PeopleTools 8.43 and 8.49 can be on the same machine?

Hello Experts,
I have doubt about the following
1). Can i run two PeopleTools versions on the same machine? for example if i want to run PeopleTools 8.43 and HRMS8.8 and 8.49 & HRMS9.0 the same machine?
with two PS HOME's and 2 different databases (Database is on seperate machine)
please share your experience / idea's.
Thanks a lot.

Of course, you can have many PS_HOME within different Peopletools version on same machine.
However, on Windows workstation/server, you should be careful :
1. with the connectid (people) user and password, it is better if they are same on all your db if you want to avoid to change them through ConfigManager
2. with DataMover default folder, it can take the one from a previous run, regardless the version you were/are using, so it could point to an other PS_HOME than the one you want. Or set a full path directory to your INPUT/OUTPUT file, or change the windows registry (I'm doing it by cmd script)
Nicolas.

Similar Messages

  • Can i share music and photos between two users on the same machine?

    How can I share my music and photos between two users on the same machine?

    Thank you Joe - I tried this but it's only showing a teensy amount of music - the stuff on the second users account as opposed to the giagntic library on the 'main' account. I actually went to a Genius Bar and they said that apple doesn't really want you to share music between accounts - parents don't want to hear their kids music etc. Which seemed strange, but it might be the case sadly   Thanks anyway!

  • Can Veristand 2009 and Veristand 2010 be installed on the same machine?

    I have VS2009 running on my machine. I would like to install VS2010 as an eval to start porting an implementation over to VS2010 before I pull the plug on VS2009. Can these bothe be installed and functional side-by-side on the same machine? Are there any caveats to bouncing back and forth between the two? I already have the prereqs listed on the VS2010 eval page (NI-DAQmx 9.1.5, NI-RIO 3.5 and NI-XNET 1.1).
    Solved!
    Go to Solution.

    Hi,
    I have VS2009 and VS2010 installed in my Windows XP and I can work with them without any problem.
    I also tried to port my LV2009 programs to LV2010 but I got problems with VS2009 Off-line API VIs because LV2010 can not convert them. According to the error message, NI delivered the API VIs protected (without diagram).
    I believe that you could not have VS2009 and 2010 in the same RT target.
    Cheers.
    Cláudio H.
    CHCastro

  • ECC 6.0 and ECC 5.0 runing in the same Machine.

    Hi Guys,
    I have a challenge: Install a ECC 6.0 with HR and an ERP 5.0 on the same Machine and Operational System. Do you know some documentation, link or tips for this type of case? Do I need run something different than a normal installation?
    Best Regards,
    Jader Coelho.

    Hi,
    What OS are you going for....Windows / unix ?
    Just make sure you have enough Memory CPU  to facilitate both
    and have enouge disk for the paging file.
    Have you considered MCOD, and is there a reason why you want to run EEC6 and ECC5 why not just EEC6 for both.
    Multiple Components in One Database (MCOD) [original link is broken]
    Edited by: Mark Norman on Oct 16, 2009 5:22 PM

  • Can we have BusinessObjects 4.0 and 4.1 both installed on the same machine

    Can we have BusinessObjects 4.0 and 4.1 (tool Clients) both installed on the same machine? Why? Why not?

    4.0 and 4.1 are incremental upgrades hence both on the same machine are not possible.
    Though u can use 4.1 client tools to login to both 4.1 and 4.0 servers.
    3.1 and 4.0/4.1 together is very much possible on the other hand.

  • Running SUN JRE and Microsoft VM in InternetExplorer on the same machine

    Our product needs at least Java 1.3 to run.
    One of our customers needs to run old applets which for some reason I don't know need the microsoft VM.
    Is there a way to install/run both VMs on the same machine?
    Udo

    Can they be installed - yes.
    But your code will not run in the MS VM. And if their applets won't run in your VM that means there will be two VMs running as two separate processes. So the applets will not be interacting with your code directly.

  • Run DW CS4 and DW CS5.5 update on the same machine?

    Is it possible to run DW CS4 and DW CS 5.5 (as an update of the DW CS 4) on the same machine? Due to the fact that ADDT doesn't exist anymore and we still have some projects needed to be maintained on ADDT, DW CS 4 should still be usable on the same Mac.

    Yes, each upgrade installs into its own folder.
    Just don't try and run them at the same time.
    Many people keep half a dozen versions (upgrades of each other) on their hard drive since hard drives are so spacious these days.

  • Now I have a regular ipod and a shuffle can I use the same itunes account

    How do I start to set up my shuffle to work on the same itune account?
    Once I add my shuffle will it wipe out any / all songs?
    Thanks

    If the version of iTunes on your computer is newer than or the same version as the version available when the iPod shuffle came out, you can simply plug the second iPod into your computer and go through the iPod Setup Assistant. Adding a new iPod to your computer will not erase any songs from the iTunes library or other iPods associated with that computer.
    (20466)

  • CSM route mode and bridge mode can exist at the same time?

    I'm using CSM on ver 4.x,and I used to the bridge mode for firewall load balance,for a new requset,I have to create a new server/client vlan,but the original firewall load balance was effected when I issued the server vlan command,and I'd like to use route mode for the new server farm,I'm wondering that route mode and brige mode can't exist at the same time,because it seems it doesn't make sense.Any reply will be very appreciated.

    you can use bridge mode and route mode at the same time.
    Traffic with desintation mac address being the CSM will be routed, otherwise it will be bridged.
    Gilles.

  • How can I share ONE thunderbird profile between XP x64 and Windows 7 dual booting on the same machine?

    I have a primary XP profile and associated mailboxes/accounts. I am dual-booting to Windows 7 and want to share only that XP profile so that all of my mail appears (and is synchronized) in the Thunderbird browser regardless of which OS I boot to. This seems as simple as pointing the Win 7 mail account local profile to the original XP profile, but that doesn't work. And - please - don't point this question to the response regarding sharing profiles between windows and Linux. That thread hasn't helped. Thanks in advance

    Well I have no idea hat thread your talking about, but regardless the process is always the same, use the profile manager to create a new profile and point the profile manager to the profile you wish to use.
    see https://support.mozilla.org/en-US/kb/profiles-tb#w_restoring-a-profile-backup
    and
    http://kb.mozillazine.org/Moving_your_profile_folder_-_Thunderbird

  • I have a ZEN Micro and ZEN sleek, can I use the same softwa

    I currently have a zen micro and just purchased a zen sleek photo, will I have to reinstall the software using the NEW disk? Will I be able to use them both with the same software?

    Yes.

  • HT1420 if I deauthorize a computer to clear all 5 authorizations, can I reauthorize the same machine?

    I' getting ready to upgrade the components of this authorized computer. Somehow someway I've used all 5 of my authorizations. Probably multiple on this one alone since I beta test operating systems on it. Can I deauthorize all 5 and reauthorize only the one that are in current use without losing my purchases and whatnot?
    Thanks

    Yes. Back the content up anyway.
    You may be able to deauthorize your computer individually with the Deauthorize Computer function even if it doesn't think it's authorized.
    (82520)

  • Since downloading windows 10, I can no longer scan to my computer but can print to the same machine

    I recently instaalled windows 10.  I have an epson all in one printer/scanner.  I can print to the machine but can not scan to my computer now.  I deleted the machine and reloaded the drivers but it still does not work.  Help pls

    Hey ,
    Welcome to the HP forums. You may want to reach out to Epson for issues using their products. 
    Thanks.

  • Analyzer 7.2.1 and Reports 7.2.1 on the same machine

    Hi all,We have this environment on the reporting server:-     OS 2003 server SP1-     Analyzer 7.2.1, repository – Oracle 10g-     Reports 7.2.1, repository – Oracle 10g-     Web Server: Websphere Express 5.1On another server is installed Essbase 7.1.3.The installation of Analyzer and Reports was OK.I start using first Analyzer and I open an report … everything OK. All works fine.If I try to use Reports I receive this error: Native Library D:\Hyperion\common\ADM_A\7.2.1\Essbase\7.2.1\bin\HssJNIDriver721.dll already loaded in another classloader.If, instead, I start to use first Reports .. when I try to use Analyzer.. I receive the same error.Seems that Analyzer and Reports … does not work properly installed on the same server. There is a way to make them work together ?Thanks.

    We had Reports and Analyzer installed on the same 2003 server and they never played well together. If we had one open, and tried to open the other it bombed. We were on version 7.1 of Analyzer and not sure on Reports.

  • Facetime on iphone and a mac can i use the same apple id

    i have a mac and iphone 4. I can receive facetime on my phone (email address) but not the mac. so i tried to change the facetime settings on my phone so that i receive facetime by phone number but it wont change. Im led to believe it email address for mac comp and mobile number for iphone
    please please help im so hacked off trying to get them to work

    Using FaceTime
    http://support.apple.com/kb/ht4319

Maybe you are looking for