People who have ordered the otterbox for iPhone 4

I've read some have already received their otterbox in a few other discussions, so I just want to know how yours was shipped? I ordered my fedex ground and it still hasn't shipped. I ordered on Saturday, so that's two business days and still no email about it shipping. I've read where some of you received yours in just a few days after ordering, so I called Otterbox today and they told me that it's 7 to 10 days before it ships and another 5 to 7 for it to be shipped to me. I understand it's new, but that's no adding up with all of the posts I've seen on here where people are getting it a lot sooner. Please post when you ordered, how you requested it to ship and when you received it. If you add of those days up, it could take 3 weeks to get a case for my iPhone. I may just cancel if they hadn't shipped by this week.

jdbowden wrote:
I recommend you contact them on the status of your order.... 888.695.8820. Their web site indicated on Sunday when I placed my order that it could take 7-10 days to process orders.
Regards, John
Did you not see where I said that I had called Already? I know it says 7 - 10 days, but people are getting it much sooner.
D

Similar Messages

  • I have a question for people who have ordered personalized iPods online and picked them up at a Retail Store

    Is it possible to be credited in-store for recycling an old iPod even if you were already charged in full for the new device at the time of purchase?
    The difference between "yes" and "no" is about $30 and if it's "no" then I'll definitely forego the engraving, as much as I'd like to have it done for my intended 5G purchase (that is, assuming that Apple ever gives us an actual retail date).

    Firstly, the CS3 Design Prem comes with Photoshop Extended CS3, Illustrator CS3, InDesign CS3, Dreamweaver CS3, Acrobat Pro 8 as well as Bridge and and Vesion Cue.
    Secondly, has the packaging been opened? If so, it could still be installed on a PC or rather Macintosh somewhere. If so, this makes it a trickier proposition with regards to installing it yourself or selling it on.
    Don't quote me on this, but if the software is fresh and unopened or has been deactivated, you could upgrade to Design Prem CS4 Mac and then crossgrade to Design Prem Windows. Don't know if it's possible to crossgrade and upgrade in one fell swoop from Mac to Win. I suspect not - but will be happy to be proven wrong.
    Hope this helps.
    Ian

  • I need some people who can test the following for me - Wake on Ethernet Acc

    Hey there,
    i am sorry for crossposting but i need someone who can confirm something like a bug in 10.6.2 SL.
    What you need:
    Two Macs running 10.6.2 SL which are in the same Network.
    The following settings need to be activated on both Macs:
    1. System Preferences -> Energy Saver -> *Wake on Ethernet Access*
    2. System Preferences -> Energy Saver -> Computer Sleep set to never
    3. System Preferences -> Sharing -> Screensharing and File Sharing
    What you need to do is simple. Start both Macs so that they see each other in their finder.
    Now connect with one Mac to the other and wait a bit until you can see the folders of the distant Mac. As soon as those folders show up, click on the "Screensharing" Button on the upper right side of the finder. Enter your PW (if set up) and wait until you can control the other Mac. Now simply go to Apple -> Sleep on the Computer you just connected to via this screensharing session (by using this screensharing session and not the keyboard or mouse of this distant Mac). After this Mac went to sleep close the screensharing session.
    Now you need to wait for 2 hours. You are not allowed to start or use the Mac you just set to sleep.(The other one which you used for connecting to the other Mac may be used just as normal).
    Now here is the point where all of this gets "interesting". Because you enabled "Wake on Ethernet Access" the Mac you just set to sleep will wake up in about 2 hours to perform a sleep proxy announcement. Usually this Mac will wake up for 15 seconds without turning on the screen. After 15 seconds it should go back to sleep.
    What i found out: As soon as you set your Mac to sleep by using a VNC Tool like this Screensharing App (i.e. because you are not in the same room/city/country as the other mac and you cannot put it to sleep manually with the attached keyboard) the Mac will wake up but will NOT go to sleep again. This makes the whole Back to my Mac and Wake on Demand feature useless as it was designed to safe power and not to start a Mac (that was set to sleep by Screensharing) after 2 hours without automatically put it back to sleep.
    I need some proof that i am not the only one with this problem so i would really appreciate your help in this.. it will cost you 2 hours where you cannot use your second mac but it might be really useful to me if you have the same issues.
    What i already did while troubleshooting:
    -Reinstall the Firmware of my Cable Modem and Router
    - Restart every of my 3 Macs which behave like this
    - Reset PMU, SMC, NVRAM, PRAM and everything that is possible on every Mac
    - Reinstall the OS (only thing i installed were the updates to 10.6.2) on every Mac. Same issue on a clean fresh install.
    Thank you and happy new year from germany everybody
    greetings
    André

    *Important notice for Macbook/Macbook Pro/Macbook Air Users:*
    The "Wake on Ethernet Access" Option is only working when the Mac you just set to sleep via Screensharing is *connected to your power supply* *and its lid is NOT closed.* Please consider this in your testing.
    Thank you!

  • Traded in my iPhone for a different brand of phone. I had no idea that I had to sign out of iMessage before doing this. Now, my old phone is gone and my new phone cannot receive texts from people who have iphones and had me as a contact before. They try t

    Traded in my iPhone for a different brand of phone. I had no idea that I had to sign out of iMessage before doing this. Now, my old phone is gone and my new phone cannot receive texts from people who have iphones and had me as a contact before. They try to send an iMessage and I have no way to receive an iMessgae now. On some server somwhere my AppleID still tells people they should send me iMessages. What is the solution to this issue? Deleting my AppleID would work to solve this issue, but I cannot ever delete the ID? What can Apple do for this?

    If you did not erase your apps and data before getting rid of your old phone, try using Find My Phone and erasing everything remotely. See if this works.

  • HT3529 I'm trying to send messages to other people (who have iPhones, iPods etc.) from my iMac and as I hit the send button it always says "Messages couldn't send message to.." what do I do?

    I'm trying to send messages from my imac to other people who have apple devices and it always says "Messages couldn't send message to..." how can I send messages now?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Extra FaceTime IDs
    http://tinyurl.com/k683gr4
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Fix Can’t Sign Into FaceTime or iMessage iOS 7
    http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • Hello, maybe i am writing to the wrong place, but i'll try here. so i have a slogan idea for iPhone 5. to who can i write to?

    hello, maybe i am writing to the wrong place, but i'll try here. so i have a slogan idea for iPhone 5. to who can i write to?

    Try the link below.
    http://www.apple.com/feedback/iphone.html
    Stedman

  • APPHANGB1 when browsing the web, or just keeping it open. Happens once in a 5 minutes, and it freezes for 30 seconds. I found many people who have this problem too ....

    APPHANGB1 when browsing the web, or just keeping it open. Happens once in a 5 minutes, and it freezes for 30 seconds. I found many people who have this problem too ....

    Odds are only someone that develops apps for iOS would have access to whatever this is and, even then, this information may still not be available.
    I would do a backup of your phone & then erase it and restore from the backup to see if the odd behavior goes away. If so, something went funny with your update the first time around. If not, there's something in your backup that's making the phone throw a fit.
    I resolved my battery issues (more or less) by disabling the "set date/time automatically" setting. I haven't re-enabled it yet but my battery life has been much better with it off.
    ~Lyssa

  • Your rite its mistek and iam learn iam learning the lesson but you guys sholuld take them of action this kind of people who tourist come your contry for visit and they Cheating and stolen mooney like this sale fake stufffff is this **** all ......we are 1

    your rite its mistek and iam learn
    iam learning the lesson but you guys sholuld take them of action this kind of people who tourist come your contry for visit and they Cheating and stolen mooney like this sale fake stufffff is this **** all ......we are 10000 time better then you then bcz if we sale and we give all proff must you help us ....
    thanks

    hi,,,,
                   yes its my mistek by second hand phone and now this stupid man not answer my call and my messages iam back now dubai iam never think this us people cheating me ...and this man give me him id and paper on rite i have all APPLE people also not ready to help me i dont no what should i do its mean We united arab emirates people goood 100000000000000 % time honest and good bcz we never cheated like this ......i send him messages pleas send login password but he cant also i send email ples apple people if they want him id or copy of college and paper as he write sale to me but they said you learn what i learn if i buy second and myu mistek .....plea spleas apple people i request you help me to remove my phone this man icloud id and password pleas iam not offerd ...
    Thansk iphone 5

  • Possible upgrade solution for people who have HD and problems in general.

    OK, for me, Leopard has been as painful as going osx from OS9, at least the upgrade has been , dunno about the retail copy., bugs, bugs, bugs with the upgrade for sure.
    Here is what happens generally., you upgrade and basically you need to run disk tools from a external drive or the Leopard DVD., the problems move on still.
    Solution i found was to back up to another drive, that is right guys, spend another hundred bucks no one warned you about., get a external HD or if your living it high and collect macs as Apple assumes you may just have a second Intel mac laying around with a Sata drive in it to start up in "Firewire Target Mode", (hold the "T" at start up)and start cloning your drive with SuperDuper (also need to purchase)..
    Ok
    1- once you clone your drive (usualy a hour for the base system alone).
    2- erase it as one partition,
    3- in the options make sure it is set as GUID partition (takes about a hour) and
    4- then as well zero out all the data., takes about 2 hours there as well.
    5- Now run disk utilities from the Leopard DVD or the computer or booted up drive you used to do all this., if you can not fix permission of th volume you seen to reformat the Drive again 7 pass!, could take 4 hours.
    Finally you will be able re clone it, and run disk tools after a days work no one warned you about.
    *This disk utilities operation may take about 1 hour but say 11, and look like this below;*
    Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/bottom.jpg", should be 80, group is 99.
    Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/content.html", should be 80, group is 99.
    Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/Description.plist", should be 80, group is 99.
    Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/English.lproj/DisplayName.stri ngs", should be 80, group is 99.
    Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/thumbnail.png", should be 80, group is 99.
    Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/top.jpg", should be 80, group is 99.
    Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/English.lproj/DisplayName.strings", should be 80, group is 99.
    Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/bg_letter.jpg", should be 80, group is 99.
    Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/bg_pattern.jpg", should be 80, group is 99.
    Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/bottom.jpg", should be 80, group is 99.
    Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/content.html", should be 80, group is 99.
    Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/Description.plist", should be 80, group is 99.
    Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/English.lproj/DisplayName.strings ", should be 80, group is 99.
    *Good luck*
    *My ADVISE:* if you experienced these problems, as above, reformatting by zeroing out the data works. as for those who want Leopard. *DO NOT UPGRADE but install a RETAIL version of LEOPARD* until apple has a update,
    I read posts where people who have the retail copy (full DVD) have not experienced these problems, mine was a upgrade from Tiger since i got a mac in the last 30 days.
    WARNING: it has been hard to trust Apple fanatics with these things now days, many posts are denials to things not working so i could be wrong there as well, been honest saves time is all i can advise them.
    If anyone has beter advise please do post it.

    And what is yaml all about, shows up in disk utilities for hundreds if not thousands of issues?
    showed up as a user as well.
    Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/proxybasicauth-i.yaml", should be 0, group is 99.
    Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyAuthenticator/cdesc-ProxyAuthenticator.yaml", should be 0, group is 99.
    Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyBasicAuth/cdesc-ProxyBasicAuth.yaml", should be 0, group is 99.
    Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyDigestAuth/cdesc-ProxyDigestAuth.yaml", should be 0, group is 99.
    Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyDigestAuth/check_uri-i.yaml", should be 0, group is 99.
    Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/cdesc-UserDB.yaml", should be 0, group is 99.
    Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/get_passwd-i.yaml", should be 0, group is 99.
    Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/make_passwd-i.yaml", should be 0, group is 99.
    Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/set_passwd-i.yaml", should be 0, group is 99.
    Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPProxyServer/cdesc-HTTPProxyServer.yaml", should be 0, group is 99.
    ------------------------------------------------------------

  • To the people who have N96 device

    to the people who have N96 device, does anyones naviwheel is working? and do you have the square thingy next to the battery? and how do you call that anyway, and what is that for?
    plz reply..
    Solved!
    Go to Solution.

    im sorry about the square thingy. what i was thinking awhile ago was my old cellphone the nokia n78. and that square thingy one was kind of look like a "simcard" and located on the side of the battery bar on the upper right hand side of the screen.
    and from what i remember when i used to have that phone even if i wasnt using the WLAN, that square thingy was just stay there.
    sorry guys for my ignorance, i was just curious.
    plz reply....

  • Constant "you have changed the settings for the iphone" in iTunes

    On my iPhone 4, I can sync my phone with no issues, and when the sync is done and I switch over to the iTunes store or my library, it always pops up with "You have changed the settings for the iphone "my iPhone". Would you like to apply these settings?"
    I can hit apply, go to something different, come back, do nothing but sync my phone again, and as soon as I switch back to something else, I get the message again...
    I didn't change anything, but it keeps saying I have?

    Wow...
    That is pretty bad...
    From what I've gathered. There has been an increasing number of issues ever since iTunes 9 and more problems with iOS4 for the non iPhone 4 users.
    It's such a shame because I used to actually comment on how iTunes worked seamlessly and so quickly. This actually feels as if I'm running a typical bloated windows software now. [And to my great surprise, an equal number of people using iTunes on MacOS have given the same kind of feedback. I originally thought it was restricted to just windows users.]

  • For people who have had it die due to sweat - how did you have it?

    The title is basically my question. For people who have had it die due to sweat, what orientation/where did you have it? I'm just wondering if all the claims are from having the open adapter slot face up, where sweat would easily drip into it.

    @WalleWalle you are brave. Try drying it out in the sun or in some rice, and don't turn it on for a day or 2. The best thing to do would be to take it apart right away, disconnect the batter and wash the circuit with DI water, but that would be very difficult!

  • Hi, I followed the instructions to apply for the Made For iPhone Program. After submission of the necessary documents and information, I have not heard back from Apple. How to track the application progress? Can someone help?

    Hi, I followed the instructions from Apple MFI website, to apply for the Made For iPhone Program. After submission of the necessary documents and information, I have not heard back from Apple for couple weeks. How to track the application progress? Can someone help? < Edited by Host >
    Thank you.
    Best Regards,
    Gerald

    Hi Gerald
    This is a user-to-user forum, and your message will not be received by Apple. You will need to sign into your Developer/MFI account, and contact Apple that way. This can be done here.
    P.S Please do not post your e-mail address here.
    Taylor

  • Sync message, "You have changed the settings for your iphone.  Would you like to apply these changes?" What does this mean?  I don't recall changing anything...

    Sync message, "You have changed the settings for your iphone.  Would you like to apply these changes?" What does this mean?  I don't recall changing anything...

    The main settings that are changed in these cases can be found in this article:
    http://support.apple.com/kb/ht1386
    To ensure you don't lose any data you don't want taken off, ensure that each Summary, Apps, Music, Movies, TV Shows, Podcasts, iTunes U, Books, & Photos have the settings you would prefer on the computer. 
    If anything gets changed on any of those pages, you will be prompted with that message.  If they look fine, especially after adding some media like songs or videos, then you can apply the changes without fear.

  • Every time i have to download the update for iPhone But i have the updated file how to resolve this.

    Every time i have to download the update for iPhone But i have the updated file how to resolve this.
    any prodouct

    i am having the same problem, my error message is that basically it (connection) has timed out! i have tried all day to get it to go thur

Maybe you are looking for

  • Project librarys not included in WAR file with deployment (WEB-INF/lib)

    Using JDeveloper 9.0.5.2 Project Libraries are not included in WEB-INF/lib when deploying. Although the files are selected in the deployment file at 'Contributors'. Within the 'filter' the .jar files are missing. To solve it i have to register again

  • TACACS not working in ASA 8.0(3)

    We have quite a few ASA s with similar tacacs and crypto configs but yesterday we had issue with pix and we swapped pix with ASA 8.0(3) and tunnel is up and running but we are not able to login using tacacs even after the configs,, and i found a bug

  • Problem installing 8.1.6 Oracle for Netware

    I'm new to Oracle. I tried to install several times Oracle for Netware 8.1.6 and the Java installer says that the installation is OK. But the file to load Oracle, ORALOAD.NCF is empty !!! What can I do ?? Thanks in advance..

  • Reference record in another record

    Hi, I have two packages each having one record. Is it possible to reference the record of the second package in the record of the first package ? For example: create or replace pkg1 is type rec1 is record ( col11 integer, col12 ref pk2.col21 end pkg1

  • Iphoto: can't create link for webjournal

    When i want to make a webjournal from iphoto, i can't generate links. Publish link is grey and in the upper right corner the dot-circle is rotating and rotating and... When i cancel i see that the journal is on icloud, but i have no link! Any idea?