Perception and Simulation of Intelligent Bahaviour Research Group

Hi Folks,
I would like to introduce to all the website of our research group 'Perception and Simulation of Intelligent Bahaviour Research Group' in Multimedia University in Malaysia. We specialize in the field of neural networks, artificial intelligence, data mining and music intelligence. We welcome new ideas and insights from others in the same field especially in those area of interest. The URL is:
www.psig.mmu.edu.my
We hold talks and we have a small list of publications. The group is still young, formed just in last year 2005. But we would appreciate very much to be able to be part of a larger international community in Artificial Intelligence. Feel free to browse our website. Thanks.
Best Wishes,
Yan

Funny you should ask... At about the same time that the Xserve was discontinued, we also lost our channel rep of nearly 14 years. Right now we are not sure who our rep is. I have however, sent this to as many people in Apple that I could think of. And I plan on continuing to reach out to as many as possible.
The sad reality is that this decision is impacting customer deployments and the future of customer installations. Apple strives for market share and loves to tout those numbers. But the numbers we fought for over these last eight years are going to disappear.
As much as this impacts our business, we are making up for it in enterprise deployment of systems. We will survive and lead in our geographic area. I do not fear that. But OS X Server is a UNIX server and with it has come all of the benefits of a UNIX system, including legitimacy in a data center. The Intel Xserve cemented this reality because of its hardware configuration and form factor. Yes, we have G4 and G5s still in service. But those are mostly in all Mac shops that understand the benefits and can work around the buzz word limitations. But fortune 100/500 IT departments did not really get on board until the release of the Intel server.
Still beating the drum to raise awareness. Spread the word and talk to your Apple reps.
Also, ask about the direction that Apple's Enterprise team is going. If the news I hear is correct, then our fears about all things pro and enterprise going away are likely true.

Similar Messages

Missing iviews for Personnel Cost Planning and Simulation

Hi, We are implementing "Personnel Cost Planning and Simulation" in R/3 version 5(mySAP ERP). At present we have the following Business packs in our Enterprise Portal Server. 60.1.5 and 60.1.1(mySAP ERP 2004). We uploaded both the BP's in our test environment to make sure we get all the iveiws that we need.
SAP presentation has all the iviews, But we are unable to locate/identify under MSS the iviews for "Web Based Detail Planning for Line Managers", "Detail Planning: Detail Costs per Cost Object" and so forth for Personnel Cost Planning and Simulation component.
We researched other BP's such as 50.4.5 and 50.3.9 but in vain.
We truly appreciate if some can guide us to get these iviews.

Finally I got the answer and thought I can share this with you all.....
For Personnel Cost Planning and Simulation, SAP has not delivered mss iViews, but SAP has realized the detail planning pages for the line manager and the personnel cost planner by using the Business Server Page (BSP) "hrhcp_planning".
You can find the description of it's usage in the online documentation under the following path:
Human Resources>Personnel Management>Personnel Cost Planning and Simulation-->Personnel Cost Planning and Simulation Flow -->Creating Personnel Cost Plans
--> Providing Detail Planning for Line Managers
--> Detail Planning by Line Managers
--> Detail Planning by the Personnel Cost Planner
If you wish to use the detail planning page in an mss environment, you can integrate the BSP as an external service into the manager's portal. Otherwise, you can also use it, by providing the URL to the managers.

Control design and simulation module

Hi,
I am new to Labview and i am trying to work on Control System design. I have downloaded and installed the Evaluation Module of Control Design and Simulation Module. The problem I am facing witht this is its not showing any control fuctions in functions Palette. While installing it said its installing only control design and simulation assistant. Please, can anyone help with this.
I am actually looking at this module to implement Sliding mode control for non linear systems. I would like to know if there are any examples to implement this??
Thank You.

Hello
The problem is the following. The version of LabVIEW that you are using does not match the version of the evaluation version of LabVIEW Control Design and Simulation Module (CD&SIM). If that happens, the installer will not select the support files for your LabVIEW. If you download LabVIEW 2011, then you must install CD&SIM 2011.
Now, the module in the current version does not have an example with sliding mode control. But using this module, you can easily implement the algorithms and simulation its result using the Control and Simulation Loop.
Hope this helps.
Barp - Control and Simulation Group - LabVIEW R&D - National Instruments

Can't install Control and Simulation Module in LABVIEW2009

HI all,
I m using LABVIEW2009 x64 and wanted to update control module in it.
when ever I try to install the Control DEsign and Simulation module, the setup won't proceed.
IT shows the following error message :
NI LabVIEW 2009 Control Design and Simulation Module
The Control Design and Simulation Module requires LabVIEW 2009 Full or Professional Development System to be installed.
however, I have already installed and reinstalled once as well. Please help me.

Hi Rishabh,
Unfortunately, we do not have a version of Control Design and Simulation for x64. You can try to install the 32-bit version of LabVIEW instead on a 64-bit OS. This should allow you to install CD&SIM.
Please let me know if can help any further.
Barp - Control and Simulation Group - LabVIEW R&D - National Instruments

LabVIEW Control Design and Simulation Module version 2013

I have had Labview downloaded for quite some time now. Downloaded control design and simulation module. Installed it. When i go to use it in the
functions menu, only the window appears. Opening it shows an empty window. I have attached a screenshot of the issue. Could someone please explain to me what the problem is and how I can go about fixing it?
Attachments:
Labview screenshot.docx ‏998 KB

As Altenback said, It is very possible it expired or it needs activation. To see for sure, go to your "NI License Manager" and expand the Modules. you should see:
If not green then you have to fix the license.
Barp - Control and Simulation Group - LabVIEW R&D - National Instruments

User awarness, perception and preference of platform as a service offering

Survey on user awarness, perception and preference of platform as a service offering
Dear Forum Members, I am an MSc. student at the university of Jyväskylä Finland who is interested in cloud technology. I am conducting a survey as part of my research work. Here under, is a link to the survey. It is pretty short and straight forward. I will be very grateful for your kind participation. Thank you very much.
Daniel.
http://www.surveymonkey.com/s/G32SF7B

This is how all criterias work in service manager. If the same property is included more than once it puts an OR inbetween. You would have to export the MP that contains the query result and edit the criteria manually to AND.
Cheers,
Anders Spælling
Senior Consultant
Blog:
Twitter: LinkedIn:
Please remember to 'Propose as answer' if you find a reply helpful

How to create a group and add class instances to that group using VSAE

how can i create a group in VSAE and add the objects to the group that too instances of a class.
should i use the ID of the object or some other rule to add members to that group
Thanks & Regards, Suresh Gaddam

Hi,
The below links should be helpful for you to create group in VSAE:
Computer and Instance Group Fragments in VSAE
http://blog.scomskills.com/create-a-computer-or-instance-group/
Create a Group of Health Service Watcher Objects Using VSAE
http://blog.scomskills.com/create-a-group-of-health-service-watcher-objects-using-vsae/
SCOM VSAE – Custom Dynamic Computer Groups Based On Server Registry Keys
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How to cancel email notification from snapshot and simulation

Hi,
We've activated workflow template WS28700001 so that email notification can be triggered when task release. Meanwhile we are using snapshot and simulation at the same time. But when saving sanpshot or simulation the tasks which have status of released also trigger email nofitication. How to cancel this notification of snapshot and simulation?
Regards.

Hi Ravi
I have added a Container Element(version) in workflow template WS28700001 and set a workflow start condition as follows.
&Task.Version& = ' '
Regards
Yemi

[JS InDesign CS3] Style groups, begone! (or: How do I take paragraph and character styles out of style groups?)

Sorry for this question (and my terrible English, by the way), I'm a javascript noob and I know when I've reached my limits.
Well, I'm trying to take a set of paragraph and character styles out of the style groups they are placed in, in hundreds of InDesign documents (that cannot be treated as a book). As far as I've tried (thanks to the invaluable help of previous posts in this forum) I've been able to move a style into a group and change it's position inside the group, inside the root level or even between groups. But it doesn't matter how I try, I don't know which move reference should I try in case I want to take every style out of their style group and place them after their original group folder, at the [Root] style level .
I have tried:
var doc=app.activeDocument;
var pGroups=doc.paragraphStyleGroups;
for (i=pGroups.length-1; i>=0; i--){
     var pStylesInGroup=pGroups[i].paragraphStyles;
     for (j=pStylesInGroup.length-1; j>=0; j--){
// Here I am, trying to move a style outside the folder that contains it, and failing miserably.
          pStylesInGroup[j].move (LocationOptions.after, pGroups[i]);
It didn't work, the script sent an invalid parameter value in the reference field, so I cant use the group folder itself as reference.
Tried other (obviously wrong) solutions, like use the first available style as reference. Therefore, my second script was
var doc=app.activeDocument;
var pStyles=doc.allParagraphStyles;
var pGroups=doc.paragraphStyleGroups;
for (i=pGroups.length-1; i>=0; i--){
     var pStylesInGroup=pGroups[i].paragraphStyles;
     for (j=pStylesInGroup.length-1; j>=0; j--){
// Now I try placing the styles after the [Basic Paragraph], that is, the second paragraph style in the document style list
          pStylesInGroup[j].move (LocationOptions.after, pStyles[1]);
It didn't work either, another invalid parameter in the reference field. Similar results with my other attempts (I even tried "[Root]" as literal with similar luck).
So, my question is: Which command (or script, in case my whole approach is utterly wrong) should I use to achieve my goal?
Thanks in advance to whoever decides to spend more than a minute thinking about my humble worries, and my apologies for shamelessly ripping some of your lines of code for my purposes.

Okay, tried a few things and got really weird results!
1. You can move a style around inside its group.
2. You can move a style out of a group "to" another, but it will appear 'inside' that style. I got my test style as a sub-item of [Basic Paragraph], using index #1. With index #0 ([No Paragraph Style]) InDesign crashed.
3. You can duplicate the style, but then you get a copy in the same group. Still no luck.
4. Finally! What is the parent of a paragraph style?
Document | Application | ParagraphStyleGroup
"Application" is easy -- that's when you make a style global. So what's the difference between 'Document' and 'paragraphStyleGroup'? Simple -- well, when you finally get it...
pStylesInGroup[j].move (LocationOptions.AT_END, doc);
moves the style out of the group and to the end of the list in the document. I don't think it's possible to move it directly to a specific position into the main style list -- you first have to move it out of a group, then move it around in its own list.
Fortunately, it returns its new position as a ParagraphStyle again, so if needed, you can use
newStyle = pStylesInGroup[j].move (LocationOptions.AT_END, doc);
newStyle.move (LocationOptions.AFTER, pStyles[1]);
-- I didn't really try that out, but it should work.

Does anyone know how to access the sound software on a Mid 2010 Mac Pro? I have a Logitech Z906 5.1 surround system with fiber optic in and out, I only seem to be able to get stereo and simulated 5.1 sound .

A mid 2010 Mac Pro, trying to get 5.1 surround out of the onboard sound software using fiber optic out connected to a Logitech Z906 5.1 speaker sys. with fiber optic in and out, all I get is stereo and simulated 5.1 sound out of the speakers. In utilities, Audio Midi Setup I can't get the Mac to see the Logitech speakers for 5.1 speaker configuration. Without being made to feel like a dummy, does anyone have a solution? Thanks, Carl

Hello John, I figured it was a signal issue. All the speakers fire and the sound is great. I was running the speakers thru a Dell PC with a Creative X-Fi Elite Pro, THX Certified, 7.1 soundcard using a fiber optic from the Mac Pro to the Z906's, it worked great until the Dell died!!! When I bought the soundcard from Creative I also bought the GigaWorks S750, THX Certified, 700 watt, 7.1 speaker system, used the speakers for 11 years and then the woofer/amp said "I QUIT" Creative quit making the speaker system and the sound card. The satellite speakers from the Creative GigaWorks speaker system still sound great (rated at 78 watt each) and are a little better speaker than the one's that came with the Z906 and the wattage from the 906 is sufficient to drive the satellites without any distortion. Thank you for addressing my issue, you confirmed what I suspected all along, just needed to hear it from someone with the same setup.
One last question, I purchased a Diamond Multimedia USB Soundcard, can't use the fiber optic(not supported by Mac) but the green, tan and black RCA's plug in and produces adequetly. When you plug your 906's into the Mac Pro using the fiber optic how do you set your speaker configuration? When I plug into the mac pro with fiber optic the 'Audio Midi Setup' does not seem to see the 5.1 configuration. Any thoughts there?
Carl

How to use Fuzzy Logic Controller for transfer function in labview control and simulation loop?

I am facing problem with fuzzy PD logic controller for transfer function in control and simulation loop.
Plz Help me in this regard...................
i have attache snapshot of my program
Attachments:
fuzzy in simulation loop.JPG ‏52 KB

Hi Sankhadip,
Sorry for the late response. I was looking at your code and
I noticed that the graph scale does not start from zero. That might be the
reason why you don't see the transient in the simulation. To change the scales
simply double click on the lower limit and set it to zero. If this is not the
expected results, can you please post the expected results, so we can see what are the
differences between the results . Also, you might be using different
solvers, and that gives different results as well.
Thanks and have a great day.
Esmail Hamdan | Applications Engineering | National
Instruments

I cannot send a message to a non-apple phone and an apple phone in a group message. Both of the names will turn green as though they are non-apple phones, even when one is an apple user.

I cannot send a message to a non-apple phone and an apple phone in a group message. Both of the names will turn green as though they are non-apple phones, even when one is an apple user. I am on iPhone 6. It also happens on my mom's iPhone 5s.

Send messages with your iPhone, iPad, or iPod touch - Apple Support
iOS: Troubleshooting Messages - Apple Support
Send a group message with your iPhone, iPad, or iPod touch - Apple Support

Is it possible to change the CATEGORY TITLE font color and/or size of each tile group in start screen, when the tiles are sorted by CATEGORY?

TIA.

Q. Is it possible to change the CATEGORY TITLE font color and/or size of each tile group in start screen, when the tiles are sorted by CATEGORY?
A. No
Carey Frisch

Implementation of state space model with constant disturbance in mathscript and simulation

I am new to LabVIEW and now I am doing a project realizing heater control in 8 rooms.
I have realized the state space model in the form x(k+1)=x(k)+u(k) using mathscript (using c_to_d) and feed it into control and simulation loop for simulation.
My problem is, in my project, I have to consider the disturbance from the other rooms. So the statespace model changed to be x(k+1)=x(k)+u(k)+E*d, where E is the matrix concerning the disturbance and d is the vector of disturbance. How could I implement the disturbance and discretize the new model in mathscript and which function to choose for the simulation. Discrete state space stochastic model?
Appreciate your kind help.

Hello, state space models in LabVIEW most of the time are being implemented by utilizing mathscript syntax
in addition with some functions of the LabVIEW Control Design and Simulation Module.
There´s a couple of nice tutorials for control design with these tools which I´d like to point you to as a first step.
http://www.ni.com/white-paper/6368/en/
http://www.ni.com/white-paper/6368/en/
http://www.ni.com/white-paper/6435/en/
http://home.hit.no/~hansha/documents/lab/Lab%20Work/MathScript/MathScript%20Lab%20-%20Part%20II.pdf
regards
Marco Brauner AES NIG

Using Gmail in iPhoto and cannot find any of my groups to email. I have at least seven or eight groups that I email, each containing over 50 addresses. Is there a way to locate my email groups using iPhoto to send out mail in Gmail? Using version 9.5.1

Using Gmail in iPhoto and cannot find any of my groups to email. I have at least seven or eight groups that I email, each containing over 50 addresses. Is there a way to locate my email groups using iPhoto to send out mail in Gmail? Using version 9.5.1 (902.17) OS is Mavericks 10.9.1.

Your question and description is not very clear to me, so hopefully something here will help:
1. Gmail is a service not an app or a place. So you need to access the service with an app - that can be iPhoto, Mail, Outlook or any other mail client, or even a Web Browser like Safari or Firefox.
So you can't "go to GMail" as you write, but instead you go to an application set up to use the GMail service.
2. iPhoto is not a mail client. It's a handy way to email pics to Grandma, but for what you're doing you need to use an app that supports all of the Gmail service. iPhoto doesn't. There is no way around that.
3. How to send to groups will vary depending on what app you use to access the GMail service. All of these apps can receive photos from iPhoto, either - as in the case of Mail and Outlook, via the Share function - or, in the case of all the rest - via a Media Browser.
For help sending to Groups using any of these other apps you need to ask omn their respective forums. But the workflow is quite simple:
Using Mail or Outlook set in the iPhoto Prefereneces:
1. Select the pic(s) you want to share.
2. Choose email from the Share function
3. Make your selections re size etc
4. The email opens up in Mail or Outlook
- from there you need to figure out how to use the email client.
Using any other app:
1. In the mail app create a new email
2. Click on the Attach button or link
3. Use the Media browser to select the pic(s) you want to send
4. Attach them
- from there you need to figure out how to use the email client.
For help accessing your photos in iPhoto see this user tip:
https://discussions.apple.com/docs/DOC-4491

Perception and Simulation of Intelligent Bahaviour Research Group

Similar Messages

Maybe you are looking for