Pencil mark-ups disappear and Drawing Markups box goes black

As I use Adobe Reader X, after a few pages of using the Comment--Drawing Markups tools, like the pencil marks, these start going goofy, disappearing an reappearing. Also the Drawing Markups box goes black, the "find" windows starts to disappear too. Seems like something's corrupted. Can anyone help?
Thanks much.

Hi there
I also bought mine from the US, can't believe the sickening price difference. I've kept the powerlead for when I visit the states and want to use on my iPod charger and as Winston said, just used an existing powerlead (figure of eight). They're actually cheaper to buy than an airport-esque US to UK plug adaptor. The unit automatically does the 110/240v thing, so don't worry.
Regards

Similar Messages

Editing Pdfs using the Annotations and Drawing Markups

I regularly use the Annotations and Drawing markups on Pdfs on Mac to edit, but since updating to Adobe Reader 11 everything has gone haywire. The Pdf freezes constantly. Although I can still edit on screen, none of the Markup shows in the toolbar so I can't use it to review or navigate around the Pdf. I can't delete the Pop-ups or markup by right clicking as usual. The Save button in the top toolbar doesn't work - I have to go to the Drop down menu, which takes longer. It's impossible to close any Pdfs by clicking the red top left button - I have to go to the Drop down menu to close. It's hopeless! Any suggestions?

I have Adobe Reader XI version 11.0.9 and Mac OS X version 10.6.8. I wonder now if I have the right version ...

What happen to the underline on hyperlink it disappeared and yes the box is checked in tools

what happen to the underline on hyperlink it disappeared and yes the box is checked in tools

duplicated topic, continue here
*[https://support.mozilla.org/en-US/questions/989756 questions/989756]

I'm using CS6 created a new document. trying to use my layers and my work keeps going black. when I

I'm using Photoshop CS6, created a new document. trying to use my layers and my work keeps going black. when I click on the workspace i am able to see my work but when I move my mouse any little bit it goes black again.

Good day!
Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
Regards,
Pfaffenbichler

I have a ipod 4g and it keeps on going black ,

hi i have an ipod 4g and it keeps on going black , when i press the lock button it flashes the lock screen then it goes black again , i have tried the top and bottom button it did work for 2-5 mins then it goes back black again , i can still hear all the sounds when i get messages but i cant c them , WHAT DO I DO ????????? please help

Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

PlayBook lags and then the screen goes black and does not respond

Hello guys,
As the Subject line summarizes, my tablet was working like charm since the date of purchase, back then in April last year. However, on these days it has been performing weird. It has always been fast and smooth, but since last week it has been lagging and not no responsive to the touch.
To tell you gusy fast and clear, it boots up as normal, fast and smooth, apps open and close as usual. Then it starts to lag, and freezes for one second, responds and freezes again but this time will not respond again and finally the screen goes black and stucks there until I make a hard reset and it reboots normally, until it does it again, and again.
Relevant information:
16GB model, 1.5GB free storage available, sideloaded a few android apps today, recorded a few videos
the device manager software on the pc makes no difference, as the PB will anyway freeze and go all black even if it's backing up or something.
HELP?

Make sure any important data is backed up preferably by drag and drop to a pc.
When it is working properly, try gently squeezing the playbook between finger and tbumb around the black bezel border. Especially either side of the lower sockets. If it goes black it's probably a bad battery or screen contact.
1.5 GB is not much spare storage, by the way. I would never fill more than 75%.

Change default drawing markup color to black

hi,
I would like to change the default color of the drawing markups in adobe acrobat X pro from red to black.
Can you help me ?
thx

Right-click on tool, choose 'Tool Default Propeties', now changed color will be default color.

I have a PB G4 that won't start. It shows the gray apple screen, shows the blue screen, and then the screen goes black, and "sleep" light pulses.

I have a PB G4 that won't start. It shows the gray apple screen, shows the blue screen, and then goes black. The sleep light pulses. From there, I can't turn it off normally. I have tried restarting the PMU. And I have tried unplugging the ac adaptor and removing the battery. From there I have plugged only the ac adaptor in, and it will begin to start but do the same thing once it shows the blue screen.
I tried only using the battery (without plugging in the ac adaptor) and the same thing happens. I tried starting the computer while holding down CTRL, Option, P, and R, waiting to hear the start up chimes 3 times, and then holding Shift as it starts up. But I still get the black screen once I see the blue one, and the computer's sleep light pulses.
I need something very important from this computer. And was able to start it last night. I did not shut down the computer, and was going to take it to a friends to use his printer today. The computer was in sleep mode in the morning.
Thanks for any help!
Gina

What your describing could be a logic board or memory issue.
You did or did not hear 3 startup chimes? If you hear 3 chimes when you start it, that would indicate a memory problem. Try reseating the memory to see if that makes a difference. If you have 2 RAM cards, try one then the other in each slot. If you have 1 RAM card, move it to the other slot. Powerbooks can develop one bad slot.
You may need to pull the hard drive out of the Powerbook, put it into an external case, then read it from another mac.

I upgraded to Mavericks and my iMac monitor goes black randomly, but my attached cinema monitor stays active. I can fix it by putting it to sleep and waking it up again. But often it happens immediately after.

I have a 30in cinema display attached to my iMac and the iMac screen randomly goes black while the cinema stays active. I can put it to sleep and log back in which fixes it, but often it happens again immediately after. Sometimes it happens so quickly I can't even finishing logging in! I'd like to know if this is a Mavericks issue and I will roll my machine back. Thank you!

RocknOats
Wanted to update you on my situation with this.
So far 8 hours have gone by and I have not had a screen blackout.
FIRST I did the Hardware Test. TWICE on the extended test, the instructions on the KB Article explain. It took almost 3 hours, but while the test was running, both times, my computer screen did not go black.
I did get an error message, both times. Different each time. I looked up both of the error messages on discussion boards. Lots of conflicting info
One good thread said my first error was that my hard drive was bad and would probably fail.
The next error message I researched said that a fan was bad or needed replacement.
(information comes from other folks on discussion boards, not from Apple or technician)
Not sure what exactly those 2 error messages indicate but I followed a thread where someone found a solution by doing the following. So far it's worked.
After Hardware Test I did a shutdown and an SMC resest. Unplugged computer power source from wall and computer for about 10 minutes.
Finally after a restart I downloaded "SMC Fan Control" (CNET Downloads has a nice safe copy you can download)
There is a temperature monitor and from what I've read so far, keeping the CPU temperature under 50˚C is ideal. Making sure your fans and computer is in a well ventilated area/room too of course.
The SMC Fan Control helps you set your own speeds on the fans and so far everything has been going normal.

I just upgraded to 10...and now links and buttons black out when my cursor moves over them, and my entire window goes black whenever I scroll.

I just upgraded to Firefox 10 and had to go back to 3.6 because 10 doesn't seem to work on my computer. I have a windows 7 pc. After upgrading, whenever I moved my cursor over a button or link, that link blanks out or a black bock appears over it. Additionally, whenever I try to scroll, the entire window goes black until I stop scrolling.

Hi Nester88,
I'd try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit.
Hopefully this helps!

Did a firmware update 2/29/12 and now my second monitor stopped working, turns on and is detected but goes black

I did a recommended mac os update on 2/29/12. It also performed a firmware update. When I restarted my external second monitor came on and then went black. The monitor is detected and if I change it's size it comes on couple of seconds and goes black again. Any idea what might be the problem? No problems experiecned before update.
Model Name:          iMac
Model Identifier:          iMac12,1
Processor Name:          Intel Core i5
Processor Speed:          2.7 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          6 MB
Memory:          4 GB
Boot ROM Version:          IM121.0047.B1F
SMC Version (system):          1.71f22
Serial Number (system):          C0*******HJN
Hardware UUID:          1CF60534-6DD0-582B-9A78-A789EFD824C2
<Serial Number Edited By Host>

Well THANKS Matt_G..... I opened in safe mode and all my previously opened tabs, from when it last worked, displayed properly. I then started Aurora normally and it failed again so took your advice about disabling Add-ons and now all is working properly again. Not sure which Add-on it was because I disabled almost a of them since they really did nothing for me. I might go back tomorrow and try to find the one that did me in. Think that when you update Aurora it checks for new versions of Add-ons and that could also have gotten me.
Thanks again,
Rodger

I Mac won't start -- we get apple logo with spinning wheel, question mark that disappears and then a blank blue screen

My daughter's old I Mac won't start. It is not backed up. We want to get some things off of it if we can.
When we turn it on, we get the Apple logo with spinning wheel for awhile, then a question mark briefly and then a sky blue blank screen. Is there any hope of getting this to work? This computer is out of warranty. Does it seem that if we reinstall the Operating System we might find old data?

First try restarting with the original install disc an run Disk Utility to repair the drive. If you have to re install the OS make sure you select archive and install or else everything will be lost.

Macbook Pro 10.5.8- cursor disappears and freezes, iphoto editing goes beachball every time

Hi. I have looked for hours but cannot find exact solutions for these issues (or ones that I can understand), so I am sorry to be repeating what are apparently common problems. I have a 2009 MacBook Pro OS X 10.5.8 with 4 GB of memory. The first problem is intermittent in that occasionally, the cursor disappears then freezes up, and I have to use the keyboard to navigate. If I run my finger around the mouse pad for what seems like forever, it will move a little but is very uncoordinated. I can push the cursor in a general direction, but it overshoots the area I'm trying to move to. Sometimes, a restart will fix it. Other times, it eventually starts working again; how, I don't know. I've read lots of theories and solutions, but honestly they're all "reconfigure this," "reinstall the pram," "replace the logic board," "backup, delete, and install such and such," and I have no idea what half of it means. I run the basic software updates regularly, have deleted some unused apps and emptied the trash. No idea what a cache is or how to empty one...
The second problem is with iphoto ('09 version 8.1.2. 424), and it happens consistantly. When the editing features are used, it goes beach ball for several seconds, especially when using "retouch." I don't use cloud or iLife11 or anything that didn't come with the computer.
Any advice to a girl who understands very little about computers would be greatly appreciated. Thanks.

greytdogs wrote:
Any advice to a girl who understands very little about computers would be greatly appreciated.
Have someone look at your machine, discuss upgrading the operating system to 10.6.8 as it will run all your currently installed software (10.7 may not and require more memory, new software purchases)
Also to set up a TimeMachine backup system too.
We can only help those who can help themselves, some need someone to assist them in person.
It's no problem, I don't do my own dental or car work, I turn to those who can assist me with that.
Good Luck

Nowadays my iMac likes to slow down and its display suddenly goes black. why do these things happen?

I don't know why but a couple of days before, I opened a website and suddenly it became slow. Then the next day when I was opening something which I forgot what it was, and then it went black and I tried every button and suddenly the front row appeared. Today, after I logged in, I opened Safari and then it went black and when I pushed a random button, the log in box appeared. iMac is supposed to be immune to viruses right?

It sounds like you may have a failing hardware component. I would recommend you insert Disk 2 of your Original Installation disks that came with your iMac and boot from it by holding down the Option - D keys, and run the Extended Apple Hardware Test to diagnose what may be failing. It is unfortunately possible that you have an intermitent fault in your hardware that could be tough to find.
Hope this helps

I have a MacBook Pro with Retina display, when starting up, I see the Apple logo, the bar underneath fills about 1/4 of the way, and then the screen goes black, the mouse cursor is still visible.

Boots to black in OS X mode (I believe 10.10.2? tough to check right now). I can boot into Windows 8 using Boot Camp without incident. I have booted to Disk Utility and run Disk and Permissions Repair. I have booted into Diagnostics, and no issues were found (ADP000 was the Reference Code given). I reset the PRAM, which gave a louder chime than I had been getting when failing to start up OS X, but otherwise no change. Feeling that my options were exhausted, I attempted to restore from Time Capsule, and it won't connect to Time Capsule, despite Time Capsule being the active router whose network I am connected to. Please advise.
(This is my girlfriend's computer, she tells me that she selected an option to perform an automatic update later, that night.)

Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
      the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
           because it is three times faster than wireless.
This should install the version of OS X that you had installed.
Be sure you only work on the OS X volume, not your Windows volume. I cannot tell you if you will still be able to boot the Windows volume after the above. You will need to find a fix for that.

Pencil mark-ups disappear and Drawing Markups box goes black

Similar Messages

Maybe you are looking for