Percentage function in Bex?

Expert's,
There is % caluculation.But I am getting X for that calculation.Where as for other column I am getting correct value. what could be reason.
I have created formula.

"Please explain what is this formula collisions? "
Hi Vasu,
As Stefan and Oliver suggeted, have you checked the Formula Collision property of that KY. When you right click, and select properties, you'll see Formula Collision property. If you are using 7.0, for the KF, there is a tab for Extended ( on right side), there you'll see formula collision property. Formula Collision can happen, if you are one formula in teh calculation of another formula.
http://help.sap.com/saphelp_nw04s/helpdata/en/5b/30d43b0527a17be10000000a114084/frameset.htm
Hope this helps.

Similar Messages

How to use percentage functions in BEx with structures

Hi, I need a help.
I have a query with a structure in the rows: two characteristics at left then the structure.
Plant, Year/Month and a structure with 3 lines (Line A = movement type = 1, 2, 3, Line B types 4, 5, 6, Line C types 7, 8, 9).
In the rows just a quantity.
I'm trying to use percentage functions CT or GT in the rows, but it's not working.
The idea is something like:
Plant 01    07/2010   Line A    30 30%
                                 Line B    20 20%
                                 Line C    50 50%
                 Result                          33%
                 08/2010   Line A    40 20%
                                 Line B    60 30%
                                 Line C   100 50%
                 Result                          66%.
When I do not use the structure percentage function works well, but with the structure results are completely wrong.
Any help will be appreciated.
César Menezes

You either have to use exception aggregation to give you the total per plant and use that in your percentage calculation, or you could define a formula in the cells. Here you can reference the specific cells you want to use as inputs.

Percentage Function in BEx Formula

Hi matez,
I have defined a Formula as below :-
Operating EBITDA Margin = 'Operating EBITDA' / 'Operating Revenues'
How can I display this value as a <b>Percentage </b>???

Hello John...
Normally when u create a FORMULA it shows a Formula symbol but if u want the Description to show or Dispay
%EBITDA its just u have to type % in the Description....
Cheers
Preethu

Missing results when using percentage function %GT

Hi all,
I'm using the percentage function in BEx. As you can see in the left two columns, it works fine when the results are higher then 0,4. All the results less than 0,4 are set to 0. In the last column I calculated the results with an Excel formula.
Any Idea, what the problem can be?
4.392,080          1,5635 %          1,563481163
997,440          0,0000 %          0,355066085
4.761,680          1,6951 %          1,695050405
1.260,000          0,4485 %          0,448531508
469,600          0,0000 %          0,167166981
280.916,720     100,0000 %
280.916,720     100,0000 %
Many thanks in advance!

Dear Daya sagar,
Iam tried with taht functionality the query it self it is showing wrong and iam getting below error as result.
Diagnosis
The query contains a formula with the operator %RT. Therefore, the query cannot be released for OLE DB for OLAP.
The operators %GT, %RT, %CT, SUMGT, SUMRT, SUMCT and LEAF depend on the display of the list in the BEx Analyzer. If you used OLE DB for OLAP or MDX, this formula would deliver unexpected values.
Procedure
Do not release the query for OLE DB for OLAP, or do not use the operators %GT, %RT, %CT, SUMGT, SUMRT, SUMCT or LEAF. You may be able to achieve the desired result by selecting constants.
and report output is not coming.
Thanks & Regards,
Sathish

Percentage Function in a report

Hi,
I am new to BO and was trying to use percentage function. The function is working fine, but I have created a break on one dimension and hence the percentage is calculated according the break. I want to calculate the percentage for the entire data. I know I can remove the break and calculate it, but i do not want to remove the break. please let me know how do I do that.
Thanks,
MV

Hello,
You should be able to use the "in" operator, such as "in block" in your total formula to get this.
Thanks

Percentile & percentage function in SQL or PL/SQL ?

Hi all,
I was wondering if there is any
Percentile or percentage functions in SQL or PL/SQL to calculate ??
I came across percentile_rank , but i didnt find really good example online .... so i wasnt sure if thats right function for calculating percentile Any example will be great !!
THank you so much !!!

Thank you so much frank and tubby !! It just amazing to see so many powerful aggregate and anlytic functions are available in 11g.
Here is the example data i was working on
with x as (
select '100' value_amt, '6' cnt from dual union all
select '200' value_amt, '5' cnt from dual union all
select '500' value_amt, '10' cnt from dual union all
select '700' value_amt, '12' cnt from dual union all
select '900' value_amt, '14' cnt from dual )
select * from x;
I m trying to calucalte the column called "avg_value" by dividing " value_amt / cnt ". I was just wondering if i need to use any function to calculate
Here is the column "avg_value" look like
with y as (
select '100' value_amt, '6' cnt, '16' avg_value from dual union all
select '200' value_amt, '5' cnt, '40' avg_value from dual union all
select '500' value_amt, '10' cnt, '50' avg_value from dual union all
select '700' value_amt, '12' cnt, '58.33'avg_value from dual union all
select '900' value_amt, '14' cnt, '64.28' avg_value from dual )
select * from y;Thank you so much!! I really appriciate it !!

Error in Percentage function - %GT

Hi,
Im using Percentage function %GT like:
%GT 'Key Figure'
But when i execute my query i am getting below error:
Exception in BI runtime
The formula operation %GT is not allowed here (formula 488YAHA2EN2SD4JL3TM9LQDJI)
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
Query ZSD04_GRP_CONTRI could not be opened.
Log ID: 00144F2D7956005500000F09000006720004428E85AE70BD
Initial cause
Message:
Termination message sent ABEND BRAIN (429): The formula operation %GT is not allowed here (formula 488YAHA2EN2SD4JL3TM9LQDJI) MSGV1: %GT MSGV2: 488YAHA2EN2SD4JL3TM9LQDJI MSGV3: 482PMQCW7PKQWGESLYU7IA3V2
Im not getting whats the cause.
Help me in this regard.
Thanks !

You are trying to use Formula function %GT in CKF. First of all CKF is a global formula which will be used in all the queries where same infoprovider is used. So while creating CKF these formula functions like SUMCT, SUMGT, SUMRT, %GT, %RT and %CT are not available for CKF.
If you want to use these formula fucntions %GT ....then create local formula instead of creating CKF.
In short, Formula functions like SUMCT, SUMGT, SUMRT, %GT, %RT and %CT are created only locally.
Regards,
Mona
Edited by: Mona Kapur on Jan 5, 2008 4:54 AM

Error when executing Planning function in BEx Web

Hi everyone,
When executing a planning function in BEx Web, via Web Application Designer, I am getting the following error message.
ABEND BRAIN (178): Common entries are not permitted for plan queries and input queries
MSGV1: Aggregation level name
Where do I go wrong?
Thanks in advance, hope this is enough info.

Hi Geerts,
If i understood well, you have some problem with your query. Please check the query that you have on WAD and wich characteristics did you have on your level (the level on wich the query is based).
Pls, check the correct execution on that query on Query Designer too. That query is a plan query? it`s ready for input ?
Hope this help
Natalia.

%CT percentage function in Calculated Keyfigure missing

Hai,
I want to use the %CT percentage function in Calculated keyfigure.
But I can only find % and %A function under the PERCENTAGE FUNCTION. Am using BW 3.5. Why is it so?
Regards,
Neha Solanki

Hi neha,
This will be not available in CK's u have to use formula to get this.. Just try to create the Formula in the querry instead of CK...
Khaja

How to define Excel function using BEx formula

Hi experts,
May I know how to define the following Excel function using BEx formula?
IF(AND(Revenue<0,Cost<0),"N/A",(Profit/Lost/ABS(Revenue)))
Thanks!

for me its easy to implament logic with * and + rather than AND and OR respectively
((Revenue<0)(Cost<0))Value +((Revenue>0)(Cost>0)) ( Profit&Lost / ABS(Revenue))
As i have mentoned already,for Else case i have considered (Revenue>0) and (Cost>0) only.
Value can be a KeyFigure/Formula/formula variable/CKF/RKF
its not possible to type characters in the formula window so 'N/A'
Regards.
Message was edited by:
Murali c

Data functions in BEx

Hi all,
I am writing a query where I need the help of some data functions but cannot find them.
I have read about SUMCT<operand> and SUMGT<operand> and also percentage functions like %GT. All these are not available when i am trying to create a calculated key figure.
Please suggest me some alternative and if possible can I get these functions?
Thanks and warm regards,
SB

Hi Sharmishtha,
Hope you fine there.
when we are creating formula or CKF , On the right side of the screen, you see the functions that are available as operators:
○     Basic functions
○     Percentage functions
○     Data functions
○     Mathematical functions
○     Trigonometric functions
○     Boolean operators
With rgds,
Anil kumar Sharma .P

Break and Row syntax in Percentage function

Hi All,
I want to know how Break and Row syntax work in Percentage function. As shown in the attached image, I'm able to get results ONLY using Percentage function, and hence NO NEED to add the syntax Break or Row to the formula. Can someone please explain how Break and Row syntax work in Percentage function?
Basically, in the attached image =Percentage ([Actual Sales $]) can be used instead of =Percentage ([Actual Sales $]);Break) function. Likewise, =Percentage ([Actual Sales $]) can be used instead of =Percentage ([Actual Sales $]);Row) in the cross table. So why there's a syntax for Break and Row in the Percentage function?
Thanks,
Suranjith Fernando

Hi Suranjith ,
Each operator posses different behavior when we work with Cross tabs / sections / Breaks .
For ex:
In a cross tab : Find result
% =Percentage([G4];Col) ,Number format Percentage .
% =Percentage([G4])

Error while running IP function on BEx

Hello Experts,
I was trying to run Planning Function "Revaluation" from BEx work book with using BEx formula variable.
But I have get below error message:
*"An error occurred while communicating with the BI server"*
*"As a result of this error, the system has been disconnected from the BI server."*
*"Exception condition "INPUT_NOT_LEGAL" raised. "
My other functions and FOX are successfully running from BEx. And this specific revaluation function also runs on RSPLAN environment when I try to test under planning Sequence.
If any one has any idea about this error. I will be glad to get his/her opinion.
Thanks,
Ali

Hello Experts,
I was trying to run Planning Function "Revaluation" from BEx work book with using BEx formula variable.
But I have get below error message:
*"An error occurred while communicating with the BI server"*
*"As a result of this error, the system has been disconnected from the BI server."*
*"Exception condition "INPUT_NOT_LEGAL" raised. "
My other functions and FOX are successfully running from BEx. And this specific revaluation function also runs on RSPLAN environment when I try to test under planning Sequence.
If any one has any idea about this error. I will be glad to get his/her opinion.
Thanks,
Ali

IP Copy Function in BEX Analyzer

Hi All,
I have created copy function to copy A to B on a aggregation level for a input Query.,
Query is selected for version A. , however on my Bex workbook I have called this function to generated the data for B where Grid is filtered for Version A, and manual changes are captured.,After that when Iam creating Version B, system is complaining about
Value of the Characteristic 0version: B is not included in Selection -----Any Help gurus.,
I have in master data both A, B for 0version, and I have called standard copy function fields to be changed as 0version and gave from : A To B
Any help, I have created a variable also for B and passing it through command range, but still same information
Regards,
Vijayasri

Hi,
as the message says - B is not in your filter - so you need to check and change the filter you use.
Are you using a sequence - then include version B into the filter in the sequence.
are you using a function - what did you define in the workbook which filte rit should use?
regards
Cornelia

MAX( , ) function in BEx formula

Hello Experts!
Does anyone know, how the mathematical function MAX( , ) in BEx-formulas work? Which are the two parameters if i want to have the maximum of the values in one colum? Or does this function work another way?
Best Regards,
Peter

Hello Oscar!
Thank you for answer! Thats what I want to know but it doesn't solve my problem. If I use calculate result as maximum and if I want to calculate with this value (maximum) than i got a result which is calculated with the sum, not with the maximum which I see as result.
I do open a new thread for new question...
Thanks,
Peter

Percentage function in Bex?

Similar Messages

Maybe you are looking for