Pen Tool Precision Problem.

Hello Adobe forum,
Recently after opening a document in Photoshop & using the Pen tool, the precision gets thrown off. When I click to add a new anchor point, it doesn't place the point at the end of the pen, but rather at the base of the pen. Any suggestions? I'm on a Mac platform & using CS4.
Thanks in advance!

This is the info I found about my Graphic Card:
ATI Radeon HD 2600 XT:
Chipset Model: ATI Radeon HD 2600
Type: Display
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x9588
Revision ID: 0x0000
ROM Revision: 113-B1480A-252
EFI Driver Version: 01.00.252
I'm not too concerned. It's my work computer that's doing it. I don't have any problems with my iMac at home. And if switching viewing modes fixes it, I'll live.

Similar Messages

Photoshop CS5 Pen tool Selection problem?

I've been using photoshop for a while, and have never encountered this problem. I've had CS5 for about a year now and this is the first time it has done this, so hopefully someone can help me!
When I open photoshop, everything works. I make a new layer, go to use the pen tool, make my shape and then complete it, and the line solidifies showing its a complete shape. I right click, and select the option: Make Selection.
Instead of turning the inside of the shape into the selected part, it selects everything outside of it!
I can't for the life of me figure out how this started happening, as it didn't do it a few days ago. I must have hit a button or something, but its still very annoying. Hopefully someone can help! Restarting both the program and the computer, does not help.

There's a button for that up in the options area, when a Path Tool is active. It's been a while... Ah, here:
I'm betting you have the one next to it pressed.
Look at your path icons in the PATHS panel. If they're white inside, you're creating an enclosed path. If they're gray inside with a white surround, you're removing a path from the surroundings.
-Noel

Photoshop CS4 Pen Tool Visibility Problem

I recently upgraded to CS4 and started using Photoshop to do some work. Working on some clipping path with the pen tool I've come to notice how incredibly light the pen tool outline is. I cant see where or what im tracing cause I can't tell where the line is unlike the other earlier creative suites where the line was visible.
Anyone have any ideas on making this outline more visible so I can actually see what I am doing. Input would be much appreciated.

I am having the exact same problem with Photoshop CS 4 on my MacBook OSX 10.5.7 4 GB RAM Intel GMA X3100: graphics card
When I enable Open GL in PS CS4 preferences, the pen tool line is too light, too thin to use and the anchor points aren't accurate , I have to disable Open GL to get the normal pen function back. Adobe should get us a fix to make Open GL compatable with all graphics cards. All functions in Open GL work fine except the Pen Tool.

Pen tool filling problems

Hello!
Who can help me out. I'm a CS2 user and want to use the pen tool to create an object. Thats a piece of cake but then I like to fill the object with lines, crosses or something like that. Only I'm not capable of finding that kind of fillings. With this link you can find a example of the filling i'm searching for: (it shows that you can select the filling separately from the object.)
http://img116.imageshack.us/img116/2377/49610002wl9.jpg
Thanks
Maarten (netherlands)

One quick way would be to make the pattern (or find one) and use a copy of your shape as a clipping mask. Or, if the pattern is vector art, you could use the Shape Modes under Pathfinder to actually cut the pattern to the size and shape of your object.

Problem with Pen Tool CS5

Hi,
I just got Photoshop CS5 and I'm having a bit of trouble with the pen tool - namely, I can't see the path I'm creating. In CS3 I could clearly see the line between two points but in the new program the line is nearly invisible making it very difficult to create the path. Is this a setting I can fix?
thanks

I was having 32 bit while I upgraded from CS3 to CS4. The only problem with CS4 that time was with pen tool.Though I cannot precisely recall , I can say it t was very lazy and very frustrating and this was resolved totally after shifting to 64 bit.--If urs existing system is 32 bit try with 64 bit

Problem creating vector mask with Pen Tool

Using Photoshop CS5, Mac OS 10.6.8
I'm trying to create a simple vector mask using the pen tool to create a curved line at the top and bottom of a photo. Here's what I'm doing:
1. Create a new layer and select it.
2. Select Pen tool.
3. Choose "work path" by selecting button at top menu.
4. I draw my shape with the pen tool.
5. Now comes the problem... I can not select this shape, or assign it a color. When I create a clipping mask, it does not recognize my path. When I throw away the layer, the shape is still there in outline only. What am I missing here? I'm familiar with doing this in Illustrator, but I don't understand how it works in PSD.
I need some help, please.
Thanks.

The main thing i use paths for in photoshop is extracting objects from photos.
Other uses include stroking paths with the paint tools. For example, if you had
a powerline to remove, one could trace the line with the pen tool and then stroke
the path with spot healing brush set to content aware fill.
more info on photoshop paths:
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-73ada.h tml
MTSTUNER

Type tool anchor and pen tool problems CS4

I have been working in In-design for my classes and everything is working fine. But recently I needed to do some work in Illustrator but when I opened the program up, some of my tools seems to be slightly bugged or something.
The type tool will not make the anchor where I initially click. It creates the anchor around the center point of the type box. This is really annoying because if you have a specific grid, it will not line up to it. I have never adjusted this I don't think because now I have no clue on how to fix it!
Also, my pen tool seems to be messed up. I first create the starting point, but then when I make the second point and try to drag out the node arms to make a curve, it only has one arm! Thus, the curve never is created, so I can't draw with the pen tool, therefore I fail my classes... haha
I have a big project starting soon and any help with this odd problem would be greatly appreciated! Thanks so much for any potential help
-- Jordan

To try to make things more clear:
When I click on the type tool, the line tool, or the rectangle tool (any tool used by clicking on a starting point 'anchor' and dragging it) if I click and drag to the bottom right, it creates a rectangle that around the center point of the bounding box. Its really freaking weird. I've asked all my design friends and they don't know either. BUT! If I click to make the initial anchor, then drag to the upper left it works as the type tool bounding box usually does. Meaning, I can make the box to conform to grid lines, or the like. The rectangle tool does this as well.
Now, the line tool is messed up as well, but a little different. When I select the anchor point and then start to drag (click then drag to the right) the anchor does not stay in place. IT GOES OFF TO THE LEFT. It is so annoying. So If I'm trying to make a line that goes from the top of the page down, the line will go down with my cursor as I drag down, but it will also go up at the same rate. Its real dumb. Any help would be great.
As for the pen tool:
I'm not a new user to Illustrator. I've been using it for years now and never seen this problem. I showed it to my professor and he had no clue. I have used CS3 and CS5 as well and both operate normally and much different from mine. I can't exactly explain it for it is that weird, but if there is any way I can reset the tool, or put it back to its defaults that would help a lot.
Thanks in advance,
Jordan

Pen Tool Problem With Adobe Illustrator CS4

Recently, after many years, I finally gave up using AI 9 and started to use AI CS4.
However I'm having a real problem and it's bugging me. When I start to use the pen tool on CS4, it gives me far too much information and interferes with my concentration. First, all these details in green pop up telling me that something is the path or anchor. Second, there is this horrible grey box next to my pen telling me such things as 'D: 62.54 pts'.
Could someone please tell me how to deactivate all these appendages and I can just have mmy basic pen back.
Thanks

Thank you very much Joe..... Problem solved.
It was driving me crazy.
Again, thank you.

Problem with pen tool, lines and blend tool

I draw line 1.
Then I break (click the arrow key and then click the pen tool again) and draw line 2
When I finish there is a puzzling gap on line 1 after where line 2 intersects:
Then when I use the blend too the resulting abstract looks like - non-continguous with broken lines:
instead of something of a continuous wave and unbroken lines like:
To me, the problem is clearly the gap show up but I don't understand why it is appearing, when as picture 2 shows, I clearly I'm drawing complete lines.

Thanks. That fixed it. I was able to select no fill in the pen tool bar (when pen tool is active), but could not select no fill when I clicked on the fill box in the regular tool bar (unless there is a trick) - all that comes up are color gradients to select.

HELP! Illustrator CS2 pen tool problems

Hi, All
new to the forum...great resource...
I'm having a problem with my CS 2. Specifically my tools are acting weird..
The pen tool will not allow me to place points where I want them, or adjust the handles with any finesse. When I go to place a point in a certain spot, and click the mouse, a point appears nearby but not where I want it to. Then, when I try to move it, or adjust its handles, it only will go where it wants to...not where I'm telling it to go.
I can select objects, but cannot place them where I want them!!!! ( I can get close, but no cigar!)
This is most frustrating!....
I have re-installed the program.
I have also restarted the computer.
I have not trashed my preferences folder....not sure where that is or if that might be the problem.
Can any of you guys (and gals) help?!?
many thanks in advance
JP

DUH!
Thanks very much JET.....that was exactly it.....though how it got turned on, I dont know....(couldnt have been anything I did!!!) lol
JP

Pen tool Drawing & Bucket Filling Problem

Hello, i am a newbie and novoice/new learner to flash CS4
I come across a problem when i follow the book "classroom in a book series" the Flash CS4 one (Red cover book) Chapter 2
Q.1
I try to draw straight lines or curves but i found i still cannot manage how to use PEN TOOL
How can i draw straight line? Also how can i draw absolute vertical or horizontal line with some special combination key like CTRL or SHIFT
i tried guessing SHIFT or CTRL while using PEN TOOL but no help
How can i draw curve?
i know it depends somehow on whether i hold my click for a new anchor point???
Any tutorial which is clear and easy for new comer for fully understanding for PEN TOOL.(Currently i try reading pdf reference from ADOBE Web site and google search but did not make myself understand.)
Q.2
I cannot use bucket filling a shape draw by PEN TOOL(i already search google sites but cannot find one with satisfied causes for this FILLING Problems)
like the image shown below(Please click to enlarge this PRINTSCREEN)
Tools i used are PEN TOOL drawing a shape first then a BUCKET for filling color.
Many thanks to any of your help!!!!!

Reply to 2nd floor post
Thank You for your answer and your appreciation.
but.....i am so sorry to have a further question NOW!
i follow your link and learn some technique which is supposed to work well:
http://www.recipester.org/Recipe:Fill_a_flash_shape_with_gap_33956508
However,i go there and did a experiment MYSELF.
first i draw an oval with black color stroke and no color for its fill.
then i use an eraser tool to make that little gap!
Q.3 (A NEW QUESTION)
however i cannot fill the oval with even very SMALL GAP like this jpeg shown below:(PLEASE click below to ENLARGE it)
I then find i cannot use bucket fill AGAIN...
For the first question, i try to use the pen tool for 6 hours practicing....and reading the official manual i find there are multiple modes of pen tool
so COMPLEX!! which is not mentioned in my red cover book from Adobe Press.(the book i mentioned in 1st post maybe have some more explaination later?)
I generally can click or drag to make some straight or curve now like 3rd floor reply.(Subselection tool is helpful when adjusting the curve or line)
AGAIN Thank You so much!!!!!

CS4 Pen Tool problem

I'm using CS4 on a Mac OS X 10.5.5 and I can't for the life of me figure out why when using the pen tool my a anchor points are coming out the back of the pen... literally. So when I click and think its going where I tell it to, it comes out the back. I'm losing my mind.. any ideas ? Please tell me I'm an idiot and it's a simple fix
Thanks for any help

Simple enough to work out, every time you reset the screen mode (F key) it has to redraw the entire workspace. So graphics card has ro re-render
The displacement I think, although I'm not sure, may have something to do with rulers (command R), and accomodating the ruler space. CS4 is the first time they wrote all the Open GL features, and they made some decision at the start that certain older versions of Open GL could not be fully supported for some reason. If you upgrade your graphics card you will find that this problem dissappears.

Pen tool not precise

I am using Illustrator CS5. When I use the pen tool to outline some photos, there are these green stuff that keep interfering. Anchors, and green straight lines and all those. It makes it hard to be precise, especially with small photos. Can I disable it?

The green stuff you see is called Smart Guides. Press Cmd/Ctrl-U to disable Smart Guides.

Illustrator Pen Tool problems

My pen tool in Illustrator CS3 is not working properly. I am operating on Windows XP. I have deslected snap to guide and even reinstalled Illustrator.
Any help for me.

SunniAva wrote:
I have to click twice to make the first point and instead of curving it makes a straight line. And, sometimes when I want to complete a circle it cuts half the circle off.
Does it do this all the time, in all documents? Are you using a mouse or digital pen? Sounds like something wrong with the input device. Do you have problems with the other illustrator tools or different programs?

Pen tool in CC problem

How do I make a selection within a selection with pen tool in CC, I have no problem making the first selection and get the marquee but when i try to do the next one it refuses? the goal is to make a selection with pen tool instead of quick selection or magic wand tool.

How do I make a selection within a selection with pen tool in CC, I have no problem making the first selection and get the marquee but when i try to do the next one it refuses? the goal is to make a selection with pen tool instead of quick selection or magic wand tool.

Pen Tool Precision Problem.

Similar Messages

Maybe you are looking for