"pending updates" status does not go away after updating apps

When I download app updates to my computer (Windows 7) via iTunes and then sync to either my iphone or ipad (iOS 8.1.2), the updates actually install and the apps can then be opened. However the status of the applications in the App Store remains as "pending updates", and the badge notifications do not go away, even if I do a hard reboot. If I update over wifi, there is no issue. This is very annoying. Any suggestions?

Ok since my last post the notifications does not go away on its own. There has to be a way to remove that...

Similar Messages

  • Download notification for Security Update 2014-002 does not go away after update

    I have downloaded the Security Update 2014-002 4 times tonight, it shows up in the downloaded and installed list, but it still is showing up as an update ready to download. I restarted my machine each time, but it still is showing up in the update notifications. Can anyone help?
    Thanks,
    George

    Go to the command line of the appliacne and run "version"
    That will show you the current version of the firmware.
    If you have record of what was there, you can compare...
    Otherwise contact TAC, they can verify that you have the up-to-date version and pull your serial from the distribution list so you don't see it any more.
    Ken

  • The software update badge does not show on the settings app on iphone 4s?? How to fix it?

    Hi ,
    I have a new iphone 4s and since i have baught , the new software update badge does not show on the settings app icon in my phone ,
    Though the new update shows in the software update menu.
    Any idea how to make the icon show the badge ???

    Software Update option is only available if you have IOS 5 or above.
    Your iPhone 3G IOS 4.2.1 is the end of line, there's no more update for this model.

  • New Macbook Pro does not start up after updating...HELP!!!

    Hi,
    My new Macbook Pro does not start up after it got updated. The first time I used it, it was perfect. I updated it and restarted it when it told me to but it doesn't boot. It shows an apple and a spinning circle when it turns on but that's it.
    Can somebody please help me?

    You should probably post your question in the MacBook Pro discussions:
    http://discussions.apple.com/category.jspa?categoryID=190

  • Last Notification does not go away after clicking on it.

    How is it when i download a app or even update one when the app is completed downloading or updating, the notification that will pop does not go away once pressed to be acknowledge? How do i go about fixing this or what tricks can i do to avoid turning my tablet in for warranty.

    Ok since my last post the notifications does not go away on its own. There has to be a way to remove that...

  • Sandclock does not go away after download of a file

    hi !
    i am able to download a file properly by getting the open/save dialog box.i am doing this by calling the jsp code from an html page. I have closed all the outputstream properly.but the sandclock does not go away even after downloading of the file.
    Can anybody explain why?
    Thanx in advance.
    geeta

    well can you post your jsp code, this may help in a better way to tell you whats going wrong,
    onething you can try -> once the file is downloaded add a redirect stat and check ( this is only to test whats happening ) ;
    Thanks

  • Iphone does not turn on after update to ios 7

    My iphone dies not turn on after update to ios 7
    it keeps showing the message : (connect to itunes)

    What type of computer do you have?
    Were you updated to the latest version of iTunes?
    You may need to follow these steps:
    http://support.apple.com/kb/TS3281?viewlocale=en_US
    Good luck!

  • Script does not work anymore after updating to FM 12.0.3

    Hi,
    With TCS5, Robohelp would crash when importing FrameMaker books to RH, because the FM files had embedded graphics. So, I found a script to externalize the graphics before doing the import (the script is: ExtendScript of the week: Externalizing Graphics « TechComm Central by Adobe). However, this script is not working since I updated from 12.0.2 to 12.0.3. And without this script, we can't create HTML5 output!
    Although I wrote a few simple scripts, this one is quite complex and would be difficult to debug. Anyone here knows what could have changed to make the script useless after such a small update? Or can update this script to make it work?
    Thanks!

    Hi again,
    For those who would like to know... I made this script work with 12.0.3. I simply removed the instructions that  added an item in the File menu and stuff about a report, which I don't think ever worked. So, I still don't know exactly why it didn't work anymore (don't have time or knowledge to investigate), but I'm still interested to know.

  • "Updating Playlist" does not go away

    I got the red 2nd generation Ipod nano recently and connected it to my IBook G3 - it automatically created a new playlist which it synced with the Ipod and copied all the songs over - all automatically.
    Now later, I modified this particular playlist somewhat and again connected the Ipod hoping it will sync automatically, which it started doing - but the problem is that the "Updating Playlist" message on iTunes and "Do Not Disconnect" on the iPod do not go away for hours together. I thought it was just taking long, so I left it connected all night long last night, but it still hadn't finished in the morning. So I had to force quit ITunes and disconnect the IPod by dragging it into trash.
    Can anyone please tell me why this is happening - I haven't tried the 5Rs yet - maybe that'll work.
    Thanks.
    iBook G3   Mac OS X (10.3.2)  
    iBook G3   Mac OS X (10.3.2)  
    iBook G3   Mac OS X (10.3.2)  

    Sometimes software-problems can be fixed when you restore your ipod complete.
    try it.

  • Fox tab does not go away after being launched

    Just recently about a week a go fox tab stopped working. As in when it is launched and i click on a tab it does not go a way and i have to close the browser and open it a gain to get rid of the fox tab screen.
    I hope someone can help.
    I am running Firefox 18.0.1, fox tab 1.4.5 and flash plugin 11.5.502.146.

    See these articles for some suggestions:
    *https://support.mozilla.org/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
    *https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
    If you do not keep changes after a restart then see:
    *http://kb.mozillazine.org/Preferences_not_saved

  • Desktop does not recognize 8310 after update to 6.0.1

    The BlackBerry desktop software does not recognize my 8310 after updating to 6.0.1. I am running Vista 64bit, SP2. When I go into the device manager it shows a yellow triangle and says I need to update my driver. Do I need to go back to an earlier version of desktop?

    To manually install the driver:
    On the computer, right-click My Computer and click Properties.
    Click the Hardware tab, and then click Device Manager.
    Expand the BlackBerry category and verify that BlackBerry Smartphone is listed.
    If an exclamation mark is displayed, right-click the smartphone and click Update Driver.
    If the Hardware Update Wizard prompts you to use Windows Update, select No not this time and click Next.
    Select the Install from a list or specific location option and click Next.
    Select the Don't search. I will choose the driver to install option and click Next.
    Click Have Disk and then select Browse.
    For 32-bit Windows browse to C:\Program Files\Common Files\Research In Motion\USB Drivers. For 64-bit Windows browse to C:\Program Files (x86)\Common Files\Research In Motion\USB Drivers.
    Double-click on RimUsbNT.inf, click OK, and then click Next.

  • HT4623 my iphone does not turn on after update to ios 7

    Kindly help me to solve this problem
    I updated my iphone to the new ios 7
    but the iphone does not turn on
    when i turn on it gives Hello slide to set up
    then after that it shows the message connect to itunes
    i connected and restored the backup
    synczed already
    but the iphone does not turn on
    only showing the message 'connect to itunes"

    Something has become corrupted hold down the Home and Power Button whilst plugged into Computer and with iTunes open it should then find a iPhone in recovery mode reinstall the software and the back up it sounds like the back up had something wrong and has put this on to the new install.

  • My wacom tablet does not work correctly after updating to mavericks.

    My wacom doesn't work.

    Jason, how did you switch back? My tablet does not work either. All I can do for the moment is work on my laptop which has the old system.
    Thanks,
    Teresa
    I was almost certain that the new osx would be trouble as was Lion and after that Mountail Lion. So, instead of my usual hard drive clone, which I make with superduper, I made a second one just to be certain. After 10 minutes of Mavericks, I am happy back to snow leopard.
    I really think that it is the most developed, glitch free operating system. If it wasn't for all these money thirsty companies stopping the support of the previous op. systems perhaps we could stop at Snow leopard. What more to ask. Even aesthetically osx 10.9 is much worse that snow leopard.
    Anyway, long answer. sorry. It is a good habit to clone your HD once in a while.
    p.s. my only reason for wanting to upgrade is because Lightroom stopped support but I am still doing my work with the previous versions. I guess people will allways think that if they have the newest, biggest, baddest version of a software will make them better in what they do..or in who they are, really.

  • Nokia 206 does not turn on after update

    Hi
    Just got a Nokia 206
    Updated the software. Itupdated and restarted fine
    Then I checked for updates again, and it updated a second time
    Everything went fine, and the phone restarted. It said "Update Successful" or something like that
    I remember that the SW version was from May 2013 (first update was MArch 2013 I believe)
    I tried to update a 3rd time and it said that there were not more update availabale
    I was happy !
    I checked that internet worked, sent an email, everything worked fine
    Then I turned off the mobile to try another SIM card, but when tunring it on, the screen goes black, then "NOKIA" is displayed on the screen for few sec, then the phone turns off
    I tried to :
    _ different SIM cards
    _ using 1, 2 or 0 SIM cards
    _ holding power button up to 10 - 15 sec (hopping it will do some reset)
    _ tried to find a hard reset button, but did not find...
    So basically, the phone is not turning on. Only "NOKIA" is written for few sec, then phone turns off again
    The phone is un-usable as such
    Please Nokia, what should I do to fix that ?
    Regards
    Bastien

    when I plug the power supply, the charging icone shows up
    When I try to start the phone then, the screen gets all white for less than a second, then black for 1 to 2 seconds, then all white for less than a sec again, then turns off
    When I press again, it goes back to the charging icon (the white and orange battery charging)
    Also, I forgot to mention that sometimes, it does not do the short vibration it used to do when trying to turn on

  • Remote does not work correctly after update

    Hello,
    the subject explain it already:
    After upgrading to 2.3 the apple remote does not work correctly anymore:
    I need to push the buttons twice, and than atv is only reacting sometimes.
    Any ideas?
    BR
    Frank

    Same problem here. First, I thought it was the Apple remote's battery. I replaced that and the problem persisted. I then used my digital video camera to verify that the remote was actually transmitting infrared, it was. In frustration, I tapped the buttons rapidly while pointing at the Apple TV. The Apple TV responded. The next button press it failed to respond. I tapped rapidly again and it finally responded. After many many rapid presses, while pointing directly at the Apple TV, it finally began responding to all presses. Once I'd regained control (I thought) I unpaired and re-paired the remote. Everything continued to work. At that time I also saw that I could "learn" another remote. So, I set up my Samsung TV remote. Sweet. Until the Apple TV went into screensaver mode again and I had to go through the same rapid button press sequence... with either the Apple remote or my learned Samsung remote. Conclusion, since the Apple TV will become fully responsive after the rapid button press sequence, it is certainly a software related problem.

Maybe you are looking for

  • Hide Print Button On Bill After Click

    hi, i have to create a bill and create a Print Button On this bill . Now I want when i click on that button then generate a pop up and ask do you want to prient .If i press ok then prient button should be hide and print the bill. How can i hide butto

  • Program doesnt work, tried to make it into array list

    I tried to change this from an array to arraylist and all i got was allot of errors! i was wondering if anyone could help? import java.util.*; import chn.util.*; public class final_proj public void quicks(int first, int last); int g = first, h = last

  • Creative MediaSource Playlist problems!!

    (Creative MediaSource Playlist problems!!i Hello!? I am having a huge problem trying to add music to my playlist that I created using MediaSource (I have a 30GB Zen Vision M) I'll create the playlist, but it is only saving the last track(s) I added t

  • I would like to change my Skype username

    I know that this is a topic that most people get annoyed with answering, but I feel like this is really important to me as well. See, I made my Skype account back when I was in seventh grade and in my scene and 'edgy' phase and so it's kind of innapp

  • Extending Views

    I have extended all the password views to support an attribute that needs to be updated when the password is changed or reset. I am able to update the attribute via the password views. I am not able to reference the value of this attribute with the p