PeopleSoft CS SAIP Announce Status Issue in Bulk Data Exchange Status

XML is generated in the provided Directory Path under SAIP “Web Service Targets” but “Announce Status” is blank under Bulk Data Exchange Status, Even the “Event Message Monitor” shows nothing!
We have activated all SAIP service operations and their delivered routings on our side.
The Transaction status under Bulk Data Exchange Status page says Announced but but “Announce Status” is blank on the same page.
Announce status should have any of these possible values per PeopleBooks (Connector Error,Failure,Processing,Success,Unsupported)
What could be wrong? Please help. Thank You...
Regards,
Ashish

You are welcome. I'm glad you got it back up.
(1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
(2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
(3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
(4) Add some SARE rules:
Visit http://www.rulesemporium.com/rules.htm and download the following rules:
70sareadult.cf
70saregenlsubj0.cf
70sareheader0.cf
70sarehtml0.cf
70sareobfu0.cf
70sareoem.cf
70sarespoof.cf
70sarestocks.cf
70sareunsub.cf
72sare_redirectpost
Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
backhair.cf
bogus-virus-warnings.cf
chickenpox.cf
weeds.cf
Copy these rules to /etc/mail/spamassassin/
Then stop and restart mail services.
There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

Similar Messages

Bulk Load API Status

Hi,
I'm using Oracle Endeca 2.3.
I encountered a problem in data integrator, Some batch of records were missing in the Front end and when I checked the status of Graph , It Showed "Graph Executed sucessfully".
So, I've connected the Bulk loader to "Universal data writer" to see the data domain status of the bulk load.
I've listed the results below, However I'm not able to interpret the information from the status and I've looked up the documentation but I found nothing useful.
0|10000|0|In progress
0|11556|0|In progress
0|20000|0|In progress
0|30000|0|In progress
0|39891|0|In progress
0|39891|0|In progress
0|39891|0|In progress
0|39891|0|In progress
0|39891|0|In progress
0|39891|0|In progress
40009|-9|0|In progress
40009|9991|0|In progress
40009|19991|0|In progress
40009|20846|0|In progress
Could anyone enlighten me more about this status.
Also,Since these messages are a part of "Post load", I'm wondering why is it still showing "In-Progress".
Cheers,
Khurshid

I assume there was nothing of note in the dgraph.log?
The other option is to see what happens when you either:
A) filter your data down to the records that are missing prior to the load and see what happens
Or
B) use the regular data ingest API rather than the bulk.
Option b will definitely perform much worse on 2.3 so it may not be feasible.
The other thing to check is that your record spec is truly unique. The only time I can remember seeing an issue like this was loading a record, then loading a different record with the same spec value. The first record would get in and then be overwritten by the second record making it seem like the first record was dropped. Figured it would be worth checking.
Patrick Rafferty
Branchbird

Transfer Order Status Issue

Hi All.
For the delivery we are Creating the Transfer Order using the Transaction LT03 . Currently we are having issue with Transfer Order status.When we look the document flow for the transfer order, TO status reads as "Completed" instead of "open" whereas deleviry status is still in "being Processed" status.
Please give me the solition , why status goes to "Complete" status instead of "Open".
Thank you,
Cha
Edited by: Chabalan on Oct 5, 2011 10:57 AM
Edited by: Chabalan on Oct 5, 2011 11:00 AM

Hi Cha,
I thought it is a one-off issue.
You mean the TO is not yet confirmed using LT12 but status already shows complete?
Delivery is in correct status as the pick/pack and PGI steps are not completed..but for TO status, if it's confirmed then it should be complete.
Pls confirm what's your scenario?
Regards,
Raghu.

Timeout issue in Bulk Edit Tool

Hi,
I request help to resolve an issue in Bulk Edit Tool (Solution Starter). I have deployed Bulk Edit Tool in Ms Project Server 2010 environment. However, I am facing following issue in Bulk Edit:
After entering filter criteria in the first page of Bulk Edit wizard, the wizard just displays Loading Content. However, no projects are filtered and displayed.
I couldn't find any messages in ULS logs and App Server logs to troubleshoot this issue. Any help in this regard will be appreciated.

Abhijit,
Frankly I have never been able to get the bulk edit tool to work.
I know few other people had success using it but for me t always hanged up and froze when I tried to use it. Since this is not officially supported any more, I can only suggest that you try a different
solution or start looking into the source code itself.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

Status issues across multiple devices

Hi. I seem to be having the opposite problem to most people reporting status issues. I have friends telling me I'm always away or offline in the evenings, even tho I have 5 devices I can use Skype on. My main 3 clients are my win7 work PC (which I quiet often leave on over night), my xbox one which is on most evenings, and my iPhone. I also have an iPad and win8 laptop But I only occasionally use these for Skype.
Do I have to sign in to the Skype app every time I switch on my xbox one to get it to show me as online? Is there something else I need to do? Do you think it's because I have too many clients?

When I try to go to iTunes music match on her phone it asks me to sign into match, which I am assuming is the same as her Apple ID name and password. This is a different name and password than my account. So, it seems that she cannot access my "cloud" from her phone in order to download music that I have purchased. I guess since she has her own iClud account, she needs to sign up for iTunes match through that account and pay the fee. I was hoping we could access the same 'Cloud" to have the same library of music? Hope that made sense.
Thanks for the help.

Bundle Status Issues

Hello,
Several of our bundles are reporting their effective statuses incorrectly. For example, one bundle that makes a bunch of registry changes has been installed successfully on every device I've checked, yet it only reports as being effective on 34 devices, with 253 pending. This is definitely incorrect. Any ideas? How does Zenworks determine if all a bundles actions (ie. registry edits) have been completed successfully?

hi
i have this status issue also. i have 22 device succeeded, but when i click on it, it list's me no device.
i really need this function, to control where it has installed and where not.
i have ZCM 10.3.3. on SLES 10.
have the debug activated, look at the zmd-messages.log but really dont know for what to search !!!!
i opened a ticket, but they dont have a really fast solution....(no solution till yet).
Sascha
>>> Anders Gustafsson<[email protected]> 22.11.2010 09:50 >>>
Chewmanfoo,
> Thanks. 10.3.1 and I'll check the logs.
>
Note that you will need debug logging to see anything useful.
Check zmd-messages, but make sure a zac emp wakeup
is done first. See:
http://www.novell.com/support/viewCo...rnalId=3418069
- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)
Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

Hi, I finally got lucky and past the "other" memory status issues when syncing. Now I'm "waiting for changes to be applied" sync stuck all night (itunes yesomite iPhone 6 plus). is this a bug? I have not had a single successful sync with yesomite.

hi, I finally got lucky and past the "other" memory status issues when syncing. Now I'm "waiting for changes to be applied" sync stuck all night (itunes yesomite iPhone 6 plus). is this a bug? I have not had a single successful sync with yesomite.
please help. this issue prevents music from syncing. I have set the sync setting to convert songs to 192kbps AAC to save space, I figure that could slow the sync
down, but it's hanging indefinitely (I've left it for 24 hours with out it completing.)
the the only music that appears on the phone are songs purchased from the iTunes Store. 95% of my collection are rips from my CDs.
thank you for any help!

Yeah it's pretty sad that $1000 phone they put out you such cheap memory It causes issues, I have iPhone 6+128 GB actually this is the second brand-new one they gave me because they keep affording it trying to act like that's not the issue because they're too stupid to know how to check what memory is in each one before they give it to me when I have told them multiple times my back up runs perfectly fine on two 5s phones and a 6 64GB of course running MLC memory.
I told them it's because just like the write ups say I have 809 apps but I have not even put all my music on the phone so I'm still running 50 to 60 gigs free and it crashes and reboots itself sometimes in multitasking and more often than it does that in between multitasking I get a black screen for 1 to 2 seconds in between apps and upon start up the Apple logo screen will flicker and do weird things, One of the genius idiots asked me if I could just delete some of my apps, really that's the answer to fix the phone the customer needs to limit the amount to apps they put on their phone, why the **** get a 128 gig if you can't put on anything you want to it guess they need to start selling them saying you can only put a limited number of apps on them, it's really is a **** joke, I have over $20,000 of Apple merchandise easily and always get the new phone every year but I'm starting to reconsider my decisions in the future because this company is starting to go downhill, The reason water not recalling the phones is because they're dealing with their top-of-the-line thousand dollar phones in this case and most people don't have over two or 300 apps so they're not having as many issues, so basically they have messed up phones they just don't know it in their hands and Apple is just too **** greedy to recall the phones, they'd rather sell customer spends that only work half ***.
Stuff like this will be the downfall of their company, all the people that stay with them because as long as you don't jailbreak their stuff it normally just works without issue will be soon jumping ship if stuff like this keeps up, because I can guarantee they got me thinking now.
not that I wanted to know or should I be expected to but I even offered for them to open up my brand-new phone and just replace the memory to MLC memory which is something I shouldn't have to do with a brand-new **** phone, they should just make one with the right memory and give me a new phone, actually just don't sell customers that buy the top-of-the-line phone from you trash ones in the first place that would be a great option.
what burns me up the most is when you talk to AppleCare and Genius Bar they try to act like the issue isn't there and they're unaware of it, they say that Apple hasn't come out with any information about it, yeah that's because they don't want to recall the trash.
Apple has became nothing better than your run-of-the-mill company, android is becoming just as good as they are sad to say this since I have been an Apple fan for so long but there is no excuse for BS like this they have been looking for options to fix my phone for a month now this is not the way you should treat loyal customers, I would've been better off keeping my 5S and in the future just switching to android.
it's pretty sad that the company has no idea how to check which memory is in their **** phone and even after I offered to let them just replace the memory in my new phone by opening up my brand-new phone to replace it they have no idea how to do that either, yeah Genius Bar sure, I think that should change the name to idiot bar and Apple don't care instead of Apple care.

PR status on a particular date..

Gentlemen,
I have to develop this Report for Procurement for the buyer monthly Performance.
In this one of my requirement is to get all the PR's which were open before 1st of may..(or which ever month they like to see)
How can i get these PR's..?
Please suggest some solution...appreciate ur help..
thanks.

Hi Srinivas,
I did actually say in my post that performance would be an issue with this approach. But it appears that in standard functionality there is not much more you can do.
There are a lot of ways to be smart with the way you select your initial candidates, however. You dont need to select all PRs with status p,A,K. On the PR Eban table, you have ERDAT which is last changed date. You can exclude all p,A,K records whose last changed date is before your report date as they have not changed after the report date and hence will not have changed status after the report date. This is just one example, there will be many more you can choose (maybe a business rule is that PRs older than 2 months are not relevant, restrict by purchasing org, purchasing grp etc.).
If you still don't like this solution then you will have to do some enhancement of the PR/PO transaction. There are no standard change documents for PR status, so you can perhaps use a BADI/User exit to update a z table every time the PR status changes. Just record the PR number, the old status, the new status, the date, and the time.
Then your report can use the z table in its processing.
I thought your question was related to standard functionality. If you are prepared to enhance the PR transaction then clearly you will get a solution which performs better.
Cheers,
Brad

Issue while activating data objects in doe

Hi All,
Im very new to Netweaver mobile 7.1 development. I created bappiwarappers using wizard and and completed it successfully. But when im trying to activate the data objects it goes into runtime error stating eceution time exceeded. I increased my execution time and tried still it goes into dump.
But when i come back and see data objects its status under data objects details shows active but the light is still yellow which should be green.
Lastly when i try to activate backend adapter it says "Unable to find generated objects in repository". I think im missing something how to identify he issue?
Regards,
Asif.

You can check the status of the data download in administration portal
If you are using SP09 or below:
Goto NW Mobile Administration -> Monitoring -> Logs & Traces -> BACKEND_INTEGRATION and provide SWCV Name and click on "Go" button. It will display the load information of all the objects where on expansion of the nodes will give you the exact status. whether load failed or success. We will get a clue based on the status.
If you are using SP10:
Goto NW Mobile Administration -> Monitoring -> Process Monitoring. Here you can get the status of all the data downloads.
Regards,
Siva.

Optimization for bulk data upload

Hi everyone!
I've got the following issue:
I have to do a bulk data upload using JMS deploy in a glassfish 2.1, to process and validate data in a Oracle 10g DB System before it is insert.
I have my web interface that loads a file and then delegates the process to a Stateless Session Bean which read a N number of lines and after that send a message to a JMS Queue. The JMS has to parse the each line, validate them with the data already in the DB, and finally persist the new data.
This process is high process consuming, and I need to improve the performance time. I tried to change glassfish default JMS and JDBC pool size, but I have no a huge difference.
Do you have any advice that could help me?
Thanks in advance!

Hi! thank you for you answer!
High process consuming is in the MDB
I'm grouping each N number of read lines in the EJB and then send the message to the JMS. The MDB process the persists each line as info in different related tables.
Thanks again!

Deployment Status not reflecting correct application installation status

Morning All,
Running into an issue where the application Deployment Status does not properly reflect the state of the application install.
The software installs, works properly and is reported in Software Center on the client PC as being installed succesfully however the status within CAS shows "In Progress" with a description of "Program started".
The application in question is Cisco Network Access Manager which terminates the network connection and requires a reboot before restoring. Additionally the site is behind a NAC switch which adds another layer of security to the network at that loation.
Currently I have deployed to 90 test machines - 65 of which have reported in as succesfull, the remaining 25 have installed and are working but are not being updated in the Deployment Status.
I have checked the Sender.log on the site server and link analyzer between the primary & secondary. I have also checked the client heartbeat and statemessage.log all seems well - no errors reported.
Additionally I have reviewed the WMI status on the client and repaired (just in case).
Through google search I have also ran the following:
Option Explicit
On Error Resume Next
Call RefreshServerComplianceState
' WScript.Echo "Finished"
Sub RefreshServerComplianceState()
' Initialize the UpdatesStore variable.
dim newCCMUpdatesStore
' Create the COM object.
set newCCMUpdatesStore = CreateObject ("Microsoft.CCM.UpdatesStore")
' Refresh the server compliance state by running the RefreshServerComplianceState method.
newCCMUpdatesStore.RefreshServerComplianceState
' Output success message.
' wscript.echo "Ran RefreshServerComplianceState."
End Sub
As well as forcing a check in from the client and running the summarization on the CAS.
So far nothing seems to trigger an update. I'm hoping someone can point me in the proper direction in regards to diagnosing this problem.
Many thanks, Jeff

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Urgent issue, Suddenly no data is extracted Once I create new infopack

Hi,
I have an urgent issue and need help.
We were loading data after activating business content. Every thing worked fine and the delta load was also smooth.
However, in order to start everything afresh, I deleted all the info package, deleted the "Intialization option for the source system" AND then created my infopackage for Full upload with initialize option.
In this case the extractor didn't find any data. Please see the following log from the monitor "status " Tab.
"No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system."
This is not correct since we were loading data ( full and delta ) successfully before and there are data in the system. This is most probably to do with the delta queue initialization in the source system.
We were looading data from datassource 0CRM_SALES_ORDER_I.
Please help, we are really stuck.
Thanks
Arunava

hi Anurava,
take a look oss note 692195, i think authorization issue
Activities : 0CRM_SALES_ACT_1
oss 692195
Question 2 : On executing transaction RSA3 I get records but I find 0
records when I load data from BW request.(No Data Available).
How can I extract data in this case?
Suggestion 2: First check if there are any entries in the table
CRMD_ORDER_INDEX.Only if there are entries in this table you can
extract records.
If this is not the case then,
It is possible that the user does not have sufficient
authorities for extraction of the relevant objects.
Additionally, please review and implement the following notes
615670
161570
150315
618953
If you are in the release 4.0 then
To do BW extraction with the user please see that the following
authorization object exists(display mode is enough):
CRM_ACT, CRM_OPP, CRM_LEAD, CRM_SAO, CRM_SEO, CRM_CO_SE, CRM_CO_SC
CRM_CO_SA, CRM_CON_SE, CRM_CMP, CRM_ORD_OP, CRM_ORD_LP, CRM_ORD_PR
CRM_ORD_OE, CRM_CO_PU, CRM_CO_PD, CRM_ORD_PO
(all these objects are linked to transaction crmd_order).

"System status AALK is active" and "System status LKD is active" errors

Hi,
We are on SRM 4.0. When creating a shopping cart from a specific catalog the user is receiving two error messages.
"System status AALK is active" and "System status LKD is active"
How do I resolve these errors?

It's more like a CA-JVA-JVA-PP or PS-ST-INT-BAPI issue, recommend to report a message under one of the component.

Change in status network For superseded and obsolete Status

Hi All
Users are incorrectly changing the status of Controlled Documents from Superseded (SU) and Obsolete (OB)…….. to Cancelled (CA).
SAP DMS Process should not allow Controlled Documents that are status Superseded (SU) or Obsolete (OB) to be changed to status Cancelled (CA).
According to me Cancelled status can be attend at any stage. there is no Configuration like excluding Cancelled status from any 1 of the status.
kindly suggest on this Issue as how we can Approach on this
Thanks in advance

Hi Shankar,
I guess you can do this from SPRO.
project systems>>Structures>>Operative Structures>>Work breakdown Structures
Check if you can do this in WBS User status and Create project profile.
Regards,
Gautham Paspala

Transfer bulk data using replication

Hi,
We are having transactional replication setup between two database where one is publisher and other is subscriber. We are using push subscription for this setup.
Problem comes when we have a bulk data updates on the publisher. On publisher size the update command gets completed in 4 mins while the same takes approx 30 mins to reach on the subscriber side. We have tried customizing the different properties in Agent
Profile like MaxBatchSize, SubsriptionStreams etc but none of this is of any help. I have tried breaking the command and lot of per & comb but no success.
The data that we are dealing with is around 10 millions and our production environment is not able to handle this.
Please help. Thanks in advance!
Samagra

How is the production
publisher server
and subscriber server
configuration ? both are same ? How about the network bandwidth ? have you tried the same task with during working
hours and off hours ? I am thinking problem may be with network as well as both the server configuration..
If you are doing huge operating with replication this is always expected, either you should have that much configuration or you have divided the workload on your publisher server to avoid all these issues. Why can you split the transactions ?
Raju Rasagounder Sr MSSQL DBA

PeopleSoft CS SAIP Announce Status Issue in Bulk Data Exchange Status

Similar Messages

Maybe you are looking for