Penalty Interest Calculation

Dear Friends,
Could you please send me if you have customization procedure for customer penalty interest calculation.
My email id is: [email protected]
Thanks in advance for your help.
Regards,
Madhava
Edited by: Madhava Venkat on Aug 4, 2008 5:43 PM

Hi Madhav,
We cant use Payment Terms for penalty interest for Customers...payment terms used for only cash discounts and not for interests and you can use Dunning charges or Dunning Interest for customers...that will be maintained in "Dunning Procedure" FBMP.
Hope understood and let me know if you have any concerns.
Thanks,
Vasu..

Similar Messages

Interest calculation type-Z-Penalty Interest Calculation

Hi all !!
I would like to know about the Interest calculation type-Z-Penalty Interest Calculation, if it is necesary to do some aditional customizing , and which are the differences between Item Interest Calculation and Penalty Interest Calculation.
Best regards and thanks all

Thanks Chandra,
Could you give us some links where we can find more info of how to configure/run this specific issue of calculate interest on interest and other aspects of penalty interest calculation.
The other point if it is possible or there is a way to depending on open items for a same vendor have a different interest indicator, I mean something like a field at the financial document in order to choose between different type of interest indicators.
Best regards and thanks

Penalty Interest calculation procedure

Dear Friends,
Could you please send me if you have customization procedure for customer penalty interest calculation.
My email id is: [email protected]
Thanks in advance for your help.
Regards,
Dwarak.

This configuration allows you to charge interest on overdue customer accounts. Interest can be calculated by using the line items or overall account balances. SAP keep tracks of the date of the last interest run and stores it in the customer master record.
First create an Interest Indicator.
OB46 - Interest Settlement Calculation Type
Int Calc. Type
P - calculate interest based on line items.
S - calculate interest based on account balances.
Secornd, make it avaliable to the interest run program.
OB82 - Interest Terms
Third, determine the interest rate that will be used by the calculation.
OBAC - Define Reference Interest Rates
OB83 - Enter the Reference Interest Rates Value
Fourth, assign the interest indicator to the reference interest rate.
OB81 - Define Time Dependent Terms
Finally, determine the how and to which accounts the interest program will post.
OBV1 - Prepare Interest on Arrears Calculation

Vendor Interest calculation with penalty calculation

Dear All,
We have some requiremnt from my client.
We receive Deposit from our Loan Creditor for a specified period and refund/payback the amount along with interest after completion of the tenure of the deposit.
Meanwhile,if the depositor wants to withdraw the principle amount then the following are the scenarios,
In case the deposit is withdrawn after 6 months but before 18 months, then the rate applicable for ONE year shall be taken and 1% penalty should be deducted and interest shall be recalculated for the period for which the deposit is run and excess interest paid (if any) is to be deducted from the interest/principal.
In case the deposit is withdrawn after 18 months but before 30 months, then the rate applicable for TWO year shall be taken and 1% penalty should be deducted and interest shall be recalculated for the period for which the deposit is run and excess interest paid (if any) is to be deducted from the interest/principal.
In case the deposit is withdrawn after 30 months but before 36 months, then the rate applicable for THREE year shall be taken and 1% penalty should be deducted and interest shall be recalculated for the period for which the deposit is run and excess interest paid (if any) is to be deducted from the interest/principal.
Also we want the applicable tax should be deducted on interest and the net interset amount should be credited to depositoru2019s account once we are execute the (period specific) interest calculation run in SAP.
The entry must be
Interest on Fixed Deposits Dr
Interest Payable on Fixed Deposits (Net of TDS, if applicable) Cr
TDS on Interest Payable CR
Do suggest,how this can been config in SAP system.
Appreciate your time and patience.
Regards,

Dear All,
Stil;l expected some inputs on our req.
Do comment
Regards

Vendor Interest calculation

Dear All,
We have some requiremnt from my client.
We receive Deposit from our Loan Creditor for a specified period and refund/payback the amount along with interest after completion of the tenure of the deposit.
Meanwhile,if the depositor wants to withdraw the principle amount then the following are the scenarios,
In case the deposit is withdrawn after 6 months but before 18 months, then the rate applicable for ONE year shall be taken and 1% penalty should be deducted and interest shall be recalculated for the period for which the deposit is run and excess interest paid (if any) is to be deducted from the interest/principal.
In case the deposit is withdrawn after 18 months but before 30 months, then the rate applicable for TWO year shall be taken and 1% penalty should be deducted and interest shall be recalculated for the period for which the deposit is run and excess interest paid (if any) is to be deducted from the interest/principal.
In case the deposit is withdrawn after 30 months but before 36 months, then the rate applicable for THREE year shall be taken and 1% penalty should be deducted and interest shall be recalculated for the period for which the deposit is run and excess interest paid (if any) is to be deducted from the interest/principal.
Also we want the applicable tax should be deducted on interest and the net interset amount should be credited to depositoru2019s account once we are execute the (period specific) interest calculation run in SAP.
The entry must be
Interest on Fixed Deposits Dr
Interest Payable on Fixed Deposits (Net of TDS, if applicable) Cr
TDS on Interest Payable CR
Do suggest,how this can been config in SAP system.
Appreciate your time and patience.
Regards,

Hi
asset accounting is not the right place for this inquiry, as asset accounting does not vendor interes calculation.
Blaz

How to calculate penalty interest on customer

hi sap guru's
how to calculate penalty interest on customer. what type of settings for required to calculate . pls tell me.

Hi Shiva
You have options like Balance interest calculation or item level interest calculation. You can configure the setting as per your requirement and you can charge interest on default customers.
Thanks
Ashok
Assign points for useful answer

SAP Interest Calculation - Flat Amt

Hello,
My client charges penalty on his customers based on late payment. However, he charges Rs. 100 / day on each invoice amt as the interest for each day's delay. The penalty of Rs. 100 / day is independent of the invoice amt.
How to get this going?
Thanks

Hi,
Please check FQEVENT 2095 (Interest: Calculate Net Amount for Interest Calculation). If you can make net amount constant it will result in flat rate as expected. Additionally you can have code custom logic when to apply flat interest.
I haven't tried this, however you can try and let us.
Regards,
Avinash

Interest calculation

Hi
I hv configured the interest calculation as shown below
1.Define interest calculation type (item interest calculation)
2.Define number ranges for interest forms(for xxxx company code)
3.Prepare Interest on Arrears Calculation(selected open and all cleared items, calender type F)
4.Define reference interest rates
5.Define Time-Based Terms
6.Enter Interest Values
7.Assign Forms for Interest Indicators
i have made postings in customer both open and cleared items for testing
but i got message"list contains no data"
do i need to make any other config.
useful answers would be rewarded with points
Regards
Prasad

Hi Prasad
PLease check whether Customer master records are assigned with correct "Interest Indicator" at company code data.
Best reagards,
S. Habib Pasha.

Interest calculation on Open items and cleared items

Dear Experts
I am trying to do needful configuration for interest indicator on which interest can be calculated for open items and cleared items as well. But, system is calculating interest for open items properly, but not calculating interest on cleared items with same interest indicator, I am repeatedly getting error "interest calculation indicator is not compatible with this type of interest calculation"
Is it possible to use same interest indicator for open line items and cleared line items of customer?
If possible, request you share the needful config steps to do same.
points will be awarded for usful reply.
Best regards,
S. Habib Pasha.

Hello Habib,
depending on the requests you can setup a item interest calculation or a balance interest calculation "Define calculation types".
IIC: check settings (item selection, all cleared items, only items with payment, no cleared items) "Prepare item interest calculation"
I guess you have setup the item interest calculation - maybe you have mixed some entries with BAIC.
Check in "Prepare account balance interest calculation" whether you have entries with the indicator you want to use.
At least check your entries in "Define time-based Terms" If you have entries with Balance account interest calculation the system gives even an error.
Hope this is helpfull.
Best regards
Horst

Dunning interest calculation

Hi All,
When I checked table MHND, the dunning interest is calculated in such a way that it doesn't consider the previous dunned date.
Meaning :
Dunning ran on 12-01-09 interest calculated is 500.00 ( 2 docuemnst considerded from bsid as seen from table MHND )
Dunning ran on 15-01.09 interest calculated is 500.00 ( same as above)
Ideally for Dunning ran on 15-01.09 , it should not calculate interest since on 12th it is done..!!
Now queries:
1. Where can i see these interest calculated during dunning run ( any report ? ) other than table..? In std SAP, is this interest
calculated and shown only in the dunning letter ..? Does it have any other financial impact on outstanding..?
2. when I try to run the single dunn. notice, and see sample print out it gives message as
Account D 0004298846 is blocked by dunning run 20090319 MDUN1
why is it so and how to resolve..?
thanks,
Neha

can some one provide some advice on this..?
thanks,
Neha

G/L account interest calculation

Hello Experts,
I have an issue with F.52 interest calculation; we have calculating interest for the period 01.07.2011 to 31.07.2011. However, calculation went fine for all G/L account except two G/L account which has calculating interest for earlier periods also.
We analyze the issue and found out a one possibility, because of field u201CDate of Last Interest Runu201D however this field applies only when there is posting to G/L account with earlier date for which interest already been calculated. I have seen the documents which were wrongly picked in the interest run, and entry date is in earlier monthly only.
I do not understand why these two G/L accounts is picking the documents in the earlier periods to calculate the interest for the period 01.07.2011 to 31.07.2011.
Thanks in advance.
Regards,
MM

Hello Mauri,
Thank you very much for your reply.
First of all we are not using the G/L updation through this program.
I have an issue with only for the period 01.07.2011 and 31.07.2011 for two G/L account, and calculation is asolutely fine for all the earlier periods and even for next period 01.08.2011 ot 31.08.2011.
As per my understanding u201CDate of Last Interest Runu201D, applies only when there is posting to the G/L account with earlier date for which interest already been calculated.
If I keep the Date of Last Interest Run field blank, it calculate interest only for the period 01.01.2011 to 31.07.2011, however I can.t propose this solution because in all earlier periods they executed F.52 transaction with similar input parameter and calculation is absolutely fine.
Please let me know your view.
Regards,
MM

Bank Interest Calculation on Opening and Closing Balance

Hi Experts,
I have quiry on bank interest calculation. when was run F.52, giving one months (01.04.2008 to 30.04.2008) calculation period that time system calculate interest from 01.04.2008 to 30.04.2008.
System calculate interest on Balance Carryforward amount.
But why the system do not calculate interest on Closing Banlance ?
1) We do not want the system to calculate interest on Balance Carryforward Amount.
2) And we want the System to calculate interest on 30.04.2008 (that is on closing balance).
How this can be done?
Reliable answer get huge points
Regards,
Jemes

vlauation is at plant level (MBEW table) the storage location level does not carry values (table MARD).
You may have to develope your own ZMB5B program and calculate yourself what is not stored in SAP.

Customer Interest Calculation - Customer Receipt

Hi All,
We have implemented Item Interest Charges for Customer w.e.f Feb 12
We executed the Interest Run for Jan.12(our first cycle). and the system has posted Interest document for all relevant customer with applicable interest rates in Jan12.
In Feb12, we received a receipt from a customer for (whom we executed the Interest run) specific to a sales invoice.
When we tried to clear off the sales invoice the system does not allows to process customer receipt because interest amount has not been paid by customer.
Accounting department don't want to process Partial/Residual payment for the above transaction.
Now our management requires that we must have an option to set off the interests charges separately and the interest charge must not be included with sales invoice on customer receipt.
Lets take an example (for one customer with same currency)
Sales Invoice 1. 10000EUR
Sales Invoice 2. 5000EUR
Sales Invoice 3. 15000 EUR
Total Open item 30000 EUR
Interest Calculated for the above invoices (line item) Doc No Interest .1
Interest Amt : 100 EUR (Sales Invoice 1)
Interest Amt : 50 EUR (Sales Invoice 2)
Interest Amt : 150 EUR(Sales Invoice 3)
Overall Balance end of Jan12 (after Interest Run) : 30300 EUR.
We received a payment for Sales Invoice.1for 10000 EUR on 5 Feb 12(customer has not paid the interest amt for sales invoice.1)
When we process customer receipt (F-28 or F-30), the system is showing an details as Gross : 10000, Partially Paid Amt 100- and when we select the specific invoice the system displays an overall 10100 EUR.
Now our Question is that, is it possible to clear individual sales Invoice (with its original value) and Interest charge separately.
i.e as per the above case 10000 EUR separately & 100 EUR separately or entire interest amount (300EUR) separately, two different customer receipts.
As customer state that he will pay the Internet amount separately (as we have generated the Invoice for interest charges) might be complete 300 EUR in single payment or partial.
Can you provide any lead/workaround to overcome this scenario.
We are in ECC 6.2.
Do revert
Regards,

Found the solution. Just remove the tick from Include Invoice ref.in editing option.

Interest Calculation for special GL items

Hi Experts,
We have posted some special GL indicator documents for the vendors, but in the interest calculation, that is not coming up.
However the system is picking up all the others debit and credit items for that vendor.
So what could be going wrong for this vendor?
Thanks in Advance,
Jeenat

Hi,
Check the transaction code OBAB and assign your special GL transaction to your Interest Indicator.
This should solve your issue.
However this setting applies only for account balance interest calculation.
Regards,
Gaurav

Interest calculation only for open item for customers

Hi, do you know how to calculate Interest calculation only for open item for customers?I do not want to see cleared items. I have problem with customization.
Best Regards
Tom

In the item interest calculation, you can tick the 'open items' for calculation of interest and also select the 'no cleared items'.
Regards

Penalty Interest Calculation

Similar Messages

Maybe you are looking for