Pending State... for a day

I have an H.264 Blue Ray file I have exported from Premiere that is 22G. When I try to build the disc I keep getting an error about how it is in "pending state". I happened to have to do something and just left the program going thinking Encore just needed to do it's thing but that's been a day now and I still get the some message. Any ideas?

If exported as H.264 Bluray, you should use settings that allow it to show as "Do Not Transcode." The file may be a bit too big, depending on what else you have in the project.
Unrelated to that, it helps troubleshooting to use the "transcode now" option to separate problems with transcoding the asset from other issues in the project.

Similar Messages

  • App updates in a waiting state for 3 days....!!!

    Since upgrading to IO 6, I have several App updates and all have been in a waiting state for multiple days. Not one has loaded.

    The credit card on my accoutn has expired , so I have to enter another credit card information in the Settings>General > Store .
    Now I am able to install the apps , my compalin is that I should have got a message about the credit card while trying to install the apps , rather than that apps just disappearing without any message .
    Thasnk
    Bari

  • Pending charges for 6 days

    I tried to purchase best buy gift cards and the order was canceled. They are still showing as pending charges in my bank account and I would like to know when that will be taken care of. It's been almost a week.

    Greetings Karaw98, and welcome to the Best Buy forum!
    While an authorization request is not technically a charge, it can take up room on your credit card until it officially expires.  The time frame for an authorization request to expire can differ from bank to bank, but it is usually about 3 to 5 business days.  I looked over your order history and can see the order in-question was cancelled on 7/16/2015, so today would be the 3rd business day.
    I would strongly suggest that we allow a full 5 business days for the authorization request to expire.  Please feel free to send me a private message if the authorization request has not expired by 7/23/2015 and I will see what I can do to further assist.  To send a private message, you will want to login to the forum and click on the blue button in my signature that is labeled "Private Message."
    I hope that you have a wonderful day, and thank you for connecting with us.

  • Submission in Pending Status for Several Days

    I made my 1st submission of a touch screen.
    However, the status has been in Pending (step 7/7, in review) status for 4 working days. Is it normal?

    I made my 1st submission of a touch screen.
    However, the status has been in Pending (step 7/7, in review) status for 4 working days. Is it normal?
    Hi 
    Please mail to [email protected] for issue ask if you think the status long no update. 
    Thanks, Steve

  • Update statement for modifying day of the month

    Hi,
    i hope there is an easy answer to a question i'm probably over thinking. i have a situation where i need to update all the days in a date field to a certain day of the month regardless of the month or year. Here is an example of a small number of dates in the table:
    07/28/2004
    04/21/2008
    12/21/2011
    08/21/2006
    04/04/2008
    04/16/2012
    08/13/2011
    03/01/2006
    04/17/2012
    So, for each of these dates the day (or DD) would need to be converted to the 15th (ie. 07/15/2004, 04/15/2008, 12/15/2011, etc). I've used to_char to pull out just the DD, but am unsure what the update statement would need to look like. Any assistance would be greatly appreciated. Thank you!

    If you don't care about the time component
    UPDATE your_table
       SET your_column = trunc(your_column,'MM') + 14Justin
    Edited by: Justin Cave on Apr 26, 2012 9:47 PM
    Off by 1. Should be +14 not +15

  • HT4059 My purchased ibook has been in a "downloading" state for two days, on both my library, and in the store. Any solutions?

    My purchased iBook is stuck in a downloading state. Any solution?

    Thank you. I know you're all users and not official Apple tech support, but I also know that the results of these discussions make their way up to search engines, and that Apple has to be aware that the issues discussed here happen.
    As for the link to contact the iTunes support, I have already used that. I have a "ticket number" in their system, and have signed up for Apple to call me tonight after work. I was on hold with them yesterday for about 40 minutes, but had to hang up when my children's doctor called (they are both sick).
    I was just venting, in the hopes that my venting would find others in the same troubled spot and we could share our frustratons together.
    Thanks for trying to help and for listening.

  • Select statement for last day of the last quarter and first quarter

    Anybody provide me the single select statement which should result the last day of the last quarter and last day of current quarter?
    Ex: Select last date of the last quarter,last day of current quarter from XYZ(DUAL...)
    Thanks in Advance

    Hi,
    Here's one way:
    SELECT               TRUNC (SYSDATE, 'Q') - 1     AS prev_qtr_end
    ,     ADD_MONTHS ( TRUNC (SYSDATE, 'Q') - 1
                 , 3       
                 )                    AS this_qtr_end
    FROM    dual;TRUNC (dt, 'Q') returns the first day of the quarter containing dt.
    Subtract one day from that, and you have the last day of the previous quarter.
    Add 3 months to that, and you have the last day of the current quarter. ADD_MONTHS (dt, n) will always return the last day of a month if its first argument, dt, is the last day of a month.

  • IRP in Pending State

    Hi Experts,
    Does putting the IRP in pending state for long time creates latency in the system ?
    Regards,
    Lyf
    lyf4sci

    no, quite the opposite. it allows you to use the rest of the OS resources while processing of the request is happening.
    d -- This posting is provided "AS IS" with no warranties, and confers no rights.

  • Standby CM Hangs in pending state

    I have a Standby CM running 4.0.9 that we just installed. Tried to upgrade it to 4.0.19 and it just sat there in pending state for a long time. It appeared to be hung because I couldn't get to it remotely any longer. Rebooted the box and set it up as an AA instead. The game plan was to get it upgraded, then convert it to a Standby CM. So now the box sit's, showing online via the CM as a Standby CM (even though it's set to AA) and it still sits there in pending state. How can I get this resolved? TIA

    The Primary CM is running 4.0.19. I managed to blow it away in the Primary CM. Forced a CMS de-registration on the AA. Re-registered it as an AA and got the code upgraded to 4.0.19. (I did hit what I believe is a bug her which I will explain later). Now I need to change it's funtion to a Standby CM but I don't know if I can do this from the Primary CM.
    So the bug I hit was that when the WAAS was rebooted to load the new code I lost connectivity for a long time. Check the switch that it was connected to and saw the interface was up/down. Bounced the interface on the WAAS and it came back. Fortunate for me the box is in our DC. Had this been remote I'm not sure a bounce of the switch interface would have worked. FYI - I have my interfaces on an etherchannel with the load-balancing set to ip-dst (round-robin didn't work).

  • Is there a way to find out whether my imessages are being received by a specific iphone user or if there is a problem with their phone? Cannot get in touch with an out of state friend for several days.

    I'm looking for a way to check and see if a specific iPhone user is receiving my imessages or if there phone is not working properly.  I cannot get in touch with an out of state friend for several days and the only number I have is to their cell (iphone).  Thank you.

    YYou can only get a read receipt, not if they only received it.
    http://m.imore.com/how-turn-and-read-receipts-imessage

  • Daily User Stats of users log on for the Day

    Im need stats of users log on for the previous days on the system. Ive been to transation suim but I get stats on the users last logon. I require stats on a day to day basis so that I can anaylze how many users log on every day.
    Thank you
    [email protected]

    Hi,
    You could use Audit Logs:
    http://help.sap.com/saphelp_erp2004/helpdata/en/c7/69bcb7f36611d3a6510000e835363f/frameset.htm
    You specify the activities that you want to log in filters using the transaction SM19. You can read the log using the transaction SM20. You can delete old logs with the transaction SM18.
    Regards,
    Siddhesh

  • Pending Payments for more than 90 days

    Hi,
    I have two pending payments for more than 90days. I cant buy any more subscription, kindly help me cancel those where it would be better to save money on calling my home country. The status is pending from 14-Feb-2014. Thanks in advance.
    BR
    DJ

    please contact Skype customer service
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Batch is in pending state forever

    HI i had submitted a batch control LTRPRT through "batch job submission" page ,i had checked the batch job table and found that it is in pending state,I waited for one day and again checked but it was still in pending state
    1.what would be the reason?
    2.where can i configure batch server?
    3.what are essential settings for batch server?

    What CC&B version are you on?
    Pre OUAF 2.1 (until CC&B V2.0.5) , you needed the command based cron utility to be running - cdxCronBatch
    Post OUAF 2.1, you still have Command based daemon called submitbatch in addition to Online Batch Daemon.
    I assume you are on FW 2.2+, execute %SPLEBASE%\bin\submitbatch -e %SPLENVIRON% -s 60
    and look at 753301.1 white paper on Metalink for more details on configuring Online Batch Daemon.

  • Management Services and Repository pending state?

    I just rebuilt the repository for my EMGC(10.1.0) and everything is working fine except under unknown availability in the alert tab I have the entry "Management Services and Repository" - "Target is Temporarily in status pending state. Does anyone know what or how to get this out of the pending state? I shutdown EMGC and restarted it. I have rebooted the box, nothing seems to fix it, it has been this way for 4 days now.
    thanks
    Larry

    4 days? tried metalink yet?
    to get you started see note:
    290856.1
    If that doesn't help or you can't get anything else out of metalink, post again...

  • Pending state issue

    hi all
    i am attempting to run a large scheduling run of 3550 report instances. this is obviously going to take some time so is difficult to test within a decent time frame (3.5 days total - yes they are big)
    my problem is that some (20%) of the reports remain in a PENDING state.
    the code used to configure the schedule timing is
    setRightNow(true)
    setType(CeScheduleType.ONCE)
    the instance detail for one of the pending jobs is
    creation time: 2/26/2010 6:05 pm
    next run time: 2/26/2010 6:05 pm
    both the invoking java application and the enterprise server are on the same time, locale, etc
    can anyone help me out?
    cheers
    warwick
    Edited by: warwick.mayson on Mar 1, 2010 9:13 AM bad grammer

    You aren't going to get 3550 jobs running simultaneous, anyways.   Job Servers work by spawning child processes for report generation, and the maximum number of child processes are configurable in the CMC.
    There's two issues that's commonly encountered, of which one may apply to you:
    1. If the Enterprise Java SDK application is hosted on a different machine from the CMS service, you have to ensure that the two machines have their times synched using a time server.  When you schedule a report to run Right Now, the Right Now time is determined from the SDK app machine.  So if the times are out of synch, a job may wait in pending.
    2. Scheduling Web Intelligence jobs, you may encounter a problem where the Web Intelligence Job Server may respond very slowly when so many scheduled jobs are requested at once.
    If you set the schedule to not run "Right Now" but Once, where you stagger the start time of jobs, and the issue still occurs, I recommend opening a support case with SAP.
    Sincerely,
    Ted Ueda

Maybe you are looking for

  • E71 Messages are not being received by phone

    I am able to send messages to everyone but whenever somebody replies, I do not get a notification. I have to restart my phone everytime to get the messages that people sent me on my number. This is extremely annoying and was not the case before. Also

  • 11.3 update, podcasts won't update

    Updating podcasts had stopped working, so I updated to the latest release (11.3) but it still doesn't work. iTunes shows "last updated" as current time, so clearly thinks it's updating, but it's not. Sometimes, the update arrow spins round endlessly

  • How to fetch data for cash voucher

    Hi, I came to know that there is not direct connection to database tables. How to get the data for cash voucher? Thanks in advance,

  • Data Upload

    Good afternoon, morning, or night, I have a question and maybe one of you experts out there can help... My company is in the process of merging with another company and eventually all information will have to be in one system. What is the best manner

  • Wireless Apple Mouse Won't Right Click and how do I change the buttons

    Mouse won't right click and I want to swap the right and left button functions. How do I do this? Thanks