Percentage(%) missing when excute a bw query in WebI

Dear Experts,
Here I have a  BW query to be the source of the Universe, and then I build a query in WebI based on this universe.
What I have in the universe are:
1. Some key figures, Ex A,B,C
2. A structure which get from the bw query directly
and in the structure, I have two Seletctions, X, Y, and a Formula to calculate a ratio (X %A Y).
Then the difference between BW Query and WebI like following:
For example for key figure A: X=100, Y=200, then in BW Query I got:
=====X======= Y===== Ratio
A===100======200===50.00%
But in WebI, what I got are:
=====X======= Y===== Ratio
A===100======200===50.00
The "%" is gone, that's not what I want to have.
Please help, how to fix this issue.
Thank you very much,
Andy Hu
Edited by: AndyHu on Jul 1, 2010 8:30 AM
Edited by: AndyHu on Jul 1, 2010 8:30 AM

Hi Harry,
Thank you very much for your reply, and it works.
But here is one more question, after I change the fomat to #,##0.00%, the result is look like below:
=====X============= Y========Ratio
A===100.00%======200.00%===50.00%
I think that's may because X,Y and Ratio are combined into one Dimension(Struct.) as it is in the source BW Query,
so how can I just change the format of Ratio column?
Thanks,
Andy

Similar Messages

  • Error message when connecting to Bex Query in WebI

    Hi all,
    I've a Bex Query and I created a universe on top of that Query. I selected few characteristics and one keyfigure in WebI to build a report. When I ran the query I'm getting a error message as below :
    A database error occured. The database error text is: Failed to execute MDX Query. Reason : Error occured when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'. (WIS 10901)

    Hello John:
    I realize you are using webi, but a similar error is documented for Crystal Reports in the following KB:
    [1369523 - Crystal Reports and SAP BW -- 'Database Connector Error: BAPI Error #:0' |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333333363339333533323333%7D.do]
    See if the troubleshooting tip there helps.
    - Ludek

  • Urgent help needed: registry.dat is missing when i run my form in web base

    Hi gurus,
    i configured my forms and report server in windows 2003 and i received the following error msg when tryin to access my web base forms 6I.
    FRM-92129: Registry file http://domain.com/form60java/oracle/forms/registry/Registry.dat is missing.
    Details...
    Java Exception:
    oracle.forms.engine.RunformException: FRM-92120: Registry file http://domain.com/form60java/oracle/forms/registry/Registry.dat is missing.
    at oracle.forms.engine.Runform.initRegistry(Unknow Source)
    at oracle.forms.engine.Runform.startRegistry(Unknow Source)
    at oracle.forms.engine.Main.createRunform(Unknow Source)
    at oracle.forms.engine.Main.start(Unknow Source)
    at sun.applet.JinitAppletPanel.run(Compiled code)
    at java.lang.Tread.run(Thread.java:466)
    what can be goes wrong with my steps to receive the above error?? i tried in windows XP and Vista, and i getting the same error message as above.
    Your urgent help and advise is needed plssssssss.......
    Many thanks in advance.

    The URL doesn't seem correct: http://domain.com/form60java/oracle/forms/registry/Registry.dat
    I'm expecting a slash (/) between forms60 and java. Have a look in the formsweb.cfg if any paths are misconfigured.
    Also, try if the URL with the slash:
    http://domain.com/form60/java/oracle/forms/registry/Registry.dat
    does work when you just paste it in a browser. It should download the Registry.dat file

  • Error when i save the query

    Hi All
    I am adding CKF's to the columns in the Bex query, then after when I Check or Save the query it is throwing the error which i have no idea, did any one face this issue before?
    Error: [A299[Brain] Terminate: System error in program SAPLRRI2 and from CHECK_MAX_MEMBERS-01- (see long text)
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
    Thanks

    This looks like a bug. I will enter a bug report. Thanks, Laura.

  • Issue when using broadcaster in query desinger

    Hi All,
            we are having issues when we try to either distribute workbooks, it comes with a workbook page but nothing shows up on the page,samething when I try from
    query designer and try to publish it using broadcaster,the page does not show up anything.I am not sure why is it doing that.It was working before where it asked me onnce i distributed a workbook to make a new setting to broadcast the workbook.
    Your answere are greatly appreciated and will assign maximum points if it is solved.
    Regards
    Abyie

    Hi Gurus,
    I was able to sucessfully configure the Launch_Broadcaster. Now the broadcast settings in web template work same as the one when we launch the query to web from query designer(SEND, button function). However the broadcaster in web template(WAD) does not have XML(Ms Excel) output format. It has only MHTML, HTML, PDF & Online Link to Current Data.
    Is there a setting we need to perform in order to have XML(Excel) output format in WAD reports. Please advise.
    Thanks Much!

  • Variant for a query in Web

    HI,
    In my query I had a User entry Variable (Multiple Single Values) on 0DEPARTMENT.
    I had give a list of 2000 departments in a excel file.
    When I execute a query in WEB (7X Template) my requirement is to create a Variant so that if selected all the 2000 departments are included
    How can I paste all the 2000 values in the variable screen and save it as a variant
    Thanks

    Hi,
    For this you will need to create variant for the query in RSRT transaction. Just goto RSRT transaction. Provide the query name and click on Query Variants button. You will get a n option to create variant for the query. paste all the 2000 values for that particular variable of the query and save it as variant.
    Now when you will execute the query in the web you will get an option to select that variant from the query.
    Navesh

  • Initial selection screen missing when execting a query via web

    Hello all.
    We have a problem when we try to execute a query in web. We developped queries via query designer and we published all in a role. By doing it system generates a link that makes possible to execte this query via web. The issue is that sometimes the initial selection screen doesn´t appear (and the variables are "ready to input".
    Could anybody help me?
    Thanks in advance.

    Dear Carmen Rodríguez,
    In the WAD properties of the webtemplate.. carefully look for 'Force Variable Screen' Check that option..
    Save and rerun the same.. it should be able to see the screen after that..
    regards,
    Hari

  • CASE.. WHEN statement.. Query not working

    Hi,
    Can someone help me to correct the following code:
    select * from(
    select col1,col2,
    CASE
    WHEN
    Percentage >=75 THEN 'red'
    ELSE
    'green'
    end as color from (select
    ROUND(((COUNT(CASE WHEN class ='A' THEN 1 END)/
    nullif((SUM(CASE WHEN class ='B' THEN 1 END)+ SUM(CASE WHEN class ='C' THEN 1 END)),0))*100),1)) as Percentage, col4,col5
    from table
    group by class,col2
    order by class;P.S: Percentage is the alias for the complex query, I am using.... it is not the column name.
    Front end is APEX, once the code is syntactically correct, I can use it in APEX. So didn't post it in APEX forum.

    Hi,
    Emy_Jack wrote:
    I am sorry..
    OK the structure of the table is the following
    TABLE NAME: STATISTICS
    STRUCTURE:
    REGION VARCHAR2(50),
    COUNTRY VARCHAR2(50),
    SITE VARCHAR2(50),
    GROUP VARCHAR2(50),
    GROUP isn't the best name for a column; it will get mixed up with the keyword GROUP used in GROUP BY.
    Why not name your column something that is not an Oracle keyword, such as grp or stats_group?
    LANGUAGE VARCHAR2(50),
    PEOPLE VARCHAR2(50)Posting the table structure is better than nothing, but it would be even better to post a working CREATE TABLE statement, so the people who want to help you can re-create the problem for themselves, and test their ideas.
    So the query is:
    SELECT * FROM(
    SELECT REGION,COUNTRY,SITE,
    ROUND(((COUNT(CASE WHEN GROUP_FIRST ='A' THEN 1 END)/
    There's no column called group_<b>first</b> in the table structure you posted.
    NULLIF((SUM(CASE WHEN GROUP ='B' THEN 1 END)+
    SUM(CASE WHEN GROUP ='A' THEN 1 END)),0))*100),1)
    AS "PERCENTAGE",
    CASE
    WHEN
    "PERCENTAGE" >=75 THEN 'red'You can't define a column alias (such as percentage) and reference it in the same SELECT clause. In fact, the ORDER BY clause is the only place where you can use a column alias in the same sub-query where it was defined.
    If you define a column alais in a sub-query, then you can use it anywhere you want to in a super-query. In this query, do the GROUP BY and compute percentage in a sub-query, then compute color (referencing percentage) in the main query.
    ELSE
    'green'
    end "Color", group,peopleIf group and people are not in the GROUP BY clause, then you can't use them by themselves in the SELECT clause like this.
    FROM
    STATISTICS
    WHERE GROUP IN ('B','A')
    GROUP BY REGION,COUNTRY,SITE
    ORDER BY REGION,COUNTRY);ORDER BY in a sub-query is usually just a waste of resources. The order will not necessarily be preserved in the main result set. Don't use ORDER BY in the sub-query here, use it only in the main query.
    ERROR:
    ORA-00904: "PERCENTAGE": invalid identifier
    00904. 00000 -  "%s: invalid identifier"
    *Cause:   
    *Action:
    Error at Line: 8 Column: 5Edited by: Emy_Jack on Mar 16, 2013 3:06 AMAs an example of how to use a sub-query to define an alias:
    WITH     got_percentage     AS
         SELECT       region, country, site
         ,       AVG ( CASE
                             WHEN  group_first = 'A' THEN  100
                                                  ELSE    0
                         END
                    )          AS percentage
         FROM      statistics
         WHERE       group_first     IN ('A', 'B')
         GROUP BY  region, country, site
    SELECT       region, country, site
    ,       percentage          -- if wanted
    ,       CASE
               WHEN  percentage >= 75  THEN  'red'
                                               ELSE  'green'
           END          AS color
    FROM      got_percentage
    ORDER BY  region_country
    ;If you'd care to post CREATE TABLE and INSERT statements for a little sample data, and the results you want from that sample data, then I could test this.
    Edited by: Frank Kulash on Mar 16, 2013 7:17 AM
    Added query.

  • Datasources Missing when Installing Technical Content for BI Admin Cockpit

    Hi,
    I have installed the Technical Content for BI Admin Cockpit in our QA systems, for BI7, using SPRO, and it seems that there are some missing datasources, transfer rules, etc.,
    The one's that are missing are:
    => 0TCTPRCSVAR_TEXT
    => 0TCTPRCSVAR_ATTR
    => 0TCTBWOBJCT_TEXT
    => 0TCTBWOBJCT_ATTR
    Does anyone know if this is a known issue, that these are not available?
    Please let me know if they're required, and if there's a fix to get them back.
    Thanks,
    John

    Hi John,
    In my system the symptom is the same. So I just installed them myself in RSA1->BI Content.
    I don't think it's a big problem because the queries on the MultiProviders can run without these master data. For example, you may find the text of query is missing but you can see query's technical name.
    I remember when I activate 0TCTBWOBJCT_TEXT and 0TCTPRCSVAR_TEXT, these datasources are in BI 7 version but there's no transformation. So I create myself.
    Please let us know if you have other questions.
    Regards,
    Frank

  • Error when querying REST web services from web-based InfoPath form 2013 environment

    Error when querying REST web services from web-based InfoPath form 2013 environment, we are trying to consume REST web service in InfoPath form ( SharePoint 2013 version) 
    http://spapp/sites/litigation/Intake/_api/web/lists/getbytitle('Email%20Profiles')/items(1)
    it works in preview but does not when it is published. because of claim based authentication i m getting below error
    The form cannot run specified query, the underlying connection was closed. An expected error occurred 
    same works in 2010 environment .. are we missing anything in 2013 servers?? please let me know how we can resolve it.. thank you 
    guru

    everyone face this issue, nothing in event viewer, its easy to reproduce error at ur end also.. 
    just you need to use below web service in infopath and populate some data on form load like id = 1 pull the title and try to set in form any field...the
    list has one item thats all
    guru

  • Problem when trying to publish Query through BeX in Portal as iView

    Hi ,
    We are trying to publish BW 3.5 query in EP 6.0.
    when we are trying to publish the query as iView in portal, it gives the error message 'System Error'. The J2EE Error Log contains the following error :
    #1.5#001321FC0EDF001D0000000100000AF800042349427FEAFD#1164697462095#com.sap.security.core.server.jaas##com.sap.security.core.server.jaas#J2EE_GUEST#2##BID#AMARNATH_RR                     #6AA3FE0EADF14B2593F0019B1DB52607#SAPEngine_Application_Thread[impl:3]_17##0#0#Error##Java###Authentication stack: [].
    [EXCEPTION]
    #2#evaluate_assertion_ticket#javax.security.auth.callback.UnsupportedCallbackException:  Unsupported callback!
         at com.sap.engine.services.rfcengine.security.impl.RFCCallbackHandlerImpl.handle(RFCCallbackHandlerImpl.java:49)
         at javax.security.auth.login.LoginContext$5.run(LoginContext.java:812)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.login.LoginContext$SecureCallbackHandler.handle(LoginContext.java:808)
         at com.sap.security.core.server.jaas.EvaluateAssertionTicketLoginModule.removeSSOHeader(EvaluateAssertionTicketLoginModule.java:736)
         at com.sap.security.core.server.jaas.EvaluateAssertionTicketLoginModule.login(EvaluateAssertionTicketLoginModule.java:390)
         at com.sap.engine.services.security.login.ModulesProcessAction.run(ModulesProcessAction.java:69)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.services.security.login.FastLoginContext.login(FastLoginContext.java:154)
         at com.sap.engine.system.SystemLoginModule.login(SystemLoginModule.java:90)
         at sun.reflect.GeneratedMethodAccessor206.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at javax.security.auth.login.LoginContext.invoke(LoginContext.java:675)
         at javax.security.auth.login.LoginContext.access$000(LoginContext.java:129)
         at javax.security.auth.login.LoginContext$4.run(LoginContext.java:610)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.login.LoginContext.invokeModule(LoginContext.java:607)
         at javax.security.auth.login.LoginContext.login(LoginContext.java:534)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:60)
         at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113)
         at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    #1.5#001321FC0EDF00140000000600000AF800042349427FF32E#1164697462095#com.sap.engine.services.rfcengine##com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal()####BID#AMARNATH_RR                     #6AA3FE0EADF14B2593F0019B1DB52607#Thread[JCO.ServerThread-8,10,SAPEngine_System_Thread[impl:5]_Group]##0#0#Error##Plain###java.lang.RuntimeException: com.sap.engine.services.rfcengine.RFCException: Incoming call is not authorized#
    #1.5#001321FC0EDF00140000000700000AF800042349427FF40A#1164697462111#com.sap.engine.services.rfcengine##com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal()####BID#AMARNATH_RR                     #6AA3FE0EADF14B2593F0019B1DB52607#Thread[JCO.ServerThread-8,10,SAPEngine_System_Thread[impl:5]_Group]##0#0#Error##Plain###java.lang.RuntimeException: com.sap.engine.services.rfcengine.RFCException: Incoming call is not authorized
         at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:188)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Landscape:We have both BW 3.5 and EP 6.0, SP 16 on the same instance in
    same physical machine. EP 6.0 works on J2EE engine as an add-in installtion.
    Steps we followed for the integration of EP with BW:
    1)Create RFC Destination in J2EE Engine:
    Parameters:
    Program ID: xyz
    Gateway host: abc.ad.company.com
    Gateway service: sapgw00
    Application server host:abc.ad.company.com
    System number: 00
    Client: BID
    Language: EN
    User: sapjsf
    Password: ********
    2)Maintain RFC Destination for SAP EP 6.0
    Parameters:
    RFC destination: SAP_EP
    Connection type: T for TCP/IP connection
    Description: SAP EP RFC Destination
    Technical Settings:
    - Type of activation: Registered server program
    - Program ID: xyz
    - Gateway host: abc.ad.company.com
    - Gateway service: sapgw00
    Logon/Security:
    - Send SAP Logon Ticket: Activated
    Special Options:
    Unicode
    3)Maintain Portal Server Settings for SAP EP 6.0 in table RSPOR_T_PORTAL
    in BW 3.5
    RFC destination: SAP_EP
    System name: BIDEV
    Default: Checked
    Portal URL prefix: http://abc.ad.company.com:50000
    RM prefix for BW metadata: <empty>
    KM service URL: <empty>
    P.S.:We have maintained one more dummy entry as per the SAP Note 815044
    in the table RSPOR_T_PORTAL.
    4)Maintain Single Sign-On in SAP BW
    In transaction RZ10, We have maintained following settings:
    login/create_sso2_ticket=2
    login/accept_sso2_ticket=1
    5)Export BW Certificate to SAP BW and
    6)Import BW Certificate to SAP EP 6.0
    We have followed the above mentioned two steps.
    7)Create BW System in SAP EP 6.0
    Parameters:
    Log on methods: SAPLOGONTICKET
    We have created the BW system and the Connection test in WAS Connection
    is working fine.
    8)Configure User Management in SAP EP 6.0
    This step is not maintained as our scenario does not demand it.
    9)Export Portal Certificate to SAP EP 6.0 and
    10)Import Portal Certificate to SAP BW
    This step is also maintained as per Performance Assistant guidelines in
    SPRO.
    The user that we are trying to log into BeX Web Query Analyzer is
    Amarnath_rr who has 'SAP ALL' rights and the same user in EP is assigned'Super Admin' as well as 'Content Admin' role.
    Can anyone throw any light on wat the error might be??

    Ricky,
    a couple of clarifications :
    1. Does the report execute independently on the web - when you execute in Query view over IE or through a web template
    2. Check if SSO is properly configured - you can check if SSO is enabled by using TCode STRUST in BW. - the status of PSE should be Green.
    Arun
    Assign points if useful

  • Performance issues when creating a Report / Query in Discoverer

    Hi forum,
    Hope you are can help, it involves a performance issues when creating a Report / Query.
    I have a Discoverer Report that currently takes less than 5 seconds to run. After I add a condition to bring back Batch Status that = ‘Posted’ we cancelled the query after reaching 20 minutes as this is way too long. If I remove the condition the query time goes back to less than 5 seconds.
    Please see attached the SQL Inspector Plan:
    Before Condition
    SELECT STATEMENT
    SORT GROUP BY
    VIEW SYS
    SORT GROUP BY
    NESTED LOOPS OUTER
    NESTED LOOPS OUTER
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS OUTER
    NESTED LOOPS OUTER
    NESTED LOOPS
    NESTED LOOPS OUTER
    NESTED LOOPS OUTER
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    TABLE ACCESS BY INDEX ROWID GL.GL_CODE_COMBINATIONS
    AND-EQUAL
    INDEX RANGE SCAN GL.GL_CODE_COMBINATIONS_N2
    INDEX RANGE SCAN GL.GL_CODE_COMBINATIONS_N1
    TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES
    INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUES_N1
    TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUE_SETS
    INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUE_SETS_U1
    TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES_TL
    INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUES_TL_U1
    INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUE_NORM_HIER_U1
    TABLE ACCESS BY INDEX ROWID GL.GL_JE_LINES
    INDEX RANGE SCAN GL.GL_JE_LINES_N1
    INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
    INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
    TABLE ACCESS BY INDEX ROWID GL.GL_JE_HEADERS
    INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
    INDEX UNIQUE SCAN GL.GL_DAILY_CONVERSION_TYPES_U1
    TABLE ACCESS BY INDEX ROWID GL.GL_JE_SOURCES_TL
    INDEX UNIQUE SCAN GL.GL_JE_SOURCES_TL_U1
    INDEX UNIQUE SCAN GL.GL_JE_CATEGORIES_TL_U1
    INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
    INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
    INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
    INDEX UNIQUE SCAN GL.GL_BUDGET_VERSIONS_U1
    INDEX UNIQUE SCAN GL.GL_ENCUMBRANCE_TYPES_U1
    INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
    TABLE ACCESS BY INDEX ROWID GL.GL_JE_BATCHES
    INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
    INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
    INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
    TABLE ACCESS BY INDEX ROWID GL.GL_PERIODS
    INDEX RANGE SCAN GL.GL_PERIODS_U1
    After Condition
    SELECT STATEMENT
    SORT GROUP BY
    VIEW SYS
    SORT GROUP BY
    NESTED LOOPS
    NESTED LOOPS OUTER
    NESTED LOOPS OUTER
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS OUTER
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS OUTER
    NESTED LOOPS
    NESTED LOOPS OUTER
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS OUTER
    NESTED LOOPS
    TABLE ACCESS FULL GL.GL_JE_BATCHES
    INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
    INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
    TABLE ACCESS BY INDEX ROWID GL.GL_JE_HEADERS
    INDEX RANGE SCAN GL.GL_JE_HEADERS_N1
    INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
    INDEX UNIQUE SCAN GL.GL_ENCUMBRANCE_TYPES_U1
    INDEX UNIQUE SCAN GL.GL_DAILY_CONVERSION_TYPES_U1
    INDEX UNIQUE SCAN GL.GL_BUDGET_VERSIONS_U1
    TABLE ACCESS BY INDEX ROWID GL.GL_JE_SOURCES_TL
    INDEX UNIQUE SCAN GL.GL_JE_SOURCES_TL_U1
    INDEX UNIQUE SCAN GL.GL_JE_CATEGORIES_TL_U1
    INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
    TABLE ACCESS BY INDEX ROWID GL.GL_JE_LINES
    INDEX RANGE SCAN GL.GL_JE_LINES_U1
    INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
    TABLE ACCESS BY INDEX ROWID GL.GL_CODE_COMBINATIONS
    INDEX UNIQUE SCAN GL.GL_CODE_COMBINATIONS_U1
    TABLE ACCESS BY INDEX ROWID GL.GL_PERIODS
    INDEX RANGE SCAN GL.GL_PERIODS_U1
    TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES
    INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUES_N1
    INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUE_NORM_HIER_U1
    TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES_TL
    INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUES_TL_U1
    TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUE_SETS
    INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUE_SETS_U1
    INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
    INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
    INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
    Is there anything i can do in Discoverer Desktop / Administration to avoid this problem.
    Many thanks,
    Lance

    Hi Rod,
    I've tried the condition (Batch Status||'' = 'Posted') as you suggested, but the qeury time is still over 20 mins. To test i changed it to (Batch Status||'' = 'Unposted') and the query was returned within seconds again.
    I’ve been doing some more digging and have found the database view that is linked to the Journal Batches folder. See below.
    I think the problem is with the column using DECODE. When querying the column in TOAD the value of ‘P’ is returned. But in discoverer the condition is done on the value ‘Posted’. I’m not too sure how DECODE works, but think this could be the causing some sort of issue with Full Table Scans. How do we get around this?
    Lance
    DECODE( JOURNAL_BATCH1.STATUS,
    '+', 'Unable to validate or create CTA',
    '+*', 'Was unable to validate or create CTA',
    '-','Invalid or inactive rounding differences account in journal entry',
    '-*', 'Modified invalid or inactive rounding differences account in journal entry',
    '<', 'Showing sequence assignment failure',
    '<*', 'Was showing sequence assignment failure',
    '>', 'Showing cutoff rule violation',
    '>*', 'Was showing cutoff rule violation',
    'A', 'Journal batch failed funds reservation',
    'A*', 'Journal batch previously failed funds reservation',
    'AU', 'Showing batch with unopened period',
    'B', 'Showing batch control total violation',
    'B*', 'Was showing batch control total violation',
    'BF', 'Showing batch with frozen or inactive budget',
    'BU', 'Showing batch with unopened budget year',
    'C', 'Showing unopened reporting period',
    'C*', 'Was showing unopened reporting period',
    'D', 'Selected for posting to an unopened period',
    'D*', 'Was selected for posting to an unopened period',
    'E', 'Showing no journal entries for this batch',
    'E*', 'Was showing no journal entries for this batch',
    'EU', 'Showing batch with unopened encumbrance year',
    'F', 'Showing unopened reporting encumbrance year',
    'F*', 'Was showing unopened reporting encumbrance year',
    'G', 'Showing journal entry with invalid or inactive suspense account',
    'G*', 'Was showing journal entry with invalid or inactive suspense account',
    'H', 'Showing encumbrance journal entry with invalid or inactive reserve account',
    'H*', 'Was showing encumbrance journal entry with invalid or inactive reserve account',
    'I', 'In the process of being posted',
    'J', 'Showing journal control total violation',
    'J*', 'Was showing journal control total violation',
    'K', 'Showing unbalanced intercompany journal entry',
    'K*', 'Was showing unbalanced intercompany journal entry',
    'L', 'Showing unbalanced journal entry by account category',
    'L*', 'Was showing unbalanced journal entry by account category',
    'M', 'Showing multiple problems preventing posting of batch',
    'M*', 'Was showing multiple problems preventing posting of batch',
    'N', 'Journal produced error during intercompany balance processing',
    'N*', 'Journal produced error during intercompany balance processing',
    'O', 'Unable to convert amounts into reporting currency',
    'O*', 'Was unable to convert amounts into reporting currency',
    'P', 'Posted',
    'Q', 'Showing untaxed journal entry',
    'Q*', 'Was showing untaxed journal entry',
    'R', 'Showing unbalanced encumbrance entry without reserve account',
    'R*', 'Was showing unbalanced encumbrance entry without reserve account',
    'S', 'Already selected for posting',
    'T', 'Showing invalid period and conversion information for this batch',
    'T*', 'Was showing invalid period and conversion information for this batch',
    'U', 'Unposted',
    'V', 'Journal batch is unapproved',
    'V*', 'Journal batch was unapproved',
    'W', 'Showing an encumbrance journal entry with no encumbrance type',
    'W*', 'Was showing an encumbrance journal entry with no encumbrance type',
    'X', 'Showing an unbalanced journal entry but suspense not allowed',
    'X*', 'Was showing an unbalanced journal entry but suspense not allowed',
    'Z', 'Showing invalid journal entry lines or no journal entry lines',
    'Z*', 'Was showing invalid journal entry lines or no journal entry lines', NULL ),

  • In the report builder 6i when I choose the query  type as Express Query .....

    In the report builder 6i when I choose the query type as Express Query and go to next step where on pressing the connect button I am getting the following error.
    REP-6029 : Express error.
    How can I solve this problem ?
    Thanks
    Nanda Kishore

    DiId you download Oracle Reports Developer/Server Release 6i for Express, Files for Oracle8i for Windows NT from OTN?
    If so, could you provide me wih more information?
    Thanks
    Elaine

  • We've updated computers at the radio station...now missing an 'important' FX feature query

    Good Morning fellow users,
    We've updated our computers at the 6 radio stations I work for...all 6 production rooms and studios (for those not using VoxPro, myself included:)) to newer, core 'i' machines from the old school Pentium 4s we had which were on their last let (yet ran Audition 3.X) just fine. The newer machines are nice. They're signifcantly quicker chewing through mp3s, conversion betweeen and to different formats...but obviously, it's older softare that isn't able to take advantage of 64Bit or Multiple cores...so other than having a more reliable, speedier version...until we can convince the 'suits' to be that we need to bump up to the latest version, we'll be using said 3.X
    That said, one of the main features we've been unable to figure out how to get back to our defaut 'edit' screen is the little volume knob that pops up while a segment of the audio is selected. IE, you've clicked and dragged a portion of the existing audio in the edit screen to 'turn it white'. In the little area above selected audio file, in the 'white/selected' area....we (used to) have a small volume icon that allowed for automatic amplifcation with a simple click and drag of the mouse (either right or left for volume 'up or down'). It looks as though the engineer did re-image each machine with the corporate Audition disc---however, it's showing as Audition 3.0 in the "About Audition" tab under Help. Isn't or wasn't there an updated to at least 3.1 or 3.01?  Just wanted to double check as I run the 'new' Audition on my Macs for my home business--and I'm really enjoying it:)  However...3.X, IMHO is one of, if not THE Best Wave editor...for it's time, in the History of Wave/Simple editing and production on the run. Since the Syntrillium/Cool Edit days, I've used it (since transitioning from SAW in the mid 90's).  So it's been a bit tough to get acquainted with my Mac version....I just don't see the update happening in 'corporate' radio for some time. It took a whole lotta time, effort, and bureaucratic BS just to get the new hardware. We'll go to battle for the software in this year's budget (not to be distributed til next year---likely 3rd or 4th quarter:))....so must make do with the 3.X for now.
    Lastly, we're gettin a studder after a quick edit. Say I'm cutting a 30 second spot...4 or 5 seconds of dead handles, maybe a slip in the middle...total of 43 second sound file. I quickly cut the front handle, but left click dragging to the start, hit delete, hit space bar....studder, studder for about 2-3 seconds before it works itself out. Is there a cache setting I'm missing somewhere? If I go back and play from the beginning the file is just fine. No issues. Just that initial playback after edit. It's annoying but not a deal killer. Easily gotten used to. 
    In radio, as our jobs (and hats we wear) have become more and more "Life in the production room" producing for smaller markets, voice-tracking, commercial and audio produciton/voice over--again, for the smaller markets that these days are running 'jock-less'....Audition has easily become my number 1 tool in the box. Just a couple quirks I'd like to get worked out for the rest of our air/prod staff. I was, in fact, very happy with the older machines---each of our 'Workspaces' set up as we liked. Unfortunately, we ALL know how the engineers work. They get the new machines, pull the old, re-image and THEN send out that email. Ugghhhhh!  After almost 30 years in the buz, I sometimes miss when ALL they dealt with was RF and transmitters:)  We fixed our own 'work-stations' by writing out 3x5" index cards and bulk erasing carts, donuts (reels), and opening fresh, new vinyl from the labels:)
    Thanks for your time!
    Jer

    Thanks MusicConductor
    Have I in some way 'messed' with the RealTek driver by disabling sounds? After reading your reply I actually went and looked at the back panel of the computer. I was blown away...as you're correct, we are using the internal/stock sound card!  That's never been the case, as our engineer has always put a pro card---usually, if memory serves, a PCI/PCI-E Digigram card. However...with this new workstation he put in, he's utilizing the onboard, RealTek software/stock internal solution.  To date, it's worked well...however, Audition crashed last week and we had to do a full install of the program again yesterday. Cut both yesterday and today's shows and the stuttering is back. Sounds in Windows are 'off' and cache/buffer sizes have been increased. I'll continue to play this week...and I still have to update to 3.01 after the fatal error with the software last week.
    Thanks again...and if there's something I should not do with the Realtek software, can you be more specific?  I'm not sure I've messed with anything pertinent. We've got both ins and outs (from the sound card) separated into stereo RCA for both in and output. Sound quality seems to be just fine. (No noise/hiss or otherwise unnecessary or unwanted artifacts).  Maybe this is the issue. The onboard sound card. As I mentioned, in past systems we've used Lynx or Digigram pro cards. I'm kind of surprised to see us using the internal/stock card. As you say though, we've gone through some evolution with the isolation and performance of on board sound.  The RealTek driver version is 6.0.1.6392. One other question....in 'shared' mode...should I be running 24bit 48000Hz or 24bit 44100Hz?  Again...this is primarily used for saving down to MP3, transferring to our proprietary "Next Gen" system in generic MP3 flavor...so Next Gen can wrap it in it's own proprietary WAV format. In this case, is there a reason I shouldn't just be running it at 16bit 44100? In the control panel I have it set to 'No sounds' in sound scheme and in the lower "Program Events' box, I've selected '(None)'. Is this as 'deep' as I can get in the sound settings?
    Thanks again. This stuttering isn't normal...and with the inherent speed increase (CPU) and RAM update, as well as a speedier drive (7200rpm), I'm not sure the cause. The last and older system (Pentium IV) was also updated to Windows 7---so it did work fine with the current OS albeit on the older spec'ed machine.
    J

  • How to get cm:search to use the max attribute when creating the SQL query?

    When we use the max attribute in the cm:search tag, it does not seem to honor the max attribute when creating the SQL query. However, the result returned from the tag is limited to the number specified by the max attribute. Then the tag seems to work as intended, but the performance will be sub optimal when the SQL query returns unnecessary rows to the application.
    We use the cm:search tag to list the latest news (ordered by date), and with the current implementation we have to expect a decrease in performance over time as more news is published. But we can’t live with that. We need to do the constraint in the SQL query, not in the application.
    The sortBy attribute of cm:search is translated to “order by” in the SQL query, as expected.
    Is it possible to get cm:search to generate the SQL query with an addition of “where rownum <= maxRows”?

    Hi Erik,
    The behavior of a repository in regards to the search tag's max results parameter is dependent on the underlying repository's implementation. That said, the OOTB repository in WLP does augment the generated SQL to limit the number of rows returned from the database. This is done in the parsing logic. This behavior may differ with other repository implementations.
    -Ryan

Maybe you are looking for

  • Clicking noise from the screen moving

    My Phone is making a clicking noise on the right hand side of the screen, the movement of the screen cannot be seen but it can easily be felt. ive seen this as a problem before from other questions and how most cases have been sorted, however my phon

  • How to recover data in iPhoto?

    How to recover data from iphoto?

  • Whats the best tv to get for apple tv?

    What's the best TV to get for the apple TV's ?

  • How do I edit image metadata?

    What I would like to be able to do is something like:   tell application "Image Events"   tell pic     make new metadata tag with properties {name:"creation", value:cr}   end tell   end tell Only, sips/Image Events doesn't support setting most image

  • Making a webdynpro through Web Service| VERY URGENT

    Hi ,    I am having a problem in the scenario when I am trying to make a webdynpro application using a WSDL file . When I deploy the application in my first view which is a search view the field appears disabled and I am not able to input the values