Percentage calculation in reprot painter
Friends,
When i am doing percentage calculation in report painter ex: A/B *100, it is giving rounded value like 28% instead of 28.5 or 28.6. Any idea where i need to make changes.
Points will be assigned
Thanks
Go to the Formatting-->Columns link in GRR2 screen. On the pop up screen maintain the decimal places you want.
Regards,
Vishal Thakur
Similar Messages
-
Percentage calculation in report painter
Friends,
How do we calculate percentage in report painter. I know we can do it using a formula. But when i give the formula as ex: A/B it is giving it as Zero. Do i need to do anything else? A is a subtotal of some accounts and B is a subtotal is some accounts.
Thanks in AdvanceHi,
For decimal places
select the column
go to formatting--> columns
in decimal places put 0.00
This will give u decimals
Points if useful
Regards,
Kiran -
Percentage Calculation in 11g Upgrade
upgradin to 11g issue in % cal
The issue is as follows
In 11g I'm calculating "ESS Rate" percenatge which is derived as below:
ESS Rate=(ESS count/count)*100
have casted ESS count as double and also "Count" as Int. Both the columns aggregate rule defined in the column formula is "sum"
Edited by: 982333 on Jan 16, 2013 3:12 PMFor more info on the columns values defined in column formula:
ESS Rate =100*CAST(sum(CASE WHEN "Pr Audit Setup Tax Fed Fact"."Audit Oprid Nm"="- Identity".Name THEN 1 ELSE 0 END) AS double)/CAST(count(IFNULL("Pr Audit Setup Tax Fed Fact"."Audit Oprid Nm", 'NA')) AS int)
Result obtained:
ESS RATE| ESS Count | Count
86.46% | 121 | 135
while a simple calculation using calculator would clearly give you (121/135)*100= 89.63% and not 86.46%
Can some one please help me in resolving this issue i do not see an reason for the wrong calculation of "ESS Rate" Percentage calculation. -
Percentage calculation on query designer (7.0)
Hi experts,
I´m new on Query designer (7.0) and I´m trying to do a finnancial report, so for the lines I create and structure using G/L accounts and in the columns I got the amount for each level in my structure for a month. Now I´m trying to create an Integration percentage, it specifies how high the percentage in a level is in relation to next higher level but so far I couldn't make it...
My report must seem like this:
Structure.............................Amount ...... Int %
1. Assets................................1000 ....... 100%
1.1 Current assets.................... 600 ....... 60% -> (600/1000)*100
- Cash............................. 300 ........ 50% -> (300/600)*100
- Inventories..................... 300 ........ 50% -> (300/600)*100
1.2 Long-term assets................ 400 ....... 40% -> (400/1000)*100
- Property, plant and eq..... 150 ....... 37.5% -> (150/400)*100
- Investment property......... 150 ....... 37.5% -> (150/400)*100
- Intangible assets..............100 ....... 25% -> (100/400)*100
I try to use each Percentage calculation options (%, %A, %CT,%GT, %RT) but it didn't work. Can anyone help me in creating a formula to get this percentage?
ThanksHi,
check this notes and links to get an overview how to use:
III. List Calculations (e.g.'Calculate result as..'):Interesting facts about the OLAP Processor/Analytic Engine
SAP Note Number: [1151957|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31313531393537%7d]
If, in a structure element (key figure ID), you use the 'Calculate Results as' and 'Calculate Single Value as' properties with their additional fields at the same time, priority problems occur and the system behavior is not immediately clear.:
Calculate Results/Single Values as ... priority rules
SAP Note Number: [853058 |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d383533303538%7d]
Regards
Andreas -
Percentage Calculation for result rows
Hi
I have problem with percentage calculation on result rows. I have 2 KFs A and B, the result is calulated by setting 'calculate result rows as' to 'summation'.
But in KF 'C' (which is calculated as A/B*100 ),
Now the probles is the systen picks up original values of A and B for calculation of C in result rows.
i.e. system picks up values of result rows for A and B for
setting 'calculate result rows as' to 'nothing defined'.
Any ideas on how to fix this.
Thanks
KarenKaren
I found something in Forum for you
Result Rows Calculation
Pradip's Solution should work. Try and if it is don't forget to award points.
Regs
Gopi -
Percentage calculation error?
Hi guys,
I must be missing something very basic - I can't get a simple percentage calculation to work in an applet:
float percentage = 0;
int amount,total;
amount = 4;
total = 10;
percentage = (float)((amount / total) * 100);
Instead of returning 40.0 in "percentage", this keeps returning 0.0...
What am I doing wrong? How do you calculate a percentage in Java?
Thanks!do the type casting of either of total or amount
Gaurav -
Percentage calculation according a result
Hi,
I have an issue with a percentage calculation in a query.
As rows I have Product Hierarchy 1, Product Hierarchy 2 and Material. I would like to show the sales for each material as a percentage of the result by Product Hierarchy 2 and in another colunm the percentage according the result by Product Hierarchy 1. I have used the option "Normalized according to the next level.." and it works to calculate the percentage according Product Hierarchy 2, but how can i manage to calculate the percentage according to Product Hierarchy 1( it is not the next level of the hierarchy, it would be the second next level)?
Thanks in advance.Hi ,
check this link ..
http://help.sap.com/saphelp_nw70/helpdata/EN/ee/37e80557494542806a38498d99a463/content.htm
Hope this helps ...
Regards,
Shikha -
Percentage calculation based on subtotal in webi 4.0
Hi Experts ,
How do i calculate the % column in webi 4.0 so that % would be calculated by the amount of Primary channel / Subtotal ) in one block.
=[Amount Of promary Channel]/Sum([Amount Of promary Channel]) In Block - not giving correct output.
Thanks,
RajibHi Rajib, As per my understanding, you want to show percentage on the base of subtotal.
that means if you set break on the Compony then percentage column should contain the percentage calculated on the basis of compony subtotal.
like this...(just one block of break)
then just use the simple percentage function ( =percentage(amount) ), this will automatically calculate the percentage based on subtotal.
and if you want to show 100% in subtotal row also then you can use formula= (amount/sum(amount)),
i think we dont need to use contex operator here.
formula for AHW total row = amount/sum(amount)
Let me know if this will help you,
Thanks,
Nitin -
Crystal report 2011 percentage calculation(Urgent)
All,
I am working on a report which looks like the below.
product>>>>>>> revenue>>>>>>>>> growth percentage
a >>>>>>>>>>> 12 >>>>>> >>>> 48%
b >>>>>>> >>>>>>>13 >>>>>>>> 52%
c >>>>>>>>>>>>> 14 >>>>>>>>>
d>>>>>>>>>>>>>> 16>>>>>>>>>>>>
total >>>>>>> 25 >>>>> 100%
my requirement is to calculate the individual growth percentage of a and b with the total revenue of a and b only.
to be more specific 12 divided by 25 and then 13 divided by 25.
i want these growth percentages in growth percentage column in my report.
I achieved the selective summation of revenue for a and b in the report footer but i am not able to use the total revenue 25 (that i get in the report footer) in the body of the report(detail section) for growth percentage calculation.
I tried using shared variables and global variables but of no use.i am not able to assign the grand total in the footer to a variable in the detail section in order to calculate the growth percentage.
Is there any easy work around to achieve this? need urgent help.
I also tried running totals and stuff but of no use.
Any help would be appreciated.
Reji.
Edited by: reji2011 on Jan 22, 2012 7:32 PMHi Reji,
I'm not sure how you've added 'a' and 'b', however, whatever way it would be, I'm sure it would be a print time formula.
Meaning it is calculated a later stage after all the records are printed. So, you would never be able to use a value in the Report Footer or any Footer to calculate against a detail section value and show the calculation on the detail section itself.
The way I see it, you would need to insert this report as a sub-report, just to calculate a + b, store this value in 'shared variable' and use it for calculations in the Main Report.
So, in the sub-report, where you have your formula that calculates the addition of a and b, just create a shared variable and assign this value to it.
Place the sub-report on the Report Header and in the Main report create a formula that calls the shared variable. You can then use this formula/variable in Main-report's calculations.
Hope this helps!
-Abhilash -
Can any one send me the program to create a calculator in screen painter.
Hi,
Check the Function module FITRV_CALCULATOR.
Using this you can get the idea of creating your own calculator.
Regards,
Sesh -
what is the reprot painter and report writer, between difference,?
http://www.sap-img.com/sap-fi.htm
<b>Report Painter</b>
Report Painter, How to reverse +/- signs
Library for Report Painter/Writer
Rept Painter, changing the tables assigned to libraries
Report Painter, Relationship with Rept Grps & Repts
Regards,
Rajesh Banka
Reward suitable points.
How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left. You also get a point yourself for rewarding (one per thread). -
Why I can not find the percentage calculation %ct
Hi,
I m trying to use the Percentage Calculation %ct for a calculated KeyFigure. There are only two Functions: % and %A
Can anyone explain why it is so?
thanks and regardsHi,
Percentage Variance (%)
<Operand1> % <Operand2>
This gives the percentage variance between operand 1 and operand 2.
Percentage Share (%A)
<Operand1> %A <Operand2>
This gives the percentage share of operand 1 and operand 2. It is identical to formula 100 * <Operand1> / abs(<Operand2>) , if <Operand2> is not equal to 0 and the character for u201CDivision by 0u201D if <Operand2> is equal to 0.
Use
You use the following percentage functions as operators when you define a formula or a calculated key figure.
Features
NULL values are displayed as empty cells, not as 0. For more information about when NULL values occur and how they are displayed, see Technical Notes About the Formula Operators.
Percentage Variance (%)
<Operand1> % <Operand2>
This gives the percentage variance between operand 1 and operand 2. It is identical to:
Formula 100 * (<Operand1> - <Operand2>) / abs(<Operand2>) , if <Operand2> is not equal to 0 and the character for u201CDivision by 0u201D if <Operand2> is equal to 0.
Plan Sales % Actual Sales specifies the percentage difference between the plan sales and the actual sales.
Percentage Share (%A)
<Operand1> %A <Operand2>
This gives the percentage share of operand 1 and operand 2. It is identical to formula 100 * <Operand1> / abs(<Operand2>) , if <Operand2> is not equal to 0 and the character for u201CDivision by 0u201D if <Operand2> is equal to 0.
Character for "Division by 0" :See SAP Reference IMG u2192 SAP Customizing Implementation Guide u2192 SAP NetWeaver u2192 Business Intelligence u2192 Settings for Reporting and Analysis u2192 General Settings for Reporting and Analysis u2192 Display of Numeric Values in the Business Explorer.
"Fixed costs" %A "costs" expresses the proportion of the total cost of a product that is the fixed cost.
Percentage Share of Result (%CT)
%CT <Operand>
This shows how high the percentage share is, with regard to the result. The result is the outcome of aggregating the second highest results level (interim result).
Use
You use the following percentage functions as operators when you define a formula or a calculated key figure.
Features
NULL values are displayed as empty cells, not as 0. For more information about when NULL values occur and how they are displayed, see Technical Notes About the Formula Operators.
Percentage Variance (%)
<Operand1> % <Operand2>
This gives the percentage variance between operand 1 and operand 2. It is identical to:
Formula 100 * (<Operand1> - <Operand2>) / abs(<Operand2>) , if <Operand2> is not equal to 0 and the character for u201CDivision by 0u201D if <Operand2> is equal to 0.
Plan Sales % Actual Sales specifies the percentage difference between the plan sales and the actual sales.
Percentage Share (%A)
<Operand1> %A <Operand2>
This gives the percentage share of operand 1 and operand 2. It is identical to formula 100 * <Operand1> / abs(<Operand2>) , if <Operand2> is not equal to 0 and the character for u201CDivision by 0u201D if <Operand2> is equal to 0.
Character for "Division by 0" :See SAP Reference IMG u2192 SAP Customizing Implementation Guide u2192 SAP NetWeaver u2192 Business Intelligence u2192 Settings for Reporting and Analysis u2192 General Settings for Reporting and Analysis u2192 Display of Numeric Values in the Business Explorer.
"Fixed costs" %A "costs" expresses the proportion of the total cost of a product that is the fixed cost.
Percentage Share of Result (%CT)
%CT <Operand>
This shows how high the percentage share is, with regard to the result. The result is the outcome of aggregating the second highest results level (interim result).
If a characteristic has been drilled down in both the rows and the columns, this reference is not unique. The system displays a warning and the relevant symbol for Data Does Not Exist. For more information, see SAP Reference IMG u2192 SAP Customizing Implementation Guide u2192 SAP NetWeaver u2192 Business Intelligence u2192 Settings for Reporting and Analysis u2192 General Settings for Reporting and Analysis u2192 Display of Numeric Values in the Business Explorer.
Percentage Share of Overall Result (%GT)
%GT <Operand>
This shows how high the percentage share is with regard to the overall result. The overall result is the outcome of aggregating the highest results level. Dynamic filters (filters that were not specified in the Query Designer) also play a role in calculating the overall result.
Percentage Share of Query Result (%RT)
%RT <Operand>
This is the same as %GT.
Unlike the process for calculating the overall result, dynamic filters are not used in the calculation of the query result. This means that the calculation always normalizes to the same value, irrespective of the filter status and the navigational state.
Reg
Pra -
Production system editing of overhead percentage calculation
Hi,
We want to maintain the overhead percentage calculation in the live
production system through the T.code S_ALR_87008275.when we want to
change the percentage the following message appers "Client has status
not modifiable". Without changing the client status we want to change
the percentage in the live production server. Kindly guide us in this
regards....
Regards
SyamkrishnanHi
Refer to SAP notes 372620,374609,356483, 135028 and 77430
This will help you in achieving the same.
Good Luck
Hari -
Percentage Calculation in Query
Hi Gurus,
Hope you are all doing good! I have an issue in my query. I have calculated the summation of Profit for 05 and 06 . In the properties these are the specification i have given :
1.Scaling Factor : 1,000,000
2.Number of Decimal Place : 0.0
3.Calculate Result As : Summation
I get the summation for both 05 and 06 correctly. I computed the percentage for
both and seems to be fine.
Formula used for computing percentage : ' / Profit 06' / ' / Profit 05' * 100
My issue being the Over all percentage seems to be high.
Any idea Gurus?
Points would be surely assigned.
Regards,
Sunitha.RHi Norris Silva,
As per your scenario total questions = 11
persons (c1, c2, c3, c4, c5) = 5
c1 answered questions = 5
c2 " " = 5
c3 " " = 1
here to calculate the percentage of answered questions
for each person. This can be calculated as below with use of
calculated key figure
c1's % ---> ci1 answered questions/total questions * 100
5/(551)*100= 45.45%
like write formula in calculated key figure for each person.
Hope it helps you...
Regards,
Ramki. -
Percentage calculation in pivot table per row
Hello all,
I do calculate two fields in a pivot table. First calculated field is the # of activities per user (standard SoD reporting field). Second calculated field is the # of activities per user with a certain classification (customized pick list field that is converted in a from a text value to a integer value ==> CASE WHEN Activity.Type = 'Call' THEN 1 ELSE 0 END).
In the pivot table I do show both vlaues as a sum. I would like to calculate the percentage per row per user.
Example:
User - # activities - # calls - percentage
User XY - 80 - 40 - 50%
Thanxs for your help
Elmarhave you # Call column look like
sum(CASE WHEN Activity.Type = 'Call' THEN 1 ELSE 0 END) -- column2
create the percentage column with # activities / column2
under the column property of the percentage column --> Data Format -->Treat Numbers As --> percentage.
leave the Aggregation Role as default on all columns.
Hopefully, I didn't miss anything.
Shilei
Maybe you are looking for
-
PI 7.0: IDOCs struck in IDX5 with error "Time Limit Exceeded".
Hi All, We have a File to IDOC scenario in PI 7.0. After mapping the IDOCs are posted from PI to ECC System. On a normal day this interface works good, yesterday we received a huge file which resulted in the creation of about 25000 IDOCs from one sin
-
hi, Good day to all! i created one vendor report but i need net balnce post date, debits , credits , balnce( debit-credit), net balance 01.01.2008, 2000, 1000 1000 02.01.2008 ,3000, 4000 -1000 03.01.2008 5000 2000 3000
-
IPhoto 09 on Snow Leopard: 100% CPU usage
Any explanation for this high CPU usage? Thanks
-
Hey, I am new to this can anyone help me configure tnsnames.ora file for connecting it with Toad. I have Oracle 10g. I have never done this before.
-
Hi i finally got the sensor for S60 v3....i cant remember where i got it from....if anyone wants it pm me