PeopleTools v8.48 with Oracle 10G support for SLES

Hi,
I would like to know if this combination: PeopleTools v8.48 + Oracle 10g is full supported on SUSE Linux Enterprise Server (9 or 10)? If so. Is it possible to have a screenshot or document to justify it?
Thanks in advance
Saludos from México

PeopleTools v8.48 + Oracle 10g is full supported on SUSE Linux Enterprise Server (9 or 10)?Yes, it is supported.
Connect to the peoplesoft website, then go to the following menu :
» Implement, Optimize, and Upgrade
» » Implementation Guide
» » » Supported Platforms
» » » » By Operating System (OS)
» » » » » SUSE Enterprise
» » » » » » Oracle 10.2.0.3.0 64-bit
» » » » » » » PT 8.48
» » » » » » » » DBMS Server only
You will see :
SUSE Enterprise 9 64-bit
SUSE Enterprise 9
Nicolas.

Similar Messages

Oracle 10G support for both Cyrillic and Western European Character Sets

Dear all,
Our DB currently supports western EU characters sets but we need to also support Russian Characters.
Is there a common character set for both? or some trick that does the job?
Thanks.
DB: Oracle 10G R2
OS: Linux
Current Char Set:
NLS_CHARACTERSET     WE8ISO8859P1
NLS_CALENDAR     GREGORIAN
NLS_NCHAR_CHARACTERSET     AL16UTF16

AL32UTF8 will always do the job.
CL8ISO8859P5
CL8MSWIN1251
could to the job according to http://download.oracle.com/docs/cd/B19306_01/server.102/b14225/applocaledata.htm#sthref1960.
Edited by: P. Forstmann on 9 août 2011 17:41

Oracle 10g support for TRU 64 4.0.f

Hi,
I need some information on, Can Oracle 10g be installed on TRU64 unix version 4.0.f.
If it does not support directly, is there a patch available etc..
Can somebody confirm.
Thanks,
Nagarajan Dandapani

Hi,
Oracle 10gR1 is certified for Tru64 UNIX 5.1b.
Certification of Oracle 10gR2 for Tru64 UNIX 5.1b.is planned for 1st quarter 2006.
If it does not support directly, is there a patch available etc..No idea, perhaps can you create an iTAR to post the question.
But if you read the metalink note 283751.1 Pre-Install checks for 10gR1 RDBMS (10.1.x) - Tru64 Platforms, you can see that no workaround provide...
Nicolas.
Message was edited by:
N. Gasparotto
Adding metalink note reference.

Oracle 10g support for EM64T and Windows 64-bit

Is there support for this configuration either in a patch release for 10g or is it planned for the near future?

Hi,
Oracle 10gR1 is certified for Tru64 UNIX 5.1b.
Certification of Oracle 10gR2 for Tru64 UNIX 5.1b.is planned for 1st quarter 2006.
If it does not support directly, is there a patch available etc..No idea, perhaps can you create an iTAR to post the question.
But if you read the metalink note 283751.1 Pre-Install checks for 10gR1 RDBMS (10.1.x) - Tru64 Platforms, you can see that no workaround provide...
Nicolas.
Message was edited by:
N. Gasparotto
Adding metalink note reference.

SAP R/3 4.7 EXt200 installation on RedHat Linux 5.2 with Oracle 10G

Hi,
I got this error during Database Instance Installation:
All file system node operations of table tORA_SapdataNodes processed successfully.
ERROR      2009-08-31 11:04:39 [iaxxinscbk.cpp:289]
           abortInstallation
MDB-06020 File not found: [no oracle rdbms file found].
I am done with CI Installation.
Any help would be appreciated.

Hi ,
     First of all please check availability of your OS + DB requiremnts whether it is supported by SAP or not.You can check this at Product Availability Matrix at ::
http://service.sap.com/pam
     If this support for your environment i.e.RedHat Linux 5.2 with Oracle 10G then be informed that after starting sapinst in step create database it will prompt you for installing your oracle DB. So open a new window & install your databse ,do the patching of your DB & then continue with sapinst after successfull installation of oracle.Rest of details sapinst will prompot you during instal;lation.
    Hope this will guide you for your query.
Thanks..
Mohit

Is TimesTen 11.2.1 compatible with Oracle 10g (Oracle 10.2.0.5.0)?

Is TimesTen 11.2.1 compatible with Oracle 10g （Oracle 10.2.0.5.0）？

Yes it is. Following version are supported for TT 11.2.1.8.x releases
■ Oracle 11g Release 2
■ Oracle 11g Release 1
■ Oracle 10g Release 2 (10.2.0.4.0 or above)

SunOneAppServ with Oracle 10g vers. 10.1.0.3.0

Hello,
I'm using two different versions of SunOneAppServer,
Sun Java System Application Server Enterprise Edition 8.1_02(build b19-p08) and
Sun Java System Application Server 7 2004Q2UR2.
These two instances of Application Servers work over two different databases, Oracle 8 and Oracle 10g vers. 10.1.0.3.0.
When working with Oracle 10 I get locks over some records during transactions and that transactions don't run correctly so the records remain locked and all following transactions go on waiting indefinitely or until I kill the session using toad.
Looking at the query locking the record it seems to me it's a query done by the application server.
Using the same software and making the same operation over the database with Oracle 8 this doesn't happen.
Does anyone has the same problem or knows how to solve it?
A collegue of mines told me that these versions of application servers doesn't support Oracle 10g. Is it true?

Both versions of the appserver below will work with Oracle 10g.
There is not enough details as to asist with your problem, but it could well be a change in semantics for locking in 10g that is causing your issue

Error: SAP installation of ERP Sr3 with ORACLE 10g on Windows 2008 server

Dear all,
while installaing SAP ERP SR3 with ORACLE 10g on windows 2008 server...
we are getting error as not support.
please confirm wether this version of OS is uspported or not.
thanking you in all,
by
Animesh

actualy we tried to change Oraparam.ini file in the installation folder...
edited ... windows= 5.0, 5.1, 6.0
we had entered 6.0
Yes - that is necessary.
and started ... but after starting we are getting ERROR like unKNOWN and installation popup (OUI popup) exiting with .. error popup.
Yes - because Oracle delivers its own Java version - which is too old to run on Windows 2008.
if you suggest us to use 2003 64 bit for temporaray .... purpose.
and is there any specified procedure to UPgrade OS.
like... DB should be updated before OS upgradation.
You can run 10.2.0.4 on Windows 2003 x64 nicely and upgrade to Windows 2008. Since there is no "upgrade" (it is the highest version supported) there´s no need to do anything.
The question you have to ask is:
Why do you need Windows 2008? Is there any technical implication?
Markus

2 nodes RAC with Oracle 10g on Windows 2000 server

Hi at all. I want to manage a cluster having 2 nodes on windows 2000 server each of them with Oracle 10g. I have VMWare 5.0. Someone can suggest me a detailed tutorial how to start and built it? Thank you very much for your answers.
Saverio Sergio Mola

the cookbooks here:
http://www.oracle.com/technology/tech/linux/vmware/cookbook/index.html
will explain how to install.. however the VMware Workstation product doesn't offer in a supportedway the sharing of two nodes of disks.. there are hacks out there, but they are not very stable. We therefor chose to install two instances on one node to showcase RAC, rather than make it complicated and unstable to use and showcase.
there are also ready made VM's from above page, so u can quickly evaluate it for both Red HAt and SuSE.. when vmware can support such sharing in an easy supported way we might re-evaluate.. until then my personal suggestion is to stick to simple case.. 2 instances on one node.. its easier to copy, snapshot.. etc.
Enjoy..
Saar.

Does OracleAS 10g support business objects

How can I integrate Business Objects(BO) with OracleAS 10g Portal is there some built in portlet or plug in for this... and where can I find documentation for this...
Do you actually need to have a business objects license for each user to be able to run something through the Portal that was created in BO?

Not yet but look for new supported platforms docs when SP3 is released (Mayish). I still think windows 7 will work fine IMO but if you are looking for official testing/support then SP3 should have it.
Regards,
Tim

Oracle 9iAS Support for WebUtil

Oracle 9iAS Support for WebUtil
With the official release of WebUtil soon approaching on 10g will this mean that WebUtil will be supported on a 9i achitecture as well?
I have successfully installed the beta version of webutil in a development environment and have been very impressed by its ease of use and functionality. However my bosses are concerened about deploying a beta release on our live 9iAS R2 setup until it is confirmed that Support will be available.
When will WebUtil be officialy released on 10g?
Will Oracle offer support for those using WebUtil on 9i?
Many thanks

Tim,
I'd like to give Grant the final word on this because he is more involved, but to my understanding and current information, WebUtil will be supported with Oracle Application Server 10g only.
Forms 9i and Forms 10g are not that different in that there is no real migration work needed. For this reason we plan to support Forms10g and Application Server 10g.
The release of WebUtil - again Grant will know better - should be anytime now.
Frank

ADF 10g support for Internet Explorer 8

hi
Working with Oracle support (in SR 7732252.994) we first reached this conclusion ...
"Microsoft Internet Explorer 8 is not a supported for the ADF Faces applications built using JDeveloper 10.1.3.5.0"
When I subsequently asked ...
"Will there be a JDeveloper 10g release (post 10.1.3.5.0) that will support IE8 ?"
... the answer was ...
"Jdeveloper 10.1.3.5 is the last release in the Jdeveloper 10g branch and there will be no more releases after 10.1.3.5.
Therefore, there will be no support for IE 8 in the Jdeveloper 10g branch."
question
(q1)What is supposed to happen to ADF 10g production applications deployed in an environment that allows little control over the browser that is used (extranet/internet)?
many thanks
Jan Vervecken

Thanks for your reply Shay.
We plan to officially support IE8 with the next patch release to JDeveloper 11g - currently planned for later this year.That matches what I wrote in my initial post in this forum thread about IE8 support.
We usually only certify browsers after they officially go production.That does not really answer my question (q1) in this forum thread.
It is more like, how can I assess that Oracle will support any successor(s) of IE8 or successor(s) of any currently supported browsers for ADF 11g applications in the future? How long will Oracle support "commonly used browsers" for an ADF 11g application I build today, so how long will I be able to use that application?
How do I answer such questions for ADF 11g applications that should be deployed on the internet (where, as some extranet environments, you typically have not that much (or no) control over which browsers your users use ... although some would like to argue with that, see forum thread "ADF Faces RC browser support and browser market share")?
(By the way, do you have any feedback for the forum thread "ADF 10g support for Internet Explorer 8"?)
regards
Jan

Can't compile PHP5.2 with Oracle ORA support, please help!

Hi peoples,
first post on here - hope someone can assist.
I am compiling PHP 5.2 on RedHat Enterprise 4 AS intel 64bit with oracle ORA and LDAP support compiled in. I am using Apache 2.0.52-28 installed from RedHat RPMs.
I am using the following configure line:
./configure with-apxs2=/usr/sbin/apxs with-config-file-path=/etc/httpd/conf with-oracle=/export/oracle/pegasus/product/9.2.0 with-ldap=/usr enable-sigchild enable-libgcc
The only oracle related messages I have found during the configuration are:
checking for Oracle (OCI8) support... no
checking Oracle OCI support for PDO... no
However I am told these are newer methods of Oracle communication protocols and not related to what I am trying to achieve.
After building and installing PHP 5.2, reconfiguring apache httpd.conf and restarting httpd I find that the output of phpinfo.php shows no mention of oracle whatsoever apart from the Configure Command section at the beginning confirming that yes, --with-oracle= was specified.
I have tried setting ORACLE_HOME=/export/oracle/pegasus/product/9.2.0 environment variable before running ./configure but to no avail.
I have also tried adding various Oracle environment variables to my startup scripts for Apache, also to no avail.
Any ideas? I am really under the pump to get this sorted as it is for a new production server here and I am limited timewise to get it up and running.
Cheers
Andy

Hi Andy,
I have php 5.2 installed on a RH 64 bits so our configurations are almost the same (I use Apache 1.3 and Oracle 10g).
I compiled 5.2 from source succesfully with this instruction:
./configure with-config-file-path=/opt/apache with-libdir=lib64 with-oci8=/opt/oracle/orase/oracle/product/10.2.0/db_1 with-apxs=/opt/apache/bin/apxs --enable-sigchildReplace the required values to match your system and try to see if it works for you.
Let me know how it goes. Any additional problem, I'm glad to help.

Initial Login Problems with Oracle 10g Express

Hi,
Can anybody help, im a student trying to use oracle 10g Express for a project, my problem is the express will not allow me to login as an administrator from the word go. I'm using the right user name and password and every time I login the page just refreshes itself with no other prompts. If i type the wrong credentials i get a message saying so and if using the Hr user name and password it says its locked as it should. Ive used the sql prompt to login and this works so i no the password and user name are correct, but id like to use the GUI if i could. Ive unistalled and reinstalled twice still no joy. Any suggestions?

Hey again, thanks for your replies, Yes i have been using SYSTEM and SYS with a password of oracle in the GUI interface. When i use the SQL prompt i use the following to login:
SQL> conn system/oracle
connected.
SQL> Show User
USER is "SYSTEM"
This says to me that i have logged into the database but still i have no luck in doing the same through the GUI interface using the same credentials.

Sqlj runtime error with oracle 10G in Websphere6 or 5.1

We are trying to migrate from oracle 9i to 10G and we are compiled all our sqlj code with codegen = -oracle option.(previously we used to use codegen=-jdbc which for some reason doesnot work).it compiles fine with out any erros.. But when we try to run then get this exception.
java.lang.IllegalArgumentException: SQLJ programs translated with the option -codegen=oracle must be run under Oracle JDBC 9.0.0 or higher. If the Oracle JDBC driver is wrapped, then the wrapper must implement all of the oracle.jdbc.OracleXxxx interfaces. Alternatively, you can translate SQLJ programs either with -codegen=iso. java.lang.IllegalArgumentException: SQLJ programs translated with the option -codegen=oracle must be run under Oracle JDBC 9.0.0 or higher. If the Oracle JDBC driver is wrapped, then the wrapper must implement all of the oracle.jdbc.OracleXxxx interfaces. Alternatively, you can translate SQLJ programs either with -codegen=iso.
at sqlj.runtime.ref.ConnectionContextImpl.getOracleConnection(ConnectionContextImpl.java:167)
at sqlj.runtime.ExecutionContext$OracleContext.prepareOracleStatement(ExecutionContext.java:1397)
We are using ojdbc14.jar that came with oracle 10G.
Hope any one can give any pointers.

I'm having same issue - but I'm having it when I try to invoke a method that contains a database Object type from a Tibco Business Works Process called a Java Method.
How exactly do you do the codegen=iso configuration?
I've tried:
1. Project Properties / Compiler SQLJ and then select from Code Generation drop down iso.
2. From Connections / Database / Navigate to package / right-click / Generate Java / Browse to my custom jpub.properties file where I have tried multiple entries such as (by themselves and in some combination.:
- jpub.codegen=jdbc
- jpub.codegen=iso
- jpub.compatible=9i
- jpub.compatible=8i
- compatible=both8i
- jpub.usertypes=oracle
- jpub.compatible=customdatum
- jpub.compatible=sqlj
I've also played with changing from the default some of the Mapping Options in Connections / Database / Navigate to package / right-click / Generate Java / Mapping Options.
This doc here, says that code should change (section 6 JPublisher Input Files - based on configuration of Input files)
Oracle® Database
JPublisher User's Guide
10g Release 2 (10.2)
B14188-01
No matter what I do, the code that gets generate is the same.
Also, the documentation talks about running things from the command line but how exactly do you do that? Do I need to be in specific directory? I tried the c:\ C:\jdev\system and c\jdev\ and c:jdev\bin and always get error message: 'jpub' is not recognized as an internal or external command, operable program or batch file.
I've built a java client in JDeveloper to successfully call the same method and I don't see the error.
Edited by: disaak on Mar 9, 2010 11:51 AM

PeopleTools v8.48 with Oracle 10G support for SLES

Similar Messages

Maybe you are looking for