PeopleSoft HCM/CS integration in Portal 10.1.4

Hi everybody,
I've got a "small" question;
We're starting with a project to implement a portal via Oracle Portal 10.1.4. We want to integrate some functions/information out/from our business applicaties PeopleSoft HCM 8.9 (PT 8.46.07) and PeopleSoft CS 8.9 (PT 8.46.07).
What is the easyiest way to do this? we prefer not to direct querying the database.
Thank you for your help.

Did nobody did this already? To bad, thought that Oracle Portal was large implemented over the world today haha

Similar Messages

  • Can Peoplesoft HCM 9.2 can be integrated with Oracle HR Analytics?

    Hi All,
    Please help me understand if Peoplesoft HCM 9.2 can be integrated with Oracle HR Analytics? If so what is the latest Version  for that.
    What is the road map for that.
    Thanks in Advance
    J Smith

    Normally, Oracle will lag behind in certifying the latest PSoft releases...however, we are using OBIA 7964 with PSoft FSCM 9.2 using the 9.1 SDE adaptors.  It seems to work fine.  In general, its best to ensure the version is certified but you can ask Oracle support if the 9.1 adaptor can be used for 9.2 HCM.  If there are not significant structural changes for the tables in PSoft, it may work.  As for the dates for certification, Oracle would have to assist with that.  We have asked about FSCM 9.2 4 months ago and it is still not certfied.
    Pls mark correct...

  • Peoplesoft HCM 9.0 Integration with Oracle R12 through Integration Broker

    We are having the two latest application at our site.
    1 Peoplesoft HCM 9.0 for HR + Payroll
    2 Oracle R12 for remaining business process like SCM + CRM
    Now we have an requirement to transfer data between peoplesoft and oracle finacial.
    presently we have written the interfaces to transfer data between these systems.
    Can anyone suggest me that is it possible to transfer data between these two systems through Integration Broker ?
    your suggestions are welcome.
    Thanks
    Parth

    Thanks HakanBiroglu for the response.
    I went through the post. I am aware of these steps.
    But I need help on point 2.
    2.There should be single sign on setup between these DB's
    How to achieve this ?

  • Degree Date not mapped into Peoplesoft HCM 9.2

    We have installed PeopleSoft HCM 9.2 and People Tools 8.53.We are using PeopleSoft HCM 9.2 Demo database in our test environment.We have integrated our Resume Parsing solution with PeopleSoft HCM 9.2.Our Parser is capable of extracting degree date from the resume content.We are finding issue with Mapping "Degree Date" into respective field.
    We are trying to Map the "Degree date" as field in Degree section in Poeplesoft HCM system using HR XML mapping  as per Recruiting_Solutions_9_2_Integrations_Setup.pdf documentation.
    XML LOCATION                 : Candidate.Resume.StructuredXMLResume.EducationHistory.SchoolOrInstitution.Degree.DegreeDate
    DATA OBJECT LOCATION  : CandidateItems.. JPM_DATE_6
    RECORD LOCATION           : HRS_APP_ITEMS. JPM_DATE_6
    Oracle Recruiting solution document says "Degree Date" is mapped to "HRS_APP_ITEMS.JPM_DATE_6" field in Peoplesoft HCM 9.2 Application. (Please Refer page no 65 ).
    We are finding that this mapping is not happening as expected
    Does anyone know how to resolve the issue ?

    As stated in the following doc, this issue has been solved in PeopleTools 8.53.04 patch
    E-SES: Problems Deploying Search Definition With PeopleTools 8.53 And Oracle SES 11.1.2.2.0 [ID 1558997.1]

  • BI Integration in Portal (Where to configure Port, problems with km-integr)

    Hello,
    I am new to BI and started to integrate BI into the portal or rather tried it.
    When I open my Bex-Excel-Workbook and try to create a document (right mouse -> jump -> documents) an error occurs that the service is not reachable. This is because of an wrong port.
    Could someone tell me where I can change the port that he is using when the portal is called out of excel?
    Changing the port in the browser I am facing some other problems like (sorry I don't know how to translate it exactly):
    Properties for the assignment couldn't be provided
    Could not determinate repository for documents with this property typ
    Error during open new document-dialog
    Has someone an idea how to investigate this problem? could it be because of the wrong port and where to configure the port?
    Thanks a lot,
      Vanessa

    Hi,
    Please refer the below links for BI Integration in Portal
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a&overridelayout=true
    http://help.sap.com/saphelp_nw04/helpdata/en/a3/7b583c2439e66fe10000000a114084/content.htm
    http://www.sdn.sap.com/irj/sdn/nw-datamanagement?rid=/library/uuid/a5067965-0901-0010-6f8a-bbf0b7424283
    Hope it helps you,
    Thanks & Regards,
    Ravi.

  • Very Urgent! SAP Access via HCM Reports in Enterprise Portal 6.0

    Hi SAP Experts,
    it is very urgent.
    When our Users execute Reports via HCM Reports in Enterprise Portal 6.0 and exit them via the Menu Button (Menu->List->Exit) in the Report result they can access SAP Backend via Easy Access.
    My Question: Could we find out which Users and at what time they had accessed the SAP Backend via this gap?
    Best Regards,
    Nadin
    I will reward Points!
    Edited by: Nadin Schaa on Feb 12, 2008 9:48 AM
    Edited by: Nadin Schaa on Feb 12, 2008 9:49 AM

    Try these may be helpfull
    U can find list of users in backend and also trancations codes they r accessing
    SM04 -- u can find list of users
    Regards
    Krishna.

  • Problem with Print functionality in the BI reports integrated into portal

    Hi,
    We have some BI reports integrated into portal.and we have a Print button,which is a standard SAP functionality,doesnot work.When we click that print button it takes forever to load the page and print it.
    Please help me in resolving this issue and points will be rewarded for sure
    Bala

    Hi Edward,
    Can you clarify on your statement "You can run 3.x queries normally". I am currently declaring the bex web application string in the BW iview created in this format "infocube=0D_FI_C01&query=0D_FI_C01_Q001" and i am not defining the report template anywhere in the iview properties but still the standard template is displayed.
    Pls let me know how to run 3.x queries normally.
    Also i am trying to integrate only reports which are developed for BW 3.x format in BI system but still the data is not displayed.
    Pls let me know incase the SP level of both EP and BI portal are to be considered for this.
    EP 7 portal is on SP9 where as BI 7 is on sp12.
    Also i noticed the EP portal doesn't have BI Java Addon. will this matter for displaying reports in BW 3.x format.
    As you suggested workaround i tried to create a url iviews directly taking the links from the reports displayed in BI portal , i was able to preview the report but when i added those iview reports to role, the reports are constantly loading as it is trying to contact BI system. There are being loaded constantly with nothing displayed on screen.
    "http://sapbw:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0D_PU_C01_Q011&VARIABLE_SCREEN=X&DUMMY=1"
    regards
    Bharat

  • Problem with Print button in the BI reports integrated in portal

    Hi,
    We have some BI reports integrated into portal.and we have a Print button,which is a standard SAP functionality,doesnot work.When we click that print button it takes forever to load the page and print it.
    Please help me in resolving this issue and points will be rewarded for sure
    Bala

    Solved myself.
    The answer lies in this link:
    http://help.sap.com/saphelp_nw70/helpdata/en/76/489d39d342de00e10000000a11402f/frameset.htm
    See the following two properties under Paging:
    Columns Scrolled for Each Step (BLOCK_COLUMNS_STEP_SIZE)
    Rows Scrolled for Each Step (BLOCK_ROWS_STEP_SIZE)
    The values of these two properties have to be changed in the Web Template you are using for your BI Reports.
    Regards,
    Ankur

  • PeopleSoft HCM 9.1 OVM in a single VirtualBox guest machine

    Following a suggestion from Jim Marion in an earlier post in this forum, I started installing the PeopleSoft HCM 9.1 OVM using a single VirtualBox guest. The PeopleSoft OVM appliances are delivered as two separate virtual machines, one for the DB and another for the PIA/App-Batch. Since I am running on a 4 GB RAM laptop I wanted to conserve memory by installing on a single virtual machine.
    As I was starting to figure out the changes needed in the configuration scripts, for example creating a symbolic link instead of an nfs mount for PS_APP_HOME, I got a surprise. Lo and behold, the good folks at Oracle had already thought of this! In the oraclevm-template.sh there is an environment variable VBOX_SETUP that is set if the script detects the existance of both PS_DB_HOME and PS_HOME. This triggers the installation of all the tiers -- DB, App-Batch, PIA -- on a single machine. With a few tweaks I was able to get a fully functioning HCM environment with a single execution of the setup script.
    The starting point for installing PeopleSoft OVMs on VirtualBox is these two blog posts:
    [url http://jjmpsj.blogspot.com/2012/05/converting-peoplesoft-ovm-templates-to.html]
    [url http://jjmpsj.blogspot.com/2012/06/converting-peopletools-ovm-template-to.html]
    Since I was only using a single virtual guest I mounted all the file systems at once. Here are the entries (excluding the System images which are only mounted temporarily as explained in Jim's blog posts):
    in VirtualBox:
    SATA Port 1: Oracle11gR2.vdi (Normal, 4.41 GB)
    SATA Port 2: HCMDB.vdi (Normal, 26.38 GB)
    SATA Port 3: Tools.vdi (Normal, 11.25 GB)
    in /etc/fstab:
    /dev/sdb1               /u01                    ext3    defaults        1 3
    /dev/sdc1               /opt/oracle/psft/ptdb   ext3    defaults        1 4
    /dev/sdd1               /opt/oracle/psft/pt     ext3    defaults        1 5I commented out the ovm_set_password and ovm_configure_network steps in /u01/scripts/db-reconfig.sh since I had manually set up a static IP on my guest. (Note: this script no longer bothers checking for or setting up oracleasm so you don't need to worry about that). I also uncommented the DEBUG_PSFT_OVM variable in the /opt/oracle/psft/vm/oraclevm-template-utils.sh script. Doing this bypasses the root password reset and networking configuration in the oraclevm-template.sh script.
    I modified the .bash_profile script for psadm1, psadm2 and psadm3 to use the ORACLE_SID that the setup script discovered based on the contents of $PSFT_DB_HOME/oradata and added $PS_HOME/setup to the PATH for COBOL compiles:
    # psft env vars
    export PS_APP_HOME=/opt/oracle/psft/pt/apptools
    export PS_CFG_HOME=/home/psadm2/psft/pt/8.52
    export ORACLE_BASE=/opt/oracle/psft/pt/oracle-client
    export ORACLE_HOME=$ORACLE_BASE/11.2.0.x
    export ORACLE_SID=HR91C323
    export TUXDIR=/opt/oracle/psft/pt/bea/tuxedo
    export LD_LIBRARY_PATH=$TUXDIR/lib:$LD_LIBRARY_PATH:$ORACLE_HOME/lib
    . /opt/oracle/psft/pt/tools/psconfig.sh
    export PATH=$TUXDIR/bin:$PATH:$ORACLE_HOME/bin:$PS_HOME/setup
    export LANG=C
    export COBDIR=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit
    export PATH=$PATH:$COBDIR/bin
    export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$COBDIR/lib(Just a note on the beauty of VirtualBox: I didn't figure out all the above in a single step. But by taking some snapshots of my virtual machine I was able to go back and start over with a minimum of fuss.)
    I still had a few errors after I got a clean run of /opt/oracle/psft/vm/oraclevm-template.sh:
    <li>The app engine VERSION program failed because it didn't pick up the PS_SERVER_CFG variable. The variable is set in the script so I'm still trying to figure out what happened.
    <li>The ovm_dbusers.sql failed on a couple of statements with insufficient privileges. It is run as SYSADM and may need to be run as sysdba.
    <li>The ovm_ib.sql script had a unique constraint error on an insert into psibsvcsetup. Since the row already exists this should probably be an update.
    These were minor issues that were easily resolved after the instance was up.
    I have started making changes to further reduce the footprint of the VM: lower weblogic min/max heap size to 128m, don't start PSAESRV in the batch server, don't start Analytic and Query servers in the app server, lower the sga_target and pga_aggregate_target in the db server, etc.
    These PeopleSoft OVM templates are a fantastic way to get started with an up-to-date, well configured PeopleSoft application.

    Hi,
    To keep all my peoplesoft servers on a virtual environnement i will use Oracle Database 11.1.0.6 for x86_64 (64 bit) with Oracle Enterprise Linux 5.2 template and install on it the peoplesoft CRM. it's a good idea ? Yes, why not.
    But you could also want to minimize the number of virtual machines running in your env by adding the CRM database into the existing Peoplesoft OVM database server, check if there is enough space to host this CRM db in addition of the running HR db, if not you could increase the space or add a new disk.
    and which files from http://edelivery.oracle.com i should use to install peoplesoft CRM database ?
    You'll only need to download PeopleSoft Enterprise Customer Relationship Management 9.1 application, part number V17881-01 from "PeopleSoft Enterprise - Customer Relationship Management 9.1 Media Pack".
    sorry for those question i'm still beginner in peoplesoft.No problem, Peoplesoft is not so easy software anyway.
    HTH,
    Nicolas.

  • Delivered languages in PeopleSoft HCM 9.1

    Is there a published list of the delivered languages in PeopleSoft HCM 9.1 on Oracle.com?

    If you go to My Oracle Support, Certification, Roadmap for 2010, you could see HCM 9.1 revision 1 delivered in edelivery is for the following languages :
    Brazilian Portuguese, Canadian French, Danish, Dutch, Finnish, French, German, Italian, Japanese, Korean, Polish, Russian, Simplified Chinese, Spanish, Swedish, Traditional Chinese
    Nicolas.

  • 2006 PeopleSoft HCM GPUG Annual Conference

    2006 PeopleSoft HCM GPUG Annual Conference
    May 31-June 2, 2006
    Marriott World Center
    Orlando, FL
    The PeopleSoft HCM Global Product Users Group (GPUG) conference is hosting this annual event specifically for multi-national organizations with operations in at least three countries, on two or more continents. The event provides a great opportunity to hear from other global customers and Oracle experts; to explore a wide variety of topics around global implementations, investments, and product roadmaps; and to share your product and support feedback with Oracle representatives. To register, please click here. Then do the following:
    * In the upper right hand corner, click on "RSVP For An Event."
    * Enter the event code: 4TN8YNXAZNM
    * Click on "Go."
    * Click on "Register."
    * The conference summary information will then display.

    Thierry,
    I am curious to know about Fusion. I heard that Oracle Reports and Forms will not be used from R12 onwards. Is it so ?
    And anything new that we need to improve ourselves against the Fusion Application ?
    Any interesting new features for HRMS in Fusion ?
    Regards
    Jhansi

  • PeopleSoft 8.53 Integration with Oracle SES

    Dear All,
    My System Details are : 
    Machine 1
    Hostname : host1
    Port : port1
    Application : PeopleSoft 8.53 + HCM 9.2 (DEMO) + Oracle 11g
    Default IB Node : PSFT_HR
    OS : Windows 7 (64 Bit)
    Machine 2
    Hostname : host2
    Port : port2
    Application :Oracle Secure Enterprise Search 11.1.2.2.0
    OS : Windows 2008 Server (64 Bit)
    Machine 3
    Hostname : host3
    Port : port3
    Application : PeopleSoft 8.53 + ELM 9.2 (DEMO) + Oracle 11g
    Default IB Node : PSFT_LM
    OS : Windows 7 (64 Bit)
    No Error was encountered while installation and systems started without any error.
    I was able to integrate PeopleSoft HCM with Oracle SES (with great help from my forum friends ).
    I was able to establish Global search in HCM 9.2.
    Now I have PeopleSoft ELM installed on host3. I need to integrate this to the same SES Server Installed on host2.
    In identity management setup on Oracle SES entry is given for host1(HCM).
    How can I achieve this. I know I need to establish Single-Signon between ELM and HCM but, I am not sure how.
    Kindly help.

    Thanks HakanBiroglu for the response.
    I went through the post. I am aware of these steps.
    But I need help on point 2.
    2.There should be single sign on setup between these DB's
    How to achieve this ?

  • Use of Application Integrator in Portal 7.01

    Hi Experts,
    I want to use Application Integrator in Portal System of version 7.01.
    My scenario is to integrate SAP Service Market Place URL specific to download SAP Notes to functional Users in their SAP Portal account.
    I know that by using SAP URL iView it is possible, but I want to use AppIntegrator instead of it.
    Thanks & Regards,
    Hanif

    Hi Hanif,
    Firstly,As per your requirement its possible to use application integrator instead of URL iview ,you can use the below link for further help.(Applciation Iview)
    1.http://help.sap.com/saphelp_nw70/helpdata/en/70/5a3842134bad04e10000000a1550b0/content.htm
    Secondly, the below link shows how to integrate the applciation fromportal to backend through app integrator:
    2.http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0cbc309-ff89-2a10-8bad-bcde4c152ecb?QuickLink=index&overridelayout=true
    Hope this helps you solve the issue !!!!
    Thanks &Regards
    Brahma Rao Cheruku

  • Peoplesoft HCM Interface with SAP?

    We planned to implement the SAP HR module, together with the SAP EAM, SAP SCM and SAP FI in a project that was supposed to Go-Live last year.
    The HR Dept was using Peoplesoft HCM previously.
    The project never went live and the project has now decided to implement SAP EAM, SCM and FI but retain Peoplesoft HCM in HR.
    On which modules in SAP would Peoplesoft HCM normally interface?
    Thanks in advance.

    Hi lina.
    chk these links
    http://www.oracle.com/applications/peoplesoft/hcm/ent/PeopleSoft%20or%20SAP_%20Choosing%20The%20Best%20HCM%20Suite.pdf
    http://www.oracle.com/applications/peoplesoft/hcm/ent/Weighing%20Your%20Options%20For%20HCM%20Executive%20Summary.pdf
    for hcm implementation u should interface with
    BNA (business needs analysis);
    BPR (business process review);
    GAP analysis (identify essential customizations and work arounds);
    Gathering and reworking client data for input into the system;
    Training of Super Users (sometimes end users also);
    JAD workshops with super users;
    Functional specs for customizations and reports;
    Setup of system;
    Testing system, any changes, customizations and reports;
    Creation of CRP (conference room pilot) to demonstrate system to client;
    HR project documentation;
    Responsible for sign off of HR documentation by client;
    Writing training manuals;
    Responsible for delivery of a working system to client requirements;
    Initial support after go live.
    thanks
    karthik
    reward me ifusefull

  • Project systems integration with portal (EP)

    Dear all,
    I have to integrate the projects systems module with Portal.(EP)
    In portal transactional I views can be used to create projects which can be store in the R/3.
    Now the issue is to create projects with out using Transactional I views. This should be a simple entry through portal, where in the user keys in the key fields and there by the project is created and scheduled.
    For this I have tried with using business packages given by SAP to integrate with portal.
    Now the issue is I can display the projects that are created in R/3 through portal and display the necessary fileds required for viewing (I views). Now the main problem is to create the project using these business packages so that the same get updated in the R/3.
    But business packages do not have the option of creating the project. I am using the business packages for projects 50.3.1
    Has any body come across this type of issue which has to be integrated with portal and subsequent creation of projects through portal
    If any body has done this in any other way please kindly share on this.
    Experts please throw some pointers on this.
    Regards.
    Vara Prasad

    Hi Aman,
    You may try creating transaction iViews of the desired PS Transaction.
    For more help you can take help of your Portal Administrator.
    Else, see if this link may help:
    http://help.sap.com/Business_Packages/EN/06/3ED93BE53BCD29E10000000A114084/frameset.htm
    Regards,
    Vivek Pandey

Maybe you are looking for