Pen Tool Not Working In FinalCut 6 - OSX 10.6.8

Trashed preferences and still not working.
Forgive me if Im not posting this in the right place
but I just went round and round looking where to
post it.

Hey Ian - Yes - I also trashed the User Data Folder.
Hey Meg - I am trying to mark keyframes to adjust audio levels
and fade ins and outs on pic.
It doesn't work when I select it (nor does the pen delete etc.)
And doesn't work when I hit p.
All the other tools are working.
Thanks for your response.

Similar Messages

Pen Tool not Working

I started a new project, and I'm coming up on a deadline. I'm trying to adjust the audio, but the pen tool won't work. I've never had this problem before. Am I doing something stupid? Thanks for your help.

I clicked on the pen tool, but it acts as a pointer. The pen tool box deepens, as it usually does. When I push P, on the key board, it still doesn't work. If I try to click on the audio, it highlights the clip. All the other tools work properly. I'm trying to adjust my audio levels. I went to trash preferences, but there is no FCX User Data folder. I know I have trashed preferences before, and it was there. I had to do an archive, and install, some time ago, if that's matters. Thanks.

Illustrator Cs2 Pen tool not working.. Help!!

So I downloaded Ai cs2 the other day. Whenever I come to drawing polygons with the pen tool I set the fill to a colour and the stroke to none(/) just so i can produce block colour shapes without an outline. However When ive come to do it on cs2 the pen tool only lets me draw thin black lines... What am I doing wrong??

THat's outline view.
If you turn on preview mode, you should see that shape.
But since it's not selected and the layer in the layer panel is closed, it's impossible to analyze this further.

Delete point (audio) pen tool not working

I have for long easily used the delete point pen tool to lower or raise the decibel levels in the Timeline.
Now, I can't. I don't understand what changed. I've tried to use it on films I've already used it on.
All that happens is that the entire track gets 'selected' (turns to dark purple).
I don't think I've changed any settings.
I have FCE 4.0.1 (not HD).
Flummoxed.

Trash the FCE Preferences.
This will assist with the job:
http://www.digitalrebellion.com/prefman/
Al

Pen tool not working in cs2

Can you help? I cannot get my pen tool to make an active selection. It completes the path, but then when I try to inverse selection, it says no pixels were selected. I am new to this and very frustrated. It will let me select all, but the path area remains inactive. PLEASE HELP!!!!

> It completes the path, but then when I try to inverse selection, it says no pixels were selected
What Phos says is true, but since you say you are getting a selection I will assume you said pen but meant marquee tool or some other selection tool.
Usually you will get the no pixels selected message when you are on a layer that does not have any content. You can see content, but it is on a different layer. Change to the layer with the content in the layer palette, and then you should be able to inverse your selection.

Pen tool not working the same

I don't often use the Pen Tool as it is not needed but when I do, I do the same kind of thing and that is draw around something so that I can use a filter on the selected area.
I was able to create a shape within a shape so there is a hole and then apply my filter to it. However, when I try to do the same thing it is all weird!
I create a shape and then put a shape inside, right click and choose Make Selection and the inner shape disappears leaving the larger outer shape.
Does anyone know what might be causing this and how I can rectify it. Another weird thing is that when I use a filter it applys it outside of the selection, but this is not as annoying as the original issue.
Any hwlp would be hugely appreciated!
Nig

function(){return A.apply(null,[this].concat($A(arguments)))}
UltimateTop Trumps wrote:
I create a shape and then put a shape inside, right click and choose Make Selection and the inner shape disappears leaving the larger outer shape.
function(){return A.apply(null,[this].concat($A(arguments)))}
UltimateTop Trumps wrote:
Another weird thing is that when I use a filter it applys it outside of the selection, but this is not as annoying as the original issue.
This occurs when you use the quick mask to create a selection. Did you?
miss_marple

Why is my pen tool not working??

Instead of drawing shapes, my pen tool only creates a new shape layer every time I click..
What am I doing wrong??

Yes, but that didn't seem to be what you were asking.
If you have no layer selected, using the pen tool draws a new shape layer.
If you have a layer selected, using the pen tool draws a mask (unless the layer is a shape layer, in which case it draws a new shape within the selected shape layer).
Please, read the Help sections on shape layers and using the pen tools:
http://helpx.adobe.com/after-effects/using/creating-shapes-masks.html#create_a_bezier_shap e_or_mask_using_the_pen_tool

Creative cloud photoshop blur tool not work as it should be

creative cloud photoshop blur tool not work as it should be !
I go to blur a painting i am doing and it does not blur enough and I am using wacom Intuos 5 med pen tablet.
and I even set the tablets sensitivty for pressure lower then default and still not getting the blur tool to do its job.
I even adjusted the brush settings too to be able to blur even more on hard settings, still nothing.
at least it not bluring enough to see any major changes.
the only way i can blur anything is by using the fliters blur or the brushes ( mixer brush ) settings to mix colors and do it that way.
(note) I will not post my systems specs sorry I don't do that and even the tech from adobe said I do not have to. and so I wont !
just need advise not to share system specs.
and thats what this forums board is for getting advice and read what others say about the issue at hand.
it's not to post or share system specs !!!
so with that out of the way I need advice only please ?

Hi,
It might be your image is too big in terms of pixel dimensions for the blur tool to work well.
If you zoom to 100% do you see any change when using the blur tool?
What are the pixel dimensions of the image?
(Image>Image Size)
If you try a small image, does the blur tool work?
What about when you use the mouse instead of your tablet?
Can you at least tell us what operating system and version of photoshop your using?

Pen Pressure not working in Photoshop CS5.1

Hello,
I've looked at a lot of questions and answers concerning pen pressure in this forum, and I've tried a lot of things to fix this problem. I have a Genius MousePen 6x8 and use Photoshop CS5.1. It's been a while since I used my tablet, but it used to work before. I rebooted my computer a while ago, so I installed the new driver from the Genius website. The tablet is working fine, even the pen pressure, but for some reason it just won't work in Photoshop. I've tried to fix it by resetting the Photoshop settings by using the Ctrl+Shift+Alt, I've reset the brush tool, I've played around with the brush options and nothing has worked.
Here is the image of the pen pressure working:
And here is the image of the settings for the brush and the pen pressure not working:
Thank you for your time!

Your tablet driver isn't reporting pressure correctly.
The knockoff tablet drivers usually need to be revised for each new version of Photoshop (and we have no idea why).
Contact your tablet maker to see if they have updated drivers to fix their bugs.

Pen tool not reconnecting after using convert point tool to reajust?

Hi
I was wondering if anyone had come across the problem pen tool not reconnecting afer using convert point tool to reajust? sorry if you don't understand what I mean, basically I can't reselect my pen tool to its path one doing another similar type task with another pen tool task.
thanks,
helen

http://forums.adobe.com/people/Larry%20G.%20Schneider
Larry,
I Just tried the solution you gave. It did not work. I still have 1 point vectors in a very small image. The image is a simple drawing of a map. I just want to size it to fit a smaller page size.
Elaine

Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....

Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....
-CharlieH23

Copy and paste only this area, you may have to scroll down.
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2494 MHz
Built-in memory: 6019 MB
Free memory: 3360 MB
Memory available to Photoshop: 5227 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 1.2
OpenGL Version: 2.1
Video Rect Texture Size: 16384
OpenGL Memory: 2112 MB
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics 4000
Display: 1
Display Bounds: top=0, left=0, bottom=768, right=1366
Video Card Number: 1
Video Card: Intel(R) HD Graphics 4000
Driver Version: 10.18.10.3958
Driver Date: 20140930000000.000000-000
Video Card Driver: igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10iumd32
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics 4000
Video Card Memory: 2112 MB

I have Photoshop cs5 and the pen does not work. The icons below also do not work. Why? and how can I activate them? Thank you , Wren

I have Photoshop cs5 and the pen does not work. The icons below also do not work. Why? and how can I activate them? Thank you , Wren

Why?
Do you expect an answer to that question based on the information you have provided so far?
Please read these and proceed accordingly:
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325

Converting WordPerfect to PDF with desktop printer tool: Not working

I have been a monthly subscriber to Adobe CreatePDF for many years! I work mainly with Correl WordPerfect, but with the change to the Pack version it is not supported. I downloaded the desktop printer tool; it is installed. However, when I follow instructions and print, I get nothing. Where does the PDF go? What can I do? Please help! I cannot continue to pay monthly if I don't get service.

Thank you very much. I have uninstall adobe desktop printer tool and my wordperfect. Next step is follow your suggestions but I am no computer anything, lol. 1. How do I know if I have a win 7 sp1? I have win 7 that much I know. 2. Where can download the hotfix? 3. With adobe createpdf, I didn't need adobe ps printer setup, I don't have a laser printer at home, I have an hp inkjet printer.
Please help again and soon, :).
Date: Tue, 7 Jan 2014 11:52:08 -0800
From: [email protected]
To: [email protected]
Subject: Converting WordPerfect to PDF with desktop printer tool: Not working
    Re: Converting WordPerfect to PDF with desktop printer tool: Not working
    created by H.Spector in Adobe PDF Pack (formerly CreatePDF) - View the full discussion
Please do following
(A). If your system is Win 7 SP1 then install a hot fix to correct inetpp.dll version at C:\Windows\System32 folder.After installing the hot fix version will be 6.1.7601.21819 from 6.1.7601.17514.
Note please uninstall CreatePDF Desktop printer then reinstall after applying the hot fix
(B). If you have not installed Adobe Postscript driver yet then please install one as below:
How to Install PS printer:
1. Open Start menu > Devices and Printer ( or from control panel) and select "Add a printer"
2. Select "Add a local printer"
3. Select "Use an existing port: LPT1: (Printer port)
4. Select any company and any PS printer with Adobe PS printer driver(not clone) such as Xerox and Xerox Phaser 6120PS
Adobe PS driver files:
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532123/450-202/PagesfromHowToInstall_PS_PrinterDriver_onWin7.jpg
(C) Go to the printer configure port and verify your Adobe ID and password
1. Goto Start> Devices and Printers > Adobe CreatePDF Desktop Printer
2. Click right mouse to open “Printer properties”.
3. Select “Ports” tab
4. Select ”Internet Port: Adobe CreatePDF Desktop printer”
5. Click “Configure Port…” button at the bottom
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532115/410-417/IPP_Scr eenshot.png
When printing to PDF you will see below and an email is delivered to your email inbox. The converted PDF file will be stored at https//files.acrobat.com.
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532116/395-199/IPP_Scr eenshot_Queue.png
Thank you
Hisami
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5989811#5989811
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5989811#5989811
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5989811#5989811. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Adobe PDF Pack (formerly CreatePDF) at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Lost ical and the ical 1.5.5 is not working with mac osx 10.5 ?

lost ical, would like to download it, as in the installation disk, I'vent the possibility to do it . The problem is that the ical 1.5.5 is not working with mac osx 10.5 ?

biomecasport,
Welcome to Apple Discussions.
1. Insert the Leopard Installation disk into the computer.
2. The disk will appear on the desktop.
3. Double click on the "Optional Installs" folder.
4. Double click on the "Optional Installs.mpkg."
5. Click on (Continue) in Introduction.
6. Click on (Continue) in Software License Agreement.
7. Click on (Agree) to agree to the terms of the software license agreement.
8. Click on the disclosure arrow ▶ next to Applications.
9. Select (✓) iCal.
10. Click (Continue).
11. After iCal has been reinstalled, download and install the Mac OS X 10.5.8 Combo Update to bring iCal up to the most recent version.

Content aware move and extend tool not working in PSE12

Photoshop Elements 12 content aware move and extend tool not working with Yosemite upgrade.

Have you deleted the preferences and the saved application states?
A Reminder for Mac Folks upgrading to Yosemite | Barbara's Sort-of-Tech Blog

Pen Tool Not Working In FinalCut 6 - OSX 10.6.8

Similar Messages

Maybe you are looking for