Percent of total and percent of completion?

would anyone mind helping me with which equations to use for a "percent of total" and percent of completion equations?
i have a total amount and i would like to list the various items that make up this total in chronological order so i can see the percentage in percentage and in actual dollars but also as a "percent completion" in percentage and in real dollars.
i am envisioning something like this for percent - percent completion - dollars per item - dollars per completion
line 1     1%          1%               $1          $1
line 2      2%          3%               $2          $3
line 3     97%          100%          $97          $100
total      100%                           $100
i am a little new to this so any suggestions will help a great deal.
THANKS

hi barry.
thank you.
i have a construction budget with - say - 18 items. these 18 items go chronologically from start to finish for the construction. i would like to show what percentage of the total budget each item is (percent of total dollars i guess) but i would also like to sum up the "percent completed" for each line item so that when you looked at the results for - say line 8 - you could see that you were X% completed for the whole project in terms of the total dollars allotted for the whole project (100%).
what i was envisioning was that it would be possible to do this both in terms of a number for the /percent/ of each of these but also in terms of a /dollar/ amount for each of these.
one set would be the individual line item and the other set would be added up as you went down the list and completed the work.
THANKS

Similar Messages

  • Calculating Percent totals and Averages in SSRS

    Below is a report created using SSRS. I want to be able to calculate the percentage(%) total to add up to 100 % in the Total column. For some reason my averages are not working as you can see from the table. The idea is to calculate the averages of opportunities
    as well as Sold. But from my calculation, things are not adding up as I supposed. This report is not grouped by parent. How do I make this to work as it should? Thank you.
    (NB: Please zoom in to view the image)
    Zionlite

    Hi,
    According  to the description, I doubt you may manually add Total and Averages columns. Did you manually add Local and International or they were in a column group?
    You can use the following expression for the Opportunity Cost(averages) column in the total row:
    =Sum(Fields!opportunitycost.Value)/2
    How did you calculate the percentage column? If it is Sold value divided by Opportunity Cost value, use:
    =Sum(Fields!sold.Value)/Sum(Fields!opportunitycost.Value)
    Also try to define the scope in the expression and see if it make difference.
    If there is no progress, please capture the screenshot of your design tab.(Click on the report and capture the image of your report structure)
    Also, tell us the expression of the text box which in problem.
    Thanks.
    Tracy Cai
    TechNet Community Support

  • ITunes 12.0.1 now just "hangs" and does not complete the sync with my iPhone (iOS 6.1.6).

    Hello all,
    I've seen similar posts earlier in Apple discussions, but I haven't come across a definitive answer yet…So, let me ask again:
    Up until 6-7 hours ago, iTunes 12.0.1 was working perfectly well including syncing with my iPhone (I use an oldie but a goodie and it suits my purposes, iOS 6.1.6, 3GS).  Specifically iTunes now "hangs" and will not complete the syncing process with my iPhone. It get to "2 of 6" in the backing up process, and then the spinning beach ball appears. I keep my iTunes library on a separate external HD (USB).
    Even if I only want to launch iTunes 12 to use it (and NOT sync), the application freezes.
    In similar posted questions, "Linc Davis" has asked that the user run a diagnostic using the Terminal utility.  I have done this, and I paste the results below.
    Any help with this is appreciated!
    System Version: OS X 10.8.5 (12F45)
    Kernel Version: Darwin 12.5.0
    Boot Mode: Normal
    Model: MacBookPro6,2
    USB
       USB Optical Mouse (KYE Systems Corp.)
    System diagnostics
       2014-11-06 iTunes hang
       2014-11-06 iTunes hang
       2014-11-06 iTunes hang
       2014-11-06 iTunes hang
       2014-11-06 iTunes hang
       2014-11-06 iTunes hang
       2014-11-06 iTunes hang
       2014-11-06 iTunes hang
       2014-11-06 iTunes hang
       2014-11-06 iTunes spin
    User diagnostics
       2014-10-26 DiskAid crash
       2014-11-03 CalendarAgent crash
    Kernel messages
       Nov 4 00:58:33   wl0: Roamed or switched channel, reason #2, bssid 4a:xx:xx:xx:xx:70 (note: I blocked these numbers out)
       Nov 4 09:11:52   SIOCPROTODETACH_IN6: utun0 error=6
       Nov 4 09:26:03   wl0: Roamed or switched channel, reason #8, bssid 4a:xx:xx:xx:xx:70
       --- last message repeated 5 times ---
       Nov 5 00:53:48   IOAudioStream[0xffffff8020a0b200]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (1,464)->(2,668).
       Nov 5 00:58:25   IOAudioStream[0xffffff8020a0b200]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (1,444)->(2,644).
       Nov 5 02:48:38   IOAudioStream[0xffffff8020a0b200]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (1,440)->(2,640).
       Nov 5 02:48:38   wl0: Roamed or switched channel, reason #8, bssid 4a:xx:xx:xx:xx:70
       --- last message repeated 1 time ---
       Nov 5 02:51:16   IOAudioStream[0xffffff8020a0b200]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (1,420)->(2,620).
       Nov 5 08:10:45   SIOCPROTODETACH_IN6: utun0 error=6
       Nov 5 08:26:07   wl0: Roamed or switched channel, reason #8, bssid 4a:xx:xx:xx:xx:70
       Nov 5 10:09:50   smb_ntstatus_error_to_errno: Couldn't map ntstatus (0xc0020050) to errno returning EIO
       Nov 5 12:43:34   SIOCPROTODETACH_IN6: utun1 error=6
       Nov 5 12:46:11   wl0: Roamed or switched channel, reason #8, bssid 4a:xx:xx:xx:xx:70
       Nov 5 16:55:00   SIOCPROTODETACH_IN6: utun1 error=6
       Nov 5 21:51:41   IOAudioStream[0xffffff8010256400]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (1,418)->(2,618).
       Nov 5 21:52:04   IOAudioStream[0xffffff8010256400]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (1,658)->(2,858).
       Nov 5 21:53:44   IOAudioStream[0xffffff801567f000]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (1,478)->(2,678).
       Nov 5 21:54:28   IOAudioStream[0xffffff801567f000]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (1,458)->(2,658).
       Nov 5 22:00:05   SIOCPROTODETACH_IN6: utun1 error=6
       Nov 5 22:08:48   IOAudioStream[0xffffff80180a4200]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (1,40c)->(2,60c).
       Nov 5 22:31:57   SIOCPROTODETACH_IN6: utun1 error=6
       Nov 5 23:01:19   wl0: Roamed or switched channel, reason #8, bssid 4a:xx:xx:xx:xx:70
       Nov 6 00:01:42   SIOCPROTODETACH_IN6: utun0 error=6
    Loaded extrinsic kernel extensions
       com.freecom.driver.BoulderScsi (1.0.0d1)
    Extrinsic daemons
       com.bitdefender.CoreIssues
       com.bitdefender.Daemon
       com.bitdefender.UpdDaemon
       com.wdc.WDSmartWareServer
       com.wdc.WDDMservice
       com.trusteer.rooks.rooksd
       com.sonycorporation.BloggieInstallerAgent
       com.oracle.java.JavaUpdateHelper
       com.microsoft.office.licensing.helper
       com.cisco.anyconnect.vpnagentd
       com.bitdefender.upgrade
       com.bitdefender.AuthHelperTool
       com.adobe.fpsaud
    Extrinsic agents
       com.trusteer.rapport.rapportd
       com.sony.BloggieSoftware.AutoRun
       com.cisco.anyconnect.gui
       com.bitdefender.antivirusformac
       com.Livestation
       com.google.keystone.user.agent
       com.divx.agent.postinstall
       com.adobe.ARM.UUID
    launchd items
       /Library/LaunchAgents/com.bitdefender.antivirusformac.plist
        (com.bitdefender.antivirusformac)
       /Library/LaunchAgents/com.cisco.anyconnect.gui.plist
        (com.cisco.anyconnect.gui)
       /Library/LaunchAgents/com.sony.BloggieSoftware.AutoRun.plist
        (com.sony.BloggieSoftware.AutoRun)
       /Library/LaunchAgents/com.trusteer.rapport.rapportd.plist
        (com.trusteer.rapport.rapportd)
       /Library/LaunchDaemons/com.adobe.fpsaud.plist
        (com.adobe.fpsaud)
       /Library/LaunchDaemons/com.bitdefender.AuthHelperTool.plist
        (com.bitdefender.AuthHelperTool)
       /Library/LaunchDaemons/com.bitdefender.upgrade.plist
        (com.bitdefender.upgrade)
       /Library/LaunchDaemons/com.cisco.anyconnect.vpnagentd.plist
        (com.cisco.anyconnect.vpnagentd)
       /Library/LaunchDaemons/com.microsoft.office.licensing.helper.plist
        (com.microsoft.office.licensing.helper)
       /Library/LaunchDaemons/com.oracle.java.JavaUpdateHelper.plist
        (com.oracle.java.JavaUpdateHelper)
       /Library/LaunchDaemons/com.sonycorporation.BloggieInstallerAgent.plist
        (com.sonycorporation.BloggieInstallerAgent)
       /Library/LaunchDaemons/com.trusteer.rooks.rooksd.plist
        (com.trusteer.rooks.rooksd)
       /Library/LaunchDaemons/com.wdc.WDDMservice.plist
        (com.wdc.WDDMservice)
       /Library/LaunchDaemons/com.wdc.WDSmartWareServer.plist
        (com.wdc.WDSmartWareServer)
       Library/LaunchAgents/com.adobe.ARM.UUID.plist
        (com.adobe.ARM.UUID)
       Library/LaunchAgents/com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.UUID. plist
        (com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.UUID)
       Library/LaunchAgents/com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.UUID. plist
        (com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.UUID)
       Library/LaunchAgents/com.divx.agent.postinstall.plist
        (com.divx.agent.postinstall)
       Library/LaunchAgents/com.google.keystone.agent.plist
        (com.google.keystone.user.agent)
       Library/LaunchAgents/com.Livestation.plist
        (com.Livestation)
    Extrinsic loadable bundles
       /System/Library/Extensions/acsock.kext
        (com.cisco.kext.acsock)
       /System/Library/Extensions/BoulderScsi.kext
        (com.freecom.driver.BoulderScsi)
       /System/Library/Extensions/WD1394HPDriver.kext
        (com.wdc.driver.1394HP)
       /System/Library/Extensions/WDUSBHPDriver.kext
        (com.wdc.driver.USBHP)
       /Library/Audio/Plug-Ins/Components/Flip4Mac WMA Import.component
        (net.telestream.wmv.import)
       /Library/Internet Plug-Ins/AdobePDFViewer.plugin
        (com.adobe.acrobat.pdfviewer)
       /Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin
        (com.adobe.acrobat.pdfviewerNPAPI)
       /Library/Internet Plug-Ins/DivXBrowserPlugin.plugin
        (com.divx.DivXBrowserPlugin)
       /Library/Internet Plug-Ins/Flash Player.plugin
        (com.macromedia.Flash Player.plugin)
       /Library/Internet Plug-Ins/Flip4Mac WMV Plugin.plugin
        (net.telestream.wmv.plugin)
       /Library/Internet Plug-Ins/iPhotoPhotocast.plugin
        (com.apple.plugin.iPhotoPhotocast)
       /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
        (com.apple.java.JavaAppletPlugin)
       /Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
        (com.microsoft.sharepoint.browserplugin)
       /Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
        (com.microsoft.sharepoint.webkitplugin)
       /Library/Internet Plug-Ins/Silverlight.plugin
        (com.microsoft.SilverlightPlugin)
       /Library/Internet Plug-Ins/SonyOnlineMediaEngine.bundle
        (com.sony.sonyonlinemediaengine)
       /Library/Internet Plug-Ins/TVUPlugin.webplugin
        (com.tvunetworks.TVUPlugin)
       /Library/PreferencePanes/Flash Player.prefPane
        (com.adobe.flashplayerpreferences)
       /Library/PreferencePanes/Flip4Mac WMV.prefPane
        (net.telestream.wmv.prefpane)
       /Library/PreferencePanes/RapportPreferences.prefPane
        (com.trusteer.RapportPreferences)
       /Library/QuickTime/Flip4Mac WMV Advanced.component
        (net.telestream.wmv.advanced)
       /Library/QuickTime/Flip4Mac WMV Export.component
        (net.telestream.wmv.export)
       /Library/QuickTime/Flip4Mac WMV Import.component
        (net.telestream.wmv.import)
       /Library/Spotlight/GBSpotlightImporter.mdimporter
        (com.apple.garageband.spotlightimporter)
       Library/Address Book Plug-Ins/SkypeABDialer.bundle
        (com.skype.skypeabdialer)
       Library/Address Book Plug-Ins/SkypeABSMS.bundle
        (com.skype.skypeabsms)
    Extrinsic shared libraries
       /usr/lib/libgutenprint.2.dylib
       /usr/lib/sqlite/libtclsqlite3.0.dylib
    Global login items
       /Library/Application Support/WDSmartWare/WDQuickView.app
    User login items
       Dropbox.app
       GREEN BUTTON.app
       SpeechSynthesisServer.app
    Safari extensions
       Ghostery
       Facebook Disconnect
       Twitter Disconnect
       DivXHTML5
       TrafficLight
    Restricted user files: 21
    Font problems: 40
    Bad plists
       Library/Preferences/com.apple.iphotomosaic.plist
    Desktop file count: 25
    Elapsed time (s): 75

    Dear Linc,
    Thanks, once again, for repeating yourself by sending me the message above (a message you have sent to MANY users with this problem)!
    However, you give me this great opportunity to say two things:  1) YAHOO! I fixed the problem, and 2) I want to share how I did so because I hope it helps others.
    With the help of reading info at this website http://osxdaily.com/2011/09/22/fix-the-itunes-library-itl-cannot-be-read-version -error-when-downgrading-itunes/, I followed this procedure:
    1) I deleted the iTunes 12.0.1 app from my computer
    2) In addition, in reading related details at the website above (i.e., by clicking on links on the page AND scrolling to the very bottom to view links to related articles), in my iTunes library folder, I changed MY CURRENT "iTunes Library.itl" to "iTunes Library.old", as the website advises. The current .itl file was the one being used by the iTunes app I had just deleted from my computer.
    3) I went to the "Previous iTunes Libraries" folder and dragged a copy of the second-most recent .itl file to my desktop (for me, this file was "iTunes Library 2014-07-23.itl").
    4) I re-named it to "iTunes Library.itl"
    5) I then dragged a copy of the file in step #4 to my iTunes folder (the folder in which you now also have the "iTunes Library.old" file).
    6) I closed all remaining apps on my computer that were opened and I restarted it.
    7) Now, you don't have any iTunes app on your computer, so I downloaded a .dmg of iTunes 12.0.1.26 and installed the app (for example, you can download from here: http://www.macupdate.com/app/mac/5661/apple-itunes.
    8) Once installed, I opened iTunes and immediately I got the dialogue box, "updating iTunes library" -- THIS TOOK FOREVER AS I HAVE CLOSE TO 1,000 SONGS + OTHER ITEMS IN MY LIBRARY!
    9) I patiently waited until the library update completed, but it DID COMPLETE.
    10) Viola!  iTunes 12 is not "hanging" (or freezing) any longer.  I can navigate around the application.
    CAVEATS:
    1) Before I first deleted "the corrupted" iTunes 12, I was able to open the Preferences panel, go to "Devices", and check the box that stops the app from syncing with my iPhone.  This setting seemed to carry over; thus, I have not tried to sync yet…WISH ME LUCK!
    2) After going through steps 1-10 above, I didn't immediately have Internet Radio available in the application (i.e., I didn't see it), but it is now showing up and it works!  I just had to wait for a few minutes...
    3) I also use iTunes Match, but I haven't turned it on yet in the newly installed app. On the iTunes Match page, it says, "Add this computer" or "No thanks". So, the app is behaving as if I'm just beginning to use iTunes Match for the first time.  Later, I will click on "Add this computer", and I hope it goes smoothly!
    4) This isn't a caveat, but I think I should say: my iTunes library is on an external USB HD (I have to say THANK GOD for that). Obviously, this has implications for doing steps 2 to 5 above. The newly installed iTunes 12 app had no trouble in finding where my library is (I had it set up this way back when I was using iTunes 10).
    5) One last piece of advice: Make sure that when you plug your iPhone into any other computer only to re-charge but the iTunes app on that computer wants to sync with your phone, you DON'T let it sync.  First, you should go to Preferences in the iTunes app and click on "Devices". Then check the box that says, "Prevent iPods, iPhones,…….from syncing automatically."  After that, you would be able to plug in your iPhone to another computer to re-charge it.
    FINALLY:  I THANK EVERYONE WHO WAS WILLING TO SUGGEST SOLUTIONS TO ME REGARDING THIS PROBLEM!  I see that MANY users are having this difficulty, so I thought it would be fair for me to share how I resolved the issue -- my iTunes is running fine now...

  • I can't open mail on Hotmail from Firefox. I can from Safari. I can open the Hotmail account page and it is complete w/ my new messages, but when I go to open them I get this messeage..."Please refresh your browser window. When you access your Windows Liv

    I can't open mail on Hotmail from Firefox. I can from Safari. I can open the Hotmail account page and it is complete w/ my new messages, but when I go to open them I get this messeage..."Please refresh your browser window. When you access your Windows Live Hotmail account from more than one computer, we ask you to sign in again to help keep your account private and secure. " when I sign in again there is no change. in English
    == URL of affected sites ==
    http://http://sn135w.snt135.mail.live.com/default.aspx?n=2087215863
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

    "Clear the Cache": Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove the Cookies" from sites causing problems: Firefox > Preferences > Privacy > Cookies: "Show Cookies"
    See http://kb.mozillazine.org/Clearing_the_cache and http://kb.mozillazine.org/Cookies

  • I have an imac and macbook pro. my creative suite 5.5 design premium is on them both. I'm about to take them in to the apple store because they are running bad and have them completely restored to factory settings. when I get them back will i be able to r

    I have an imac and a macbook pro. my creative suite 5.5 design premium is on them both. I'm about to take them in to the apple store because they are running bad and have them completely restored to factory settings. when I get them back will i be able to re-install my adobe creative suite to both of my computers using my same product code from when i first bought it?

    Yes. Just make sure to deactivate the license on both systems using Apple menu --> Deactivate while one of the suite programs is running.
    Mylenium

  • When I try to restore my iPod, it stops restoring at the same place and doesn't work. How do I fix this and make it completely restore itself?

    When I try to restore my iPod, it stops restoring at the same place and doesn't work. How do I fix this and make it completely restore itself?

    Did you make sure that your security software allows iTunes to contact Apple during the restore process? http://support.apple.com/kb/TS3125

  • ALV Grid Control -  Modifiy data in total and subtotal lines

    Hello all,
    I´am creating a report using ALV Grid Control. This report calculates (using delivered and returned materials) for each vendor/material-combination the return quote.
    Using the totals and subtotals function for different characteristics I want to calculate the return quote for the selected characteristic. Example:
    Material delivered returned quote
    ..4711 . . . 500 . . . 5 . . . . 1 (=returned*100/delivered)
    ..4711 . . . 400 . . . 10 . . . . 2,5
    . SUM . . . 900 . . . 15 . . . . 3,5 <-- 3,5 is the sum but I want display the calculated value 1,667
    Is there a possibility to modify data in the total and subtotal lines.
    Thank you for your answer
    Best regards
    Thomas

    you said instead of 3.5 you want to show 1,667 ..
    how is it possible...
    3,5 become 1,667
    i thought you are doing any conversions...
    vijay

  • Field over flow can not display the total and subtotal in ALV

    hi
    i am running a z report with huge data in quality system.
    in 2 columns and not able to show the total and subtotal in 2 columns
    it says field overflow and cannot be dispayed.
    value is around 20character integer.

    You can create a domains with 20 positions and 2 decimal, for example.
    Than, associate this domain a data element.
    To finish assign that data element to the column you wanna sum.
    I hope help.

  • How to show the break totals and NOT the report totals in an SQL report

    APEX 4.0.1
    In an normal SQL report (Not interactive) with a break applied on the first column, how do you just show the break totals and NOT the extra full report totals?
    Next, Is it possible to display only some of the row totals and not for all columns that have the sum option checked against them?
    PaulP

    PaulP wrote:
    APEX 4.0.1
    In an normal SQL report (Not interactive) with a break applied on the first column, how do you just show the break totals and NOT the extra full report totals?Instead of using the APEX break feature, try doing all of this in the query using <tt>GROUPING SETS</tt> or <tt>ROLLUP</tt> to get the break rows, and <tt>GROUPING_ID</tt> in the <tt>HAVING</tt> clause to suppress the unwanted rows.
    Next, Is it possible to display only some of the row totals and not for all columns that have the sum option checked against them?Don't really understand what's meant here?

  • My Itunes update hung up and wouldn't complete. I had to power cycle the computer. Now Itunes will not open.

    My Itunes update hung up (for an hour) and wouldn't complete. I had to power cycle the computer. Now Itunes won't open / start.

    In iTunes go to the Edit menu, then preferences.  Click on the "Devices" tab. In there you will see a device backups section. If there is nothing there then you did not backup to your computer first.  It is also possible that you were backing up to iCloud before updating.  That is harder to check with an iPhone that is logged into your account.

  • TS2529 I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.

    I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.
    I have restarted the PC, the iphone, changed the lightining cable and nothign resolves it: backup never completes.

    Hi, I disabled the antivirus and the firewall. Same result
    I even deleted the backup folder inside C:\Users\...\Apple Computer\MobileSync\Backup to eliminate any corruption in the old backup files.
    Nothing changed: Session either times out or i get the same error message: itunes could not back up iphone because iphone disconnected. It always happens during step 3 out of 4 which is "transfering purchased apps from iphone to PC" and comes after step 2 which is backup.
    My iphone 5 is not jailbroken, and is a factory unlocked phone.
    Any other suggestion?
    Pls help

  • I tried synching my 2nd generation ipod touch and it told me to update the software. Then it said "error 37" and could not complete updating but it has left me with an ipod that is not recognised by my pc and wont turn on or anything- just black

    I tried synching my 2nd generation ipod touch and it told me to update the software. Then it said "error 37" and could not complete updating but it has left me with an ipod that is not recognised by my pc and wont turn on or anything- just black

    Error 20, 21, 34, 37: These errors typically occur when security software interferes with the restore and update process. If you are using a PC, follow this article to resolve this issue.
    Above from:
    http://support.apple.com/kb/TS3694
    You also may have to place the iPod in recovery mode. For how see:
    iPhone and iPod touch: Unable to update or restore

  • HT201210 i need help!??? i just tried to update my ipod and now its making me restore it on itunes and it wont complete the restoring process. Its giving the warning that the updated software server couldn't be reached. Can anybody help????

    i need help!??? i just tried to update my ipod and now its making me restore it on itunes and it wont complete the restoring process. Its giving the warning that the updated software server couldn't be reached. Can anybody help????

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem

  • My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?

    My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?

    Sounds like the battery is shot and in need of a replacement.  You can have Apple replace the battery for a flat fee or you can send it into a third party repair center for a bit less.
    Not much else you can do for troubleshooting this one.
    B-rock

  • HT4484 My email was phished, so I deleted it and changed it completely.  Now all the apps that I downloaded with the old email cannot update because I cannot log into that email.  Mountain Lion is compatible with the new updated iPhoto.  what can I do?

    My email address was phished and I had to delete it completely.  That was the one I used to download all my original apps on my computer.  I have since changed to a new address, but since my apps were under the old one, I cannot update them without logging into the old address.  It no longer exists....so how do I fix this? 
    Some of the apps I don't really care about updating but, I did download the new Mountain Lion and it wants to update my iphots and I can't do it.
    Any help will be appreciated!  Thanks!

    Hi joaroa,
    When you say you deleted your email and changed it completely, those are actually two different things, and it sounds like you are talking about your Apple ID, not just your email, (because you speak of making purchases with it).
    If you changed your Apple ID (preferred, How to change the name you use for your Apple ID), then you would not have another Apple ID and all of your purchases would still be with your only Apple ID, it would just be renamed to your new email address.
    If you instead created a new Apple ID (with a different email address) then of course you have two different Apple IDs and the old one still exists and is probably active. Just because you may not use an email address anymore, that doesn't mean an Apple ID of the same name is inactive, Apple IDs aren't deleted.  If you start purchasing Apps with your new Apple ID, it can really cause confusion because, as you see, you need to be logged into the Apple ID that purchased an App to update it. It would be best to stick with one Apple ID for purchases, probably the one you have spent the most money with.  Remember, unless it's an @mac or @me Apple ID you can rename them rather than creating yet another Apple ID.  Since Apple IDs can't be merged or deleted, creating more can be a messy.
    If you don't remember what the password is for a particular Apple ID, you can visit iforgot.apple.com where you can reset it, the AppleConnect password.  If the Apple ID is no longer a valid email address, you can use the security question method to reset the password instead.
    Unless you have made a lot of purchases with your new Apple ID, I'd recommend moving back into your old one, especially if that has the most or the most expensive apps with it.  If your new Apple ID is the "name/email" you want to use, you could rename the new one to a secondary email, then rename your old Apple ID to your preferred name/email.  Basically, rename the new one to something else which frees up that name (email) to rename your old Apple ID.  Thus your old Apple ID has the new name.  See My Apple ID.  The "Manage your account" link is where you can rename the ID itself.
    Sorry about getting long winded here, but it's important to keep as few Apple IDs as possible, at least when it comes to purchases.  If an Apple ID is undesired, rename it rather than creating a new one. It will be much simpler in the long run.
    Let us know how it goes.
    ivan

Maybe you are looking for

  • ADF mobile: how to link task flow to a list view item

    Hi I am trying to build a mobile app in adf and i created a popup on the left button on the header. this popup has a list view showing few options. now the requirement is to click on the option and navigate to that feature (which is created as a task

  • How to make the search box in 'mail' bigger

    HI all I use the mail programme in Lion and use a Mcabook pro, There is a search box in the upper right hand corner so you can search through your mails, I have accidently made it smaller and am looking to make the box bigger so I can see the full na

  • IMac G5 Sound Dropout

    Im having a very annoying problem with the sound output on my iMac frequently dropping out. Im using a USB Digidesign MBox 2 with speakers connected to it as my sound output and input device. Trouble is if im playing music in iTunes, or using another

  • JAI install PROBLEM...HELP HELP HELP

    I have jdk 6 update 16 and Im trying to install JAI 1.1.2 or 1.1.3 so I can use it in my programs. When I try to install it [jdk or jre of JAI] then I get a message: "The program requires the installation of Java 2 SDK version 1.3. Aborting Setup.".

  • Slowdown during upgrade

    Last Friday I purchased a 3Mb/s package from Verizon. This is a substantial upgrade from the 764 Kb/s connection I have had for the last 2 years or so. Ever since then I have had a horrible connection. My upgrade is still not complete (due Dec. 24th.