People help..

how to create 1 pdf file from multiple files?

File > Create PDF - browse to and select multiple files as needed
if there are open files, "From Open Files" may be available.
Requires Acrobat Standard or Professional, Adobe Reader would not have the ability

Similar Messages

My imessage isn't working when i send messages to people with iphones that have imessage it works with very few people, now it's starting to stop working with those people. help please.

my imessage doesn't work between my friends and i. i have a new iphone 5. my messages only work with some people. with others imessage doesn't work in the first place and now its starting to stop working with other people help please.
& yes we all have imessage on.

Hi there,
I see that you are having IMessage problems. Some of the problems might be:
- Your friends IMessage is not activated (you have to activiate it with your apple id)
- Your IMessage is not activated
Here is some links to another person`s Imessage problems:
https://discussions.apple.com/message/17301880#17301880
https://discussions.apple.com/message/20142285#20142285
https://discussions.apple.com/message/18988318#18988318
Hope that helps!

My friend has a non jailbroken iPhone 4 and has Siri fully working on it (iOS7) he won't tell me how he did it so pleeez people help me

My friend has a non jailbroken iPhone 4 and has Siri fully working on it (iOS7) he won't tell me how he did it so pleeez people help me

That is absolutely impossible. Siri requires an iPhone 4S or later.
if your friend really does have Siri working on an earlier iPhone, it was in fact jailbroken, and you will get no help from this forum at all.

Nice People HELP ME!!! IPv6 over PPPoE Configuration on Cisco 7206VXR

I have a 7206VXR which connects to a DSLAM via the router's ATM/DS3 interface. A CPE home router connects to the DSLAM. So it's like:
PC -----ethernet---- CPE Router ------ dsl line ------ DSLAM ----- atm/pppoe ------- BVI/Virtual-Template/PPPoE on Cisco 7206VXR
Now the problem is:
- PC CAN ping the BVI interface of Cisco, but NOT beyond that. For instance he can't ping 7206's loopback ipv6 address.
- I found something interesting on the CPE, that CPE itself can't ping BVI interface of Cisco, AND it doesn't have a default gateway ::/0 set on itself. I manually added a default router like "route -A inet6 add ::/0 gw <BVI's IPv6 addr>", and the problem got solved and PC can ping Cisco's loop back IP now. But this is not a solution since I want this thing to be automatically ready.
Note both CPE and PC are happy with global IPv6 addressed assigned.
I believe this problem is related to how PPPoE/IPCPv6 handles addresses and prefixes.
Ok, now some configuration details: I use 2001:7:7::/64 for the "WAN" side of CPE, and 2001:8:8::/64 for its LAN side (PCs). And here's the Cisco config (only related stuff is shown here):
ipv6 unicast-routing
ipv6 cef
ipv6 dhcp pool foo
prefix-delegation pool test
address prefix 2001:7:7::/64
bridge irb
bba-group pppoe global
virtual-template 2
sessions max limit 256
interface Loopback0
no ip address
ipv6 address 2001:9:9::1/64
ipv6 enable
interface Virtual-Template2
description Public PPP CHAP
mtu 1492
ip unnumbered BVI1
ip pim sparse-dense-mode
ip igmp version 3
ipv6 unnumbered BVI1
ipv6 enable
ipv6 mtu 1492
ipv6 nd managed-config-flag
ipv6 nd other-config-flag
ipv6 nd router-preference High
no ipv6 nd ra suppress
ipv6 dhcp server foo
peer default ip address dhcp-pool Public
peer default ipv6 pool test
ppp authentication chap
ppp pap refuse
interface BVI1
description Public IP ADSL
ip address 12.230.197.129 255.255.255.224
ip pim sparse-dense-mode
ip igmp version 3
ipv6 address 2001:7:7::1/64
ipv6 enable
ipv6 mtu 1492
ipv6 nd managed-config-flag
ipv6 nd other-config-flag
ipv6 nd router-preference High
no ipv6 nd ra suppress
ipv6 nd ra lifetime 60
ipv6 nd ra interval 40
ipv6 local pool test 2001:8:8::/56 64
NICE PEOPLE PLS HELP ME! ^_^

Thanks Andrew for your response and sorry for the confusion: actually I didn't include all my config lines. For bridging, actually I did what you mentioned and everything works fine with IPv4:
interface ATM1/0.3 multipoint
description Public DHCP
bridge-group 1
pvc 1/1060
encapsulation aal5snap
bridge 1 protocol ieee
bridge 1 route ip
bridge 2 protocol ieee
bridge 2 route ip

How to Edit with Multiple People - HELP

We used to be a small, 1-guy editing operation. But now we are huge (joke) and have 3 guys doing editing on an ongoing kids program.
I need some help with how to effectively edit the same program with 3 different people editing.
I assume that it's impossible for all 3 editors to edit the same project file simultaneously, right? That would be ideal as long as each person is working on a different scene, but even then, I'm sure it would introduce all kinds of problems.
So I'm left pondering the best way to edit one large program (1-hour in final length) between multiple people. The best method I've come up with to this point is to split my project up into 5 individual PP projects broken down by general scene categories.
That way each person can work on the "same" project/episode, but yet be working off of separate files, thus avoiding syncing problems.
But this only seems like a bandaide to our situation, especially if we bring on a couple more editors in the future.
Any suggestions on working on the same project/episode at the same time between multiple people?

There was a recent thread on similar issues. I don't have this situation (one man shop), but one aspect of the "import sequences" to a master gets my attention. I was starting to do this for my own projects (e.g. a season's worth of ball games where you want to do individual gamnes as well as a highlight of the season). One project for it all gets rather complicated, and it seemed simple to import key sequences into another project. But...
A) This is not a dynamic link, but an import. The whole project (or whole sequence(s) your choice) come in, inside a new bin. changes in the other sequence are not updated in the master, so you need to be finished in the imported sequence - or be prepared to import again and redo any transition work.
B) When you import, even though all the clips are from a shared pool, Premiere creates new instances in the imported bin. Even if you offline and relink (so you don't literally need multiple clips on disk), they are still multiple instances in the bins. As long as you don't plan on using work on clips in other sequences/projects, it really won't matter. But, for example, if editor A adds markers to Clip 1 in their project, and you import their project to the master project, Clip 1 in editor B's project imported to the master will not hve the marker set by editor A,
All logical really, but it limits this as a workaround to making Premiere work as a shared editor.

PEOPLE HELP!! THIS IS URGENT!!:(

Hey I own nokia 5500Sport(black edition) and few days ago, my keyboard from phone unsticked from my phone.I used it only for month and half. Bat thats not my main problem. I live in country(Bosnia and Herzegovina) where there is no Nokia Center. I bought phone in Mobile Shop and the owner told me that I'm guilty for damage on the phone because I didn't used it properly. Thats why I beg admin and Nokia Menagers if they can send me some kind of verification on my e-mail adress, that this is a industrial error , and that the phone is not maded properly by the Nokia so I can prove my words ,because the owner wont repair it.I payed that phone 300 €.I worked hard to get that money,so pleas help me. Thanks

Their are a few postings on the subject of the quality and stability of the keypad for this handset.
Check the small print in the warranty for your country to see where you stand.
This should not happen within a month as long as the handset has been used fairly.
If you feel that you have not abused the handset then either return to the shop you purchased it from and esculate the issue to the shop manager, or their head office to gain satisfaction.
Also see if their are any other outlets that have a Nokia auth engineer to perform the repair and ask for a costing to see if the original shop will cover the cost. If you have this repaired by an un auth engineer then the warranty will become void.
Nokia can be contacted from this site so maybe another e mail to them to ask any other avenues you can take wont hurt.
Good luck
Nokia Lumia 520
 iphone 6 Plus.
Be happy !!

Please People Help Me With All Your Heart

itunes want get my ipod like the source plane doesnt pop up can someone help me please i'm trying to put my new songs on my ipod please i will really appriated please

try downloading that at apple web site
i usually use that to detect my ipod if it cannot be detected
by itunes then restore it
ipod getting undetected was sometime cause by corrupted software
if ipod updater failed to detect your ipod try bringing it to an apple service center

Please people help me with this project ( the bag of fruits)

hey everyone, i have a assignment that due next Monday and i have some troubles solving it its about a bag of fruits where we can put items grab items get items and so on. this site where the applet for this application is exist http://courses.cs.vt.edu/~csonline/SE/Lessons/OOP/index.html this is my code
public class Bag{
String fruits[];
int bagSize;
public Bag () //constructor
String[] newFruits = new String[8];
bagSize=0;
private boolean isEmpty () {
if (bagSize == 0) {
return
true;
return false;
private boolean isFull(){
if ( bagSize== fruits.length-1){
return true;
return false;
private int totalItems () {
return bagSize;
private boolean emptyBag (){
return bagSize ==0 ;
private boolean hasItem ( Object item ) {
for ( int i =0 ; i<= bagSize-1 ; i++)
if ( i == 0)
return false;
return true;
     public boolean putItem(String pItem){
     if(isFull() == true)
     return
     false;
     else
     fruits[bagSize] = pItem;
     return true;
i will appreciate any help from you, thanks

madridimoot wrote:
my problem is that i have some missing methods like grabItem , putItem, getItem. and when i run the program it told me out of boundYes I can see from your code that you're having trouble with array indexes; if bagSize == 0 your bag is empty and where your bagSize == 8 (the size of the array) your bag is full. You have to add another fruit item at index position bagSize (and increment it afterwards). Deleting an element is a bit more trouble when you want to use an array. Also your method emptyBag() is redundant because it's functionally equivalent to the isEmpty() method. An array is quite a clumsy data structure for a bag of things. A List would've been better.
kind regards,
Jos

STICKAM PEOPLE, HELP?

i can't get my camera to work on Stickam.com.
it works on iChat and photo booth,
but i can't get it to work on stickam.
help?
aim- EmileeElectronic
myspace- myspace.com/emiilee

try the suggestions from http://discussions.apple.com/thread.jspa?messageID=4761707&#4761707
First test your iSight with Apple applications like iMovie or iChat to be certain it is working. ( You have already done this! ) Once you know iSight is working, try the following.
Navigate to the Stickam website. If you do not immediately see an "Adobe Flash Player Settings" dialog box, put your mouse pointer over the video window that is playing and control-click. This should open the dialog box.
Adjust the "Settings" in the Flash dialog box as follows:
• Click on the webcam icon.
• If you are using a built-in iSight, select the "USB Video Class Video" Camera setting.
(External iSight users will need to set the webcam camera setting to "IIDC Firewire Video".)
• You can then click on the microphone icon to set your "Microphone," "Record Volume," and "Reduce Echo" settings.
• You should also click the privacy icon and verify that the "Allow" button is selected. If "Deny" is selected, you will not be able to send or recored video or audio.
• Close the dialog box and see if Stickam works for you now.
If the above does not solve your problem, you will need help from Stickam.
Web sites like Stickam.com (and the many other live video sites) have unique requirements. The FAQs or Help links at their sites should give you the best answers for your compatibility, configuration, and operating questions concerning their particular operations.
Click Stickcam's Help link in the upper right corner of their home page to get the answers to your questions.
If Stickcam's "How-To" or " F A Q " pages don't give you the answers to your questions about using Stickcam, they offers a "Support" link for help on Stickam-specific questions.
EZ Jim
G5 DP 1.8 w/Mac OSX10.5.6 PowerBook 1.67 GHz w/Mac OSX10.4.11 iBookSE 366MHz OSX10.3.9 External iSight

Good people help please

trying to change my pic and main email in Skype account.each time I am asked to re enter my facebook password o approve the changes.But each time I get a messege that my PW is incorrect. I have changed my FB password and tryed again with no sucsess . Please Help Me! Tom

I also had the same issue. One time my touch screen was replaced. For couple of months it was fine and then again started the problem of touch screen issues. It automatically pressing buttons and some times doesnt work at all. And those are totally random.Any body from Sony, why dont you introduce a softare upgrade to use all functions using keyboard. At least this would have been made us to use the phone. But as of now most of the functions required touch screen and you do not have key sequences, thus my phone is becoming useless.

Can some experienced people help me understand thi...

ive ive had very poor sppeds the last week or 2 and today an engerneer came and said that bt had capped my speed, so ive just ran a spped test now hes sorted that out and heres what i said:
Download speedachieved during the test was - 338 Kbps
For your connection, the acceptable range of speedsis 100-500 Kbps.
Additional Information:
Your DSL Connection Rate :3844 Kbps(DOWN-STREAM), 584 Kbps(UP-STREAM)
IP Profile for your line is - 500 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 14.14:26.72:59.14 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
im getting confused betwen it saying im getting 3844kbs downstream but then its saying that the speed achived in this test was 338kbs? so which DL speed am i getting and more importiantly why lol, thanks guys

Thanks very much for your help so far, looking at this how long would you estimate it will take for my profile speed to catch up for my download speed?
Download speedachieved during the test was - 338 Kbps
For your connection, the acceptable range of speedsis 100-500 Kbps.
Additional Information:
Your DSL Connection Rate :3844 Kbps(DOWN-STREAM), 584 Kbps(UP-STREAM)
IP Profile for your line is - 500 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 14.14:26.72:59.14 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
thanks again

People, HELP again :D

HEJ all from cold Sweden,
I wonder if there is any one here that can help me.
Accedently I pressed on the voiceover bottom and then I opened the help windows and pressed it off again but still
when I start the laptop this man start talking, just explaining every thing like I was blind. Can u guys please help me
with this. just tell me how can i permanently turn it off.
Thanks .

Press Command-F5. (On some computers, you may need to press Command-Fn-F5.) If sound is turned on, you hear the computer say “VoiceOver Off” to confirm your action.

Would you mind help from some of the Via people here?

Do you mind if some of the Via K8 people help you guys out with tech support?

Quote
Originally posted by SAB
orion24...How do you like the performance of that Zalman PSU?!!!
Also, thanks for sharing that important info on RAM!!!
P.S. That's why Tiresmoke started this thread!!
Well it sure is more quiet than any other PSU I've ever had. It has large passive coolers inside and it is clear that it's designed not to be noisy. It's fan speed is automatically controlled by the PSUs temperature. Actually it is quiet, but right now it's the most noisy part of my PC. Probably because it's summer . . .
Performance-wise I've never had a problem with it, but I'd be interested to find out if it can afford a GeForce 6800 Ultra with my CPU overclocked. You can find a review for this PSU at Tom : http://www6.tomshardware.com/howto/20030609/index.html
Zalman has released an enhanced version of this PSU, however, (I think 400B-APF) that might suberb this one in every sector

Help on how to fix macbook pro 13inch 2010 (cpu 1 caller 0x47f5ad)?

help on how to fix macbook pro 13inch 2010
Hi, I need some peoples help on fixing my laptop. I have a macbook pro 13 inch 2010 model, and it refuses to boot into either osx or windows. Every time I prevoiusly treid to boot into mac osx I got this error "panic (cpu 1 caller 0x47f5ad)". there is an image below. and when I had treid to boot into windows (bootcamp) I got this error "A disk read error occured Press Ctrl+Alt+Del to restart". I have treid to restart the computer and gotten both these errors agian. The strange things is this deosn't always happen, sometimes I don't get any errors, and it just has the apple logo whith the spinning loading thing happening below (I left this for an hour and it still kept spinning, and never loaded). Other times it just show white whith no errors but never loads, sometime it lets me alt to select which os to boot into (nether work), but other times it just freezes and shows a mouse cursor on the white background. it's not consistent.
Most recently it has a flashing folder on a white background. I treid inserting my osx disc and went into disc utility but it doesn't detect my hardrive. It may be a faulty hardrive or sata cable but I dont know (I have links below). I was recently (well for the first time), defragmenting my windows partition, it hit temparatures of 80-85C, and stayed at that for several hours throughout the defragmentation, would this have damaged it?
I have scoured the internet and found many people whith very similar problems to me but none whith the same, and A lot of people saying that if you get the error you should just use a time machine backup, the thing is I don't have a time machine backup. The internal hardrive I am currently using on my laptop is a seagate 640gb 5400rpm (it's not an apple harddrive). every thing else it standard, standard ram and no overclocking, I was running 10.6.8 snow leopard, and windows xp profesional 32bit (split 320gb each, whith about 10gb spare on each parttion).
It would be greatly appreiciated If any one could shed some light on what I should do. I need the laptop working whithin the week (for my tafe work), but If I have to reinstall the OS's and programs it could take a long0I have a lot of programs and that could take a month. not to mention The fact that the hardrive might be completly fine and it's just a faulty sata connection. but then would I still be getting an error if thats all thats wrong?. and if it is just the error is there anyway I can fix it whitout doing a fresh install, there a error reading document blow but I cannot make heads or tails of it. I also have almost no money to afford getting it fixed.
also one last thing, I stupitidely inserted my mac osx disc 95% of the way into my macs slot loading drive when it was powered down (off). when I turned it on it sucked it in fine, but would that have caused any damage to the disc or laptop (I cannot eject the disc to check)
I have images of many of the things I described below. So any suggestions.
I have also posted this on several other websiets if that helps)
Photos
http://www.flickr.com/photos/100089102@N08/
"panic (cpu 1 caller 0x47f5ad)" error issues
http://forums.macrumors.com/showthread.php?t=1177233
http://reviews.cnet.com/8301-13727_7-10344626-263.html?tag=mfiredir
https://discussions.apple.com/thread/3256029?start=0&tstart=0
http://www.mac-forums.com/forums/switcher-hangout/258078-macbook-pro-will-not-st art-up.html
https://discussions.apple.com/thread/3965618?start=0&tstart=0
Hardrive issues
https://discussions.apple.com/thread/4225754?start=0&tstart=0
http://www.mac-forums.com/forums/other-hardware-peripherals/242064-hard-drive-no t-showing-up-disc-utility.html
How to read errors
http://developer.apple.com/library/mac/#technotes/tn2063/_index.html
other websites
http://au.answers.yahoo.com/question/index?qid=20130808212838AAYDeTk
http://forums.macrumors.com/showthread.php?p=17706929#post17706929

The problem may be that your macbook is'nt set to 'mirror image' if you go into settings, onto 'displays' there should be an option within, once youre connected, to 'mirror image' if you check this box, then the problem should be sorted, if not then maybe a dodgy cable or adapter.

Help needed in decode function

I am trying to use decode function shown below
select decode(deptid,(select deistinct dept_id from dept),'found') into id from student ;
it shows error ORA 01427:single-row subquery returns more than one row.
could you people help me resovle the issue.
Thanks.

Funny thing how many mistakes can be in one little line. I try to list what is wrong here. maybe it helps you to understand what is going on.
select decode(deptid,(select deistinct dept_id from dept),'found') into id from student ;1) "deistinct" => wrong spelling "distinct"
2) Uniqueness => the typical DEPT table has DEPT_ID as a primary key. So DISTINCT would do nothing here. "select distinct dept_id from dept" is the same as "select dept_id from dept".
3) decode with a multi-row subquery => the decode function only accepts single values. e.g: ,"decode(deptid,(select max(dept_id) from dept),..." => THis is not really useful, just an example.
4) decode without handling other values => it is better to say what should happen, when the values does not match. decode(deptid,:x,'found','notfound')
5) select .. into ... from. => INTO is only used in a PL/SQL . So I assume this statement is part of a larger PL/SQL block. In that case "into id " is a problem. The select would return many values, but your ID variable could probably hold only one value.
6) Identification of values => For all students that could be returned, you only would know 'found'. At least select the ID for the student too, else you wouldn't know which student was found. select id, 'found' ... from student.
7) Don't select everthing and check for each row later. Select only relevent rows. That means do your checks in the WHERE clause of a select statement not in the SELECT clause. Example: "select id from student where dept_id in (select dept_id from dept);" Possible in this case is also a join "select student.id from student, dept where student.dept_id=dept.dept_id"
8) referential integrity. Why do have to do this check anyway? On table student there should be a FK constraint, so that only values can be inserted where the DEPT_ID is correct. Then you select would be "select id from student;".

People help..

Similar Messages

Maybe you are looking for