Pentax K3 Raw pictures are not recognized by Aperture 3.5. Importing these photos leads to error message. Any tips?
I recently bought the Pentax K3 SLR. Before I used the K5 with Aperture without any problem. Now when i try to import raw images the message is "image not recognized". It makes no difference if I use the DNG Raw or Raw+ or the PEF pentax raw format. Jpegs are no problem but I want to use raw data. Does anybody have any hints?
Each raw support is camera specific - different sensors, different lens.
Apple has been pretty quick with raw support lately, a new raw support release every few month, but it is very hard to predict. Some cameras have never been supported. I am still waiting for the support for my camera after three years.
You could use the camera specific software to convert your raw files to a supported format, while you are waiting, or shoot raw+jpeg, and use the jpeg as originals. That can be reversed, when the raw support is available.
Similar Messages
-
i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?
My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
And edit your mouse settings to do what you want it to do.
Secondly, this is not the place to vent. If you have a complaint, there is:
http://www.apple.com/feedback/
or http://www.apple.com/contact/
We are just end users here helping other end users.
Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
Good luck! -
My personal emails are not downlaoding to my Iphone 5. My last update was January 8th. I keep getting a message requesting my "yahoo" password. I insert it and continue to get the same request.
Contact Yahoo.
-
has anyone else had the same issue?
Did you uninstall the Firefox 4.0 beta version ?
If you did then did you remove the personal data or otherwise removed to Firefox profile folder ?
Make sure that you still have a (default) Firefox profile folder.<br />
See http://kb.mozillazine.org/Recovering_a_missing_profile -
I have lightroom 4 I've had it for years and it has imported my raw files from my CF card without issue . Now when I plug in my CF card to import new files it says import operations not performed and there are no image previews . When I continue by hitting "import" I get a pop up window that states "the files are not recognized by raw format support in Light Room"
Don't feel too bad. If the D4S has as many menus and custom functions as my Canon 5D Mark iii its easy to get messed up.
If you downloaded from the link I gave you it will be Lr 5.4. The link was just to show you when the D4S was supported. The newest version is 5.7.1 and can be downloaded here. Don't know your OS so you will have to pick Windows or Mac. Product updates
On my Mac I just run the downloaded installer program (its a full version and not an small update) and it installs the new version and erases the old version. If you are on Windows you will have to get help from a windows person. -
How do I import images. Have a message that says: The files are not recognized by the raw format suppot in Lightroom. Am using a Mac version 10.9.4. the import is from a new Nikon D610. Am using LR 4.4 Please help Adobe is useless as a support.
Each camera must be supported explicity and your LR version is years older than your camera.
According to Adobe's Camera-support page, you need at least LR 5.3 to work with your D610 NEFs in LR:
Camera Raw plug-in | Supported cameras
If you don't want to upgrade to LR 5, or can't due to your OS being too old, then it might work to use the latest DNG Converter and create DNGs from your NEFs, which should open in LR 4.x. You can find the DNG Converter here: http://www.adobe.com/downloads/updates -
Tried loading my raw files shot w my new Sony a7 and its sd card into lightroom4. Got a message: "The files are not recognized by the raw format in lightroom"
Does Lightroom 4 not work with the Sony A7?
Thanks,Lightroom 4 cannot read the RAW photos from a Sony A7
You would have to download and install the FREE Adobe DNG Converter version 8.5 and then convert your RAW to DNG, and then import the DNGs into Lightroom 4
You could also purchase Lightroom 5.5, which will have the capability to read the RAWs directly. -
Hyperlinks created in some pages work normally, in another pages of the same site, they are not recognized by Firefox. Re-publishing of the pages has no effect. Please, see http://www.kramaric.eu/psychoterapia.html (hyperlinked pictures).
The following line tells me that this is not a template file, but a document created from a template called index.dwt
<html xmlns="http://www.w3.org/1999/xhtml"><!-- InstanceBegin template="/Templates/index.dwt" codeOutsideHTMLIsLocked="false" -->
This means that you saved a child document as a template file at some stage.
If you go to Modify->Templates->Detach from Template, you can remove the template structure from your document. All you then need to do is to re-save the document as a template. -
Has anyone tried to load raw files from a Canon 7D Mark II I get an error "Files are not recognized by the raw format support in Light (149)"?
Based on previous experience, I expect the final versions of LR, ACR and DNGC to be released simultaneously. We have so far seen Release Candidates of ACR and DNGC but not LR.
Unless there needs to be a second ACR/DNGC Release Candidate which happens once every few years for special circumstances, which I don't see any of at the moment. -
I've got LR5.7 and Camera Raw 8.7 and my Fuji X-Pro 1 files are not recognized. How to make good ? Thank you
Do you get an error message? What - exactly - does it say?
-
.jpg files created on Iphone 4S are not recognized as .jpg files when uplaoding to American Heart Association fund raising webpage? .jpg's from Canon camera uploaded without any problems? The website automatically reduces the file size to <100kb.
I haven't contacted AHA about this issue. The .jpg files created on Canon SLR uploaded correctly, but the photo from iPhone which was emailed to my PC using MS IE. The .jpg was browsed to from my desktop and is submitted. It shows up in draft form then when uploading it fails saying it is not a .jpg file or .png file? I have had other issues in the past emailing iPhone pictures. They were not editable after being sent to a PC. I guess we can retake photos with a non-Apple camera.
-
Adobe products are not recognized in my Internet Explorer 10 on my Win 7 64B professional
Adobe products are not recognized with my Internet Explorer. I cannot open PDF documents on websites and I cannot play MSN games since Flash Player is not found. I have tried manage add-ons and enable status without success. Can anyone supply detailed information on how to fix this problem?
C-adobeAre you running IE10 in 64-bit mode? The Adobe Reader plugin is 32-bit, and can only run on a 32-bit browser.
Regarding Flash Player, do you have ActiveX Filtering enabled? Disable it. -
I just purchased Export PDF, and when I use it, it opens them in WordPad (which I never use) instead of Word. Thus, the pictures are not there, and the fonts are changed. How do I get them imported into Word?
Hi,
I checked your account,your Export PDF subscription is in 'Pending' status.
Once it gets confirmed you will be able to use it.
Please let us know if you require further assistance.
Regards,
Florence -
Can someone tell me how to find my photos?I backed up my iPhone but Photostream was not on.pictures are not on my laptop so where did they go?
Welcome to the Apple Community.
Backing up does not transfer your photos to your computer, if you don't want to enable photo stream, you will need to transfer your photos when your device is connected to your computer using iTunes. -
my pictures are not showing up on my iphone 4s and i do not have icloud set up is there any way ro fix this?
Pictures from where?
Maybe you are looking for
-
How to Get the Source File Path in the Receiver Side
Hi Experts, Here We are Trying to Do How to Get the Sender Information ( File Name & Path ) on the Receiver Side . According to the Michal Blog /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp
-
Linksys SGE2010P resets after power off
Hello, i got a linksys SGE2010P and when i configure it and save it works fine but after a power off the settings are back to default. someone an idea ? Rensk, Solved! Go to Solution.
-
Control panel does not show the home page when Newsstand app is open - could this be a bug?
When Newsstand is open and I press the home button twice to access the control panel, the home screen is replaced by the Newsstand app. Is anyone else having this issue? Is there a fix?
-
Opening 16bit files from audio vault
I am trying to use multi-track editing with sound files in audio vault that are 44100 and 16 bit. Files open with like white noise. Am I missing a setting? PAK
-
New iPhone 5 on Verizon will not send or receive texts. In the beginning iMessage worked for about a day and then messages started to be delayed by hours. Eventually even these messages were not being sent. Reset network settings followed by a soft r