Perfmon : counter types for CCM 5.0

Hello,
I'd to have the counter types for all CCM 5.0 counters and I did not find any calls in the wsdl or documentation about the types returned by the Cisco Soap engine.
Under CCM 4.x, the Win32 perfmon API used to returned the type for each counter...
Thanks
Seb

The .cop files are like the .exe files in Windows. Therefore you shouldn't need the .cop file in this case. You should just be able to copy the .bin file to the server in the tftp folder and make the change under the device defaults and restart the tftp service.

Similar Messages

  • Regarding MSExchange Active Manager perfmon counter for exchange server 2010 sp1

    Hi
    Instance for MSExchange Active Manager perfmon counter is not created on Exchange Server 2010 SP1 but for MSExchange Active Manager Client and MSExchange  Active Manager Server instances are created.
    Will any can tell me why i am not getting any instance for MSExchange  Active Manager  on Exchange Server 2010 SP1.
    Thanks
    Sandeep Gupta
    Sandeep Gupta

    We are getting the below error on HUB/CAS server past 4 days continuosly.
    Event ID- 106
    Source - MSExchange Common
    Description -
    Performance counter updating error. Counter name is Unique servers queried, category name is MSExchange Active Manager Client. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not
    a custom counter, it has to be initialized as ReadOnly. at System.Diagnostics.PerformanceCounter.Initialize() at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value) at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
    Last worker process info : System.ArgumentException: Process with an Id of 5264 is not running. at System.Diagnostics.Process.GetProcessById(Int32 processId, String machineName) at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
    Processes running while Performance counter failed to update: 984 svchost 2952 rotatelogs 2360 conhost 6296 WmiPrvSE 1372 NSClient++ 564 lsass 8036 powershell 2944 cmd 2352 cmd 1896 exfba 25748 conhost 7076 store 2936 rotatelogs 372 csrss 10024 fscvsswriter
    1552 rotatelogs 8436 MSExchangeTransport 2928 cmd 4304 msexchangerepl 1544 FSCMonitor 164 svchost 556 services 6264 beremote 2524 Exclaimer.Connectors.MailRules.ExchangeUpdateService 1108 bedbg 4492 FSCController 748 svchost 4964 WmiPrvSE 9972 svchost 4484
    MSExchangeMailboxReplication 1724 inetinfo 5872 MSExchangeTransportLogSearch 2116 cpqnimgt 34620 conhost 5660 MSExchangeThrottling 7432 FSCScheduledScanner 4720 WmiPrvSE 928 svchost 1852 WmiPrvSE 1516 FSCEventing 1980 SMSvcHost 11804 svchost 3876 Microsoft.Exchange.EdgeSyncSvc
    5252 Microsoft.Exchange.Search.ExSearch 10176 w3wp 1704 hpwmistor 9764 svchost 2684 Microsoft.Exchange.AntispamUpdateSvc 516 winlogon 10956 MonitoringHost 2088 svchost 2480 conhost 9852 FSEMailPickup 2280 cqmgstor 1884 cmd 1684 sysdown 1288 vcagent 672 svchost
    1088 svchost 8572 FSCTransportScanner 6404 w3wp 4236 FSCTransportScanner 11936 MonitoringHost 8568 conhost 2460 rotatelogs 4428 Microsoft.Exchange.RpcClientAccess.Service 880 svchost 4716 Microsoft.Exchange.Pop3 7376 FSCRealtimeScanner 480 svchost 8556 EdgeTransport
    4024 MsExchangeFDS 2248 cqmgserv 840 svchost 276 smss 1260 w3wp 9728 svchost 7328 FSCRealtimeScanner 3028 hpsmhd 4080 FSCConfigurationServer 34088 TrustedInstaller 8088 w3wp 1052 spoolsv 1248 cpqrcmc 4836 conhost 9320 w3wp 7544 taskeng 5376 Microsoft.Exchange.ServiceHost
    1632 svchost 1628 snmp 7536 FSCRealtimeScanner 836 FSCTransportScanner 1032 conhost 1228 cissesrv 8712 FSCTransportScanner 15700 cmd 436 wininit 828 LogonUI 1812 smhstart 2400 hpsmhd 428 csrss 21176 w3wp 13032 Microsoft.Exchange.Monitoring 6520 mad 4800 MSExchangeMailSubmission
    4360 Microsoft.Exchange.Pop3Service 8944 FSEContentScanner64 1932 msftesql 6324 w3wp 4216 cqmghost 572 lsm 8764 powershell 1592 HealthService 4152 MSExchangeMailboxAssistants 2304 Exclaimer.PolicyProcessingEngine.RemoteDeploymentService 9944 svchost 2572 Microsoft.Exchange.AddressBook.Service
    2492 cmd 1388 Exclaimer.PolicyProcessingEngine.ConfigurationService 1780 MSExchangeADTopologyService 4536 Microsoft.Exchange.ProtectedServiceHost 4 System 11844 msdtc 7488 FSCRealtimeScanner 7520 WmiPrvSE 0 Idle Performance Counters Layout information: FileMappingNotFoundException
    for category MSExchange Active Manager Client : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name : Global\netfxcustomperfcounters.1.0msexchange active manager client at Microsoft.Exchange.Diagnostics.FileMapping.OpenFileMapping(String
    name, Boolean writable) at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable) at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable) at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String
    categoryName)
    Same error is coming for diffrent performance counter as well like ..MSExchange Throttling, MSExchange Middle-Tier Storage, MSExchange ResourceHealth.
    Could some one help me on the same.
    Above steps can be follow to avoid this error???
    Thanks in Advance.

  • Different movement types for store Physical Count process

    Hi Experts
    Would like to ask for your advice in terms of using different movement types for physical inventory process.
    The scenario is like this:
    1) Our client uses different counting processes for store inventory, with both annual full stock take AND spontaneous ad-hoc counting which is more frequent and involve probably around 30 articles a week.
    2) Both types of counting involve count result interface from a 3rd party POS system
    3) Since it is count result interface, we are considering the standard PI process (MI01, MI04, MI07, MI31, MI20, etcetc)
    4) However the standard movement type is 701/702 while our client request a different financial posting, hence different movement types, for the ad-hoc counting
    So the question is very simple: Is there a way for SAP to determine using 701/702 when it is a full stock take, while using another set of Z-movement types when it is a ad-hoc count. Bare in mind that both information are the count result, not a variance adjustment, from external POS system.
    Appreciate very much for your help!
    BR
    Dom

    System determine 701/702 in the IMS . refer t code OBYC - Trans GBB-  gen modfier INV - GL Account assignment.
    regards
    manu

  • Two different billing document types for 1 sales document type.

    Hi Gurus,
    I have a requirement , wherein our client is having counter  sale.
    He is using one sales doc type , and while creating a order , he is manually adding payment terms.
    Requirement is , if the payment terms are cash, billing doc type created later on should be one , else during credit sales , billing document type should be different.
    As per my understanding this is not possible.
    Want to know if anyone has some different thought on this.
    Thanks in advance
    Nilesh.

    Dear Nilesh,
    There two options you can look in to
    One option is
    1.You can define different sales document types for cash and credit.
    2. You can define two different billing documents.
    3.Do the copy control settings for each combination
    Cash sales order >Delivery>Cash invoice
    Credit sales order >Delivery>Credit invoice
    Second option is
    1. You can maintain single sales document for both the processes.
    2.Define two different billing types then do the copy control settings for both billing types.
    But in this option user need to select the billing type manually based on the process while creating billing document.
    I hope this will help you,
    Regards,
    Murali.

  • Output type for Delivery note missing for shipping point

    Hi all,
       I have a plant setup to email delivery note which uses shipping point SGUS.  Condition record is setup for this shipping point using Del Typ/Shipping Point /Plant.  This uses the communication stragery ZINT.
    The email works well for this shipping point.  However, when delivery cannot be email using shipping point CHAL.  I guess this plant has 2 shipping points (sgus and chal).
    When delivery is created, output type for email is missing.   I already created condition rec
    for LF/CHAL/plant 121.  Still not working.
    Can anyone pls provide any suggestions ASAP ?
    Thanks
    Joyce

    Hi MdZ,
       I looked at the analysis output.  ZD04 output is what i am after.  Don't understand the followings:
    Q1 - why the ordering in anaylsis is different than in output determination procedure. For example:
    In Analysis Output: i have:
    LDOO    -  Output not found
    MAIL     - manual output
    PLOO    - Output not found
    Z940    - Output found
    ZBOL   - Output not found
    ZD04   - OUTPUT NOT FOUND
    The Output Determination Procedure as:
    Step  Counter   CType
    10       1           LD00
    12       1           ZLFX
    13       0           LALE
    14       1           ZBOL
    20        2          MAIL
    75       1           ZD04
    90       1           PL00
    110      1          Z940
    Step 10 should be read , then step 12, and so on.  Why is the ordering in procedure different than in
    output analysis ?
    Q2. Why did it display ZD04 not found when ZD04 appear on the delivery output as green light ? When i drill down, it show 2 access sequence.  Access 10 stated Output found.  Access 20 stated Output not found.
    Thank you.
    Joyce

  • Custom movement type for automatic movement

    Hi,
    We are doing cycle count inventory using warehouse management. When we clear the difference, system posts material document with movement types 711 or 712 for loss or gain.
    We need to clear the difference for some materials using seperate movement types for reporting purpose. So, we created new movement types 911 / 912 and assigned the transactions to it in "Materials Management-Inventory Management and Physical Inventory-Movement Types-Copy, Change Movement Types". However, system still takes movement type 711 / 712.
    Also, I think if we make it work, it will be applicable to all materials and not certain materials.
    Any idea where I need to configure other than above setting?
    Shekhar

    Hi,
    You have created a new movement types, but check whether you have defined this movement types in WM.
    Please maintain the Customizing entry in the below mentioned path,
    goto >> SPRO->Logistics Execution->Warehouse Management->Activities->Transfers->Define Movement Types
    Maintain your entry here and save the customization settings.
    This movement types will be applicable to all the material unless and until you specify some special stock indicator while modifying the movement type.

  • "frags delayed" counter incrementing for Voice PVC

    Hi,
    We are using VoFR between two Cisco 2610 using FXO\FXS Cards. It is a point-point link with two PVCs, one for Voice and one for Data.
    I have implemented Traffic-Shaping and FRF. However when i do a "show frame pvc " command, i can see "frags delayed"counter incrementing for the Voice PVC, indiciating delay in sending packets and thus compromising Voice Quality.
    1. Is it normal to have this counter increasing ? What is the acceptable percentage i.e "frags delayed \ total frags" ?
    2. Is there anything i can do ? Would PVC Priority Queuing help ?
    I need to be sure if PVC Priority is the solution, as we would have to do a Flash Upgrade to install the new software with this feature.
    ++++++++++++++++++++++++++
    show frame pvc 103
    PVC Statistics for interface Serial0/0 (Frame Relay DTE)
    DLCI = 103, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/0.3
    input pkts 373951 output pkts 374604 in bytes 11542352
    out bytes 12245392 dropped pkts 0 in FECN pkts 0
    in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
    in DE pkts 0 out DE pkts 0
    out bcast pkts 5474 out bcast bytes 1571038
    pvc create time 11w3d, last time pvc status changed 04:06:31
    Service type VoFR-cisco
    Voice Queueing Stats: 0/100/0 (size/max/dropped)
    Current fair queue configuration:
    Discard Dynamic Reserved
    threshold queue count queue count
    64 16 2
    Output queue size 0/max total 600/drops 0
    configured voice bandwidth 30000, used voice bandwidth 0
    fragment type VoFR-cisco fragment size 320
    cir 32000 bc 320 be 0 limit 40 interval 10
    mincir 32000 byte increment 40 BECN response no
    frags 374604 bytes 12261814 frags delayed 6501 bytes delayed 1609296
    shaping inactive
    traffic shaping drops 0
    +++++++++++++++++++++++++++++++++++

    The following links explains the delay in voice traffic and gow to do traffic policing
    VoIP over Frame Relay with QoS (Fragmentation, Traffic Shaping, LLQ / IP RTP Priority)
    http://www.cisco.com/warp/public/788/voice-qos/voip-ov-fr-qos.html#15
    Troubleshooting Output Drops with Priority Queueing
    http://www.cisco.com/warp/public/105/priorityqueuedrops.html
    Understanding Delay in Packet Voice Networks
    http://www.cisco.com/warp/public/788/voip/delay-details.html
    Voice QoS: ToS-CoS Mapping Via LLQ
    http://www.cisco.com/warp/public/788/voice-qos/tos-cos.html
    Frame Relay Traffic Shaping for VoIP and VoFR
    http://www.cisco.com/warp/public/788/voip/fr_traffic.html

  • Impact of wrong DNS in DHCP scope for CCM

    We recently deployed some phones at a new site  which were displaying  error messages on the screen
    The initial issue was that Option 150 as not set up - resolved-
    Phone now seemed to register to CCM (8.6) - IP address located to phone but CCM was showing rejected  on the phone page 
    Phone displayed error  messages "Db config." and "Security"  
    Db Config looked like it was that no phone was configured/MAC address, phone type etc  - incorrect double checked all ok
    Other could be replication between Cluster but again all ok
    Security error - Led me to look at the security trust list and delete it and as normally this solves the problem
    The actual issue/resolution  was incorrect DNS name in the Option 15 of the scope - e.g xxxx.net instead of xxx.com 
    Why would this lead to the above issues, I thought the main requirement was the 150 for the TFTP 
    Any thoughts, answers
    Many thanks

    The issue was that there was an incorrect DNS option 15 given out e.g mycompany.com  instead of the correct one of mycompany.com, Option 150 was an IP as normal 
    I think the issue was as follows
    Our CCM`s have host names such XXX-CMSUB1, XXX-CMSUB2 etc instead of IP address- before I joined. If my thinking is correct the phone received its TFTP as normal and was provided with the CM Group but in our case the group contained Host names instead of IP address. The Host names were then added to the Option 15 DNS    and so the phones tried to look for CCM`s at XXX-CMSUB1.mycompnaya.net and XXX-CMSUB2.mycompanya.net which failed since DNS has the CCM`s as XXX-CMSUB1.mycompnaya.com and XXX-CMSUB2.mycompanya.com
    Does this make sense , if so why the Security and db config issue unless these are standard error messages?

  • Output type for goods receipt

    Hi guys,
    Can any one lemme know what is the output  type we can use for goods receipt- for generating a  goods receipt smartform output?
    and can u also lemme know the standard print program also.
    if u have written any zprint program plz send it ASAP.
    thanks n regards,
    Bhargava.

    u can see the output types for Goods Receipt in Transaction NACE. Application M1
    Output type        Name
    CHKL     Count List ( Program RTCHECKL, form RT_CHECK_LIST)
    GRPL     Pallet Sticker ( Pro RTCHECKL, form RT_PALLET_LABEL)
    The Form names mentioned are SAPSCRIPTS not smartforms.
    Also Bhargava, chk out with ur Consultant wat output type suits ur requirement coz there r multiple options as u can see for urself in NACE under Applications M1/ME.
    Hope it helps.
    Regards,
    Bikash
    Message was edited by: Bikash  Agarwal
    Message was edited by: Bikash  Agarwal

  • Capturing Counter Readings for Usage Based Contracts

    Hi,
    I need clarification regarding capturing the Counter Readings for Usage Based Contracts. Which is it better to capture Counter Readings..in Service Contracts module or in Install Base ?.
    I am new to Usage Based Contracts and need to understand this.
    Gurus, Appreciate your quick responses.
    Thanks,
    Sid

    Hi All,
    Has anyone used the API's for capturing the counter readings.
    As far as I know, we need to use the public APIs of CS_CTR_CAPTURE_READING_PUB in the following sequence:
    CS_CTR_CAPTURE_READING_PUB.PRE_CAPTURE_COUNTER_READING--retrieve the counter_group_log_id and pass it to the next api
    CS_CTR_CAPTURE_READING_PUB.CAPTURE_COUNTER_READING and then call the API
    CS_CTR_CAPTURE_READING_PUB.POST_CAPTURE_COUNTER_READING.
    Has anyone used the API CS_CTR_CAPTURE_READING_PUB.PRE_CAPTURE_COUNTER_READING?
    I want to know what values are passed into the record type CTR_GRP_LOG_Rec_Type.
    Can anyone tell me what has to be passed, please?
    Thanks!

  • Quick Exchange 2010 Perfmon Counter question

    So in the following article:
    http://technet.microsoft.com/en-us/library/ee832791.aspx
    Under the section where it speaks about calculating your IOPS per Mailbox Server is says to track the Perfmon Counter "MSExchange Database ==>
    Instances ->Database Maintenance IO Reads/sec" to use in your calculations.
    My issue is that I don't see that counter at all when pulling counters from my Exchange 2010 mailbox servers.  I have "Database Maintenance
    Duration" and "Database Maintenance Pages Bad Checksums" but no "Database Maintenance IO Reads/sec" under "MSExchange
    Database ==> Instances"
    Am I looking in the wrong spot? 
    Exchange 2010 SP2

    Hi
    Sorry, this link was kept in my Favorite years ago, I did not notice it had be removed.
    After researching, I found
    "It is no longer necessary to pick the correct counters for the Exchange Server Roles that are installed as this script will automatically detect the roles installed and will add the appropriate counters for each role detected."
    http://archive.msdn.microsoft.com/ExPerfwiz
    So on that link, you can ExPerfWiz, it is a powershell based script to help automate the collection of performance data on Exchange 2007 and Exchange 2010 servers, you can download from here
    http://archive.msdn.microsoft.com/ExPerfwiz/Release/ProjectReleases.aspx?ReleaseId=5859
    Hope that could help
    Cheers
    Zi Feng
    TechNet Community Support

  • UCCE for CCM failover with DNS SRV.

    we are testing UCCE for CCM failover with Local DNS SRV. We have enabled the "Use DNS SRV type query:YES"&"Resolve SRV records locally:1" on CVP Call server configuration SIP tab.
    The srv.xml file updated with CCM  IP addrs in this path \Cisco\CVP\conf\srv.xml
    On testing, the agent state moved to reserved state, but call is not delivered. Static Route is added for Phone Extension as "500>,proxy.ipcc.com".
    What will be the issue? Kindly let me know what needs to be done.
    Thanks & Regards
    JP.

    So, as Markus already figured out, you need to make sure that your CUCM actually understands that it is the intended recipient for these SIP INVITEs. I.e. if you define the static route to point to cucm.cisco.com you have to specificy the specify the Custer FQDN to be cucm.cisco.com under the 'Cluster Wide Domain Settings' in the CUCM Enterprise Parameters.
    A second thing to watch out for the CUCM Group assigned to your SIP Trunks. Each SIP Trunk, like any CUCM device, has a Device Pool, the device pool has a UCM Group defining on which UCM nodes that device 'exists'. For phones that typically means : which UCM nodes can I register to ?
    But for SIP trunks this means : which UCM nodes have a SIP deamon process for this Trunk and so which of the UCM nodes will actually accept INVITEs for this trunk. The most common cause for 503 Service Unavailable is probably this, (not all) the CUCM nodes in your DNS / srv.xml round robin are in the UCM Group assigned to the Device Pool configured on the SIP trunk for this Call Server.
    Cheers,
    Kris

  • DATE_DIFF (ZSMOP,ZSMCL) the type for ZNODAY

    Hi selected that formula DATE_DIFF (ZSMOP,ZSMCL) the type for ZNODAY key is "Number" of type DEC as Counter. I am getting the result like this
    ZSMOP = 01/01/1999
    ZSMCL = 31/12/2007
    DATE_DIFF ZNODAY = 3.286,000
    Correct result should be 3, 286,000
    How to fix this dot after 3 . 286 it should be comma
    can you help with exact steps.
    Thanks
    Soniya

    I changed that but still it is showing 3.284 and not 3,284
    did i have log off complete shut down system and restart
    is that every user should do or is there any easy solution at reporting or cube level.
    i tried changing the key figure additional properties tab  Display to "in 1" BUT still the same thing
    please help
    thanks
    soniya

  • Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /

    Guyz,
    Firstly despite the plant+storage location + warehouse no. assignments are done , my replenishment delivery (delivery for stock transport order between plants under same company code) is not picking up storage location and warehouse no and thus stopping me from doing picking and PGI (post goods issue).
    However in VL02N when i'm trying to change storage location for line item, i'm getting following weird error
    *Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /*
    I found a SAP Note(133223) regarding this error and VL02 transaction but that note was specific to older versions. I'm on ECC 6.0
    Any suggestions please ?
    Thanks

    Warehouse managment has its own movement types, most identical to inventory management movement types.
    These WM movement types are determined via reference movement types.
    the error you have just looks like your customizing is not complete.
    IMG > LE > WM > Interfaces > IM > define movement types.

  • Cannot obtain an appropriate JDBC type for class char.

    The above error while deploying...The full error is below. The only datatypes used are: integer, timestamp,string, decimal and date (so no char).  Can anybody help?
    Caught exception during application deployment from SAP J2EE Engine's deploy service:
    java.rmi.RemoteException: Cannot deploy application sap.com/SAPAS12013.. Reason: Cannot obtain an appropriate JDBC type for class char. To store the field with this class in the database, the class must implement java.io.Serializable.; nested exception is: com.sap.engine.services.deploy.container.DeploymentException: <--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='com.sap.engine.services.ejb.exceptions.deployment.EJBDeploymentException: Cannot obtain an appropriate JDBC type for class char. To store the field with this class in the database, the class must implement java.io.Serializable.
    at com.sap.engine.services.ejb.deploy.tools.sql.Mappings.getDefaultSqlTypeForJavaType(Mappings.java:131)
    at com.sap.engine.services.ejb.deploy.xml.CMPParser.fillCmpFieldInfo(CMPParser.java:89)
    at com.sap.engine.services.ejb.deploy.xml.CMPParser.parseCMPFields(CMPParser.java:644)
    at com.sap.engine.services.ejb.deploy.xml.CMPParser.parseFields(CMPParser.java:121)
    at com.sap.engine.services.ejb.deploy.xml.EJBJarParser.parseXml(EJBJarParser.java:173)
    at com.sap.engine.services.ejb.deploy.xml.EJBJarParser.parseXml(EJBJarParser.java:97)
    at com.sap.engine.services.ejb.deploy.DeployAdmin.parseSingleJar(DeployAdmin.java:296)
    at com.sap.engine.services.ejb.deploy.DeployAdmin.generate(DeployAdmin.java:246)
    at com.sap.engine.services.ejb.EJBAdmin.deploy(EJBAdmin.java:2118)
    at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:594)
    at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:379)
    at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:296)
    at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:290)
    at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:323)
    at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3033)
    at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:463)
    at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
    at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:294)
    at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:183)
    at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:119)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
    at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)

    Hi Ashley,
    And yet, apparently you have a cmp-field with type <b>char</b> in one of your CMP entity beans. This is not supported. Please refer to the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/13/dbb2b66146934a9662918755038ea1/frameset.htm">Object/Relational Mapping Rules</a> and especially to the first bullet under the table.
    Hope that helps!
    Vladimir

Maybe you are looking for