Percent Complete: 100; Status: Failed
Hello,
I just upgraded machines and so had to reinstall my Pro apps including Compressor 3.0.3. Now when I use Motion 3.0.2 -> File -> Export Using Compressor and then launch the Compressor jobs they each fail. When I look at the Status from the Batch Monitor it says, "Percent Complete 100; Status: Failed" and the corresponding log entry is:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<services></services>
The motion file was copied over for rendering properly but there is no resulting movie file. This is true across multiple shots. What might have caused this from a fresh install of Pro apps on the new iMac (10.5.2)?
Thanks.
I've found that I can get a movie file with an uncompressed 10-bit option but not 8 bit also. Why would this be? (The initial compression that keeps failing is H.264.)
Similar Messages
-
Task Percent Complete and Actual Dates - RELATE TO STATUS
Hi,
We are on PPM 5.0.
For Project Management (cProjects), we have a requirement whereby task status should not be set to 'Complete' unless:
1. The Percent Complete is 100%
2. The Actual Start and Actual Finish dates have been entered.
Is it possible to realize this?
Please advise.Hi,
%age completion is independent of the status of the task as per standard SAP PPM 5.0. You'll need to use BADIs in order to meet you requirement.
Gautam -
Sql Server 2008 R2 setup status failed
Hi guys, plz help me when i install Sql2008 i get this error.... plx help me if you have solution...
Thanks in Advance...
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068052377
Exit facility code: 1212
Exit error code: 1639
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-03-14 18:21:32
End time: 2014-03-14 18:30:00
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
Machine Properties:
Machine name: NIRMAL-PC
Machine processor count: 8
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United Kingdom)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: E:\Software _2\Software _2\SQL2008\x64\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.SQL2008\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.SQL2008\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.SQL2008\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.SQL2008\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: NIRMAL-PC\sdfg
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.SQL2008\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQL2008
INSTANCENAME: SQL2008
ISSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: NIRMAL-PC\sdfg
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: True
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Analysis Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_as_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Integration Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Books Online
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\SystemConfigurationCheck_Report.htmHello,
Please try to uninstall SQL Server using YoyoYu suggestions on the following thread:
http://social.msdn.microsoft.com/Forums/en/sqlexpress/thread/4d6158a1-b601-428c-aad4-a1716e76de1a
When finish, re-install SQL Server again.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Hi
I migrate from Exchange 2007 to 2013
I move all mailboxes (1400mailbox) without any issue except 1 mailbox .
From Ecp i cannot see any failed report to identify what was the issue .
when i try to moving from EMS snd i check the status it is showing status fail .
how can i monitor and identify what was the issue to be able moving the last mailbox
MCP MCSA MCSE MCT MCTS CCNA1/28/2015 11:24:55 AM [EXCHMBXSRV3] Connected to
source mailbox
'3e8c59f6-eb99-4fcb-8fc2-0133ee2451a8 (Primary)', database
'heiscomail\HEISCOSG500-01\HEISCODB500-01', Mailbox server
'HEISCOMAIL.CORP.NET'
Version 8.3 (Build 348.0).
1/28/2015 11:24:56 AM [EXCHMBXSRV3] Request processing started.
1/28/2015 11:24:56 AM [EXCHMBXSRV3] Source mailbox information:
Regular Items: 98, 44.49 MB (46,653,429 bytes)
Regular Deleted Items: 0, 0 B (0 bytes)
FAI Items: 66, 0 B (0 bytes)
FAI Deleted Items: 0, 0 B (0 bytes)
1/28/2015 11:24:56 AM [EXCHMBXSRV3] Cleared sync state for request
3e8c59f6-eb99-4fcb-8fc2-0133ee2451a8 due to 'CleanupOrphanedMailbox'.
1/28/2015 11:24:56 AM [EXCHMBXSRV3] An old copy of the mailbox was removed
from the destination database. The operation will try again in 30 seconds.
1/28/2015 11:25:30 AM [EXCHMBXSRV3] Mailbox signature will not be preserved
for mailbox '3e8c59f6-eb99-4fcb-8fc2-0133ee2451a8 (Primary)'. Outlook clients
will need to restart to access the moved mailbox.
1/28/2015 11:25:31 AM [EXCHMBXSRV3] Stage: CreatingFolderHierarchy. Percent
complete: 10.
1/28/2015 11:25:31 AM [EXCHMBXSRV3] Initializing folder hierarchy from
mailbox '3e8c59f6-eb99-4fcb-8fc2-0133ee2451a8 (Primary)': 30 folders total.
1/28/2015 11:25:31 AM [EXCHMBXSRV3] Folder creation progress: 0 folders
created in mailbox '3e8c59f6-eb99-4fcb-8fc2-0133ee2451a8 (Primary)'.
1/28/2015
11:25:31 AM [EXCHMBXSRV3] Folder hierarchy initialized for mailbox
'3e8c59f6-eb99-4fcb-8fc2-0133ee2451a8 (Primary)': 29 folders created.
1/28/2015 11:25:31 AM [EXCHMBXSRV3] Stage: CreatingInitialSyncCheckpoint.
Percent complete: 15.
1/28/2015 11:25:31 AM [EXCHMBXSRV3] Initial sync checkpoint progress: 0/30
folders processed. Currently processing mailbox
'3e8c59f6-eb99-4fcb-8fc2-0133ee2451a8 (Primary)'.
1/28/2015 11:25:31 AM [EXCHMBXSRV3] Initial sync checkpoint completed: 27
folders processed.
1/28/2015 11:25:31 AM [EXCHMBXSRV3] Stage: LoadingMessages. Percent complete:
20.
1/28/2015 11:25:32 AM [EXCHMBXSRV3] Messages have been enumerated
successfully. 149 items loaded. Total size: 37.05 MB (38,849,527 bytes).
1/28/2015
11:25:32 AM [EXCHMBXSRV3] Stage: CopyingMessages. Percent complete:
25.
1/28/2015 11:25:32 AM [EXCHMBXSRV3] Copy progress: 0/149 messages, 0 B (0
bytes)/37.05 MB (38,849,527 bytes), 10/30 folders completed.
1/28/2015 11:25:47 AM [EXCHMBXSRV3] Copying messages is complete. Copying
rules and security descriptors.
1/28/2015 11:25:48 AM [EXCHMBXSRV3] Initial seeding completed, 149 items
copied, total size 37.05 MB (38,849,527 bytes).
1/28/2015
11:25:48 AM [EXCHMBXSRV3] Stage: IncrementalSync. Percent complete:
95.
1/28/2015 11:25:48 AM [EXCHMBXSRV3] Folder hierarchy changes reported in
source '3e8c59f6-eb99-4fcb-8fc2-0133ee2451a8 (Primary)': 0 changed folders, 0
deleted folders.
1/28/2015 11:25:48 AM [EXCHMBXSRV3] Incremental Sync
'3e8c59f6-eb99-4fcb-8fc2-0133ee2451a8 (Primary)' completed: 0 hierarchy
updates, 0 content changes.
1/28/2015 11:25:48 AM [EXCHMBXSRV3] Stage: IncrementalSync. Percent complete:
95.
1/28/2015 11:25:48 AM [EXCHMBXSRV3] Final sync has started.
1/28/2015 11:25:58 AM [EXCHMBXSRV3] Folder hierarchy changes reported in
source '3e8c59f6-eb99-4fcb-8fc2-0133ee2451a8 (Primary)': 0 changed folders, 1
deleted folders.
1/28/2015 11:25:58 AM [EXCHMBXSRV3] Incremental Sync
'3e8c59f6-eb99-4fcb-8fc2-0133ee2451a8 (Primary)' completed: 1 hierarchy
updates, 0 content changes.
1/28/2015 11:25:58 AM [EXCHMBXSRV3] Source mailbox information:
Regular Items: 98, 44.49 MB (46,653,429 bytes)
Regular Deleted Items: 0, 0 B (0 bytes)
FAI Items: 66, 0 B (0 bytes)
FAI Deleted Items: 0, 0 B (0 bytes)
1/28/2015
11:25:58 AM [EXCHMBXSRV3] Stage: FinalIncrementalSync. Percent
complete: 95.
1/28/2015 11:25:59 AM [EXCHMBXSRV3] Mailbox store finalization is complete.
1/28/2015 11:25:59 AM [EXCHMBXSRV3] SessionStatistics updated.
1/28/2015 11:25:59 AM [EXCHMBXSRV3] Verifying mailbox contents...
1/28/2015
11:25:59 AM [EXCHMBXSRV3] A missing item was encountered: Missing
Item (IPM.Note) Subject:"RE: Daily Report 12-12-2014", Folder:"Outbox"
1/28/2015 11:25:59 AM [EXCHMBXSRV3] A missing item was encountered: Missing
Item (IPM.Note) Subject:"MOWAD CIVIL ID", Folder:"Outbox"
1/28/2015 11:25:59 AM [EXCHMBXSRV3] A missing item was encountered: Missing
Item (IPM.Note) Subject:"RE: Daily Report 02-12-2014", Folder:"Outbox"
1/28/2015 11:25:59 AM [EXCHMBXSRV3] A missing item was encountered: Missing
Item (IPM.Note) Subject:"CRANE CHARGE", Folder:"Outbox"
1/28/2015 11:25:59 AM [EXCHMBXSRV3] A missing item was encountered: Missing
Item (IPM.Note) Subject:"2296 attachment", Folder:"Outbox"
1/28/2015 11:25:59 AM [EXCHMBXSRV3] A missing item was encountered: Missing
Item (IPM.Note) Subject:"PPEP FOR KNPW NEW REFINERY PACKAGES", Folder:"Outbox"
1/28/2015 11:25:59 AM [EXCHMBXSRV3] A missing item was encountered: Missing
Item (IPM.Note) Subject:"Concrete Quantity 30-10-2014", Folder:"Outbox"
1/28/2015 11:25:59 AM [EXCHMBXSRV3] A missing item was encountered: Missing
Item
(IPM.Note) Subject:"NCR REMINDER B-61", Folder:"Outbox"
1/28/2015 11:25:59 AM [EXCHMBXSRV3] A missing item was encountered: Missing
Item (IPM.Note) Subject:"Emailing: gate pass.pdf", Folder:"Outbox"
1/28/2015 11:25:59 AM [EXCHMBXSRV3] A missing item was encountered: Missing
Item (IPM.Note) Subject:" Concrete Quantity 29-09-2014", Folder:"Outbox"
1/28/2015 11:25:59 AM [EXCHMBXSRV3] A missing item was encountered: Missing
Item (IPM.Note) Subject:"WORKING SCHEDULE- EID AL ADHA", Folder:"Outbox"
1/28/2015 11:25:59 AM [EXCHMBXSRV3] Mailbox contents verification complete:
27 folders, 160 items, 44.49 MB (46,652,893 bytes).
1/28/2015 11:25:59 AM [EXCHMBXSRV3] Stage: FinalIncrementalSync. Percent
complete: 95.
1/28/2015 11:25:59 AM [EXCHMBXSRV3] Fatal error
TooManyMissingItemsPermanentException has occurred.
ObjectState : New
[PS] C:\Windows\system32>
MCP MCSA MCSE MCT MCTS CCNA -
I've downloaded several videos from ITMS but the most recent one I've purchased will complete the download process and then fail. I've tried "check for purchases" several times and always get the same result - download the ~200 MB file, then fail when the progress bar is full.
I've tried disabling Grisoft AntiVirus, defragmenting the hard drive, chkdsk for errors (no errors), but I keep getting the same thing every time - about 8 tries):
[Red X graphic]
There was an error downloading your purchased music.
An unknown error occurred (0xFFFE7958).
Use the Check for Purchased Music command in the Advanced menu to try again later.
[OK]
I don't use iTunes for music - just for video downloads.
Any ideas?
dcsSame problem here!!!
Three times I tried to download the D.Housewives and three times it failed. I did the check the purchased and was able to start again but everytime it got to either 99% or 100% it failed with a error but on the third time it failed I guess it triggered something and it no longer shows as Purchased Music. I contacted Apple and they told me I am out of luck!
Good thing my Ipod is less then 30 days old as it is going back to the store.
Here is their response after taking my $1.99 but no delivering the product!!!
Dear Steve,
Thank you for contacting the iTunes Music Store.
Per our terms of sale, all music/videos purchased from the iTunes Music Store is ineligible for refund. This policy matches our refund policies on open or downloaded software and provides protection for copy written materials.
For more information, please review all the Terms of Sale for the iTunes Music Store at http://www.apple.com/support/itunes/legal/policies.html. -
SMART status failing on a WD Scorpio Black WD3200BEKT 320GB 7200 RPM
I just recently purchased a Western Digital Scorpio Black WD3200BEKT 320GB 7200 RPM drive to put in my 1st Gen MacBook Pro. Ever since installing the drive, I've had random beach balls happen usually when there is a fair amount of disk I/O.
Thinking the drive was bad, I sent it back and got another one. I am still seeing the same frequent beach balls requiring a hard restart to get the system to be responsive again.
Checking the System Profiler, I see that the drive is failing SMART status. I also checked the kernel logs and am getting I/O errors on the drive at the point when the system beach balls.
I am pretty certain it isn't the drive. I'm at a loss for what to try next. Is this drive not compatible with my SATA interface. Any suggestions or comments?
Below are some of my pertinent machine information from System Profiler:
Model Name: MacBook Pro 15"
Model Identifier: MacBookPro1,1
Processor Name: Intel Core Duo
Processor Speed: 1.83 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP11.0055.B08
SMC Version (system): 1.2f10
Sudden Motion Sensor:
State: Enabled
Below is the Serial-ATA information from the System Profiler:
Intel ICH7-M AHCI:
Vendor: Intel
Product: ICH7-M AHCI
Speed: 1.5 Gigabit
Description: AHCI Version 1.10 Supported
WDC WD3200BEKT-60F3T1:
Capacity: 298.09 GB
Model: WDC WD3200BEKT-60F3T1
Revision: 12.01A12
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Mac OS 9 Drivers: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Failing
Volumes:
Macintosh HD:
Capacity: 297.77 GB
Available: 153.19 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
I also ran this to check the current speed of the SATA interface since the drive is a SATA II drive with a 3.0gb/s burst.
$ sudo ioreg -l | grep 'Interconnect"="SATA"'
| | | | "Protocol Characteristics" = {"Physical Interconnect"="SATA","Physical Interconnect Location"="Internal/External"}
| | | | "Protocol Characteristics" = {"Physical Interconnect"="SATA","AHCI Port Number"=0,"Physical Interconnect Location"="Internal","Port Speed"="1.5 Gigabit$
| | | | "Protocol Characteristics" = {"Physical Interconnect"="SATA","Physical Interconnect Location"="Internal"}
The above shows that the interface is running at 1.5gb/s SATA I which is what I excepted on this system.
Thanks!
DustinSounds like you have things well sorted out.
Despite that fact that you have had two consecutive HDDs with defects does not, necessarily, mean that all of those drive are defective. However, you are fortunate that you were able to get you money back. Seagate makes good drives, as does WD, and hopefully you have paid your dues and you will have no more incidents.
Do post back should you run into stuff and need to bounce ideas off someone else.
Good luck.
cornelius
I will certainly report back on my luck with Seagate.
You are correct that the failure of two consecutive drives does not mean the whole line is faulty. The drive I was replacing in the MacBook Pro was actually a Western Digital Scopio as well (just not a Blue or Black) and it has performed flawlessly. It's the drive I have reinstalled twice now while I waited for the replacement drive to be shipped.
Another interesting anecdote is that I searched the NewEgg customer comments for reports of SMART errors on the Western Digital Scorpio Black drive I had ordered and sure enough, there were quite a few postings where people had tried multiple times to get a good drive.
It's just one of those things that you start to question, especially with older hardware like I am using (1st Gen MacBook Pro) that maybe backwards compatible quirks between SATA 1 and SATA 2 are the real problem not the drive itself. I'm still not 100% convinced that the drives were the true culprit. Hard to say for sure.
Not to mention all the troubles I've been reading about with 3rd party drives and the recent 1.7 EFI update which has caused similar errors as to what I was seeing with these drives. The first drive I had didn't throw any SMART errors, or at least I didn't notice them.
I'm gonna order the Seagate Momentus 7200.4 ST9320423AS 320GB 7200 RPM 2.5" SATA 3.0Gb/s and see what happens. I'll report back my findings in another thread so that people who search for the Seagate drive will have a more related thread to read.
Dustin -
Cross Project Percent Completes
I am developing a MS Project 2010 schedule in which the client would like to see an overall percent complete for process areas that repeat in lower level sub-projects.
For example, the project breaks down into system types, then individual systems within those types, then process areas, such as CM, Maintenance, Provisioning, Supply Chain, etc., with each of these process areas breaking down into individual activities. What
I am trying to develop is a percent complete for the process areas at the top most level (across the system types), based on the percent completes for those process areas at the individual system level. The verticals roll up fine (percent complete for the
process area within the system to the system, then to the overall system type, then to the overall project), but I'm trying to do a more horizontal view of the project's status. Never done anything like this before, so any help would be appreciated.Hi Baltjazz08,
Here is all relevant information about outline codes (both process and configuration). Those links are for 2003 but applicable to 2007, 2010 or 2013.
http://office.microsoft.com/en-ca/project-help/defining-the-structure-of-your-project-with-custom-outline-codes-HA001020301.aspx
http://office.microsoft.com/en-us/project-help/create-an-outline-code-HP045331925.aspx
Then I'm not sure that it will help in doing what you need. Creating a custom field for entering % complete on tasks you're interested in would be the best solution. Anyway be careful concerning the rollup for total. If you choose average, it might not give
a proper result, since if 2 tasks have a different quantities of work, the % complete of the summary task will not be the average of the 2 % complete.
An idea would be to use a WBS for all projects, containing all process areas. Then using SSRS or Excel services reporting capabilities, you'll be able to extract horizontal % complete of process areas through your projects.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS -
Backup completed with status "communications failure with client" error
Hi
Getting error while taking filesystem backup of client in oracle secure backup.
We have administrator server & media server on same server.
We want to take backup of filesystem/rman backup of client host...but unable to communicate.
following steps have done
1.install oracle secure backup client on host
2. add host in administrator domain server
3.check connectivity from administrator server to client host but getting following error
[root@isgmmlds06 ~]# obtool pingh isgmmlds250.insolutionsglobal.local
Error: can't connect to NDMP server on isgmmlds250.insolutionsglobal.local (address isgmmlds250.insolutionsglobal.local) - timeout waiting for connection status message
isgmmlds250.insolutionsglobal.local (address isgmmlds250.insolutionsglobal.local): Oracle Secure Backup services are available
also tried to take filesystem backup but getting following error
2011/09/28.19:50:49 Job created.
2011/09/28.19:50:49 Dispatching job to run on administrative server.
2011/09/28.19:53:59 Backup completed with status "communications failure with client".
2011/09/28.19:53:59 (Diagnostic data: 0x20008F06/21, dev_delay 0, data_delay 900, fail, data_err.)
2011/09/28.20:09:55 Dispatching job to run on administrative server.
2011/09/28.20:09:59 Backup completed with status "communications failure with client".
2011/09/28.20:09:59 (Diagnostic data: 0x20008F06/21, dev_delay 0, data_delay 900, fail, data_err.)
2011/09/28.20:25:55 Dispatching job to run on administrative server.
2011/09/28.20:25:59 Backup completed with status "communications failure with client".
2011/09/28.20:25:59 (Diagnostic data: 0x20008F06/21, dev_delay 0, data_delay 900, fail, data_err.)
2011/09/28.20:41:55 Dispatching job to run on administrative server.
2011/09/28.20:41:59 Backup completed with status "communications failure with client".
2011/09/28.20:41:59 (Diagnostic data: 0x20008F06/21, dev_delay 0, data_delay 900, fail, data_err.)
2011/09/28.20:57:55 Dispatching job to run on administrative server.
2011/09/28.20:57:59 Backup completed with status "communications failure with client".
2011/09/28.20:57:59 (Diagnostic data: 0x20008F06/21, dev_delay 0, data_delay 900, fail, data_err.)
2011/09/28.21:13:55 Dispatching job to run on administrative server.
2011/09/28.21:13:59 Backup completed with status "communications failure with client".
2011/09/28.21:13:59 (Diagnostic data: 0x20008F06/21, dev_delay 0, data_delay 900, fail, data_err.)
2011/09/28.21:29:55 Dispatching job to run on administrative server.
2011/09/28.21:29:59 Backup completed with status "communications failure with client".
2011/09/28.21:29:59 (Diagnostic data: 0x20008F06/21, dev_delay 0, data_delay 900, fail, data_err.)
Note : we are able to take filesystem/rman backup of same server where administrator domain & media server is installed.
please revert.
Regards
shdoutput for pingh
from administartor server
[root@isgmmlds06 ~]# obtool pingh isgmmlds250.insolutionsglobal.local
isgmmlds250.insolutionsglobal.local (address isgmmlds250.insolutionsglobal.local): Oracle Secure Backup and NDMP services are available
and from cllient server
[root@isgmmlds250 ~]# obtool pingh isgmmlds06
isgmmlds06 (address isgmmlds06): Oracle Secure Backup and NDMP services are available
Error: can't connect to Oracle Secure Backup service daemon on isgmmlds06 (address 169.254.95.120) - operation timed out -
Project Physical Percent Complete IS not Getting updated in Fusion Projects
Hi Everyone,
I am Working on Fusion PPM Release9
In Project Plan Type i have set Physical Percent Complete to Cost & Automatic But in dashboard the Project Physical Percent Complete is not Updating
Please help me with the issue
Thanks
ShaanHi Kedar,
It should not happen.
Question: Do such projects have a direct underlying task?
I have know a problem, which occurs only that the project has direct underlying task. If yes, I will find the note for it.
Kind regards,
Zhenbo -
Complete MRP status according to Sales order schedule line data
Dear All,
Please help me to get technical configuration releted to
"complete MRP status according to Sales order schedule line data"
or MRP w.r.t. Schedule line
Please send fields and table and logic specification .
Thanks & Regards,
Ashish GautamYou can use following Fm for change sales order
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
salesdocument = p_vbeln
order_header_in = s_order_header_in
order_header_inx = s_order_header_inx
behave_when_error = 'P'
TABLES
return = it_return
order_item_in = i_order_item_in
order_item_inx = i_order_item_inx
schedule_lines = i_sched
schedule_linesx = i_schedx. -
Creating Pivot Table in XML Publisher having Completed Warning Status
Hi guys,
I really need you expertise on this. please help :(
- I created a Conc. Program that has XML ouput Named Sales Report.
- Then I connect that to my sales.RTF template.
this is always been what i'm doing and its fine but my case now is that.
- Creating my .RTF template in ms word, I used PIVOT table. It is okay when I loaded the xml there then view ouput.
but when I upload it in oracle and connect to my concurrent Program there report is 'Completed Warning Status'
Does anyone have any idea why? or is there anyway I can produce Pivot report with xls output?
Thanks in advance.
RDBMS : 11.1.0.7.0
Oracle Applications : 12.1.3
regards,
RandyHi There,
I am encountering the same and I wonder if you've ever got it resolved. If yes would you please share the solution? -
Hi,
I am using OIM 9.1.0.2
When I install the AD connector from Deployment Manager -->Install Connector, It shows the error
DOBJ.XML_IMPORT_ERROR
Unknown tag OBJ_OFFLINED recieved.
Step 2 : Connector Installation
ActiveDirectory 9.1.1.7.0 Installation Status : Failed
Configuration of Connector Libraries
X Import of Connector XML Files (Using Deployment Manager)
X Compilation of Adapter Definitions
Click Retry to retry the installation after correcting the errors.
What needs to be done for this ?
Regards
PraveenWith the introduction of oim 9.1.0.2, the Offline-Line Provisioning attribute was added to the Resource Object. You are trying to import the connector into an environment that is out of date. The solution to this is to open up the XML file, and cut out the XML tag within your resource object for OBJ_OFFLINED and then it should work. But the next issue you are going to run into is most likely the connector version is not supported in your version so it might not work.
-Kevin -
Powerbook G4 HD SMART Status: Failing
My powerbook G4 (1.5GHZ, 1GB RAM, OS 10.3.9)recently runs very slowly, sometimes freezed up during power off process. I checked the activity monitor to see none program hogging the cpu and memory, There are about 37GB free space on the hard drive. Checked the Disk Utility and saw the SMART status: Failing in red letters. Can anyone tell me if that is the sign the HD is going to die soon? If I used the install CDs to reinstall very thing, it will fix the problem or not? Or I just need a new HD? Luckly I was able to backup everything on my Mac to my desktop. Thx
Welcome to the Apple discussions.
That means that it's time to replace the hard drive, as it will fail shortly due to a hardware failure. If you want more detail on what is failing, install Smart Utility from Volitans.
New hard drives are cheap ... good source is Newegg.com, as they have many user reviews, good prices, good service. I've bought drives from them for years, and can recommend them. You'll want a parallel ATA interface 2.5" hard drive. Can't use a serial ATA (SATA) interface hard drive. -
Httpd service does not start- shows status FAILED
Hi,
I have just installed ORACLE ENTERPRISE LINUX UPDATE 5,
now, my issue is when i give the following command , it shows status FAILED.
# service httpd start
starting httpd: [FAILED].
can anybody help me out.
regards,
CharanSeems like your system is not configured correctly.
Are you using the correct user (the same that is the owner of the HTTP software)?
Is there already another process running on the port?
What is the output in the Apache logfiles?
cu
Andreas -
OS 10.5.8 on a 1.8 GHz Power PC G5. Installed Western Digital WD1002FAEX as a second internal hard drive. I also installd the jumper needed to slow HD down for this computer. Initialized and formated the HD was able to back up a large iPhoto file and am still able to acceass the file from the new HD. Now Disk Utility is reporting a fatal hardware error-S.M.A.R.T. status failing. Is there hope?
Is that on your first drive or the new one???
Only experience I had with SMART warning was that in less than 48 hrs it was dead for good.
Maybe you are looking for
-
Constant Crashes with Snow Leopard 6.1
I, like many others, am having a terrible time of it since installing Snow Leopard. Nearly everything is crashing at some point - even Apple apps. Safari, Firefox, iTunes, Mail - all crash unexpectedly. Even when I quit legitimately using CMD+Q I get
-
How to animate adjustment layers from photoshop?
Hi, I am trying to animate an adjustment layer in Flash with Photoshop. The only way to describe the effect I'm looking for is if you apply an adjustment layer to an image/photoshop file (i.e. Hue/Saturation) and move the slide bar from one side
-
Is the earpods of my ipod touch5 can excange with the new one? my ipod still under warranty
my ipod touch's warranty will expired on 11th may btw. anybody can answer my question?
-
How can I delete my account without making a phone call?
As above.I created an account only to redeem a voucher which was for a TV edisoe, because the voucher was bought in the US I cannot redeem it. Created the account simply to watch the prog but now I can't I am not comfortable having a credit card deta
-
VPRS price needs to be same in invoice
Hi Folks, I had created sales order on 25.01.2011 and created invoice on today...the cost price for material X on 25.01.2011 is RS 10 but today CP is RS 15 as default system pick the current price as CP but my requirement is should pick the CP rs 10