PerAdmin Field in IT 0001

Hi,
Is it possible to default field SACHP (PersAdmin) in IT 0001 instead of selecting it manually from Dropdown. Feature Pinch can be used to default Administrator Group Field. We have a requirement to default the PersAdmin field in IT 0001.
Please Advice.
Regards,
Ghanapriya

Hi Ghanapriya,
Try this code:
Infotype     Subtype     Field Name     Function Code         No.                 Indicator                 Variable Function
0000                       06               10                        P                           PSPAR-TCLAS='A'
0000                       06               12                        P                           T0001P-MOLGA='10'
0000                       06               14                        P                           P0000-MASSN='XX'
0000                       06               16                        W      P0001-SACHP='US1'
Cheers,
Donnie

Similar Messages

How to Enable Cost Center Field in Infotype 0001

Dear all my Friends,
Can anybody please tell me that how to Enable Cost Center Field in Infotype 0001, actually the problem is while hiring the employee the field itself disable and not allowing me to put any CC on that field but which should be enable while hiring or if we intend to change in future through PA30 and after that i thought i can do in Infotype 0027 also but in infotype 27 the field called Master Cost Center field is still disabled which will reflect in 0001 or Vice Versa.
So friends pls tell me where my configuration is wrong or how will i get enable that field in 0001 infotype so that i calculated the cost of that employee.
Waiting for ur Reply friends,
Thanks,
Prashant.

Dear Rajesh,
Thanx for ur Solution and i got the answer, actually i m maintaining through OM and u gave me the exact solution .
Gr8 job dear. Thanx allot once again
Thanks,
Prashant.

Create New Field in infotype 0001

Hi
Can any body guide me how to create new field in Infotype 0001,
i want to create two new fields with six reasons in each new field
Thanks

Hi,
his can be acheived through enhancement. Hope these link helps
http://help.sap.com/saphelp_erp60_sp/helpdata/en/4f/d526be575e11d189270000e8322f96/content.htm.
General steps are
Step 1
Using transaction PM01 chose the 'Enhance Infotype tab' and press the create 'All' button.
Step 2
Enter the new fields you wish to add to the Infotype.
Step 3
Once saved and activated the new fields will appear in the Infotype screen and database table
Edited by: Raghu C on Nov 4, 2009 6:15 AM

Fields on infotype 0001

what config setting controls graying out the following fields on infotype 0001 (should not be open to edit / change)
Personnel Subarea
Positin
Payroll Area etc
(PA / OM components integrated)

Hi Matt,
First, check the module pool and screen number of infotype 1 screen. This can be done by checking System -> status of infotype 1.
Go to SPRO -> Personnel Mangement -> Personnel Administration -> Customizing user interfaces - Change Screen modifications. Now select corresponding module pool and screen. Click on "Details". Select the radio button "output" for the fields like personnel subarea, position and payroll area etc.
Save.
Hope this will help u.
Reward if helpful.
Rajesh Panda

Additional field in Infotype 0001

I manage to add an additional field in the infotype 0001 in Dev client. I have a bit concern when to apply it in the production client.
Do you have any experience to share on this?

hi
test in development server later test in testing server later send it to production server
nothing to worry
all the best

Percentage field in infotype 0001

while hiring a person, the percentage field in organizational plan of infotype 0001 is defaulted as 0.00, where as it should be actually 100.00.
can any one help on what could be the possible reason and the slution.

Hi,
Go to PO03 then select the job /postion and then slect relattionship change mode and chenge the default percentage
Thanks
Paramshetty

Administrator field on Infotype 0001

We are considering populating the PERSADMIN field on an employees's Infotype 0001 Organizational Information with their HR administrator to assist in reporting and authorizations. What other application uses can this field be used for (Triggering Workflows/Emails) etc. Is it required for use in ESS type activities? I would like to understand how this field is being used by others.

Hi Keith,
The Personal Administrator is the head of the department for maintaining the personal details of the employees. You can default your Administrator group in the Feature PINCH, in which the end user can pick up the relevant administrator of the employee.
The system will pop up a mail intimation to the Personal Administrator, if any changes are made in the Infotypes, using the Dynamic Action.
In terms of ESS, if any employee changed the Personal details like address, family Dependant, the system will send a mail intimation to the Personal Administrator.
You can generate a report of employees based on the Personal Administrator.
Good Luck
Om
Reward it, if u feel helpful.

Org Unit Field in IT 0001

Hi Folks-
The Org Unit field in IT 0001in PA is not capturing the ORG unit stored in OM.Integration is active between OM and PA currently.The Job and position fields are carrying over without any issues.
Used RHINTE30- and the org unit is allready there in Table T527X. What is the solution?

Hi,
I got the same prob, and resolved with the following. Replied for general help purpose. As this post is from Dec, hopfully u hv already done.
please do the following steps.
**Go to Tcode SA38
1- Run report RHINTE10
program allows you to create object types in Personnel Administration (HR-PA) which have already been set up in Personnel Planning and Development (HR-PD) and which are needed for integration. dont forget to uncheck "Test" check box.
The following object types are relevant to integration:
PD PA
Work center (object type A) Tables T528B, T528T
Job (Object type C) Tables T513, T513S
Position (Object type S) Tables T528B, T528T
Organizational unit (Object type O) Table T527X
2) Run RHINTE20
This program can be used to check whether the relevant object types for integration have been created in both Personnel Administration (HR-PA) and Personnel Planning and Development (HR-PD).
The entries in the HR tables T513/T513S (job), T528B/T528T (position, work center) and T527X (organizational unit) are compared with the corresponding objects that have been created in the HRPnnnn file for PD in the integration plan version.
Objects that are missing either in PA or PD can be created immediately
3- Also check ur org struct in PPOME. Hope ur prob will b ok with 1st two task
regards,

HOw to find the text for PERSK field in infotype 0001

hi all
HOw to find the text for PERSK field in infotype 0001

Hi
T503T : contained the similar informative text for PERSK . read this for T503T-PTEXT.
..lakhan

Field Bline date is a required field for G/L account 1200 122400

While posting a Good receipt document using MIGO for a PO I am recieving the following error
Field Bline date is a required field for G/L account 1200 122400
Though both the document date and Posting date fields are filled with appropriate date.
The detailed message reads as follows, now my question is how to change the baseline date for the Cocd 1200 for GL account 122400
Field Bline date is a required field for G/L account 1200 122400
Message no. F5 808
Diagnosis
The value for field "Bline date" in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "122400" in company code "1200" linked to the field selection for posting key "81".
System Response
Error
Procedure
It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Bline date". If this is the case, contact the consultant responsible for the application used to call up the interface or get in contact with SAP directly.

Hello Ravinagh,
Heres what I did:
OB41> Double clicked on posting key 81> clicked on field status> Payment transactions> Both Due date and Value date have already been set to optional.
For OB14 it asks me to input a field status variant.
There are three of them. Now here is the tricky part, how do I find out which field variant has been assigned
0001     Field status for 0001
1000     Field status for CoA 1000
3000     Field status for CoC 3000
I went further and check for all the three variants one by one
and found out that in the field status> Payment transactions for the following entry in the field status group
G045     Goods/invoice received clearing accounts
The DUE DATE and VALUE DATE are suppressed. What do I need to do here?
Next I checked OBB8 to find the following three Options I dunno which one of them is applicable to the GL account 122400 for Cocd 1200. Where can I find the assignment? How can I find which payment term is being used.
   PayT        Sales text
Day limit   Explanations
0001
0           Payable immediately Due net
0002
0           Within 14 days 3 % cash discount
              Within 30 days 2 % cash discount
              Within 45 days Due net
0003
15          Within 14 days 2 % cash discount
              Within 30 days 1.5 % cash discount
              Within 45 days Due net
              Baseline date on 30 of the month
Entry 1 of 40
Well I went ahead and clicked on each of them
For 0001 the Default for Baseline date is set to Posting date (Do I need to change anything here?)
For 0002 the Default for Baseline date is set to Document date (Do I need to change anything here?)
For 0003 the Default for Baseline date is set to Posting date (Do I need to change anything here?)
Please guide me here. If you need screenshots I would be glad to mail it to you.
I hope you understood the scenario.
Thanks
Ron

How to add a field in Payslip

Dear friends,
We created a field in Infotype 0001 to capture the detail of which section of the department the employee belong to... And our abapers were successful in creating it when we give data it gets updated..
Now we have to bring that in the payslip..Previously we had both department and section in our payslip but we displayed the dept as Branch office name and in the section field we displayed the dept he belong to...
Now we corrected and displayed the department in the dept field and we want to display the section data which we capture using the new field created in IT0001 in the Section field in payslip...
Pls guide me with what are the steps to be followed to display the section data in the section field in payslip...
Now the status is when i go to SE11 and give P0001 and the new section field is there under .Include..
From here how should i move ahead...Pls guide me
Ready to give full marks to all those help me solve this issue.
Thanks
Nelson

Hi Akshay...thanks a lot...i was able to include in the P0001 table and i selected that field...but when i run the simulation i didnt get that section data in that field in the payslip...
But i checked the IT0001 the section field contains the data as "Accounts"...but i am not sure why its not getting reflected in the payslip...
Do u see any other reasons... should i need to make anyother changes also?
Pls guide me..
Thanks
Nelson

Error: Field Pmnt terms is a required field for G/L account

Hi Experts....
When I am trying to release the billing document no in VF02
It gives me an error
Field Pmnt terms is a required field for G/L account
This error comes only when payments are made through Credit Card....
Message F5808.
when I did a debug on this the field freigabe is made 'X'
and I hve cleared the value..Now it saves but the accounting document is not created.
We are in 4.7C version..
Can any one help me out in this issue....
Thanks for your help....
Regards,
Chaitanya

Hi Friends,
Please refer SAP OSS Note 119047.
In the OSS Note they have mentioned..
Pass the payment terms to the field
xaccit-zterm = '0001'. in the User Exit.
Program : LV60BF0C,
Customer Function '002'.
Include File ZXVVFU02.
SE 37:- EXIT_SAPLV60B_002
Still I don't understand why SAP doesn't support payment terms for Credit Card. But when a Sales Order is created without credit card the field xaccit-zterm has a value.
Thanks,
Chaitanya K

Addition of new fields in wrfapc02

Hi,
I need to add an extra field in the transaction wrfapc02 which is for SAP Retail. Could someone guide me the process. The BADI available adds an extra tab but we need to add a field on the Purchasing tab.
Thanks,
Dishant

Hi Hoffmann,
Thks for responding. I will make you clear the procedure tht i have followed
1) Copied the MGD1 function group to ZMGD1.
2) Copied MARA table into ZMARA.
3) Followed the procedure given in website - http://www.****************/Tutorials/ExitsBADIs/MM/MM01.htm
4) Added two fields in screen 0001 pattno patttype.
4) Successed in creation of screen and it is even showing when i am opening MM01 screen basic data1 the two fields that i have added.
5) Issue is when i am giving the data it is not gettong stored in ZMARA table, as i have not given the coding in USER exit EXIT_SAPLMGMU_001 my new fields data will not be saved but the material number has to be saved thts my doubt.
Hope it is pretty clear.!!!

IT 0001 feature

Hi folks,
Is there any feature in PE03 or other way to set an specific value for a field in IT 0001 ? For example, if an employee is in X or Y Company Code then set another field in the same Infotype.
Thanks for any suggestion.

Hi Andrey,
We have feature P0001 but for screen modifications (different screen/fields depending on different country groupings, employee group/subgroup etc.) only. Then there are others such as VDSK1, PINCH, ABKRS etc to default other values. Can you explain the requirement in detail?
Donnie

IT 0001

Hi,
We have a unique situation wherein we want a field in IT 0001.
In IT 0001 for the Program MP000100 the Standard Screen is 2000 and it has a field SBMOD (Administrator Group). We want that field to be visible for USA with Screen 2010. We are not able to copy Screen 2000 for USA as Screen 2000 doesnu2019t have the field EXMPT (Indicator: Exempt/non-exempt) which we want in the US Specific Screen. Is it Possible to incorporate the field SBMOD (Administrator Group) in Screen 2010 ( For US)?
Please Advice.
Regards,
Ghanapriya

Hi,
yes you can do it with the help of abaper(they used the cancept field exit or change pointers)
Rupa

PerAdmin Field in IT 0001

Similar Messages

Maybe you are looking for