Pending Updates list does not change

I have 13 apps in the Pending Updates list, and even though they have been updated, they still show under Pending Updates list. Next to them the button from "UPDATE" now shows "OPEN" but they remain in this list.
I have updated to IOS 7. Upon updating, the phone showed that 13 apps required updating. I then tried to click on update all button but with no success. I also tried to update individually but also that was not possible, as app showed to be downloading forever-maybe server was slow.
Hence I downloaded all on the computer and synced. Now these apps remained in the Pending Updates folder on the phone. New updates have occured for new apps and they were updated on the phone and moved down, under the update date section. Except those 13 apps. Very frustrating. ANy help? Would a hard reset and restore work?

Similar Messages

IOS 7 app store update list does not clear after updates have been installed

iOS 7 app store update list does not clear after updates have been installed

Rifles wrote:
Good point, we will have to wait and see, it's a pity Apple has not produce an IOS7 PDF
You mean like this one?
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Best of luck.

"pending updates" status does not go away after updating apps

When I download app updates to my computer (Windows 7) via iTunes and then sync to either my iphone or ipad (iOS 8.1.2), the updates actually install and the apps can then be opened. However the status of the applications in the App Store remains as "pending updates", and the badge notifications do not go away, even if I do a hard reboot. If I update over wifi, there is no issue. This is very annoying. Any suggestions?

Ok since my last post the notifications does not go away on its own. There has to be a way to remove that...

2 Select lists do not change the value

Hi all,
I am having a situation. I have 2 select lists . The second one is dependent of the first one. Data are retrieved perfectly.
These select lists are done in page 0 and they are used in the referenced page. Apexlib is used in the page 0
When I change the item of the second list, the returned value used in a report, is ok. It takes the correct one.
If I change the item of the fist select list, the returned value of the second select list does not change(the displayed value are correct). the report is run (after changing the first select list) but the wrong returned value of the second list is taken.
The correct value of the second one is taken only if page is submited or we change the option.
it seems that it keeps the last value of the second list according to the previous selection.
Both select list is without submit.
How can I make a "refresh" of the returned values of the second select list (the records are ok) after changing the first one?
Thanks in advance
Raf

Hi Rafael,
is ApexLib integrated correct? Did you check against http://apexlib.oracleapex.info/howto_integrate_manual_steps.html ?
Or did you try and install the ApexLib Feature Demonstration Application and see if it works there?
brgds,
Peter
Blog: http://www.oracle-and-apex.com
ApexLib: http://apexlib.oracleapex.info
Work: http://www.click-click.at

HT5824 my contact list does not update to its current state. After I sync to Itunes or after I back up to I cloud Also I did a doccuments and data restore and it still didnt change. How do I fix this?

My contact list does not update to its current state after I sync it to itunes or back it up to icloud I did a documents and data reset and the contact list still didnt change.. How do I fix this?

Welcome to the Apple Community.
First check that all your settings are correct, that contact syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the contacts you are adding are added to your 'iCloud' group and not an 'On My Mac', 'On My Phone' or other non iCloud group (you can do this by checking in groups), non iCloud contacts will not sync.
If you are sure that everything is set up correctly and your contacts are in the iCloud group, you might try unchecking contact syncing in the iCloud settings, restarting your device and then re-enabling contact syncing.

Once I accept a calendar invite on my iPhone, I cannot delete or otherwise modify it. Even when it is updated or deleted by the invitor, it does not change on my iPhone. Is there a fix for this?

Once I accept a calendar invite on my iPhone, I cannot delete or otherwise modify it. Even when it is updated or deleted by the invitor, it does not change on my iPhone.

My husband and I both have iphone 4's and we both have this same problem. I have an open ticket with apple, but so far they haven't been able to figure this out. First, they told me the problem was the mail server I was using. So, I tried sending/receiving invites from gmail and yahoo which they told me should work. Neither did. It doesn't matter whether the original invite was created in iCal or in Outlook or Google, once I open the invite in my mail and hit "add to calendar" the event is locked into my calendar. If the originator sends an update or cancels the meeting, I will receive an email with the new info, but the event doesn't change in my iphone calendar. This is completely lame. Why bother putting a calendar app on the phone if it can't handle basic functions?
Did you ever get a response from anyone or figure out a workaround? I'll post if I hear back from Apple with a fix.

After updating to 4.4.2 the notification light does not change colors. How do I fix this?

After updating to 4.4.2 the notification light does not change colors. It only blinks one color. How do I fix it?

Hello Saralynn43. Getting new updates is always fun, but then there are certain changes that can take some getting used to! This may be one of these cases where there may have been a change done to the notification system. What are the notifications that have been affected with the color change? Let us know as we'd like to look into this for you. Thank you.
NicandroN_VZW
Follow us on twitter @VZWSupport

After updating apps list does not clear

after updating apps list does not clear

Easiest way to clear list is; go to settings>general>date and time and set date manually to a point at least one month in the future (I set mine to two months ahead) and then open App Store and check for updates. The list should now be clear. This is just an update history list. When finished just turn on auto date/time or set it back manually if you like and list should still be clear. If you do nothing the updated apps should start to drop off the list in about two to three weeks.

TS3297 my itunes wish list does not have a purchase allbutton why not it did before

My itunes wish list does not have a purchase all button anymore why not?

You don't think we've all done that?.............numerous times!
Ever since this change came out I sent feedback the very next day and several times since.
We've had iTunes updates since and Apple just doesn't seem to think it's a big deal.
Why would they get rid of it to begin with?
I don't purchase a can of beans, one bean at a time.

SharePoint Calendar "List does not exist " when new item

Hello Everybody,
The scenario is as follows:
I added a new list called "Calendar" and I created a new view to put it in a subsite. Then I did the following process in SPD:
After creating the list I went to the "Web Part" and exported it as a file, then I inserted into SharePoint as a web part.
Everything was ok so far. When I tried to add an event / Item to the calendar, it displays a message that says the list does not exist.
***************ERROR:
List does not exist.
The page you selected contains a list that does not exist. It may have been deleted by another user.<nativehr>0x81020026</nativehr><nativestack></nativestack>
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: List does not exist.
The page you selected contains a list that does not exist. It may have been deleted by another user.<nativehr>0x81020026</nativehr><nativestack></nativestack>
This happend because i'm trying to add this web part in another subsite.
Thanks in advance.

Hi,
This issue is due to that the WebId property in the exported web part file is not referring to the web where the list exists.
I recommend to edit the exported file and then search for “WebId”, and then change the value to the GUID of the web where the list exists.
To get the GUID of the web, use this command: Get-SPWeb -site http://yoursitecollectionURL | select URL,ID.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Workflow 2013: List does not exist error

Hello everyone,
I am creating a SharePoint Designer 2013 workflow and I encountered an error which suspends
my workflow. I've noticed that it only occures when I reference a lookup column to another list. The error details that I get from the browser are:
RequestorId: a85c9496-5e1c-cb59-0000-000000000000. Details: RequestorId: a85c9496-5e1c-cb59-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 404 {"error":{"code":"-2130575322, Microsoft.SharePoint.SPException","message":{"lang":"en-US","value":"List does not exist.\u000a\u000aThe page you selected contains a list that does not exist. It may have been deleted by another user."},"innererror":{"message":"List does not exist.\u000a\u000aThe page you selected contains a list that does not exist. It may have been deleted by another user.","type":"Microsoft.SharePoint.SPException","stacktrace":" at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)\u000d\u000a at Microsoft.SharePoint.Library.SPRequest.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)\u000d\u000a at Microsoft.SharePoint.SPListCollection.EnsureListsData(Guid webId, String strListName)\u000d\u000a at Microsoft.SharePoint.SPListCollection.ItemByInternalName(String strInternalName, Boolean bThrowException)\u000d\u000a at Microsoft.SharePoint.SPListCollection.GetList(Guid uniqueId, Boolean fetchMetadata)\u000d\u000a at Microsoft.SharePoint.SPListCollection.GetById(Guid uniqueId)\u000d\u000a at Microsoft.SharePoint.ServerStub.SPListCollectionServerStub.InvokeMethod(Object target, String methodName, ClientValueCollection xmlargs, ProxyContext proxyContext, Boolean& isVoid)\u000d\u000a at Microsoft.SharePoint.Client.ServerStub.InvokeMethodWithMonitoredScope(Object target, String methodName, ClientValueCollection args, ProxyContext proxyContext, Boolean& isVoid)\u000d\u000a at Microsoft.SharePoint.Client.Rest.RestRequestProcessor.InvokeMethod(Boolean mainRequestPath, Object value, ServerStub serverProxy, EdmParserNode node, Boolean resourceEndpoint, MethodInformation methodInfo, Boolean isExtensionMethod, Boolean isIndexerMethod)\u000d\u000a at Microsoft.SharePoint.Client.Rest.RestRequestProcessor.GetObjectFromPathMember(Boolean mainRequestPath, String path, Object value, EdmParserNode node, Boolean resourceEndpoint, MethodInformation& methodInfo)\u000d\u000a at Microsoft.SharePoint.Client.Rest.RestRequestProcessor.GetObjectFromPath(Boolean mainRequestPath, String path, String pathForErrorMessage)\u000d\u000a at Microsoft.SharePoint.Client.Rest.RestRequestProcessor.Process()\u000d\u000a at Microsoft.SharePoint.Client.Rest.RestRequestProcessor.ProcessRequest()\u000d\u000a at Microsoft.SharePoint.Client.Rest.RestService.ProcessQuery(Stream inputStream, IList`1 pendingDisposableContainer)","internalexception":{"message":"List does not exist.\u000a\u000aThe page you selected contains a list that does not exist. It may have been deleted by another user.<nativehr>0x81020026<\/nativehr><nativestack><\/nativestack>","type":"System.Runtime.InteropServices.COMException","stacktrace":" at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)\u000d\u000a at Microsoft.SharePoint.Library.SPRequest.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)"}}}} {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["16"],"SPRequestGuid":["a85c9496-5e1c-cb59-926d-c42a33d8ba0a"],"request-id":["a85c9496-5e1c-cb59-926d-c42a33d8ba0a"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1; RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Fri, 14 Feb 2014 07:34:01 GMT"],"Server":["Microsoft-IIS\/8.0"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
I have "Workflow Manager 1.0" and "Workflow
Manager 1.0 Cumulative Update" installed on my system. Workflow is installed on the same machine that is part of my Sharepoint Server farm.

Hello again,
The main error before workflow goes into suspend state is:
Leaving Monitored Scope (Request (GET:http://portaldev:4949/sites/ahmetc/_vti_bin/client.svc/web/lists/getbyid(guid'00000000-0000-0000-0000-000000000000')/Items(12)?%24select=ID%2COData__x00c7_al_x0131__x015f_anId%2COData__x00c7_al_x0131__x015f_an%2FTitle&%24expand=OData__x00c7_al_x0131__x015f_an)). Execution Time=199,534018988447
The guid part returns zero. I don't know why or how.
Other logs that can be helpful are:
...edScope(Object target, String methodName, ClientValueCollection args, ProxyContext proxyContext, Boolean& isVoid) at Microsoft.SharePoint.Client.Rest.RestRequestProcessor.InvokeMethod(Boolean mainRequestPath, Object value, ServerStub serverProxy, EdmParserNode node, Boolean resourceEndpoint, MethodInformation methodInfo, Boolean isExtensionMethod, Boolean isIndexerMethod) at Microsoft.SharePoint.Client.Rest.RestRequestProcessor.GetObjectFromPathMember(Boolean mainRequestPath, String path, Object value, EdmParserNode node, Boolean resourceEndpoint, MethodInformation& methodInfo) at Microsoft.SharePoint.Client.Rest.RestRequestProcessor.GetObjectFromPath(Boolean mainRequestPath, String path, String pathForErrorMessage) at Microsoft.SharePoint.Client.Rest.RestRequestProcessor.P...
...ter, Int32& plRecycleBinCount) at Microsoft.SharePoint.Library.SPRequest.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount) --- End of inner exception stack trace --- at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx) at Microsoft.SharePoint.Library.SPRequest.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilt...
SocialRESTExceptionProcessingHandler.DoServerExceptionProcessing - SharePoint Server Exception [Microsoft.SharePoint.SPException: List does not exist. The page you selected contains a list that does not exist. It may have been deleted by another user. ---> System.Runtime.InteropServices.COMException: List does not exist. The page you selected contains a list that does not exist. It may have been deleted by another user.<nativehr>0x81020026</nativehr><nativestack></nativestack> at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boole...
Original error: Microsoft.SharePoint.SPException: List does not exist. The page you selected contains a list that does not exist. It may have been deleted by another user. ---> System.Runtime.InteropServices.COMException: List does not exist. The page you selected contains a list that does not exist. It may have been deleted by another user.<nativehr>0x81020026</nativehr><nativestack></nativestack> at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWri...

I am in Muse 2014.3. When I edit a page, in the preview everything looks fine, but when I upload it to FTP, the page does not change, even when I upload the whole site. Is this a bug? I don't know what to do.

I am in Muse 2014.3. When I edit a page, in the preview everything looks fine, but when I upload it to FTP, the page does not change, even when I upload the whole site. Is this a bug? I don't know what to do.

Hi Jaap,
Are you sure about your FTP credentials (FTP folder and site URL) that you are using for the upload? Are you able to see the updated files in the remote directory of the FTP server, after you finish uploading the muse file, using an external FTP client like FileZilla?
Thanks
-Prashanth

List View webpart from subsite to Top site shows random error "List Does not exist"

Hi All,
We have a list in subsite and we are creating a view for that list which we are showing in one of the top site home page. We have taken care of changing the web and list guid of list view webpart when we added on top site. Its working fine but some time
shows error "list does not exist" but when we refresh the error goes. Is it known issue or if there is any workaround for this? because we cannot go live with this random error.
Rohit Pasrija

try these links:
http://mroffice365.com/2012/01/sharepoint-display-a-list-or-library-from-subsite-to-the-top-level-site/
http://sharepoint.stackexchange.com/questions/37140/display-list-or-library-on-another-site-as-webpart

SQL execution does not change, but consistent read get higher

Hi,
Our SQL query execution does not change, but consistent reads get higher in our test enviroment but query looks fine in our development and production environments.
In the Development instance the trace is:
STAT #18446744071526492680 id=1 cnt=1 pid=0 pos=1 obj=7151 op='TABLE ACCESS BY INDEX ROWID MEMBER_CMS_SITE_ACCESS (cr=4 pr=0 pw=0 time=153 us cost=3 size=68 card=1)'
STAT #18446744071526492680 id=2 cnt=1 pid=1 pos=1 obj=7152 op='INDEX UNIQUE SCAN MEMBER_SITE__MEMBERID_SITEID (cr=3 pr=0 pw=0 time=104 us cost=2 size=0 card=1)'
So - we read 3 blocks from the index and then 1 from the table ( to make 4)
In the Test instance the trace is:
STAT #18446744071411593144 id=1 cnt=1 pid=0 pos=1 obj=7151 op='TABLE ACCESS BY INDEX ROWID MEMBER_CMS_SITE_ACCESS (cr=112 pr=0 pw=0 time=2820 us cost=3 size=70 card=1)'
STAT #18446744071411593144 id=2 cnt=1 pid=1 pos=1 obj=7152 op='INDEX UNIQUE SCAN MEMBER_SITE__MEMBERID_SITEID (cr=3 pr=0 pw=0 time=90 us cost=2 size=0 card=1)'
We read 3 blocks from the index but the table needs 109 more which cannot possibly be right.
It looks like we are applying UNDO and those 109 are the work needed to do so.
I have tried flushing the shared pool, and killing some sessions that could possibly be the cause... but with nothing in V$TRANSACTION
I could understand this if there was a long-running transaction that's created a lot of dirty blocks, but there are no transactions at all... so it's not that.
Thanks

The SQL is very simple with only one predication in the where cluse and that is indexed,just like
"select * from table where a=:b0"
Column a is indexed. But ORACLE choose FTS not INDEX SCAN because of out-of-date stats maybe.
So I updated the stats expecting to see ORACLE will choose INDEX SCAN. The fact is that ORACLE will not change existing FTS to INDEX until I flush the entire share pool.That's the problem.

InputListOfValues. returnPopupListener does not change Value in ADFTable.

Hello!
Maybe my approach is incorrect? I want, that inputListOfValues has returned values in two fields of ADFtable.
I have inputListOfValues. It has returnPopupListener = returnListener.
<af:inputListOfValues label="#{bindings.myCVO1.hints.ID.label}"
popupTitle=""
id="IDid"
value="#{row.ID}"
returnPopupListener="#{backingBeanScope.backing.returnListener}"
model="#{bindings.IDListOfValue.listOfValuesModel}"
searchDesc=""/>
Problem: In ADFTable value does not change. And in viewobject value has changed.
public void returnListener(ReturnPopupEvent returnPopupEvent) {
//access UI component instance from return event
RichInputListOfValues lovField =
(RichInputListOfValues)returnPopupEvent.getSource();
//The LOVModel gives us access to the Collection Model and
//ADF tree binding used to populate the lookup table
ListOfValuesModel lovModel = lovField.getModel();
CollectionModel collectionModel =
lovModel.getTableModel().getCollectionModel();
//The collection model wraps an instance of the ADF
//FacesCtrlHierBinding, which is casted to JUCtrlHierBinding
JUCtrlHierBinding treeBinding =
(JUCtrlHierBinding) collectionModel.getWrappedData();
//the selected rows are defined in a RowKeySet.As the LOV table only
//supports single selections, there is only one entry in the rks
RowKeySet rks = (RowKeySet) returnPopupEvent.getReturnValue();
//the ADF Faces table row key is a list. The list contains the
//oracle.jbo.Key
List tableRowKey = (List) rks.iterator().next();
//get the iterator binding for the LOV lookup table binding
DCIteratorBinding dciter = treeBinding.getDCIteratorBinding();
//get the selected row by its JBO key
Key key = (Key) tableRowKey.get(0);
Row rw = dciter.findRowByKeyString(key.toStringFormat(true));
DCBindingContainer binding=(DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding iterator=binding.findIteratorBinding("myIterator");
ViewObjectImpl vo=(ViewObjectImpl)iterator.getViewObject();
Row row=vo.getCurrentRow();
System.out.println(vo.getCurrentRowIndex());
row.setAttribute("ID",rw.getAttribute(0));
row.setAttribute("Name",rw.getAttribute(1));
//In viewobject value has changed.
System.out.println(row.getAttribute("ID")+" - "+row.getAttribute("Name"));
}

Frank, I have defined in the model multiple attributes:
<ListBinding
Name="LOV_SpecialServiceGid"
ListVOName="AccessorialCodeVO1"
ListRangeSize="10"
NullValueFlag="none"
NullValueId="LOV_SpecialServiceGid_LOVUIHints_NullValueId"
MRUCount="0">
*<AttrArray Name="AttrNames">*
*<Item Value="SpecialServiceGid"/>*
*</AttrArray>*
*<AttrArray Name="DerivedAttrNames">*
*<Item Value="SpecialServiceDesc"/>*
*</AttrArray>*
*<AttrArray Name="ListAttrNames">*
*<Item Value="AccessorialCodeGid"/>*
*<Item Value="AccessorialDesc"/>*
*</AttrArray>*
<AttrArray Name="ListDisplayAttrNames">
<Item Value="AccessorialCodeGid"/>
<Item Value="AccessorialDesc"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
But value is returned only in SpecialServiceGid, in SpecialServiceDesc is not returned.
In pageDefinition has defined:
<listOfValues StaticList="false" IterBinding="ShipmentStatusCVO1Iterator"
Uses="LOV_SpecialServiceGid" id="SpecialServiceGidListOfValue"/>
Maybe I have not identified all in pageDefinition?

Pending Updates list does not change

Similar Messages

Maybe you are looking for