PerDiems are not displayed in PR05 when the trip is being settled (ECC 5.0)

A trip is created with the below expenses  ( in the t code TRIP)
a) Air Ticket (Actual Epxneses) $160.00
b) Meals PerDiem: $50.00
c) ACcommodation PerDiem: $80.00
c) Other Expenses: $35.00
Total expenses in the trip are : $325.00 which is correctly saved.
But when it is to be settled in PR05, the Perdiems are not being displayed - do I need to any thing in configuration for this?
Regards

Hi Sue
Thanks for the reply Sue, unfortunately it didn't work. After clicking elipses I am not getting column i wanted but it got added with EXECUTE and EXISTS, exp(n).
But still i got cannot get the column in the drop down list.
can you please help me out.
Thanks
Surendra

Similar Messages

  • Some of my emails are not displaying images. When I click within the email, the webpage is the same. How can this be fixed?

    I use hotmail and the problem only happens with certain emails, like Homedepot and Redbox. Within the email, it states "Having trouble viewing this email? Click here.", but when I click this, the same problem persists, no images displayed. These are the only two I have noticed that are not displaying the images. Please help. Thanks

        Hello riopeltravel, let's solve this mystery! What make & model phone do you have? Also, have you tried deleting the email account off of the phone and re-adding with the username and password? How long have the email accounts stopped working? Keep us posted!
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • Html emails are not displaying. they just show the code. text emails don't display at all. what's up?

    suddenly today my email won't display properly. html emails just display the actual html code instead of a graphic display. Text emails just show a blank page. I have changed the View setting to show messages as original html, simple html and plain text. None of the settings restores things. All these emails were viewable properly yesterday.
    Anyone got any ideas as to what's up?

    sounds like your index and the data are out of synch. Often the result of anti virus activity either blocking the update of the index or quarantining the whole inbox so there is no mail left to display.
    Right click the folder, select properties and then the repair button.

  • Adobe Bridge CC Smart Collections are not displaying all images in the folder

    I'm having an issue with Bridge CC were I setup a smart collection to monitor my new photos. The folder contains over 300 photos, but is only displaying 160. The only condition I set is to have a minium file size of 10kb, so it should bring in all files since most are over 4mb. At first I thought it was a problem with the files themselves (permissions or something) but if I open the folder in bridge it easily displays all of the images easily. Any ideas?

    I'm having an issue with Bridge CC were I setup a smart collection to monitor my new photos.
    You might want to describe this workflow a bit more. Do you create this from an existing folder or are you adding new photo's?
    A Smart Collection does not refreshes it self automatically. You either have to use the edit icon top right of the content panel to save again or deselect and select the collection itself to let it refresh the content.

  • Some of my photos are not displayed in events. The event is there and still named but photos won't display. Suggestions?

    Some of my photos are suddenly not showing inside the event. The event is still present as well as the title and number of photos in the event, but the photo is not showing. I get a black thumbnail with a dashed white box inside it. Any suggestions? It has not happened in all events, only a handful.
    Thanks

    That's an indication that the link/file path to the original file has been broken.  Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

  • Menu toolbar icons not displayed in colour when deployed on the Web

    Hello!
    We are developing an application using Forms6i on Windows NT.
    Our problem is that menu toolbar icons are not displayed in colour when the application is deployed on the Web using lookAndFeel = generic. This is the case both when using Microsoft IE5 and Netscape 4.5. When lookAndFeel = oracle, however, the icons are displayed in colour.
    The icons are stored as *.gif files in the same directory as the application *.html file. It does not help to create a virtual path /web_icons/ in the www listener and edit the parameter default.icons.iconpath in the file Registry.dat.
    When running the application as client/server, the menu toolbar icons are displayed in colour as expected.
    Any ideas on how to solve this problem?
    Regards,
    Kjell Pedersen
    Nera SatCom AS
    Norway
    null

    Hi,
    I got the same problem and I didn't figure out, how to solve this problem.
    But did you try to printout the form anyway? I guess you will see the icons on the printout, won't you?
    Regards
    Dirk

  • HT201250 The back ups are not displaying when i enter the time machine

    I'm trying to restore my files to my new MacBook I just purchased. I have the external hard drive connected and entered the Time Machine. But, the back-ups are not displayed "in pink on the right side" as indicated in the directions. I do see the back up folders when I open up the hard drive using Finder.  Any ideas on how I can restore my files?
    Thanks

    You should be using Setup Assistant to import your data, as detailed here:
    OSX Tips: Setting-up a new Mac from an old one, its backups, or a PC Using Setup Assistant on Lion

  • Groups are not displaying in the user's member of tab

    Hi ,
    We have a issue,
    After mapping any AD  group in CMC,the groups and users are displaying  in the cmc list. but when we go to the properties of the user and member of option ,the groups are not displaying .
    After restarting the CMS every thing works fine.
    Every time after adding a new user we should restart the CMS, it is very difficult for  us as number of users are working on this .
    We are using number of AD groups.
    Is there any resolution for this with out restarting the  CMS.
    Thank you  in advance.
    Environment -
    BO XI3.1,
    LDAP authentication.
    Thanks & Regards,
    Collin.

    The LDAP graph is responsible for showing the membership when viewing the user properties, an issue like this would indicate the graph is not auto updating. It normally builds when starting the CMS then every 15 minutes or so for new users (depending on system activity). It shouldn't lose any info (if it does this indicates a caching or communication problem with AD). There is a graphtimeout setting in the registry (search SAP notes) if this were disabled then it may cause similar symptoms.
    I'm not aware of any bugs in 3.1 causing this behavior so you may need to open a case with support (authentication team) to help troubleshoot.
    Regards,
    Tim

  • Warning messages are not displayed in confirmation

    Hi,
    We are working with SRM 5.0 classic scenario. Our issue is warning messages are not displayed whenever we press the CONFIRM or DELETE button in the confirmation, however warning messages are displayed if we press CHECK button in the confirmation.
    Please suggest the solution to display the warning messages while clicking CONFIRM or DELETE button in the confirmation.
    Thank you
    Natarajan

    Hi Muthu,
    Thanks for your reply. We raised the OSS message for this issue. As per  the standard system behaviour, warning messages will not be diplayed when " DLETETE" button pressed.
    In the DELETE mode, the system will display only the first EXPRESS
    ERROR message and not WARNING messages.
    Inorder to maintain an error message as EXPRESS, the FIELD_NAME
    (i.e ls_message-field_name) has to be assigned with the value
    EXPRESS.
    For example,
    ls_message-msgty = 'E'.
    ls_message-msgid = 'ZF'.
    ls_message-msgno = '000'.
    ls_message-field_name = 'EXPRESS'
    Kindly note that in the DELETE mode, the system does not display
    EXPRESS message with msgty = 'W'.
    Only EXPRESS message with msgty = 'E' is recognised and displayed.
    The Warning messages will be displayed only during the CHECK mode.
    Thank You
    Natarajan

  • Calender's Left Arrow & Right Arrow are not displaying.

    Hi All,
    My issue is in the calender of WebUI, to see the last month we click Left Arrow and for next mont we click on the Right Arrow ,these arrows are not displaying but that shows the Cross mark in the place of the arrows.When we click on the Cross Mark that the functionality is working.( I had already checked with the default skin in the personalize settings of WebUI),still the issue is there.
    In the development system  it's fine but we are getting the problem is in  the Quality system.
    Regards,
    Venkatabharath Voona
    Edited by: venkatabharathv on Jun 15, 2011 2:48 PM

    answered

  • Buttons are not displayed for the first time when drawImage method is used

    Hi
    In my swing window 2 buttons are there and when clicking these buttons, it should display an image . The two buttons are displayed at the first time and I can click on it . While clicking a button , the corresponding image is also got displayed. [ I am using drawImage() function for it] But what the problem is, then the two buttons are not displayed and it will be displayed again when the mouse moves along the position of these two buttons. And this problem occurs only at the first time..When they are on the window on a second time, they won't vanish when the image is displayed when clicking it. Is this the problem with paint() method?. I am using start() method also.
    Please help me!
    Thank You

    Hi
    This is not my exact program, that has a large no: of code. So I am putting here a sample one. One thing I would like to point out is that , I can see the buttons at the time of loading the applet and suddenly it vanishes and the image is drawn. Then if I move the mouse along the position of these buttons , they got displayed.
    import java.awt.*;
    import javax.swing.*;
    /*<applet code = MyClass width = 500 height = 500>
    </applet>
    public class MyClass extends JApplet
    Image img;
    JButton b1,b2;
    Container cp;
    Canvas1 cv;
    class Canvas1 extends JPanel
    public void paint(Graphics g)
    super.paint(g);
    g.setColor(Color.black);
    g.fillRect(0,0,500,500);
    img = getImage(getCodeBase(),"image1.jpeg");
    g.drawImage(img,20,20,this);
    public void start()
    cv = new Canvas1();
    cv.setBounds(0,0,500,500);
    cp.add(cv);
    public void init()
    setLayout(null);
    cp = getContentPane();
    b1 = new JButton("Button1");
    b1.setBounds(1,1,100,30);
    cp.add(b1);
    b2 = new JButton("Button2");
    b2.setBounds(200,1,100,30);
    cp.add(b2);
    It would be very helpful to me if you could fix the problem.
    Thank You.

  • Chinese characters are not displayed in the Firefox bookmarks

    Chinese characters are not displayed in the Firefox bookmarks. The name looks like e.g. "??????? ???? cn.nytimes.com"
    Chinese character of the site name is displayed ok in the head of the browser window and there is no problem reading chinese web content. I use Firefox Portable 11 /English from portableapps.com in Windows XP.
    I googled and got some tips:
    1) Set your browser to recognise Chinese language internet sites.
    Windows users: Under "Tools - Options" on your browser's menu-bar add Chinese to the languages list.
    - I did this.
    2) Set your browser's "Character Set" or "Encoding" to UTF-8 (sometimes also called Universal Alphabet or Unicode).
    Encoding settings can be changed under the "View" option in your browser's menu-bar.
    - It was already set to UTF-8.
    3) Windows users: If Chinese text still does not display correctly, East Asian language support may need to be enabled.
    - This has been done when I installed Windows.
    I still don't get any Chinese fonts in the bookmark names. I can edit the bookmark name with chinese characters and then save the bookmark, it works fine. But why does not Firefox recognize the characters when saving bookmarks? Help is appreciated.

    No I didn't change anything deep beneath the hood. My problem didn't apply to the URL, but to the name of the link or bookmark header or whatever you would like to call it. (When hitting Ctrl + D there is a Name field). I only got ???????? instead of chinese characters in the name. Also for e.g. www.cntv.cn ...but maybe all China is not in the whitelist either. ;-) But anyway, this was not the real problem for me.
    Apparently I was wrong as after a reboot of the computer it worked. The solution seemed to be to add Chinese to the language list. I don't know why it was not enough to restart Firefox?
    Now I only have problems to show chinese characters in the name field of my external link manager... But I guess it is not an issue for Mozilla.

  • The Forms are not displaying correctly

    the Forms are not displaying correctly. Editing mode and printing mode are missing contents of notes/text field (Additional Notes, Background or Need, Project Summary). Second issue is when viewing/printing a Project Profile - Short Form, the text fields
    are shrink, they are not displayed full high to show all the text. It was working with IE9, IE10, but now IE10 and IE11 dont work.

    tested with Google Chrome and that seems to work the best in terms of viewing and printing the forms.
    Then you could try spoofing Google Chrome using a User-Agent string override and Document mode Edge.  Or open  IECompatData.xml  to see if you should have Compatibility View enabling Microsoft's list.  Or report your problem symptom and
    desired override here:
    http://www.modern.ie/report-compat-problem
    Ref:
    http://msdn.microsoft.com/en-us/library/gg699485(v=VS.85).aspx
    Robert Aldwinckle

  • Leading zeros are not displaying in the excel

    Hi Experts,
    Leading zeros are not displaying in the excel
    Here is the situation:
    I have developed one report, which will create the file in Application server with TAB deleimeted. After that I am sending that file via email in the excel format using Email functionality FM.
    Normally our material numbers will start with zeros.
    But when I check the email excel file , leading zeros are not displaying.
    Even I checked the application server (AL11) file, zeros are there.
    I thought program FM was wrong and I tried it manually by downloading the file into excel. Eventhough it is suppressing zeros.
    Could you please advise, how to display leading zeros to the material number in excel file.
    Thanks in advance
    Raghu

    Application server file showing  zeros infront of the material number.
    1200#  0012401387# XXXXXXXX
    Once file created in app server, I am using one custom FM to send that output in excel format / txt format via email.
    when I send txt file via email, I am getting leading zeros. But when I send xls file via email, I am not getting zeros.
    I checked custom FUNCTION MODULE . No mistakes in that.
    ===
    Sudhir,
    As you said, I passed ( ' ) single quote infront of the material number. When I check the excel file, single quote also displaying like this '0000100.
    Application server file showing like below
    1200#  '0012401387# XXXXXXXX
    ===
    Could you please advise anyone how can we acheive this.
    Thanks

  • CIN: Items are not displayed while updating the RG1 Register using T Code:

    Hi Experts,
    Items are not displayed while updating the RG1 Register using T Code: J1I5.
    System is not showing any error message.
    Can any one explain to update the RG1 Register?
    Thanks
    Chandra

    Hi,
    dont go the table again and again . the table is updated at intial stage only for stock update but not when SAP is running.
    In day to day bussiness the flow is as follows:
    Production - MB31 - to Unres stock
    Sales - VL02n - PGI - to customer - i.e out of unres stock
    Every day u can run TC J1i5 once in a day as decided and update the register so all transactions which have happend in that day gets updated i.e both input and output.
    and this will happen every day.
    hence dont use table as it is only for intial data upload i.e just before golive.
    Hope i am clear.
    krishna

Maybe you are looking for