Pending Add request for all contacts when I log into Live Messenger

Each time I log into Windows Live messenger on my Blackberry Bold I get a request for every contact to allow them to add me as a contact.  They are longtime contacts of mine who have already been accepted.  They can see me regardless of if I accept.  If I accept, all of the requests reappear when I log back in.   I do not get the requests on the pc version.

I have this problem with 4 specific contacts - every time I log in I'm prompted to confirm/deny the requests! Running latest OS on a Bold and latest Live Messenger app. Any ideas?
I wouldn't mind too much if it didn't treat the requests as conversations and set the LED flashing at me constantly...
-SOLVED-
Log into the Live website at:
http://home.live.com/
confirmed the requests from there and all looking good so far!
Message Edited by mikecupcake on 03-24-2009 06:33 PM

Similar Messages

  • Lost all contacts when manually adding new ones

    Lost all contacts when manually entering new ones, how do I get them back? This is 2nd time this happened

    Same thing happened to me this evening.  I had 1700 contacts and was editing several contacts adding birthday and anniversay dates.  After entering dates successfully into the second contact, I did a search for a third contact and got "no results".  That's when I noticed that I had no contacts - not a single one.  Tried turning iPad 2 off and then back on - but no joy - zero contacts.  Not even an error message or beep or system reset - contacts just disappeared.  I suspect they are still on the device, but the Contact app link to the contact database file on solid state hard disk becomes corrupted.
    APPLE - This is a HUGE bug that needs to be fixed IMMEDIATELY!
    I have iPad 2 - 64gb - 3G/Verizon with 30 GB free. ios 4.3.3
    I hadiTunes set to sync my Contacts with Google Mail
    Additional info
    - Resyncing with iTunes restored 1752 contacts
    - I had recently used (24 hours earlier) "Dup Remover" app which worked beautifully, I which I have used successfully on my iPhone.  To be clear - running Dup Remover did NOT cause this problem, but I mention as this loss of contacts may occur as a result of a unique set of actions on iPad 2.

  • Adobe Connect Pro Add-In for All Users

    We need to install Adobe Connect Pro Add-In for all users in a Citrix environment. However, when installing the add-in there is no prompt to input a location. It directly installs the add-in on a specific user profile. Is there anyway to install this for all users as normal users do not have access to install anything on our environments? Please help as I cannot find any information on this.

    Hi kylemkr
    Please See the below doc : http://www.adobe.com/support/connect/downloads-updates.html
    http://helpx.adobe.com/adobe-connect/kb/connect-90-patches.html
    Hope it helps

  • Need to run the report for All Values when Null is passed in parameter

    Hi All,
    In my BIP report, I am using a parameter :asset with Type as Text, which means user will type the values for the parameter in the text box.
    Now, this parameter can take multiple comma separated values. I have a requirement to run the report for All Values when user doesn't enter any value in the parameter text box and if user enters any value(s) then the report will run for those values . The way, I tried to handle that in the query using couple of ways was :
    IMP : My Database is SQL Server
    where
    (table.asset = isnull((:asset), table.asset) or table.asset in (:asset))
    Now this works fine when I give a single asset number but when I give multiple values separated by comma like 123, 345 in the text box, then the statement fails saying 'encountered ,'
    I also tried simply
    table.asset in isnull((:asset),table.asset) -- but this doesn't work as it doesn't allow me to use in operater while using isnull and if i will use = operater then it won't work in case of multiple values
    Any suggestions on how can I handle this? Any help would be highly appreciated.
    Thanks,
    Ronny

    thanks for replying, but i tried this option too, it did not work for me, neither isnull nor coalesce. I mean, the solution work for single value but when i pass multiple values then separated by a comma then it doesn't work and shows me an error like "Incorrect Syntax ','". I am using SQL server as DB and bip is 10.1.3.4.1
    also please share the SR number, so i can also check the same.
    can there be any other work around to this?
    thanks,
    ronny

  • I have two iPhones. I just backed up all my photos on my old phone using iCloud but when I log into iCloud on my new iPhone nothing appears? The GB for the photos has been taken from my iCloud allowance so how do I retreive them on the new phone

    I have two iPhones. I just backed up all my photos on my old phone using iCloud but when I log into iCloud on my new iPhone nothing appears? The GB for the photos has been taken from my iCloud allowance so how do I retreive them on the new phone

    if you have a laptop just transfer them that way
    open the iPhone folder then DCIM then copy all photos off your old phone then open iPhone folder for the new phone the DCIM and paste all photos in their

  • When I receive an email request for a meeting, when I open it I get an error message asking if I want to revert to server, try again or ignore. If I choice revert to server it delete the event, if I choice ignore it accepts but won't sync with my other de

    When I receive an email request for a meeting, when I open it I get an error message asking if I want to revert to server, try again or ignore. If I choice revert to server it deletes the event, if I choice ignore it accepts it but won't sync with my other devices.

    Interesting suggestion, but it's not clear to me how I would do that if I'm not using an "(at) icloud.com" email address/account. I am having the same problem with changed invitations that come from an organizer who is using Google Apps. My email account is hosted at my ISP - it's not obvious to me how I can use iCloud to access that email account (and therefore the changed invitation). Suggestions?

  • Key focus is not visible for all objects when tabbing

    I'm using LabView 5.1.
    The key focus is not visible for all objects when tabbing through a "disabled and grayed-out" object.
    For example, let's say I create a panel with 3 buttons. If I create a "disabled" attribute for button 2 and assign the value "2" (disabled and grayed-out) to it. When I will run this VI, the key navigation will go through button 1 and button 3 (skipping button 2 as expected) but the key focus on button 3 will not be visible.
    Is this a bug with LabView or am I doing something wrong ?

    Hi Ben,
    Don't worry, time is not an issue... I'm posting an example of a VI with the problem I described. I noticed that the problem occurs only with "dialog buttons".
    When you have time, let me know if you see the same behavior. If you do, I will report the problem to National Instrument.
    Thanks for your time !
    BigBen
    Attachments:
    3buttons.vi ‏22 KB

  • Install Add-ons for All Users

    Salutations!
    I'm looking for a solution to install an add-on for all users. Specifically, we're using the Symantec PKI client (https://knowledge.verisign.com/support/mpki-support/index?page=content&id=SO27063&actp=search&viewlocale=en_US). The current version, as seen in the support page, has to be installed manually. the problem is, every time new user logs into the system with the latest version of the PKI client installed, this webpage will pop up, annoying users. As a workaround to this issue, I'm looking to install the add-on linked in on the support page and have it enabled for all users by default.
    I followed this article's chosen solution, but it does not appear to have installed the add-on: https://support.mozilla.org/en-US/questions/966922
    Any assistance would be appreciated! The version of firefox that I attempted the solution in was version 35.0.1, but most of our systems are running in the ESR channel, version 31.4.0.
    Cheers,
    Moose
    P.S. I've added the troubleshooting information, but my workstation is fairly unique, so I'm not sure if it'll be very applicable to most of the systems in our environment.

    It would seem like that article ''should'' solve the problem, but it doesn't seem to have had any effect. I extracted the contents of the .xpi file into the browsers\extensions folder using the extension ID, yet that doesn't seem to have done anything. I ran firefox after copying the uncompressed files with an administrator account with no luck. Any thoughts?

  • When i log into all my sites needing a password then close browserand reopen browserand i have to log into the site(s) agianevenwhenIsay remember me Ie facebook

    When i log into all my sites needing a password and username for example Facebook and Gmail then i close the browser with "remember me" selected it logs me out of Gmail and Facebook. Then i have to log back into the those sites again. This does not happen to me in Internet Explorer or Google Chrome.
    Firefox seems to save the password and username but logs me out of all my sites that needs a password and username after each session. This never happen to me before an Firefox update.
    The only way that i have found to work around this to keep Firefox open.
    Thanks

    The "remember me" checkbox instructs the site to set a persistent cookie in Firefox. Persistent means that the cookie is marked with a future expiration date so that Firefox retains it between sessions.
    There are a lot of ways to break this. For example:
    * Visit the site in a private window
    * Change Firefox's default setting of accepting persistent cookies from all servers (first party and third party)
    * Set Firefox to clear cookies at shutdown
    * Install add-ons that clear cookies
    * Use external cleaning/security/privacy software that clears Firefox cookies
    If you're not sure about your cookie settings, check out the Privacy panel of the Options dialog:
    orange Firefox button (or Tools menu) > Options > Privacy
    If you have "Firefox will: remember history" then cookies are accepted and retained.
    If you have "Firefox will: use custom settings for history" you can check your cookie settings below that line.
    If you have "Firefox will: never remember history" then you are going to be using full time private browsing and cookies are discarded between sessions.
    If cookie settings are okay, and you would like advice on your extensions, it would be helpful if you could post a list of them. Open the Troubleshooting Information page using either:
    * Help > Troubleshooting Information
    * type or paste about:support in the address bar and press Enter
    In the upper left corner, click the Copy text to clipboard button, then paste into a reply.
    After previewing, you will see there is some extra information below the list of extensions that you can edit out if you like.

  • Why will all the phone numbers on my phone not show up when I log into iCloud on my computer?

    Why will all the phone numbers on my phone not show up when I log into iCloud on my home computer?

    Hello tamivw,
    I read your post and I have linked to an article that will instruct you on how to access your iCloud contacts on a computer:
    This article is for Windows:
    iCloud Control Panel 3.1 for Windows
    http://support.apple.com/kb/DL1455
    This article will help you access the iCloud preferences where you can enable contact syncing:
    iCloud: Open iCloud preferences
    http://support.apple.com/kb/PH12802
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • When I log into hotmail, apple suggests thatI upgrade my browser, but when I click the link to so, apple just sends me a stream of promo copy and no means of requesting the upgrade.

    when I log into hotmail, apple suggests thatI upgrade my browser, but when I click the link to do so, apple just sends me a stream of promo copy and no means of requesting the upgrade.

    Hello lowellrich,
    Thanks for using Apple Support Communities.
    From your post it appears that you are getting a pop-up message that you need to upgrade your internet browser.  Likely this is an advertisement, as any updates to Safari are done through the software update in the App Store.  I'd like you to please check your preferences to ensure pop-ups are being blocked, and to also clear out the Safari data on your Mac.
    Security pane of Safari preferences - Safari Help
    Clear your browsing history - Safari Help
    Take care,
    Alex H.

  • I have deleted my photos but have icloud. when i log into icloud it doesnt give me an option to view these photos at all. my photo stream is only showing photos from another iphone in the house. i am unsure if i do a restore from back up if this will work

    I have deleted my photos but have icloud. when i log into icloud it doesnt give me an option to view these photos at all. my photo stream is only showing photos from another iphone in the house. i am unsure if i do a restore from back up if this will work. i really dont want to lose these photos but i am very unsure of what to do to resolve. can anyone please help?
    thank you

    If you had Photo Stream enabled with your iCloud account settings on the iPhone, photos in the Camera Roll should have been transferred to your photo steam automatically when the iPhone was connected to an available wi-fi network.
    Your photo stream is not available when logging in with your iCloud account with a browser on a computer.
    Why were the photos in the Camera Roll deleted?
    Photos/videos in the camera roll are included with your iPhones backup. If your iPhone's backup has not been updated since the photos were deleted from the camera roll, you can try restoring your iPhone from the backup.

  • My daughter is missing and has her iPhone 4S with her. When I log into iCloud it says online, location services off. Does that mean there is no way for me to track the phone?

    My daughter has been missing for a week and has a serious medical condition. She has an iPhone 4S and when I log into find my iPhone it says online , location services off. Does that mean there is no way to track the phone?  Please  I'm willing to try anything to get my baby home. Thanks.

    Without location services, there's no way the device can be tracked.  It's location services that provide the device's location to any apps that need that info, including the Find My iPhone service.  Sorry.

  • Hi i've just signed up for lightroom and when i go into the develop screen i get a blue screen with a cross through it and it says cant load picture. any idea how to get around this?

    hi i've just signed up for lightroom and when i go into the develop screen i get a blue screen with a cross through it and it says cant load picture. any idea how to get around this?

    I'm having same problem in develop module which is laggy as hell compared to LR5.8
    Library module is fine but develop module is slow as hell....5 seconds to make ANY adjustment.

  • Some of the messages in a gmail mailbox are missing.  I tried to select rebuild but this option is not available (i.e. it is greyed out).  Any suggestions?  The mail is all there when I go into the Google Mailbox.

    Some of the messages in a gmail mailbox are missing.  I tried to select rebuild but this option is not available (i.e. it is greyed out).  Any suggestions?  The mail is all there when I go into the Google Mailbox.

    I've ran the connection doctor and it's showing that the connection to the internet is fine
    What about the connections to the mail servers?

Maybe you are looking for