People Recognition working inconsistently in PSE 12 Organizer using Win 8.

People Recognition working inconsistently in PSE 12 Organizer using Win 8. Problem same as indicated in other earlier or same version of PSE using earlier versions of Windows posts. Does any one have a solution ? - cannot find Mr and Mrs Breeze!!

People Recognition working inconsistently in PSE 12 Organizer using Win 8. Problem same as indicated in other earlier or same version of PSE using earlier versions of Windows posts. Does any one have a solution ? - cannot find Mr and Mrs Breeze!!

Similar Messages

  • People recognition error in PSE 9 Organizer

    I am new to PSE and PRE. I purchased version 9, installed and began importing my photos and videos. My library has 8566 entries. At first people recognition worked fine finding photos with faces and suggesting names as I entered them. Then it read "No unlabeled people found in your selection." I thought this was great because I had everyone tagged. I noticed as I looked through my photos that not everyone is tagged. Now I get boxes asking "Who is this?" and when I click the box I no longer get a suggestion. Also if I try to run people recognition it says "No unlabled people found in your selection." I get this message even after importing new photos that were just taken. PSE Organizer recognizes the face but still says no unlabled people. How can this be? Please help.

    function(){return A.apply(null,[this].concat($A(arguments)))}
    Flagelpater wrote:
    I am also fighting the same problems.  Tried the suggestion by RDNelson #13 with No Success. Not impressed with ADOBE's response so far.  I have not tried the new catalog procedure yet because I do not want to get 90% finished and have it fail again.  Thank you to all that have responded and I wonder how many others are reading but not joining in?
    Can you tell me what is happening after you tried my suggestions.  Are you still getting "No unlabled people found in your selection" when pressing the Start people recognition button?
    I may have duplicated this issue.  I will ask that you investigate something else.  First, some background information...
    Running face recognition makes an entry in the catalog.  In addition it creates a file for every photo which face recognition is run on.  This file is placed in the BreezeData directory under the catalog directory.  I was able to duplicate the issue where the propmt "No unlabled people found in your selection" by write protecting the BreezeData directory.
    Possibly, there are issues with this directory on your system.  I just helped someone else who had directory permissions on the .dat files which caused other issues.  Possibly there are permission problems in this directory?  Or, could this directory contain too many files (NTFS volumes should allow for a very large amount of files)?
    This is what I would like you to check...
    1) Check to make sure the security settings are set to "Full Control" on the BreezeData directory.
    a) Right click on the BreezeData directory from the Windows Explorer
    b) Click on the Security tab
    c) Click on the Advanced button
    d) Click on the Effective Permissions tab
    e) Click on "Select..."
    f) Type in the user name which is currently logged in or the user name you wish to check permissions on in the box "Enter the object name to select (examples):
    g) Press the "Ok" button.
    f) Review the checkboxes in the "Effective permissions" list to ensure there is a checkbox next to all items in the list.
    If you don't have sufficent permissions, then add full control to the desired users.  You may want to verify that the catalog and all content under the catalog is set to Full Control.  Make sure to exit the Organizer and restart before you try face recognition again.
    2) If 1) does not indicate any problems, see if you can actually navigate to the BreezeData directory.
    a) How many files are in this directory?
    b) Can you open up any file?
    c) Can you create a temporary file such as a word document or even a text file with Notepad?
    Note that the same thing happens for media-analysis except for a file is created in the CAXMPFiles directory for every photo analyzed.
    I hope this helps.  I'm not sure I can help you beyond this and it would be best to contact Adobe directly to report this.

  • People Recognition

    I am having a problem with people recognition on Elements 10, and I'm using windows 7 64 bit. This has just started in the last week, where I try to add tags to people and the people tagging starts and stops without finding anyone. For a while I could shut down the computer and restart it and it would start working again, but that doesn't work anymore. 

    Check your settings by clicking the top menu
      Edità Preferencesà Media Analysis

  • PSE 8 Organizer file format

    How is it possible to change the file format that PSE 8 Organizer uses to save files? E.g. if I use the function to cut a picture then a new copy of the file is saved in a low quality jpeg format. How can I change this format or change the quality options?
    Thanks for any hints.
    wkr mhuew

    Thanks for your response. But maybe my question was not clear enough. If I start to cut a picture in PSE 8 Organizer (not in editor!) then there is a window to choose the area where to cut. If I press now apply then a new copy is saved automatically in a file with a low quality jpeg format. How can I change this default format or the quality options of this format?
    wkr mhuew

  • Problems with People Recognition in PSE 9 that were not in PSE 8.

    Hello, I recently downloaded PSE 9 Trial Version and imported a PSE 8 Backup into PSE 9.  It took quiet some time but it eventually converted the library to suit PSE 9.  I have noticed a couple of small things that I find very irritating and that seem to be a step backwards.  Firstly, when I am in people recognition mode, not all of the names auto complete when I type in the first 3 or 4 letters of the name like they used to in PSE 8, even though the people are in my people list.  This might not seem like a huge problem, but I have 100's of people in my catalog and if I do not spell the name exactly as I typed it before, I will create a second instance of the same person.  Secondly, when a bunch of faces come up in the "Name these people" Screen, I used to be able to hold down Shift or Ctrl key and select multiple people to name at once, PSE 9 wont let me do this, I have to name them one by one, even if they are the same person.  I'm sure this is just a small issue that Adobe will get around to, but it is a huge turn off from PSE 9.

    So it sounds like PsE is installed correctly if new people tags work correctly.
    I have seen another issue that might be related.  You can manually create a people tag by adding it to the people category.  As long as this tag exist in the 'root' people category, people recognition seems to work correctly.  You can also have people recognition create a tag during the people recognition process.  These are two different tag types if you look inside the database.  And they behave differently.  For example, you can merge tags which have been manually created whereas this functionaliy is not possible for tags created through people recongition.  (By the way, I would not recommend merging the manual tags because you will run into issues when PsE finds a face on a merged and deleted tag).
    Once a face has been tagged to a manual people tag, the tag can be moved into a sub-category.
    I don't know if tags created in PsE 8 are considered to be manual or not in PsE 9 but this may explain some things
    Have you tried to move the people tags to the root people category and see if the functionaly works as expected?
    I can't help you beyond this -- you have exhausted my people recognition skills.

  • Can the people recognition function in PSE 9 be configured to look for a specific person?

    HI All:
    I have over 100k photos in my library.  I'd like to have PSE 9 search through these images and identify only my family members.  For instance, I would like PSE 9 to serach for images of only my daughter and provide a tag for each image that contains her picture.  With this many photos it just takes too long to use the people recognition function because I must go through every person (face) that it identifies rather than just my daughter's.  So, is there a way in PSE 9 to restrict the photo recognition feature to search for only one person/face?
    Thanks, Jeff

    I have the same need. We have numerous app vendors that change their certificate that I need to deploy to 2500 PC's. We were using the registry via MS JVM to import these certificates. That is no longer an option with 2003 Server and Vista not supporting MS JVM. I have tried the Keytool as a login script process but it keeps asking for a password. Doubt we would ever be able to locate anyone who would know what it was. So far I have found the system deployment setup but am having problems actually getting it to work. Here is what I have so far for the deployment.config:
    deployment.system.config=file\:/M\:/Winstall/Utils/Javacert/deployment.properties
    deployment.system.config.mandatory=false
    The deployment.properties has:
    deployment.system.security.trusted.certs=file\:/M\:/Winstall/Utils/Javacert/Trusted.certs
    The Trusted.certs file ahs all the certificates we support from a network application point of view. Any help would be appreciated.
    Bill

  • People Recognition in PsE 8 vs PsE 9

    I have 16000 photos currently in PsE's version 8 organizer.  I'm thinking about moving to PsE 9 (also PrE 9).  Have PsE 9's people recongition features improved?  One of the previous releases of PsE would show faces from many photos and allow you to manually tag the photos.  This was very optimized -- although it would not attempt to automatically recognize the faces.  PsE 8 seems to only allow recongition in one photo at a time which is very slow - although it seems to actually guess on the faces for you as a head start.  What has changed in PsE 9?

    well , pse 9 has come up with better People Recognition this time , they have made the user interface better and speedier. Also , if you want to tag multiple faces at one time them simply select the desired images and click on face button present in the keyword panel. This will show up a dialog which will ask you to label some faces . On the basis of that it will give your suggestions too Hence making the entire process smoother.
    Its surely worth a try !

  • Reset "ignore" in people recognition in PSE 9

    Hi all,
    First, as I am no native speaker: please excuse my bad English, thanks.
    Does anybody know how to reset the people recognition?
    Problem: I did people recognition over my whole catalog. Doing this, I told PSE to ignore some people. Now, after a while, I would like to tag these people too (and not by using the "white rectangle" manually for some thousands of photos).
    If I click on people recognition now, PSE tells me, that there are no people unrecognized any more.
    ==> how can I get PSE 9 to "forget", which people where ignored and to suggest them all (except the ones with tag) again?
    Please help without forcing me to delete all my tags already set ;-)
    Thanks a lot in advance!
    Mano

    I would not recommend you remove the BreezeData folder or any content within this.  You will loose the ability for PsE 9 to make people suggestions on the existing media in the catalog.  In addition, attempting to run People Recognition on any existing media in the catalog will issue a dialog "No unabled people found in your selection" even though there are unlabled people.
    The only way I have found to reset the "ignore" option is to remove the media from the catalog and then re-import it.  Export the tags before you do this.  You will have to confirm faces again.  I would try baby steps with a small test catalog to make sure you don't loose anything before you try this on your real catalog.
    It would be great if Adobe could add an option (Under the Edit menu and with the right mouse click) "Run People Analysis" on photos which would allow you to start over with people recognition on a photo.  This would add the bounding boxes which were removed with the "ignore" click.
    This is what I think is happening...
    Once a media item is added to the catalog, a flag is set on that media item telling it that People Analysis has not been executed yet.
    If Media-Analysis/Analyze Photos for People Automatically is enabled, the People Analysis will run on newly imported photos.  This will identify potential people with the bounding boxes and some data which helps identify the face.  This creates the data in the BreezeData folder.  I think the bounding box information is also duplicated in the catalog.pse9db file -- but face identification data.
    If Media-Analysis/Analyze Photos for People Automatically is not enabled, People Analysis will run when you click on the "Start People Recognition".
    The people tag information is also stored in the catalog.pse9db file when you 'confirm' a face to the bounding box.
    Some flag must be set in the catalog.pse9db file after People Analysis is run on a photo to tell the system that People Analysis has run.  This prevents it from running ever again on that particular media item.  Running Auto-Analysis will not run People Analysis as it seems these are considered to be separate tasks.
    You will also run into problems if you edit a photo using photoshop elements and save it as the same file name.  Again, the Organizer will not make any recommendations on faces because people analysis was run once on the photo -- even though the content may have been changed.  The "Run People Analysis" option would help with this scenario as well!

  • Adding People in PSE 11 Organizer

    I've just started using PSE 11 Organizer and tried to add some of my pictures to People. I selected several photos in the Media Room and then clicked the Add people button. After a brief time, a dialog momentarily appeared and then immediatly closed and a ghost message appeared saying "No new people in your selection". I tried other different selections but all with the same result. I checked the People tab and there are no people listed there. What am I doing wrong?

    Go to:
    Edit >> Preferences >> Media Analysis
    Ensure People recognition is switched on.

  • Automatic people recognition in Elements Organizer

    Hi everyone,
    Because I have limited online disk space, I've been using Elements Organizer for quite some time to catalogue all my offline images. What I do is to burn all my images to DVD's and then import these images into Organizer as offline media with the “Generate previews” option. This way I can quickly find out on which DVD a particular image is kept. This way I save on disk space on my computer.
    Now I would like to get some advice and comments from you guys on using Organizer this way. I get the impression that the automatic people recognition does not work with offline media. Is this a correct assumption? How do you best optimize use of disk space when you have over 10000 images. My current version of Photoshop Elements is version 12.
    Your comments and advice is much appreciated. Thanks!
    Regards,
    Dave

    Hi, cihurst!
    Bridge doesn't currently have a way to recognize people, like Photoshop Elements Organizer, but the keywords should certainly be recognized! When you're in Bridge, check out the Keywords Panel (Window > Keywords Panel). It should contain the tags that you set in Organizer.
    Let us know if this helps!

  • Installing PSE 10....get hung up "restoring people recognition data"

    The installation seems to work OK.  My pictures show up in organizer.  but, program won't allow any options and shows "Restoring people recognition data".   stays at 1%.   stuck there.  I have tried reinstalling the software.  same thing.  hlep would be much appreciated.

    Moving this discussion to the Photoshop Elements forum.

  • People Recognition - stops working

    Hi,
    I have this problem with PSE8 bugging me.  I have been dealing with support but no success to date.  The People Recognition started working perfectly for me.  You select a group of photos - start the recognitions & it would find for example 30 photos of me & suggest they are me - you just accept that whole screen then it gives another screen of me or someone else.
    However after tagging for a while it stopped recognising me (& my wife & son, etc).  Seems that once a person is 'auto recognised' about 100-200 times then it stops.  So now any photos of me when I enter the People Recognition it finds the face OK but does not recognise it as me.  So I therefore have to type in my name on every photo.
    Now if those first tags of me were called say "Adam".  If I now recognise some of the new ones as "AdamF" then it merely goes on auto recognising in batches again under this new tag for another 100 or so photos.  Problem then is no easy way to combine them + it should just work without having to do this.
    Has anyone else experienced this?  Any ideas?
    Things I have tried.
    * New install on different PC - same issue
    * New catalog on same PC - same issue
    Thanks,
    Adam..

    Yeh Adobe don't beleive me either - they have stopped replying to my job on the issue - with no resolution or acceptance of the problem.
    The other unfortunate thing is that the only possible work around don't work .  We thought by giving a person a new name "Adam 2" would mean you could quickly tag another 200 or so (which you can) & then combine the tags.  This is where to problem lies though.  When you move the photos from Adam 2 into Adam all it does is tag the 'photo' with Adam not the face.  So when you then delete 'Adam 2' you end up with all the photos of Adam in the Adam folder OK - but these new ones are not tagged by the face - just photo tagged (if that makes sense).
    So no solution, no patch & no workaround at all possible (other than name them 1 by 1 which is not what I spent my $$$ on).
    Disappointing that this was the 'big sell' for PSE8 (in my view) & it is a big flop for anyone with more than a few hundred photos in total.

  • PSE 11 Organizer quits working when I try to create a slide program.

    How do I correct the problem of PSE 11 organizer not working when I try to create a slide program.

    I've got the same problem. I have just bought a Windows 7 PC with an i7 processor and 8Gb RAM. This wasn't an issue with my previous PC running Windows XP and PSE 6 so I thought it was down to PSE 6 and Windows 7 being somehow incompatible. I therefore downloaded a trial of PSE 8 but this also crashes every time I try to create a slide show.
    I have uninstalled Intervideo WinDVD as recommended by John's link and followed the other instructions as well but this bug doesn't seem to go away.
    However a workaround for me is that I can open previous slide shows (created under Windows XP and PSE 6), edit them and save as a new project. The slide show function is still very very unstable however and I have to save after each single successful action. It seems to crash at random but mostly when I try to insert any music into a project. It can be very frustrating and time-consuming for something that should be a very simple task for a grown-up, expensive program.
    Anybody got any other ideas? Of course I've reported this to Adobe but I'm not expecting a reply (I've never had one so far so why should they change?).

  • PSE13 Organizer Crashed during People Recognition

    I am using PSE13 on two computers with common photo folders on my NAS. The photos on the NAS are mapped to M:\ drive in M:\photos and are divided into a number of subfolders by year (e.g., M:\photos\2014). When I do a people recognition in Organizer on a single subfolder, the program often crashes during the 'analyzing photos' phase. Has anyone ever come up against this problem? Any solution recommended?
    Thanks
    Bob

    Hi Bob,
    I have sent you a private mail regarding this issue.
    Please see and help us with the information required to resolve your issue.
    Thanks,
    Anwesha

  • People recognition problem on PSE 12

    Hi there
    I've been having trouble getting the People recognition tool to work on Elements 12.
    It picked up a load of different faces at first, but I still have thousands of photos left which the programme now refuses to pick up faces from - whenever I select photos (even in small batches) it comes up with a message saying "No new people found in your selection". However, when I click on the individual photos it still has the windows round the faces asking me who they are.
    Any help to get the facial recognition tool working again would be much appreciated. I'd rather not have to go through each photo individually when batch tagging is so much quicker.
    Thanks

    My symptoms are exactly the same as Shelly95133.  WIN7/ PE12 . .....\Catalogs\\BreezeData path does not exist but I do have 4 files that reference "breeze" : breeze_preprocess_config, BreezeDB.dll, breezepreprocess.dll and BreezeRecognition.dll. Add people refuses to identify faces but when I go into each photo it sees faces but won't give suggestions.  Please help. I have many more photos to tag!

Maybe you are looking for