to be what you got in Oracle 9. Is that what you want? If so, then just don't use a START WITH clause.

IPod nano (5th gen.) being recognized by computer (Windows XP) but not iTunes. Please Help.

Hello everyone,
When I plug in my iPod nano 5th generation, my computer is recognizing it, but iTunes is not. I just recently bought it off of a friend and it was working perfectly. Today is the first time that it wouldn't connect to iTunes. I have tried using different USB ports and that didn't work. I plugged in my sister's iPod Touch and it worked fine. I don't want to have to try to uninstall/reinstall iTunes for fear of loosing some of the information on there. I have also read several things that say that that doesn't work, so I don't see any reason to take a pointless risk. If there is anything that I can do to get it to work? I would try another computer, but my home computer is the only one that I have. I really need to get it to work ASAP. PLEASE HELP!!

If you check other error problems linked to this issue (example errors 1437 and 1439), you will note that these recognition issues have been prevalent for a lot of iPods (not only nanos and suffles) since iTunes version 7.5 went away. Seems like Apple doesn't have a clue, and doesn't want to have a clue. Many people all over the world have come up with things that have worked for them, but none of those fixes are working for me any more. Maybe this is just Apple's way of forcing people to buy their brand computers. It stinks. I am at a total loss as to what to do to get my Nano recognized at all in iTunes, and my Shuffles to sync. Obviously we are all venting our frustrations on an Apple hosted discussion board. Equally obvious is that no one at Apple is reading this stuff, further displaying that Apple simply does NOT CARE.
If I ever in the next couple of years or so (see, I am not very optimistic) get an HONEST answer out of Apple, or a workable solution elsewhere around the internet, I'll do a follow-up post here. But, I am not very hopeful. I think my iPods have just become expensive chunks of junk, because I am NOT going to buy an Apple computer just for them.
[ Nano 2nd gen, shuffles 2nd gen ]

Can connect to network but not internet. Please Help!!!!!!!!!

I have a Thinkpad T-60p and have encountered a serious problem; I am unable to connect to the internet. The Thinkpad will recognize and connect to wireless networks but when I go to actually open a webpage it does not open. I spent hours troubleshooting the problem to no avail. My other laptop connects to the internet fine, so I do not think it is an issue with my router or modem. I also went to my neighbors and I was unable to connect to the internet even though I could connect to his network; once again my second computer does not have a problem. I tried what I could in the Thinkvantage wireless software but I am not that familiar with it. When I use the test connection option it just reads, “unable to connect to internet” but I have a strong signal to my network. I then tried a wired connection directly to my cable modem and my neighbors; once again it showed that I have a connection, but still will not connect to the internet. I tried disabling my Firewall and Virus software and still could not connect. I have shutdown, unplugged and reset everything. I still receive the same results. I am not sure what has happened, I have not installed any new software or hardware recently. The computer has been working great up until this morning. I ran my virus software and a free online scan as well, nothing had been detected. I called tech support and they said it was a software issue to either pay $100 for help or post in the forum. The only other option I can think of is a complete systems restore, which I am trying to avoid. Anyone have any suggestions?
Please Help,
P.

ConnectDon wrote:
Perhaps the domain names are not resolving properly. Instead of http://lenovo.com, try http://64.26.254.19, which is the numerical address for lenovo.com. If you see the Lenovo home page, it will point us in the right direction.
Don
I will try that when I get home from work, thank you for the advice. However,I did notice that when it attempts to connect it shows the IP Address in the IE window bottom left corner. In the past it would always read connecting to "website name" but since the problem started it shows the IP address instead of the actual name.

IPod visible in Windows but NOT in iTunes - please help!

I just got this sexy black iPod. Too bad I can't use it! Please help!
Here's what I've done thus far to try to troubleshoot why Windows sees my iPod but iTunes does not:
-went through the 5 R's (http://www.apple.com/support/ipod/five_rs/) Did this twice with NO luck! I obviously was not able to do the fifth R (restore) since iTunes never saw my sexy black iPod.
-reinstalled iTunes many times (restarted the service, deleted temp files etc)
-went through these steps: http://docs.info.apple.com/article.html?artnum=93716
-made sure that Terminal Services is set to Manual (in services)
-made sure the the black thing was not on 'hold'
-hit menu & select for 10 seconds
-tried on a different PC with a fresh copy of WinXP Pro installed. Same thing! Windows sees the iPod but iTunes does not.
-I ran the diagnostic and it says that my iPod is connected! What!? No it's not!
It also seems kind of slow, however, I don't have anything to compare this to.
I'm beginning to think that my iPod is iBroken. I'm very iDissapointed.
Any suggestions would be greatly appreciated!
--cheeto

I have the exact same problem with the same sexy black iPod. Let me know if someone helps you out. Sorry I don't have a solution. I'll keep you posted.

Hp Pavillion Laptop with Windows 8 - Speakers have stopped working but headphones do! Please Help!

Please someone help - the speakers on my laptop have stopped working all of a sudden! But the headphones do though there is a low buzzing sound when i use them.
When in control plan to look at the problem it tells me they are working.
Please help - laptop is only a few months old!
You will be my hero.
This question was solved.
View Solution.

Hi,
Open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Properties. Click the Driver tab and then click 'Update driver'. Select 'Browse my computer for driver software' and then select 'Let me pick from a list of device drivers on my computer'. Left click 'High Definition Audio Device' once to highlight it and then click the Next button to install it.
Has this made any difference?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Base Station appears to work but no internet? Please HELP!

Last night my internet and email was working fine. This morning I got no signal. I called the cable company and went through their diagnostics and determined that it is the Base Station I'm having problems with. When the modem is connected directly to my computer everything works fine, when I use the wireless I can't get on the internet or get email. The strange thing is that it says my airport is working and connected to the network. It also says that the basestation is connected to the internet but when I try to open a page I get nothing. Any suggestions?

I tried to setup my mother in laws brand new iBook, airport express and modem yesterday. I got it working when connected to the modem over ethernet and then set about adding the airport express. The first thing it did was upload verion 5.6 of the firmware and I then spend a number of hourse trying to get the thing working but it completely refused. The diagnostiocs said I was connected to the internet, but I could not connect to any servers. I called it a day and went back home.
Later last night I thought I would double check my own airport extreme settings to see if I could work out what I had done wrong. When I connected it asked if I wanted to upload the latest firmware so I said ok. I ended up with my setup in exactly the same situation. I then realised that it must be the 5.6 firmware that is causing the problem - but I couldn't even get on the apple website to find out what they were saying about it.
Anyway just got on now over dialup and there doesn't seem to be any mention of this problem other than this thread.
Has anyone else successfully uploaded 5.6 without getting this issue?
I'm currently downloaded 5.5.1 so I'll see if that fixes things.
I also noticed that I can't find a screen that lets you download 5.6 anywhere. Does anyone know if apple have withdrawn it?

Connect to Airport But NOT the Internet - Please help

My iPod touch has never had any problems till recently with connecting to the Internet.
I does connect to the Airport. But I cannot go to the Internet.
The error message I keep getting is that the server stopped responding, when using Safari.
My computer connects to the Internet no probs.
I done as much checking as I can, what else can I do?
Please help?

I had a similar problem and simply unplugged my cable modem for a few seconds. When it came back up, everything connected fine.

I think a firewall is interfering with my mail program - I can receive but not send. Please help!

I think Firefox may have installed a firewall that is interfering with my email program - I can receive but not send mail.
== This happened ==
Not sure how often
== Firefox updated with ALOT

Firefox does not install a firewall.

On a new computer, am trying to download/install photoshop elements 10 can download files, but not open them, please help

On a new computer, am trying to download/install photoshop elements 10, files are downloaded, but cannot open them, please try to explain if you can

you probably should have two files, an exe and a 7z file in the same directory. if so, click (or double click) the exe.
if that fails, what files(s) (name and extension) and file size(s) have you downloaded?

Upon opening a new tab, it auto selects the address bar. Also when closing firefox, you must wait 5 seconds before re-opening or you get an error saying it's already open but not responding. Please help!

Please help with this annoying problem - the firefox main start page that runs off google accel. should set it to the dialog box to search so you can begin typing A.S.A.P
Same with other websites like bing and google.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Try to wait a bit longer before reopening Firefox to give Firefox more time to close completely.
Try to use "Firefox/File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") to close Firefox if you are currently doing that by clicking the close X on the title bar.
See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
*https://support.mozilla.com/kb/Firefox+hangs

Pen Pressure works.. but not in Cs3? Please help

Similar Messages

Maybe you are looking for