Perfmon counter list empty

Something happened and now when i open perfmon and when i want to add a counter whole list is empty. If i do perfmon /sys it opens up perfmon with all those counters but if i want to add 1 more list is empty again.
I can't find the reason why the counters are not displaying. They are all enabled from what i see (C:\Windows\system32>lodctr /q). I also tried repair but that
did not help. 
Anyone has any idea?

Found the problem. When Cold Fusion Application server counters are enabled then i am not able to add new counters (list is empty). Once i disabled those counters and rebooted server everything works.

Similar Messages

  • Manually schedulled cycle count items are not coming in cycle count listing

    We had scheduled some items for manual cycle counting for particular date. But those are not getting generated in cycle count listing report or not avialble for counting.
    Checkpoints done: 1. Items are cycle count enabled
    2. Those items are avialable in that Cycle count  Name
    3. Onhand is avialbe for those items in particular subinventory
    4. Cycle count scope is specific to Subinventory and that sub inv is included in the list
    Can anyone give some thoughts why those manually schedulelled items are still not getting in cycle count listing report?
    Thanks in Advance
    Avinash

    Hi Avinash,
    Can you please let us know, are you using the CC with ABC analysis?
    Thanks
    NS

  • Cycle count listing Report not generating out put

    Hi Team ,
    We are into 11.5.10.2 , We have set Auto schedule to weekly in cycle counts and cycle count is not generating output for cycle count listing in Production.
    But, we are able to generate report output in Test instance and unable to generate in Production . We tried testing with same login in Production and Test Instance .
    Please advice
    Thanks
    Kiran

    Also please confirm that the CC calendar and other CC related setups are exactly same from the PROD and TEST instances.
    Also make sure that you are running the report for the same INV org.. as there is no Input parameter for the Org in the report input but it picks from the MFG_ORG_ID profile value, which gets assigned when you loginto the responsibility.. You can confirm the selection by Chane Instance Org and select the Inv org and then run the report..

  • Smartform for output type CHKL (count list ) as Inbound Delivery(E1)

    At this moment, I know the Sapscript form RT_CHECK_LIST & program RTCHECKL for count list (output type CHKL) as inbound delivery (E1), but I need  the PROGRAM and SMARTFORM for this output?!
    Thanks in advanced

    I don't think we have a similar print program and smartform available, if you want to use it in Smartfrom.. copy SAPscript and migrate to smartform using SF_migrate and copy the print program of SAPscript and make necessary changes.
    Regards,
    SaiRam

  • Regarding MSExchange Active Manager perfmon counter for exchange server 2010 sp1

    Hi
    Instance for MSExchange Active Manager perfmon counter is not created on Exchange Server 2010 SP1 but for MSExchange Active Manager Client and MSExchange  Active Manager Server instances are created.
    Will any can tell me why i am not getting any instance for MSExchange  Active Manager  on Exchange Server 2010 SP1.
    Thanks
    Sandeep Gupta
    Sandeep Gupta

    We are getting the below error on HUB/CAS server past 4 days continuosly.
    Event ID- 106
    Source - MSExchange Common
    Description -
    Performance counter updating error. Counter name is Unique servers queried, category name is MSExchange Active Manager Client. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not
    a custom counter, it has to be initialized as ReadOnly. at System.Diagnostics.PerformanceCounter.Initialize() at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value) at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
    Last worker process info : System.ArgumentException: Process with an Id of 5264 is not running. at System.Diagnostics.Process.GetProcessById(Int32 processId, String machineName) at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
    Processes running while Performance counter failed to update: 984 svchost 2952 rotatelogs 2360 conhost 6296 WmiPrvSE 1372 NSClient++ 564 lsass 8036 powershell 2944 cmd 2352 cmd 1896 exfba 25748 conhost 7076 store 2936 rotatelogs 372 csrss 10024 fscvsswriter
    1552 rotatelogs 8436 MSExchangeTransport 2928 cmd 4304 msexchangerepl 1544 FSCMonitor 164 svchost 556 services 6264 beremote 2524 Exclaimer.Connectors.MailRules.ExchangeUpdateService 1108 bedbg 4492 FSCController 748 svchost 4964 WmiPrvSE 9972 svchost 4484
    MSExchangeMailboxReplication 1724 inetinfo 5872 MSExchangeTransportLogSearch 2116 cpqnimgt 34620 conhost 5660 MSExchangeThrottling 7432 FSCScheduledScanner 4720 WmiPrvSE 928 svchost 1852 WmiPrvSE 1516 FSCEventing 1980 SMSvcHost 11804 svchost 3876 Microsoft.Exchange.EdgeSyncSvc
    5252 Microsoft.Exchange.Search.ExSearch 10176 w3wp 1704 hpwmistor 9764 svchost 2684 Microsoft.Exchange.AntispamUpdateSvc 516 winlogon 10956 MonitoringHost 2088 svchost 2480 conhost 9852 FSEMailPickup 2280 cqmgstor 1884 cmd 1684 sysdown 1288 vcagent 672 svchost
    1088 svchost 8572 FSCTransportScanner 6404 w3wp 4236 FSCTransportScanner 11936 MonitoringHost 8568 conhost 2460 rotatelogs 4428 Microsoft.Exchange.RpcClientAccess.Service 880 svchost 4716 Microsoft.Exchange.Pop3 7376 FSCRealtimeScanner 480 svchost 8556 EdgeTransport
    4024 MsExchangeFDS 2248 cqmgserv 840 svchost 276 smss 1260 w3wp 9728 svchost 7328 FSCRealtimeScanner 3028 hpsmhd 4080 FSCConfigurationServer 34088 TrustedInstaller 8088 w3wp 1052 spoolsv 1248 cpqrcmc 4836 conhost 9320 w3wp 7544 taskeng 5376 Microsoft.Exchange.ServiceHost
    1632 svchost 1628 snmp 7536 FSCRealtimeScanner 836 FSCTransportScanner 1032 conhost 1228 cissesrv 8712 FSCTransportScanner 15700 cmd 436 wininit 828 LogonUI 1812 smhstart 2400 hpsmhd 428 csrss 21176 w3wp 13032 Microsoft.Exchange.Monitoring 6520 mad 4800 MSExchangeMailSubmission
    4360 Microsoft.Exchange.Pop3Service 8944 FSEContentScanner64 1932 msftesql 6324 w3wp 4216 cqmghost 572 lsm 8764 powershell 1592 HealthService 4152 MSExchangeMailboxAssistants 2304 Exclaimer.PolicyProcessingEngine.RemoteDeploymentService 9944 svchost 2572 Microsoft.Exchange.AddressBook.Service
    2492 cmd 1388 Exclaimer.PolicyProcessingEngine.ConfigurationService 1780 MSExchangeADTopologyService 4536 Microsoft.Exchange.ProtectedServiceHost 4 System 11844 msdtc 7488 FSCRealtimeScanner 7520 WmiPrvSE 0 Idle Performance Counters Layout information: FileMappingNotFoundException
    for category MSExchange Active Manager Client : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name : Global\netfxcustomperfcounters.1.0msexchange active manager client at Microsoft.Exchange.Diagnostics.FileMapping.OpenFileMapping(String
    name, Boolean writable) at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable) at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable) at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String
    categoryName)
    Same error is coming for diffrent performance counter as well like ..MSExchange Throttling, MSExchange Middle-Tier Storage, MSExchange ResourceHealth.
    Could some one help me on the same.
    Above steps can be follow to avoid this error???
    Thanks in Advance.

  • No recipient specified - is the distribution list empty?

    Hi All,
    When I am trying to send a mail to the internet mail id using System->Short message....it throws a message like...
    "No recipient specified - is the distribution list empty?"
    Please help me...

    That's even stranger. I used that FM 5 minutes ago with this data, in se37, and I received the email.
    I_TITLE                                   TESTE                           
    I_SENDER                              <my work email>         
    I_RECIPIENT                           <my personal email>
    I_FLG_COMMIT                       X                               
    I_FLG_SEND_IMMEDIATELY   X                                                                               
    Tables                         Value
    I_TAB_LINES                        1 Entrada                     (TESTE written in row 1)
    See if you have your SMTP node of SAPConnect well configured.
    Regards.
    Valter Oliveira.

  • DHCP client list empty on WRT310N

    This has happened all 3 times I reset my router to default settings.  I see the list of clients, no problem.  However, when I adjust the QoS for my desktop's MAC address, the client list empties, and from that point on, it stays empty, although 3+ clients are connected.  Removing any QoS settings won't alleviate my problem, either.  I have to reset to factory defaults again. 

    Have you tried to upgrade the firmware of your Linksys Router. If not then Go to website linksysbycisco.com/downloads.. .......insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop...
    Follow these steps to upgrade the firmware on the device : -
    Open an Internet Explorer browser page on a computer hard wired to the router...
    In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
    Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
    Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Now reset your router :
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

  • 1280 dial call list empty and 2 strange sign ???

    1280 dial call list empty and 2 strange sign ???
    Already Tried
    full flash
    full reset
    write pm
    self test
    any solution plz
    also tell me about these 2 sign
    Attachments:
    1280unknownsign.png ‏162 KB
    dialempty.png ‏151 KB

    The second sign is of headset connected. If it is present without any headset connected then contact Nokia Care. The first sign is not that clear. Is it a lock? Also sice when is the dialled number shown as empty? If its recent you will have to contact Nokia care as you've done all that can be done by a user.
    Please mark the post as solution if it solves your problem.
    Current Device - Nokia Lumia 1020/920

  • Quick Exchange 2010 Perfmon Counter question

    So in the following article:
    http://technet.microsoft.com/en-us/library/ee832791.aspx
    Under the section where it speaks about calculating your IOPS per Mailbox Server is says to track the Perfmon Counter "MSExchange Database ==>
    Instances ->Database Maintenance IO Reads/sec" to use in your calculations.
    My issue is that I don't see that counter at all when pulling counters from my Exchange 2010 mailbox servers.  I have "Database Maintenance
    Duration" and "Database Maintenance Pages Bad Checksums" but no "Database Maintenance IO Reads/sec" under "MSExchange
    Database ==> Instances"
    Am I looking in the wrong spot? 
    Exchange 2010 SP2

    Hi
    Sorry, this link was kept in my Favorite years ago, I did not notice it had be removed.
    After researching, I found
    "It is no longer necessary to pick the correct counters for the Exchange Server Roles that are installed as this script will automatically detect the roles installed and will add the appropriate counters for each role detected."
    http://archive.msdn.microsoft.com/ExPerfwiz
    So on that link, you can ExPerfWiz, it is a powershell based script to help automate the collection of performance data on Exchange 2007 and Exchange 2010 servers, you can download from here
    http://archive.msdn.microsoft.com/ExPerfwiz/Release/ProjectReleases.aspx?ReleaseId=5859
    Hope that could help
    Cheers
    Zi Feng
    TechNet Community Support

  • Bt phone 2.1 all call lists empty for past 10 days...

    I have no record of any calls for past 10 days -all calls  etc message says "all call list empty" yet i know people have called.I am told it is a software problem-my current software version is v1935i006f007 Type A.What is going on

    I have had this happen twice - the main screen shows missed calls but when you look at calls list it is empty. Same software version as you. The only way I have found to get it back to normal is to reset the phone.
    Peter

  • Message Monitor List Empty

    Hello All,
    Working on MII12.1.6 Build 96, NW7.1 SP03
    With my user name, I'm logging to MII on 2 different workstations, at the same time.
    1st one is showing the messages received on the defined listeners in the Message Monitor.
    2nd one showing "No data was found in result" ..
    On the two stations we have the same browser versions, same JRE level, same everything (standard clean setup).
    Anybody seen this happening before? What are your suggestions for the steps I should take to display the messages received by MII in the Message Monitor on both workstations using the default search pattern (i.e. all messages on all listeners, all types of message statuses)?
    many thanks,
    paul.

    Hi Paul,
    we have experienced something similar (empty Message Monitor list). It was due to different language settings in the NetWeaver UME user setting and the browser. Maybe you check if the language settings of the workstations and are different.
    Michael

  • Js link - Display group count list SharePoint 2013

     
    I have a list column name "category" with values like Completed, Not Completed, Started.
    I want to group list items based on category.  I want to format it without showing all the list items so that it should look like:
        Completed : 45
        Not Completed : 30
        Started : 20
    I am using Js link functionality on the list webpart to achieve it.
      (function () {
        var itemCtx = {};
        itemCtx.Templates = {};
        itemCtx.Templates.Group = GroupOverride;
        SPClientTemplates.TemplateManager.RegisterTemplateOverrides(itemCtx);
        function GroupOverride(Ctx, group, groupId, listItem, listSchema, level, expand) {
        return '<div style="font-weight:bold; display: inline-block;">' + listItem[group] + ' ::'  + '<div><ul>'+ listItem[group].Count + '</ul></div>' + '</div>';
    By using above code, I am able to show category names but not the count (listItem[group].Count is throwing error). Any idea how to achieve it?
        Completed : 
        Not Completed :
        Started : 
                 

    Hi,
    According to your description, you might want to change the format of the list view to display without list items.
    I would suggest you debug the script in browser to watch if
    listItem[group] object contains a valid Count property.
    About how to debug JavaScript using IE Developer Tool:
    https://msdn.microsoft.com/en-us/library/ie/bg182326(v=vs.85)
    If your requirement is to display something like a static HTML table, an alternative way is that you can apply custom CSS to the page to hide the unwanted elements.
    Here is a working demo will display the list view in a similar format as you want:
    <style type="text/css">
    .ms-gb
    border-bottom: none !important;
    .ms-gb a, .ms-gb2 a
    display: none !important;
    thead
    display: none !important;
    </style>
    Thanks
    Patrick Liang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
    contact [email protected]
    Patrick Liang
    TechNet Community Support

  • Drop Down List empty when user trying to create a Shopping Cart.

    Hi,
        While Creating a Shopping cart.User is unable to select a vendor or a category from the drop down list,As the Drop down list is empty.I have Checked The Extended Attributes Tab for the user in PPOMA_BBP tcode.Are There any other configurations to be checked.
    Appreciate your inputs!!
    Thanks
    Rakesh.

    Hi Muthu,
                 Thanks For your reply.The User is trying to create a Shopping cart,Whilst creating it he is trying to select a Vendor from the Drop downlist.But the drop down list is showing up empty values.The User is unable to pass the vendor to the shopping cart from the drop down list.
    Thanks
    Rakesh.

  • Additional Installers List empty

    Hi there
    Best regards
    chris
    CL(A)Dly bending G-Force with LabVIEW
    famous last words: "oh my god, it is full of stars!"
    Solved!
    Go to Solution.

    You're right!
    What happened to the text .....?
    Here it is:
    Once again the list of "Additional Installers" at my installer build specification is empty (has been discussed here several times). I'd like to try the reg files mentioned here:
    http://digital.ni.com/public.nsf/allkb/1B53A6FDFC20B8058625752400687F42
    mdffix.reg
    mdffix_vista.reg
    My IT won't let me open or download these file. Can someone please post their content here?
    Thanks in advance
    Chris
    Best regards
    chris
    CL(A)Dly bending G-Force with LabVIEW
    famous last words: "oh my god, it is full of stars!"

  • Password Manager List empty

    Has anyone seen this one....noticed password longon wasn't working ...went to password manager file and it was completely empty. holy c#$%.  Hoping that it is still there somewhere and not linked?

    I have this problem and I am trying not to panic - we're talking about a list a mile long that is totally GONE.
    I tried reboot... twice...nothing comes back. 
    I have a fingerprint sensor that allows me access the first time i go to a page that requires a login... from there, the password manager opens w/out the sensor everytime i go to a login page.
    Where can I recover the list?

Maybe you are looking for