Pendrive not detecting and not showing files/folders after injecting pendrive into PC !
sir, tell me where i can solve problem of detecting of FLASH DRIVE USB3.0 of model no:v210w that have been purchased from nagpur and currently not detecting and may have so many VIRUSES in that PENdrive. suggest service center to retieve data of PENDRIVE
johnboy922,
Which region did you call into The call center for North and South America is here in Stillwater, OK. While there are some varied accents around here from southern to northern, this OKIE has never had any trouble understanding them.
Daniel
Similar Messages
-
Plugged in, but not detected and not charging
recently i sent my laptop for repair, but after 1 month, the same problem occured. I plugged the charger in, but it is not detected. it even won't charge the battery. sometimes it happens, but sometimes it can be detected the charger. Usually it does not detect.. what should i do? what may be the problem?
Hi
Welcome To Lenovo Community
We are really sorry to hear about the issue you are facing,
You may want to try below different methods and check which one work for you.
Method A:
Remove the AC and Battery from the laptop
Press and hold the power button for 30 to 40 seconds
Replace the battery and AC
Boot the laptop up and check if the same message is still displaying
If same error still persist, try to uninstall Lenovo Energy Management, reboot then install the Energy Management software again.
Method B:
1.Open Lenovo Energy Management
2.Click on the bottom gear icon between i and ?.
3.Under Battery Health, Click on Start for Battery Gauge Reset. (refer to Fig. 1 below)
4.That should refresh the gauge and let the system finish through the cycle.
Method C:
1.Open Lenovo Energy Management
2.Click on the bottom gear icon between i and ?.
3.Under Battery Health, choose "Optimize For Battery Runtime" instead of "Optimize for Battery Lifespan".
Note: The latter option will extend the lifespan of battery by limiting the charging capacity to be between 0-80%.
http://forums.lenovo.com/t5/IdeaPad-Y-and-U-series-Laptops/Z570-Battery-plugged-in-but-not-charging-...
Do give this a try and let us know
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español -
Finder can not find and display certain files. Why? Any fix,please?
I've discovered to my surprise that Finder can not find and display certain files. Computer is Mac book OS X (10.6.8)
No matter what Finder settings I use, there are files which it can not detect and display.
Here are just some examples of files sitting in the HD but Finder can not display them:
Located in preference panes :
fibre channel 1.7
Located in : /Library/StartupItems/BRESINKx86Monitoring
BRESINKx86Monitoring
FxLicenseManager
Located in /Library/StartupItems/FxLicenseManager
EAP8021X
Located in /System/Library/PrivateFrameworks/EAP8021X.framework
The questions:
What to make of this inability of Finder to ,well, find? (again - I tried all possible settings of Finder!)
Is there any way to fix it?
Thanks for any competent suggestion!Well, guys,
Interesting suggestions but the problem remains -Finder (aka Spotlight) is not capable to find certain files.Period.
I consider it as a fault of the system because in comparison, a search facility of a plain Windows based machine is capable to dig out and display any file, no matter now deeply hidden...
As far as the suggestion above by softwater goes , well, I've used the additional foptions extensively and nothing produced the result needed -that's why I created this discussion.
If someone still believes that using Finder with all its options is good enough, here is a test for you to perform on your own Mac:
-Open /Library/StartupItems/ and have a look inside - most likely you have a bunch of items. Write down the names of one or two of them. For this test I've chosen
FxLicenseManager located in /Library/StartupItems/. You can use any file you want grom this location...
- Then go to Finder and set it to display everything in Library of the HD. Remember - for this test you pretend you don't know any file name in this folders.
If the Finder works properly it shall display folders of Library >Startup items with all stuff inside, including the FxLicenseManager file I used for this test.
Finder displayed nothing. It is obvious that for Finder, certain locations are off limits. That's why I consider Finder as a faulty.
Of course if someone can set the Finder's options to do the above search and succeed, I'll be glad to try ...:-)
At this point, what I gather from this discussion is that :
1. Finder (Spotlight) feature is not to be trusted,despite number of fancy but rather useless options.
2. If you need to really find everything usually not displayed by Finder you better get real searching software. -
i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos
Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
My external hard drive will not open and only shows up in Disk Utilities. When I try yo repair it, it give me and error of invalid sibling link. How do I fix my external hard drive?
Invalid sibling link may not be fixable by Disk Utility. (Disk Utility is very conservative, and will not attempt repairs that might cause you to lose data.)
It is an indication of serious Directory damage.
that leaves
a) third-party Utilities that will take those risks, or
b) re-initializing the drive (which deletes all your data) and restoring from another backup source.
c) "Copying off whatever files you can salvage" has gone by, and you cannot copy anything off a drive that will not mount. You may be able to use "rescue" programs such as prosoft engineering Data Rescue to copy files to another drive, but that sounds a lot better than its reality. You may get many files, but not get ANY filenames. -
# is not working in my iphone 4s, when i want to see how much credit i have in iphone, i need to put # on that, than it calls and end, it is not working and not showing anything..
http://support.apple.com/kb/HT1848 Did you transfer your purchased item, take a look at the link
-
my wifi is greyed out ..my bluetooth n hotspot is not working and its showing problem in resetting all setting plez help..
Hello Prakharfromindia,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
Have a nice day,
Mario -
Hi, I've just installed mavericks but my HPc4180 will not print and is showing a 'blank' page in previews can anyone help me?
A few suggestions for you:
Try:
uninstall all HP utilities or other HP apps on your Mac
see if there is updated software on the HP website
go to System Preferences > Printers & Scanners > Print
control-click on your printer in the column on the left
select "Reset Printing System..." and "reset" in the dialog that follows
Do a factory reset on your printer
go back to printers & scanners and it should see your printer and download a driver for it from Apple -
My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this?
a friend told me that he wants my os x cd for my macbook pro to upgrade his imac.
The discs that come with your Mac are "machine specfic" and cannot be used on another Mac. -
APs showing 'not associated' and 'not registered' in PI 2.1
I have got a weird issue in PI 2.1.0.0.87.
WiSM2, running on version 7.4.121.21, shows reachable and managed/synchronized in PI. However, the APs managed by it show 'controller IP->not associated' and 'not registered'. It is been confirmed that the SNMP/TELNET/HTTP creds are correct and all the APs in question are showing fully operational in WLC. When the user trying to delete the entry in PI, it always failed without any messages.
Any ideas why it happens?
Thanks!Remove the controller and add again, see if the APs are reflected then
Troubleshoot using:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/1-2/user/guide/prime_infra_ug/troubleshootaps.html -
my iphones buttons are not working and it shows a black screen whith apple logo on it what should i do now?
and i have to post sth importent on instagram tonight so its ergent please help....Greetings motahare,
After reviewing your post, I have located an article that can help with iOS device issues. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D -
After backing up my iPod my applications will not reload and just shows waiting underneath the application, any help?
http://lifehacker.com/5948155/fix-iphone-apps-stuck-waiting-during-installation
http://alvinalexander.com/apple/iphone-waiting-apps-update-install-reinstall-del ete-ipod -
I downloaded the Acrobat 11 trial and I can open the product. During the install it deleted the existing print driver and did not install a new print driver so I CAN Not create and print pdf files.
What OS? Have you tried a repair and updates from the HELP menu? The updates may be the key.
-
Excise invoice is not saving and not showing datas
in erxcise invoice i ve made settings as per the sap best practices then also the excise invoice is not saved and not generated also
please help me to solve the problem
the error is coming like this
Error in allocating Excise invoice number Interval not found Number object J_1IEXCLOC
Message no. 8I336
i ve already maintainthe number range for this object in tool in tax in goods moment
please give some better advice for the excise invoice setting.Sub Transaction type determines the subcontracting attributes and determines the accounts for the posting while doing a sub contracting transaction.
Sub transaction type is also used for determining the accounts while
doing excise removals.
Within CIN the account determination is based on the transaction type.
So normally you can have a single set of accounts for Excise
utilization. In case you need alternate account determination for
handling various scenarios you can define sub transaction types. The
sub transaction types and corresponding account assignments needs to be
maintained in CIN customization
To make customization of Sub Transaction type, goto
<b>SPRO --> Logistics General --> Tax on Goods Movements --> India --> Account Determination and check whether you have assigned second and third one, viz. "Specify Excise Accounts per Excise Transaction and Specify GL Accounts per Excise Transaction".</b>
Check
<b>Taxes on goods mvnt--indiaaccnt determination---specify excise accnts for excise transaction...maintain the sub transction type , ip or 01,
against the appropriate ETT</b>
Message was edited by:
sam masker -
In that process I lost my LR4 catalogs I was able to redownload the program but the catalogs are not there and not all of those pictures are on my external hard drive because same said teen decided they were going to borrow my external hard drive without telling me and "made room" on it. Is there a way to recover my catalogs? Please tell me there is because I was in the middle of working on a session when I had to wipe my drive and I would REALLY like to not have to go back and reshoot it. Any help would be wonderful!
It depends on how you wiped your drive. Depending on how you did it, only the directory was erased and the data can be found with drive recovery software. Some are free, although there is a small charge for most of them (~$30). You can usually download a trial version that shows if it will work and you have to pay to be able to save the found files. Use Google to search for the software. Different programs work differently and can find different things.
Good luck.
John
Maybe you are looking for
-
IPod Nano Won't Update Or Restore To 1.1.3
I tried to update an iPod nano to 1.1.3 using iTunes 7.2 and the update froze after being prompted for an admin user id and password. After 10 minutes I killed iTunes and then tried to update the nano again after iTunes discovered it was in recovery
-
I've got a fast computer w/plenty of ram. I can watch videos from all other sources perfectly smooth, including Quicktime HD movie trailers. When I try to watch a video in iTunes it slows my computer down so much that besides the videos stopping and
-
How to mantain entire freight charges in header condition or header level.
Dear - all when am creating a purchase order i have 2line items with different materials. but i want to give freight charges as header level for which value will be distributed to each and every line item, so for that what will i do - which is my ite
-
Hi all, I tried to set up a scenario using the value mapping functionality. Unfortunately the data is not changed at all on its way through the mapping program. Does anyone have an example of how to use value mapping in the right way? Message was edi
-
Fixed substitution into PCA (ledger 8A)
Hi, I want to achieve a fixed substitution into the fixed ledger PCA, *A. When posting from an FI journal I want the transaction type field to filled filled with a constant value liek 'XXX'. I tired using the fixed field movement (GCI4) but did not s