Pendrive isn't working properly with my Hp laptop!

I am using HP Probook 4441s laptop but pendrive isnt working properly in my laptop. It takes quite too many times to get connected with my laptop. I have apacer 16GB pendrive. Please help

Hi nrony,
Your ProBook 4441s is a commercial product and to get your issue more exposure I would suggest posting in the commercial forums. Here is a link to the Commercial Notebook forum.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Similar Messages

  • Why isn't the scroll wheel working properly with Firefox 4?

    I have a new Windows 7 PC at work with Firefox 4 on it. The scroll wheel on my mouse is not working right. It will work if I use Internet Explorer but I have trouble getting it to work with Firefox. Usually what I have to do is click the wheel to get that mode of scrolling where you move the mouse up and down to scroll the screen and that will work. And then when I click the wheel again to get out of that mode, my scroll wheel will work as expected. But I don't want to have to do that all the time. And sometimes that trick doesn't work. The scroll wheel is working fine with MS Excel and Lotus Notes and Internet Explorer, etc, so it seems to be something the new Firefox has an issue with.

    I fixed my problem! I was messing around in msconfig to turn off Lync from my Startup list and noticed something called Mouse Suite 98 was in my Startup. I did a quick google check and learned I could remove it without doing any harm. And voila! My scrollwheel is working properly with Firefox, finally! Hope this helps someone out there.

  • HT1267 My iPod player in my iPhone isn't working properly it will play for a few seconds then stop and also the volume level will appear then disappear what can I do to remedy this?

    My iPod player within my iPhone isn't working properly when playing videos it will start then stop after a few seconds and also the sound bar appears then disappears, and when playing music no sound is coming out when I'm on a call I can hear everything properly and also on loud speaker! What can I do to remedy this? Please help!!!

    If you haven't tried it yet, I'd eliminate memory issues first.  Close all of the apps with the double tap on the home button method
    http://support.apple.com/kb/HT5137
    then restart the device.
    http://support.apple.com/kb/HT1430
    My experience has been that this fixes a lot of issues.

  • Hi. I have a ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.Also my home button isn't working.

    Hi. I have an ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.For ex. when i hit 8 (which is the second number in my passcode) the number 5 type in. Also my home button isn't working. Hope that was specfic enough.. thanks!!

    Place the iOS device in recovery mode with one of thes programs and then restore via iTunes
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:

  • "Back to my Mac isn't working properly because your DNS server isn't responding. Contact your ISP for an alternate DNS server address, and enter it in Network Preferences".

    Hi, i am trying to setup back to my mac at home but I get the error "Back to my Mac isn't working properly because your DNS server isn't responding. Contact your ISP for an alternate DNS server address, and enter it in Network Preferences".
    There is no documentation on how to solve this anywhere.
    I have an Arris router set to bridged mode which is connected to a 5th generation airport extreme. I have tried using the google dns servers instead of the one assigned by the cable company in the AE but I still get the same error.
    Any help would be much appreciated
    Kenneth

    New to BTMM, I got stung today with the silly DNS problem message. Solution:
    1) Flush DNS cache with:
    dscacheutil -flushcache;sudo killall -HUP mDNSResponder
    2)System preferences > iCloud > untick BTMM then tick it again. The warning should have disappeared.
    Edit #1
    Apologies for the noise. The warning has come back
    Edit #2
    Just found out that BTMM is not compatible with double NAT. That's not helpful.
    http://support.apple.com/kb/TS1208

  • HDX-16T firewire not working properly with camcorder

    I hope someone can help me get this issue resolved. I've been trying to look for a solution for months! I was given the HDX-16T 1200CTO for christmas. An upgrade disc to Windows 7 64-bit came with it, so I installed it (up from Vista 64). When I tried to capture video from my Sony HDR-HC5 camcorder to my computer via my firewire cable, no data was transmitted. I tried several different video editing programs, including windows movie maker. None of them seems to work with the capture. According to the device manager, the firewire port is working properly. My camera can be controlled through the computer so they are obviously connected. I just can't seem to capture video from the tape. Capture works fine on my old windows xp desktop, so the camcorder is not the problem. I tested this with 2 different firewire cables with the same result, so the problem isn't the cable either. Like an idiot, I did not test the firewire port before the Windows 7 upgrade, so I'm not sure if the upgrade itself is the issue. A major reason I wanted a new computer was so that I could edit video. Because the firewire port isn't working properly, I'm having to capture from the old computer and transport it via external hard drive to my laptop, which frankly is a pain in the @$$. I would appreciate any help.
    P.S. I all my IEEE 1394 drivers are up to date. I have also tried everything suggested on this page.

    I just bought a new HP DV7-3188cl laptop with I5 processor, 6GB of mem and a built in firewire interface.  My primary purpose of buying this laptop was for video editing.  Sounds like I have the same problem as you.  My Sony HDR-HC5 HD camcorder connects to the laptop, and I am able to control the camera (stop, rewind, etc.) however whenever I try to capture video from the camera, there is no data sent, even though the camera begins to play the video with no problems.  I have an older dell running windows XP and I have no problems.  By the way, I have noticed that if I use Sony's capture software, that it will automatically stop the capture if more than 10 seconds of no data is detetected.  If after the capture program has stoped because of this "no data transfer problem", I restart the capture, with the option set to restart from the beginning of tape, the camera will rewind, and when the capture begins the 2nd time, about 80% of the time it will capture data correctly.  I have never been able to get Corel or any of the other pre installed programs to capture data through the firewire interface on this new HP laptop 
    Were you successful in finding a solution to your problem.  If I cannot solve this problem, I suspect the laptop goes back to Sams.
    Thanks
    John

  • Back to my mac isn't working properly

    After downloading Mavericks, (which went without a hitch), I am now receiving an error in system preferences stating: Back to my Mac isn't working properly
    because the DNS server isn't responding. Contact your internet service provider for a different DNS server address, enter it in Network preferences and try again.
    In reality everything wireless is working; the internet the printer iPad works fine.
    I went to the Airport utility and clicked on my Time Capsule and it states: Change Airport base station from using DHCP and NAT to Bridge mode.
    I done that and everything related to the wireless router runs real slow, I mean real slow. It took just under 4 minutes for my Time Capsule to recognize the computer. Due to this I received all kinds of errors from the printer from Airport Utility and the iPad.
    I need a fix please, I've read all the support documents related to this in the support community and either the answers given I have tried with no success or they do not relate to my situuation.
    Thank you for looking at this, I only hope you have a valid answer.
    Jerry

    New to BTMM, I got stung today with the silly DNS problem message. Solution:
    1) Flush DNS cache with:
    dscacheutil -flushcache;sudo killall -HUP mDNSResponder
    2)System preferences > iCloud > untick BTMM then tick it again. The warning should have disappeared.
    Edit #1
    Apologies for the noise. The warning has come back
    Edit #2
    Just found out that BTMM is not compatible with double NAT. That's not helpful.
    http://support.apple.com/kb/TS1208

  • My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?

    My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?

    If FaceTime ever worked properly for you, restarting your modem (and separate router/wireless if you have such) may help.  If the problem continues, try connecting at a different location to see if the problem is within your wi-fi.
    The black dot problem may mean you need to reset your iPod.  If that does not help, it may need service by an Apple Authorized Service Provider.
    If you need help with any of these suggestions, detailed help on each topic is available via Apple's Support pages:
      http://www.apple.com/support/ipodtouch/
    Message was edited by: EZ Jim
    Mac OSX 10.7.3

  • Convolution.vi isn't working properly

    I'm using LabView 7.0 and I'm trying to performing a convolution with the convolution.vi. This VI isn't working properly. As you can see in the attached file, the result isn't right even for very small input arrays. The result also depend on the input data format (singel or double etc.)
    May be someone had the same problem, or knows something about it. I'm using LabView 7 on an Windows NT system, may be that has something to do with it.
    Would be greatful about every hint,
    best regards Andy
    Attachments:
    example_convoultionvi.vi ‏18 KB

    Very strange...
    Can you open the diagram of the convolution.vi, then double-click on the "Call Library Function Node". What is the Path? (It should be C:\Program Files\National Instruments\LabVIEW 7.0\resource\lvanlys.*).
    Could ot be yours points somewhere else?
    Now find the lvanlys.dll in explorer. The size of the LabVIEW 7.0 version should be 528384 bytes.
    Do a search for lvanlys.dll. How many different versions show up?
    LabVIEW Champion . Do more with less code and in less time .

  • HT1937 My imessage isn`t working properly from my iphone. what could be the problem? how can I found out? the internet is working and in ipad i can send message.

    My imessage isn`t working properly from my iphone. what could be the problem? how can I found out? the internet is working and in ipad i can send message.

    I have no idea what the "freezer fix" is, nor why anyone would think temporary exposure to cold will somehow fix a hardware issue with a 100% solid state device.  Also, actually freezing your iPhone may very well itself cause damage.
    If you dropped it and wifi immediately failed to work, the odds are you inflicted physical damage to it - perhaps the antennae connection internally.  You could try a simple reset and see if that helps, but if not, you need to take it into Apple for an evaluation and diagnosis.
    If it has internal damage, since you dropped it, your warranty no longer applies.  Apple does not repair iOS devices, the merely swap them for factory refurbished units (and send your damaged one back to the manufacturer in China for refurbishment or recycling).  You would ahve to pay the out of warranty replacement fee (look on your country's Apple web site, under support for the iPhone for fees).

  • Remote not working properly with Apple TV...sporadic fuctioning

    Hello,
    I have no idea what caused this to happen, but both my remotes (I have one from my MacBook Pro and one from my AppleTV) seem to not work properly with AppleTV. It sometimes works but it is extremely frustrating as it only registers about 1 out of every 10-20 clicks then continues to remember the previous clicks therefore making it essentially impossible to select the desired menu/item. Basically it just seems like it's out of control!
    I tested whether it was the remote or AppleTV that was causing the problem by running Front Row on my MacBook Pro and both remotes seem to navigate Front Row perfectly fine. They both act the same way with AppleTV, whether they are paired or not. It seems as though something happened with my AppleTV. This problem occurred randomly, with no specific cause I can think of.
    Please let me know if any of you have ever experienced this problem and what your solution was, if any!
    I have tried restoring to factory conditions, resetting settings, ran diagnostics, unplugged and replugged it, and nothing seems to be working!
    Oh, and I just replaced the battery on one and have tried swapping batteries, etc.
    HELP PLEASE!
    Thank you,
    Travis

    The menus have never been as responsive as they used to since the 2.0 update in my opinion - basically AppleTV seems to cache/buffer remote click if it is busy or perhaps waiting for something to stream from itunes, and when resources become available it suddenly executes all command rapidly which makes it behave wildly in menus.
    Usually happens I find after restarting the unit or if streaming drives have gone in to power saving modes and there's a delay while they wake up to feed the AppleTV.

  • My ipad2 cannot find my HP A3050 j661b airprint printer although the printer is connected with the same wifi network.Software updates are current on all and my other labtops also work properly with this printer in the same network.Further more it used to

    My Ipad 2 cant find my HP3050A j661b airprint printer although the printer is connected to the same wireless network and software updates are current on all and my other laptops also work properly with this printer.further more it used to work with my IPAD2 before when I used the old wireless router but now I changed it to HAUWEI HG231f but I set everything in the same way it was. Thanks in advance.

    When you change to the new router, did you re-run the CD to re-set the new SSID and password to the printer.
    Otherwise your iPad will not be able "talk" to your printer.

  • HP computer will not work properly with an HP printer

    I have the following two items that I am trying to use together:
     - HP 23" TouchSmart Desktop, T6500 2.1GHz 4GB DDR3, 500GB HDD (Windows 7)
     - HP OfficeJet 6500 Multi-Function Printer/Scanner/Fax
    When I try to scan to Adobe Acrobat Professional 9.0, the document goes through the scanner, however the dialog box that I would expect (e.g. "Next Page" or "Done") never shows up.  At this point, the system is unresponsive with respect to Adobe or the printer.
    I suspect that it is waiting for the input from the dialog box that never showed up.  I tried to move the other windows to see if the dialog opened in the background, however I am not able to select any of them (they remain frozen).
    I contacted HP Support, only to have them tell me it must be the driver, and I have an "old" printer.  (I did not realize that a 9 month old printer was considered "old").  I have tried all of the possible drivers that are available (original disk, downloads, other downloads from HP tech support), none of these resolves the problem.
    In any case, they were unable to resolve the problem of having an HP computer work properly with an HP printer.  (The printing function seems to work, just very slowly).
    Has anyone else heard of this?  Is there a resolution?

    Update: I am still looking for a solution to this problem - the scanning portion of the Multi-function OfficeJet 6500 does not work properly with the HP TouchSmart computer.
    I have not been able to find anyone in HP that can tell me when (or if) new drivers will be released for this printer.
    I decided to investigate upgrading to a newer version of printer since HP told me the 9 month old printer I have was "obsolete", only to find that the identical printer is still on sale in many stores.  Hmmm....
    I feel like I am getting the run-around from HP.
    I have since tried several more driver/software combinations, but every time I have the same problem (as described in the previous post).
    If anyone has any ideas or suggestions, I would be most happy to hear them.
    Thank you.

  • TS3789 I have similar problem, my apple tv which has always worked properly with my Samsung tv will no longer play any audio after the latest 5.1 upgrade. Very frustrating as it was working perfectly before. I am starting to not trust apple upgrades until

    I have similar problem, my apple tv which has always worked properly with my Samsung tv will no longer play any audio after the latest 5.1 upgrade. Very frustrating as it was working perfectly before. I am starting to not trust apple upgrades until proven for example ios6 on iPhone with that stupid map app instead of google maps.
    I just want to buy and hear my iTunes music and videos on my apple tv, could before cant now. Thank you apple. Time to pack up the apple tv and start torrenting without the ios-bs.
    Disheartened apple fan.

    Welcome to the  discussion forums.
    Try going to synching in the sources menu on your tv and selecting 'change itunes library', when it gives you the passcode check itunes to see if the tv is showing up as a new device, if so try entering the pass code. It may be that your tv is seeing itunes as a different library because of a recent upgrade.

  • Help, web cam is not working properly with win vista

    Hii.. my web cam is not working properly with win vista..even if the icon appears bt it does nt start.. its
    lenovo easy capture 2.5...so if u cud suggest me anything...
    Moderator note; subject edited

    re-install drivers and try again. ( also easy capture )

Maybe you are looking for