PeoplePicker not seeing Groups in second AD

Greetz!
I've got 2 AD Forests (client.local and company.local) setup with a 2 Way trust between them. When I use the people picker I can successfully add Users from my company.local domain and from the client.local domain to a SharePoint group. I can also
add an AD security group from company.local, however I cannot add a security group from client.local. Is there something special that has to be done in order to see groups in the client.local AD?
Thank yoU!
Love them all...regardless. - Buddha

Hi Buddha,
As far as I know, all domains and forests with a two-way trust relationship are available without any additional configuration steps. But in a two way trust, People Picker needs to be configured to return results from another forest other than the one where
SharePoint is installed.
For more information, yoiu can refer to the article:
https://technet.microsoft.com/en-us/library/gg602075.aspx
https://technet.microsoft.com/en-us/library/cc262051.aspx
http://www.sharepointtechs.com/active-directory-groups-not-showing-up-in-people-picker
https://social.technet.microsoft.com/Forums/en-US/d068aad9-97fe-4d86-aef3-805eb62a5ca9/unable-to-select-ad-security-groups-from-peoplepicker?forum=sharepointadminlegacy
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

Similar Messages

Do not disturb not seeing groups

Do Not Disturb does not seem to like any of the groups other than Favourites.
I have created a new group in outlook (operating through exchange server 2003), and another with the Groups app.
Neither of these show up in the Do Not Disturb list of groups to allow calls from.
Having tried the Do Not Disturb Whitelist app, which can't create a list from an exchange account, I wonder if the same issue prevents DND itself from recognising any exchange based contacts.
Help is appreciated!
Cheers,
John

John,
I'm the developer of Do Not Disturb Whitelist. The iPhone, whatever app is used, doesn't support groups when syncing contacts with Exchange. This means that no app can create or use groups on Exchange, even the apps from Apple.
P.S.
If you didn't notice the warning about exchange on the iTunes description for our app, ask a refund here: www.apple.com/support/itunes.
Hope this clarifies.

After creating two mac users do not see when I turn on the second

Hello , after installing Yosemite I created two administrative users , turn on the computer but I do not see you and the other , I have to get into the first and by this move to the second . how do I fix ? thank you very much

Hi jpacchioni,
I apologize, I'm a bit unclear on the exact issue you are describing. If you are saying that you are not seeing a login screen or the second user on startup, thereby forcing you to go into the first user and then switch to the second user, you may need to check your Login Options. You may find the following articles helpful:
Customize the login experience
If you are an administrator, you can specify how the login window looks to all the other users.
Choose Apple menu > System Preferences, then click Users & Groups.
Click the lock icon to unlock it, then enter an administrator name and password.
In Users & Groups preferences, click Login Options.
Click the “Automatic login” pop-up menu, then choose a user, or choose Off.
If you choose a user, then whenever the Mac starts up, that user is automatically logged in. If you choose Off, then at startup the Mac opens a login window showing all the users. Automatic login takes effect the next time you restart the Mac. For better security, don’t set your Mac to automatically log in an administrator. If FileVault is turned on, automatic login is disabled.
Select the options you want. If you have any questions, click the Help button for detailed information.
OS X Yosemite: Set up users on your Mac
OS X Yosemite: Login Options pane of Users & Groups preferences
Regards,
- Brenden

Since Yosemite my Macbook 11inch mid 2011 does not see second thunderbolt display anymore. My MacBookPro 13inch Early 2013 works fine, but it swaps the screens after an (re)boot

Since Yosemite my Macbook 11inch mid 2011 (supports Thunderbolt) does not see the second thunderbolt display anymore.
My MacBookPro 13inch Early 2013 works fine, but it swaps the screens after an (re)boot.
Does anyone else experience these problems and/or have solutions

Hello ROBLAHAY,
I'm sorry to hear you are having this issue with your MacBook Air. I also apologize, I'm a bit unclear on the exact configuration you are describing. If you are talking about using two external Thunderbolt displays (in addition to the internal display) with your Mid 2011 MacBook Air 11-inch, you may want to be aware that only a single external Thunderbolt display is supported on that model, as noted in the following article:
3. How many Apple Thunderbolt Displays can I use with my Mac in OS X?
The table below indicates how many Thunderbolt displays can be connected to Thunderbolt-capable Mac computers in OS X.
Computer
Maximum connected displays
Thunderbolt-capable Macs with Intel HD Graphics 3000 integrated graphics can support one connected Apple Thunderbolt Display (27-inch).
MacBook Air (Mid 2011)
MacBook Pro (13-inch, Early 2011) and (13-inch, Late 2011)1
Mac mini (Mid 2011), 2.3 GHz
Mac mini with Lion Server (Mid 2011)
One Thunderbolt display
Thunderbolt ports and displays: Frequently asked questions (FAQ) - Apple Support
If you are using just a single external display and still having issues, you may find the troubleshooting steps outlined in the this article helpful:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Sincerely,
- Brenden

DBCA did not see the ASM disk group in NODE 2 but see in NODE 1

Are there anyone who encountered creating a database using DBCA with ASM as file system?
Our issue before is in both nodes the DBCA did not see the ASM disk group.
But after setting the TNS_ADMIN in both nodes and running the DBCA as administrator in Node 1, the DBCA able to see now the ASM disk group. Unfortunately, in Node 2 it didn't work out?
So we didn't know why is it from Node 2, the DBCA still didn't see the ASM disk group?Since it is both the same.
Any ideas? Please advise.
For you information, we are using Windows 64-bit, Oracle 11g R2
Thank you in advance for those who will respond.
Edited by: 822505 on Dec 20, 2010 7:47 PM

822505 wrote:
Are there anyone who encountered creating a database using DBCA with ASM as file system?
Our issue before is in both nodes the DBCA did not see the ASM disk group.
But after setting the TNS_ADMIN in both nodes and running the DBCA as administrator in Node 1, the DBCA able to see now the ASM disk group. Unfortunately, in Node 2 it didn't work out?
So we didn't know why is it from Node 2, the DBCA still didn't see the ASM disk group?Since it is both the same.
Any ideas? Please advise.
For you information, we are using Windows 64-bit, Oracle 11g R2
Thank you in advance for those who will respond.
Are the disks given to the ASM are visible from Node2?
Aman....

After installing IOS6: after erasing the history of Safari, the next time I fire up Safari, I see a split-second of the last displayed screen of Safari. Not a big issue but it should not be that way.

After installing IOS6:
After erasing the history of Safari, the next time I fire up Safari, I see a split-second of the last displayed screen of Safari.
Not a big issue but it should not be that way.

Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
Trash the current Firefox application to do a clean reinstall.
Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Solaris 9 not seeing second path for few LUNs.

Hi,
We got 59 LUNs from EMC storage team. We are able to see all 59 LUNs in path. We are seeing 53 LUNs on second path, for 6 LUNs system is not seeing second path.
With syminq output we are able to see the device on both paths. Both HBAs has same number of entries in /etc/path_to_inst file. We rebooted and ran update_drv command few times still system is not seeing second second path.
Any idea why we are not seeing second path?
Here is sd.conf entry. lun 27 is good, lun 86 missing second path
name="sd" parent="lpfc" target=17 lun=27;
name="sd" parent="lpfc" target=17 lun=86;
name="sd" parent="lpfc" target=18 lun=27;
name="sd" parent="lpfc" target=18 lun=86;Thanks
SR

Hi,
We got 59 LUNs from EMC storage team. We are able to see all 59 LUNs in path. We are seeing 53 LUNs on second path, for 6 LUNs system is not seeing second path.
With syminq output we are able to see the device on both paths. Both HBAs has same number of entries in /etc/path_to_inst file. We rebooted and ran update_drv command few times still system is not seeing second second path.
Any idea why we are not seeing second path?
Here is sd.conf entry. lun 27 is good, lun 86 missing second path
name="sd" parent="lpfc" target=17 lun=27;
name="sd" parent="lpfc" target=17 lun=86;
name="sd" parent="lpfc" target=18 lun=27;
name="sd" parent="lpfc" target=18 lun=86;Thanks
SR

I am trying to install a second airport express to extend my network. When I use the aiport utility it does not see the second airport express.

I am trying to install a second airport express to extend my network. When I use the aiport utility it does not see the second airport express.

Suggest that you perform a Factory Default Reset as follows:
Pull the Express from power
Wait a few moments
Hold in the reset button and keep holding it an additonal 8-10 seconds while you plug the Express back in to power
Release the reset button and allow 40-45 seconds for the Express to restart
Apple's instructions to do what you want are here:
It will often help to temporarily connect an Ethernet cable from your Mac to the AirPort Express for the setup. Once the Express is configured, you can disconnect the Ethernet cable and move the Express to the desired location.
http://support.apple.com/kb/HT4259
Although an AirPort Extreme is shown as the extending device in the example, the setup for an AirPort Express is exactly the same

WHY DO I HAVE TO CLICK ON " GROUP YOUR TABS" IN ORDER TO SEE HOW MANEY TABS ARE THERE? WHY CAN NOT SEE THE TABS?

help...........
it happen, because i wanted to customize my fire fox and drag the tabs over navigation tool bar.. now i can not see the tabs unless i click on group your tabs button :( and can not change it any more

By PM
''hi John, i can not see, how many sites are open, because i do not see the tabs! i am sorry but i do not know how to explain it:( I see a window with my bookmarks -toolbar, menu bar and navigation bar, but no tabs for the sites, i am on! thank you for taking time and answering! ''
What happens when you open a new tab for instance use Keyboard shortcut Ctrl +T does that open a new tab that you can see. Please attach a screenshot of your ordinary Firefox page e.g. open on this forum. And a screenshot of the Group Your tabs view.
* [[How do I create a screenshot of my problem?]]
* [[How to make screenshots]]
I could suggest trying the Firefox reset, but that may be rather premature
* [[Reset Firefox – easily fix most problems]]

HT2736 i clicked GIft Songs.. next it took me to... password... click billing info... i put in the credit card number .... and my card gets charged Rs 60 for a Rs 15 song... how is this... Second, I do not see the purchase, not it asked me whom to gift th

i clicked GIft Song.. next it took me to... password... click billing info... i put in the credit card number .... and my card gets charged Rs 60 for a Rs 15 song... how is this... Second, I do not see the purchase, not it asked me whom to gift the song.

Have you added or changed your credit card details on your iTunes account ? If you have then each time that you do so a small temporary store holding charge may be applied to check that the card details are correct and valid and that it's registered to exactly the same name and address as on your iTunes account - it should disappear off your account within a few days or so.
Store holding charge : http://support.apple.com/kb/HT3702
Were you also charged for the song ? If not then do you get any error messages when trying to gift it ?

Mac mini: OS can not "see" second HDD.

Hello:
Through a series of unfortunate events I messed up the partition table of my Mac mini server. The OS can not "see" one of the 02 HDDs included in this mini server. Even trying to install the OS from the original DVD fails to see the second HDD, which used to have the boot partition and most of my data.
I boot up using the DVD into Disk Utilities, then I use the Terminal utility:
diskutil list
/dev/disk0 => 500 GB
/dev/disk1 => 500 GB
Please see screenshots here:
http://www.nihpo.com/static/images/01.jpg
http://www.nihpo.com/static/images/02.jpg
But here seems to be the problem:
/dev/disk2 => 1.3 GB
And partition "2" in this disk has the label "Apple_HFS Mac OS X Base System"
Shouldn't partition disk0s2 have the label "Apple_HFS Mac OS X Base System" instead?
Running OS X 10.8
Any suggestions on how to get the OS to "see" and boot from partition disk0s2 will be appreciated. Thanks.

And partition "2" in this disk has the label "Apple_HFS Mac OS X Base System"
Shouldn't partition disk0s2 have the label "Apple_HFS Mac OS X Base System" instead?
I'm not on 10.8 to be certain right now, but I don't think so...
diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     Apple_partition_scheme                        *596.2 Gi   disk0
   1:        Apple_partition_map                         31.5 Ki    disk0s1
   2:                 Apple_Boot Boot OSX                128.0 Mi   disk0s2
   3:                 Apple_RAID                         596.0 Gi   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     Apple_partition_scheme                        *596.2 Gi   disk1
   1:        Apple_partition_map                         31.5 Ki    disk1s1
   2:                 Apple_Boot Boot OSX                128.0 Mi   disk1s2
   3:                 Apple_RAID                         596.0 Gi   disk1s3
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     Apple_partition_scheme                        *1.8 Ti     disk2
   1:        Apple_partition_map                         31.5 Ki    disk2s1
   2:             Apple_Driver43                         28.0 Ki    disk2s2
   3:             Apple_Driver43                         28.0 Ki    disk2s3
   4:           Apple_Driver_ATA                         28.0 Ki    disk2s4
   5:           Apple_Driver_ATA                         28.0 Ki    disk2s5
   6:             Apple_FWDriver                         256.0 Ki   disk2s6
   7:         Apple_Driver_IOKit                         256.0 Ki   disk2s7
   8:              Apple_Patches                         256.0 Ki   disk2s8
   9:                  Apple_HFS Mac OS X Install DVD    16.0 Gi    disk2s10
10:                  Apple_HFS Tiger                   825.0 Gi   disk2s12
11:                  Apple_HFS Leopard                 1021.6 Gi disk2s14
Have you tried Repairing that drive with Disk Utility?

HT1918 Hello! Staff of E4 Group JSC use Apple devices for call, reading email and calendars. When the user open event in calendar of iPhone or iPad, he does not see attachments (picture №1, picture №2). But it is possible on Blackberry (picture №3).

Hello!
Staff of E4 Group JSC use Apple devices for call, reading email and calendars. When the user open event in calendar of iPhone or iPad, he does not see attachments (picture №1, picture №2). But it is possible on Blackberry (picture №3). How user of Apple can see these attachments? Recommend please any apps for it.

Hello!
Staff of E4 Group JSC use Apple devices for call, reading email and calendars. When the user open event in calendar of iPhone or iPad, he does not see attachments (picture №1, picture №2). But it is possible on Blackberry (picture №3). How user of Apple can see these attachments? Recommend please any apps for it.

Can i send group texts and have them be sent as indivuale texts so everybody does not see responses

How to send group texts and have them sent as individual texts so everybody does not see responses?

deref, Group messaging is a great way to keep everyone in touch. I use them quite frequently. When you send a group message the replies will be sent to everyone. You can send them individually so people cannot see the replies. RobinD_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

T450S: After upgrading main drive to SSD drive, do not see the second pre-installed SSD drive

Hello gurus, I replaced the HD with Samsung 500GB SSD, and have been loving it. However, ever since I did that, I do not see the 2nd pre-installed 15GB SANDISK SSD Drive anymore in the explorer. Anyone know what I can do to make the second drive be recognizable by the computer? This is potentially a related problem but I also have trouble installing Windows 10, because it says it can't find a partition. Can I use the second SSD drive as the partition for the install?

This smaller SSD is designed to use software and be a cache drive. It wouldn't show in File Explorer. You can check Device Manager.

TS1717 Hi i just rent a hd movie e i just could see the first ten minutes because occure a error this is the second time and you have charged the both movies i couldn t not see

hi i have rent couple of movies and two of them occur a error in the first 10 minutes and i could not see who s gonna pay my rental this is really unfare i pay for the movies and the download have stopped

lisab101,
We appreciate you reaching out to us. We greatly appreciate the feedback that you have provided us. Please know that we will lift this up to management and the issues will be addressed.
Thank you,
RobinD_VZW
Follow us on twitter @VZWSupport

PeoplePicker not seeing Groups in second AD

Similar Messages

Maybe you are looking for