Per-user Views when Using VMS

Hi
I was wondering if anyone knows of a way to provide per-user views within the Firewall MC. I have a large number of PIXs at different sites and I would like each administer at each site to only see their firewall when they log into VMS.
Any suggestions / links would be appreciated.

I did not find any such options in the feature guide,
http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/mgt_pix/fwmc134/index.htm

Similar Messages

Issue with complete refresh on materialized view when using rownum

Hi all,
I had an issue with rownum when using complete refresh
I am using rownum when creating materialized view and it is generation correctly.But the issue was when i am refreshing the same ,rownum was not getting sorted in ascending order.
anyone had come across this scenario

rownum is determined as the row is output, so "order by rownum" does literally nothing.
http://docs.oracle.com/cd/B19306_01/server.102/b14200/pseudocolumns009.htm

Outlook conversation view when using Send on Behalf of Accounts

Ok, so here's what I'm working with:
Have a group of users that were recently setup with a generic mailbox using "Sent on Behalf of" permissions. They can all view the account in Outlook (2010) fine and can send messages fine from it as well. We made the registry change on all machines
that causes mail they send from that account to appear in the "Sent Items" folder of the generic account instead of their own and that is working well. The only issue is that when attempting to use conversation views they will not work (you replied
to this message, you forwarded this message, etc.) now. As a test, I moved a few items from the Sent Items folder in the generic account over into the Sent Items folder of one of the users own Outlook accounts and the conversation views then works correctly
for those messages.
So basically, it appears as if the registry key change worked for changing where the sent mail from this account goes to, but Outlook doesn't realize that's where they are so conversation views won't work. Anybody have any ideas on this?

Hi,
I can reproduce this behavior in my environment. Outlook can organize
Inbox and other mail folders in conversation view, but Outlook can't organize emails in other mailboxes within one conversation thread.
When we set the registry to have Outlook save email in the "Sent Items" folder of the generic account, the sent mails are not in their own mailboxes. So in theory, it's the default and proper behavior of Outlook.
Something you may want to know about Conversation group:
http://www.slipstick.com/outlook/outlook-2010/conversation-groups/
Regards,
Steve Fan
TechNet Community Support

Page designer show small view when using page template and cannot be run

Dear Experts,
I need to make some page templates.
I have build 2 simple page templates, let say template0 & template1 which template1 using template0.
It show no any problem until I close my Jdeveloper & reopen it.
When I reopen template1, it show so small in designer (Jdeveloper window).
Is there any wrong?
I have build another template, just 1 template.
When I used it at the first time, no any strange behavior occur.
After ... (I don't exactly when), it give me the same view in my designer.
Then I force to use my first tempate (template1 which used template0 inside), I cannot run my application at all.
After wait several minutes, I found error log in my log messages.
*#### Server Instance DefaultServer could not be started: Server Instance was terminated.*
Above the message, I found another error messages:
*Jun 7, 2009 5:40:19 PM ComponentMetadataHandler _error*
WARNING: error parsing component tag in file: null/tag:xmlContent/id:dte_160d74a
org.xml.sax.SAXParseException: <Line 69, Column 7>: XML-20100: (Fatal Error) Expected 'EOF'.
* at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:422)*
Is there anyone that can help me to find out why this error occured?
Should I raise this problem to metalink or just can post it in this forum?
Many thanks for your supporting...
N.B: Below I attach my template0 (AHM000.jspx) and template1 (AHM001.jspx)
Best regards,
Dominic Chandra
AHM000.jspx
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns:c="http://java.sun.com/jsp/jstl/core">
<c:set var="ahmwebtemplateBundleAHM000"
value="#{adfBundle['com.ahm.lib.view.template.AHMWebTemplateBundle']}"/>
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<af:pageTemplateDef var="attrs">
<af:panelSplitter orientation="vertical" splitterPosition="60">
<f:facet name="first">
<af:decorativeBox theme="dark" topHeight="0px">
<f:facet name="center">
<af:panelHeader text="#{attrs.pageTitle}">
<f:facet name="context"/>
<f:facet name="menuBar"/>
<f:facet name="toolbar"/>
<f:facet name="legend">
<af:panelGroupLayout>
<af:outputText value="#{attrs.pageName}"/>
<af:outputText value="#{sessionScope.userState.userName}"/>
<f:facet name="separator">
<af:spacer width="10" height="10"/>
</f:facet>
</af:panelGroupLayout>
</f:facet>
<f:facet name="info">
<af:statusIndicator/>
</f:facet>
</af:panelHeader>
</f:facet>
<f:facet name="top"/>
</af:decorativeBox>
</f:facet>
<f:facet name="second">
<af:panelSplitter orientation="vertical" positionedFromEnd="true"
splitterPosition="20">
<f:facet name="first">
<af:decorativeBox theme="light" topHeight="0px">
<f:facet name="center">
<af:facetRef facetName="mainArea"/>
</f:facet>
<f:facet name="top"/>
</af:decorativeBox>
</f:facet>
<f:facet name="second">
<af:panelGroupLayout inlineStyle="text-align:right;">
<af:outputText value="#{ahmwebtemplateBundleAHM000.VERSION} #{attrs.appVersion}"
inlineStyle="color:Navy;"/>
<af:outputText value="© 2009 PT Astra Honda Motor"
inlineStyle="color:Navy; font-weight:bold;"/>
<f:facet name="separator">
<af:spacer width="10" height="10"/>
</f:facet>
</af:panelGroupLayout>
</f:facet>
</af:panelSplitter>
</f:facet>
</af:panelSplitter>
<af:xmlContent>
<component xmlns="http://xmlns.oracle.com/adf/faces/rich/component">
<display-name>AHM000</display-name>
<facet>
<description>Main Area</description>
<facet-name>mainArea</facet-name>
</facet>
<attribute>
<attribute-name>pageTitle</attribute-name>
<attribute-class>java.lang.String</attribute-class>
<default-value>Page Title</default-value>
<required>true</required>
</attribute>
<attribute>
<attribute-name>
pageName
</attribute-name>
<attribute-class>
java.lang.String
</attribute-class>
<default-value>
ahmxxyyynnnznn
</default-value>
<required>
true
</required>
</attribute>
<attribute>
<attribute-name>
appVersion
</attribute-name>
<attribute-class>
java.lang.String
</attribute-class>
<default-value>
1.0.0
</default-value>
</attribute>
</component>
</af:xmlContent>
</af:pageTemplateDef>
</jsp:root>
AHM001.jspx
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns:c="http://java.sun.com/jsp/jstl/core">
<c:set var="ahmwebtemplateBundleAHM001"
value="#{adfBundle['com.ahm.lib.view.template.AHMWebTemplateBundle']}"/>
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<af:pageTemplateDef var="attrs">
<af:pageTemplate viewId="/template/AHM000.jspx">
<f:facet name="mainArea">
<af:panelSplitter splitterPosition="#{attrs.searchAreaPosition}">
<f:facet name="first">
<af:facetRef facetName="searchArea"/>
</f:facet>
<f:facet name="second">
<af:panelSplitter positionedFromEnd="true"
splitterPosition="#{attrs.infoAreaPosition}">
<f:facet name="first">
<af:facetRef facetName="mainArea"/>
</f:facet>
<f:facet name="second">
<af:facetRef facetName="infoArea"/>
</f:facet>
</af:panelSplitter>
</f:facet>
</af:panelSplitter>
</f:facet>
<f:attribute name="pageTitle"
value="#{attrs.pageTitle}"/>
<f:attribute name="pageName" value="#{attrs.pageName}"/>
<f:attribute name="appVersion" value="#{attrs.appVersion}"/>
</af:pageTemplate>
<af:xmlContent>
<component xmlns="http://xmlns.oracle.com/adf/faces/rich/component">
<display-name>AHM001</display-name>
<facet>
<description>Search Area</description>
<facet-name>searchArea</facet-name>
</facet>
<facet>
<description>Main Area</description>
<facet-name>mainArea</facet-name>
</facet>
<facet>
<description>Info Area</description>
<facet-name>infoArea</facet-name>
</facet>
<attribute>
<attribute-name>pageTitle</attribute-name>
<attribute-class>java.lang.String</attribute-class>
<default-value>Page Title</default-value>
<required>true</required>
</attribute>
<attribute>
<attribute-name>
pageName
</attribute-name>
<attribute-class>
java.lang.String
</attribute-class>
<default-value>
ahmxxyyynnnznn
</default-value>
<required>
true
</required>
</attribute>
<attribute>
<attribute-name>
appVersion
</attribute-name>
<attribute-class>
java.lang.String
</attribute-class>
<default-value>
1.0.0
</default-value>
</attribute>
<attribute>
<attribute-name>
searchAreaPosition
</attribute-name>
<attribute-class>
java.lang.Integer
</attribute-class>
<default-value>
200
</default-value>
</attribute>
<attribute>
<attribute-name>
infoAreaPosition
</attribute-name>
<attribute-class>
java.lang.Integer
</attribute-class>
<default-value>
200
</default-value>
</attribute>
</component>
<af:decorativeBox>
<f:facet name="center"/>
<f:facet name="top"/>
</af:decorativeBox>
</af:xmlContent>
</af:pageTemplateDef>
</jsp:root>

Hi...
Thanks for asking....
As I put in my post before, I include template0 in my template1, as seen in template1 (AHM001):
<af:pageTemplateDef var="attrs">
*<af:pageTemplate viewId="/template/AHM000.jspx">*
I use AHM000 inside AHM001. I use this approach to build many template based on one basic design.
Actually, I don't think the problem is in page template usage because as I submitted paralel to Metalink, I've already not called template0 in template1 but I copy template0's contents to template1.
Unfortunately, page designer show small view and below error messages still occured.
*Jun 7, 2009 10:25:20 PM ComponentMetadataHandler _error*
WARNING: error parsing component tag in file: /AhmTestTemplate-ViewController1-context-root/template/AHM001.jspx/tag:xmlContent/id:null
org.xml.sax.SAXParseException: <Line 115, Column 51>: XML-20100: (Fatal Error) Expected 'EOF'.
Fortunately my application can be run already altough the error message still logged.
Many thanks,
Dominic C.

How to see Design View when using ?php require("header.htm"); ?

Hello
I'm new to DW CS4 and have what's probably a simple question, but I can't figure it out. I have a basic html website in which I'm using php require to call header.htm and footer.htm files. In CS4, when I open any page in the Design or Split view, it displays the header.htm file. The only way I have been able to view the content of the page is to delete the php require code in Code View. I then edit the page after which I have to paste the require code for the header.htm file back in before saving.
Is there an easy fix for this?
Many Thanks!

Thanks for your response. All of my pages are php pages in which I use the php require command to display a header and footer. In CS4, when I open any page from my site in Design or Split view, all I can see is the header.htm file. I cannot see any of the content from that particular page. I have to go into code view and delete the <?php require("header.htm"); ?> from the code. The I can view and edit that page's content after which I have to paste the <?php require("header.htm"); ?> command back in and load the saved file to the server. A royal pain in the butt.

Is it possible to set default column widths in list view when using a finder window in Mavericks?

The default 'document' column is way too wide and forces you eye to track all the way across the screen to read info like "date modified', 'kind' or 'size'.
Tried several times to create a narrower default 'document name' column with no results. Couldn't find anything in preferences or view options. Tried dragging column headers while holding the down the option key with no results.
Every time I open a new finder window, all columns except the 'document' column affixed to the right side of the window. Also, when you grab the bottom right corner of a window to resize smaller, the lists become re-affixed to the right side of the window when opening the window back up.
Experiencing the same problem in Mavericks 10.9.3 on an iMac and Macbook Pro Retina.
Thanks if you've made it this far:)

This was a great place for me to start
Thank you
I took profdant139's suggestions a bit further as my real goal was to have the "Document column" narrower. The goal to be able to see all the other document info that was usually hidden way out to the right
To achieve my results I right clicked in the upper bar with the column names and chose from the drop down box "comments" column (as suggested). I then dragged it to the far right. This pushed all the other columns over.
In the end of the day I ended up adding "Size" and "Date modified" columns as well to get my desired results.
Remember one can move different columns around to be in the order you need by clicking on the column to get it active and then left click and drag it to where you want
Another great thing is that by default (Using Mavericks) the date modified, opened,created columns have date and time. One can shrink them down to xx/xx/xx format by manually adjusting the column width like one does in Excel - click on column separator up top and drag
Once all that is done, at least on my box, I closed it out and opened up a new finder window and everything was as I wanted.
Thank you for the help from the above helper to get me here

How do i Restore Preview as my default viewer when using Safari,seems adobe has hi jacked Safari,if i uninstall adobe safari will not open any pdf files.

How do i restore Preview as my default viewer.
Seems adobe has hi-jacked Safari and and opens using abobe not preview.
Have uninstalled adobe but safari then will not display any pdf files.
Preview still works fine to view existing downloaded files.

Niac --
What kind of files? PDFs? or Others as well?
If you want Preview to open all PDFs, then find a PDF on your HD.
Highlight it, and then press the Apple/Comand key along with th letter " i " key.
When the window comes up, look down to the "Open with" line, and change it from Adobe to Preview.
Then look slightly below, and select "Change All."
Now, all PDFs should open with Preview.

Problems displaying CR Viewer when using VS2010

When I try to display a form containing reference to a CR Viewer I get the following error message:
*An error occurred creating the form. See Exception.InnerException for details. The error is: The type initializer for 'CrystalDecisions.Shared.SharedUtils' threw an exception.*
Other info: Win7 Pro 64 is operating system. Installed Beta 2 of CR last August and was able to upgrade old CR (Ver 8.5) reports and to display reports albeit by a rather convoluted process. I created a seperate form for each report, added the viewer, showed the form which then displayed the report. To display form showing report the code line = "frm_cr_rpt01.show"
RECENTLY installed CR13 and this is when the problems started. I can no longer call up the previously running 'report' forms as I get the same error as above. I have tried adding the CR viewer directly to the 'calling' form and displaying the report with code line= "me.cr_rpt01.printreport" (similar to the process used in VB6) and get the same error.
I can open the CRreport.rpt in solution explorer and data and all report formatting displays just fine.
Suggestions anyone?

Moved to .NET SDK forum
Make sure all your references are version 13 now, clean up your app.config file. Search this forum on how to "clean up" your PC if it's the same as the beta PC and then reinstall.
Make sure you are using the 4.0 frame and not the client version.
Thank you
Don

Why must I set the AD as "default user store " when use Kerberos scheme ???

Hi ,
I am using kerberos scheme to authenticate user by OAM after user logged into the AD domain . It works well when there is only 1 AD domain ,for I can set that AD as the default identity store so that OAM can find user from the store and set the header .
But when there are two totally different AD domains with different users , there will be a question. That is , I can only set one AD domain as the default identity store. So when I use the other AD domain to visit webgate protected resource, OAM notice me the the user/password error. But if the AD user exist in both AD domains, it will be OK, because the user mapping is finished correctly.
logs here:
[2011-07-26T22:19:18.599+08:00] [oam_server1] [ERROR] [OAMSSA-20040] [oracle.oam.user.identity.provider] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: cbefca7cded5e992:3fca7bfd:131657b3817:-8000-0000000000000c19,0] [APP: oam_server] Could not modify user attribute for user : sAMAccountName, attribute : smicer, value : {2} .
[2011-07-26T22:19:18.600+08:00] [oam_server1] [ERROR] [] [oracle.oam.engine.authn] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: cbefca7cded5e992:3fca7bfd:131657b3817:-8000-0000000000000c19,0] [APP: oam_server] Failure getting users by attribute : sAMAccountName, value : smicer.[[
oracle.security.am.engines.common.identity.provider.exceptions.IdentityProviderException: OAMSSA-20016: Failure getting users by attribute : sAMAccountName, value : smicer.
     at oracle.security.am.engines.common.identity.provider.impl.UserProviderImpl.getUsersByAttribute(UserProviderImpl.java:342)
     at oracle.security.am.engines.common.identity.provider.impl.IdentityProviderImpl.getUsersByAttribute(IdentityProviderImpl.java:656)
     at oracle.security.am.engines.common.identity.provider.impl.OracleUserIdentityProvider.getUsersByAttribute(OracleUserIdentityProvider.java:288)
     at oracle.security.am.engine.authn.internal.executor.KerberosModuleExecutor.execute(KerberosModuleExecutor.java:254)
     at oracle.security.am.engine.authn.internal.executor.AuthenticationSchemeExecutor.execute(AuthenticationSchemeExecutor.java:94)
     at oracle.security.am.engine.authn.internal.controller.AuthenticationEngineControllerImpl.validateUser(AuthenticationEngineControllerImpl.java:261)
     at oracle.security.am.engines.enginecontroller.AuthnEngineController.authenticateUser(AuthnEngineController.java:669)
     at oracle.security.am.engines.enginecontroller.AuthnEngineController.processEvent(AuthnEngineController.java:294)
     at oracle.security.am.controller.MasterController.processEvent(MasterController.java:354)
     at oracle.security.am.controller.MasterController.processRequest(MasterController.java:517)
     at oracle.security.am.controller.MasterController.process(MasterController.java:457)
     at oracle.security.am.pbl.PBLFlowManager.delegateToMasterController(PBLFlowManager.java:209)
     at oracle.security.am.pbl.PBLFlowManager.handleBaseEvent(PBLFlowManager.java:147)
     at oracle.security.am.pbl.PBLFlowManager.processRequest(PBLFlowManager.java:107)
     at oracle.security.am.pbl.transport.http.AMServlet.handleRequest(AMServlet.java:168)
     at oracle.security.am.pbl.transport.http.AMServlet.doPost(AMServlet.java:133)
     at oracle.security.am.pbl.transport.http.AMServlet.doGet(AMServlet.java:673)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:523)
     at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:253)
     at oracle.security.am.pbl.transport.http.CredCollectServlet.getCredentials(CredCollectServlet.java:148)
     at oracle.security.am.pbl.transport.http.CredCollectServlet.doPost(CredCollectServlet.java:84)
     at oracle.security.am.pbl.transport.http.CredCollectServlet.doGet(CredCollectServlet.java:71)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.am.agent.wls.filters.OAMServletAuthenticationFilter.doFilter(OAMServletAuthenticationFilter.java:265)
     at oracle.security.am.agent.wls.filters.OAMValidationSystemFilter.doFilter(OAMValidationSystemFilter.java:133)
     at oracle.security.wls.oamagent.OAMAgentWrapperFilter.doFilter(OAMAgentWrapperFilter.java:120)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: oracle.security.idm.ObjectNotFoundException: No User found matching the criteria
     at oracle.security.idm.providers.stdldap.util.DirectSearchResponse.initSearch(DirectSearchResponse.java:174)
     at oracle.security.idm.providers.stdldap.util.NonPagedSearchResponse.<init>(NonPagedSearchResponse.java:52)
     at oracle.security.idm.providers.stdldap.util.NonPagedSearchResponse.<init>(NonPagedSearchResponse.java:43)
     at oracle.security.idm.providers.stdldap.util.LDAPRealm.searchUsers(LDAPRealm.java:489)
     at oracle.security.idm.providers.stdldap.LDIdentityStore.search(LDIdentityStore.java:274)
     at oracle.security.idm.providers.stdldap.LDIdentityStore.searchUsers(LDIdentityStore.java:367)
     at oracle.security.am.engines.common.identity.provider.impl.UserProviderImpl.getUsersByAttribute(UserProviderImpl.java:314)
     ... 57 more
It seems OAM must set the AD as "default user store " , and only if so , AD domain users can login to webgate protected resources by kerberos .
So, how can I make 2 AD available together ? Can you kindly give some advice? It will be very appreciated.
Thanks !!

1) Should my setup be defaulting to 32-bit compilersYes. On Solaris compilers generate 32-bit code by default
2) I have read that adding -m64 to the compile command will make it 64-bit, is this accurate?It will make compiler produce 64-bit binaries.
Compiler itself will stay 32-bit ;-)
3) Is there a way to set the compilers to default to 64-bit so that the user doesn't have to specify -m64?No. At least no compiler-specific way. Only UNIX general tricks (shell alias, shell script etc)
4) Does everyone just use -m64 and forget about it?Yep. They have no choice

Why does Browse All Versions black out TimeMachine view when using Pages '09 in Mavericks?

I have just upgraded from Mountain Lion to Mavericks.
When I click File>Revert>Browse All Versions... for a Pages '09 document in Mavericks, the TimeMachine view just begins to emerge, but then suddenly the screen goes completely black. The only way I can recover (besides restarting) is to click on my second monitor. Then the typical TimeMachine view appears for a fraction of a second as it's exiting back to the current document view. I never get to see the previous versions, let alone work with them.
I can't find anyone in the community with a similar problem.
Also, I definitely do not want to upgrade to the new Pages, which is missing many of the features I use a lot.
How can I get the Browse All Versions view of a Pages '09 document to stay visible in Mavericks?
Note: I just discovered that I could solve this problem by disconnecting my second monitor, or by making it mirror my main monitor. Having multiple monitors seems to be interfering with the "Browse All Versions" function.

Yeah, all the more furstrating when you see that osx is less polished than before and Apple take so much time to fix "simple" stuffs... (i.e: particularly no love for dual displays, lot of annoying quircks).
Well, anyhow I posted here because it was the only place google sent me to when looking for this issue. I just answered to the guy since he was alone in his thread and I had the same issue (although not with pages). Just supportin', you see
But yeah, I'll post in Mavericks section. I'll do it this w.e since I hadn't the time before. Thanks for your concern btw

How to find related User commands when Use MSS PCR scenarios

Hi
We are using MSS PCR Senarios with Web dynpro Business package.
How to know which command is fired when click on buttons PCR web dynpro screens like "Sumbit" "Resubmit" buttons.
is there any document which tells about the all the standard buttons and its corresponding user commands in R/3 to handle in BADI.
I have gone through the ISR cook book but not find much information
Thanks in Advance
Gopal

Yes - it is a bit frightening... Had other Macs before this MacBook (Pro), and never experienced such a problem. Don't know - of course I look into the Preference settings from time to time, and maybe I have changed that setting on the other computers... it never occurred to me...
What an annoyance such a simple decision to make the auto-shutdown after one hour a default can be! Probably, Apple reconsiders :-D I'd rather prefer an auto-lock of the account (instead of an auto-log off)... but I believe it has been expressed often enough that, in this particular case, the - pardon me - Windows-solution (to offer a simple lock of the account, the Windows-L-key combination, IIRC) is much more practical... to copy that behaviour under Mac OS X, You'd have to go through lengths...
Anyway! Pondind, thank You very much!!! Solved a kind of embarassing, but huge problem of mine!
Best,
Björn

E-recruiting: create internal user failture when using RCF_CREATE_USER

Hi, experts
    When I create candidate and internal user in E-recuriting using report RCF_CREATE_USER, the system returns me a message: "I::000 Enter at least one number for the business partner" , and so i can't create the user successfully.
    Can anyone show me the solution?
    Thanks very much.
    Best Regards,
    qiuguo

Hi
just a thought.....it may not be creating a CP /BP....check your authorization.....hope this helps.....b/r

Problem with User exits when using custom fm

Hi everybody,
I am processing an IDoc using fm IDOC_INPUT_INVOIC_MRM. Nos I had to copy this to Z_...
And this fm has a sun-routine that calls User-exits. When I am using the standard fm, the UEs are being checked for active and executing the logic in the UE. But when I am processing IDoc using Z_...fm, the system is checking if the UEs are active. Its also active and now the cursor is coming to CALL CUSTOMER-FUNCTION '014'. But here when I press F5 in Debug, the cursor moves to the next statement after this function call without executing the user- exits. I dont know why its not executing the UE.
Is there any setting that I need to make?
thanks in advance
kris

Hi Vamsi,
User exits are specific to the object they are included in. So when you have a "CALL CUSTOMER-FUNCTION '011'" in IDOC_INPUT_INVOIC_MRM and when you have "CALL CUSTOMER-FUNCTION '011'" in your Z function module, they are two different things.
The purpose of a user exit is that you can include your logic in there within the limits defined by the object and without repairing the system. If you copied it, then you don't need the user exit anymore, as that copied object is your custom object and you can incorporate anything you want within main source code itself. If you really thing you should have that user exit, then double click on the call function statement, the system will ask if you want to create the function module, say yes and proceed with the creation.
But I don't see any reason why you will copy a standard IDOC function module(while you could have used a user exit in there) and still want to use the user exit functionality. Once you copied, it is your object and you don't need a user exit to insert code into your own object.
Hope this is clear.
Srinivas

Validation of user inputs when using ItemRenderers in DataGrid

Hi,
I have to show multiple editable columns in a DataGrid.
The columns may have different formats and datatypes e.g.
numbers, dates, string etc.
So I am using TextInput/DateField as a ItemRenderer inside
the DataGrid. I have also set the rendererIsEditor="true".
Now I want to apply validation to all these editable columns
depending on their datatypes.
I know I can do that by applying validators individually on
each column.
But is there a way I can use common validation for all the
columns that have a similar datatype or that have the same
renderer?

You can use the itemEditEnd Event of the DataGrid for your
validation. Then you can use Actionscript to make sure what the
user enters is in the right format. Example:
<mx:Script>
<![CDATA[
import mx.events.DataGridEvent;
public function processEdit(event:DataGridEvent):void {
cellValue =
TextInput(event.currentTarget.itemEditorInstance).text; // the
entered text
cell = event.dataField; //the datafield attribute of the
column
// Determine if the new value is too long for nvarchar field
if(cell == 'WLNET' && cellValue.length > 35) {
cellValue = cellValue.substr(0,35); //shortening it for user
demonstrates expected length
TextInput(event.currentTarget.itemEditorInstance).text =
cellValue;
event.preventDefault(); // Prevent the user from removing
focus, and leave the cell editor open.
// Write a message to the errorString property.
// This message appears when the user mouses over the
editor.
TextInput(event.currentTarget.itemEditorInstance).errorString="Entered
text too long.";
return;
]]>
</mx:Script>
<mx:DataGrid id="enrolled_dg" editable="true"
itemEditEnd="processEdit(event);">
I learned part of this from the Flex documentation online:
Determining
the reason for an itemEditEnd event

MX200 G2 Remove Self-view When Using Far Side Camera Control

I have a new MX200 G2 which is working great. The one feature I need to remove is the self-view while the far side is moving the MX200's camera. We use this for telepsych visits and it's very distracting for the patient sitting in the room with the MX200 see how the physician on the other end of the call is moving their camera. Here are a few settings I changed with no luck. The self-view is gone, but when the camera moves or zooms, the self-view appears for a short time.
Config/Video
"camCtrlPip CallSetup" = duration 1 second and mode off.
"selfview Default" = fullscreen = off, mode = on, on monitor role = first, PIPPositon = lowerleft
This seems to remove the self-view for everything other than camera movement during a call. What have I missed?? I didn't see any settings in the experimental mode either.

I looked through the admin guide and even on some of our endpoints, don't think what you're looking for is possible.

Per-user Views when Using VMS

Similar Messages

Maybe you are looking for